Debian Installer sublevel 1: Yet another tentative to get files completed...sublevel 5

[Christian Perrier <bubulle@debian.org>]

Hi,

Once again, I'm trying to get translations completed for Debian
Installer. Attached is sublevel 5 for your language, which is
currently incomplete.

Please consider completing and committing it (feel free to ask me in
case you have trouble committing).

There is no strict deadline, but Debian will likely release in 2012,
so it really begins to be worrying when languages are not complete in
D-I.

Thanks in advance,


# Catalan messages for debian-installer.
# Copyright 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2010 Software in the Public Interest, Inc.
# This file is distributed under the same license as debian-installer.
# Jordi Mallach <jordi@debian.org>, 2002, 2003, 2004, 2006, 2007, 2008, 2010.
# Guillem Jover <guillem@debian.org>, 2005, 2007.
#
msgid ""
msgstr ""
"Project-Id-Version: debian-installer squeeze\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2011-11-27 22:51+0000\n"
"PO-Revision-Date: 2010-10-18 21:17+0200\n"
"Last-Translator: Jordi Mallach <jordi@debian.org>\n"
"Language-Team: Catalan <debian-l10n-catalan@lists.debian.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#. Type: text
#. Description
#. :sl5:
#: ../partman-base.templates:60001
#, no-c-format
msgid "ZFS pool %s, volume %s"
msgstr ""

#. Type: text
#. Description
#. :sl5:
#: ../partman-base.templates:62001
#, no-c-format
msgid "DASD %s (%s)"
msgstr "DASD %s (%s)"

#. Type: text
#. Description
#. :sl5:
#: ../partman-base.templates:63001
#, no-c-format
msgid "DASD %s (%s), partition #%s"
msgstr "DASD %s (%s), partició no. %s"

#. Type: text
#. Description
#. :sl5:
#. Setting to reserve a small part of the disk for use by BIOS-based bootloaders
#. such as GRUB.
#: ../partman-partitioning.templates:36001
msgid "Reserved BIOS boot area"
msgstr "Àrea reservada per a l'arrencada BIOS"

#. Type: text
#. Description
#. :sl5:
#. short variant of 'Reserved BIOS boot area'
#. Up to 10 character positions
#: ../partman-partitioning.templates:37001
msgid "biosgrub"
msgstr "biosgrub"

#. Type: text
#. Description
#. :sl5:
#: ../partman-efi.templates:1001
msgid ""
"In order to start your new system, the firmware on your Itanium system loads "
"the boot loader from its private EFI partition on the hard disk.  The boot "
"loader then loads the operating system from that same partition.  An EFI "
"partition has a FAT16 file system formatted on it and the bootable flag set. "
"Most installations place the EFI partition on the first primary partition of "
"the same hard disk that holds the root file system."
msgstr ""
"Per a iniciar el sistema nou, el microprogramari al vostre sistema Itanium "
"carrega el carregador des de la seua partició EFI privada del disc dur. "
"Aleshores el carregador inicia el sistema operatiu des d'aquesta mateixa "
"partició. Una partició EFI té un sistema de fitxers FAT16 formatat en ella i "
"el senyalador d'arrencable establert. La majoria de les instaŀlacions "
"ubiquen la partició EFI a la primera partició primària del mateix disc on "
"està el sistema de fitxers arrel."

#. Type: text
#. Description
#. :sl5:
#. Type: text
#. Description
#. :sl5:
#: ../partman-efi.templates:2001 ../partman-efi.templates:4001
msgid "EFI boot partition"
msgstr "Partició d'arrencada EFI"

#. Type: boolean
#. Description
#. :sl5:
#: ../partman-efi.templates:3001
msgid "No EFI partition was found."
msgstr "No s'ha trobat cap partició EFI."

#. Type: text
#. Description
#. :sl5:
#. short variant of 'EFI boot partition'
#. Up to 10 character positions
#: ../partman-efi.templates:5001
msgid "EFIboot"
msgstr "arrencadaEFI"

#. Type: text
#. Description
#. :sl5:
#: ../partman-efi.templates:7001
msgid "EFI-fat16"
msgstr "EFI-fat16"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:1001
msgid ""
"No partitions were found in your system. You may need to partition your hard "
"drives or load additional kernel modules."
msgstr ""
"No s'ha trobat cap partició al vostre sistema. És possible que necessiteu "
"partir el vostre disc dur o carregar mòduls del nucli addicionals."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:2001
msgid "No file systems found"
msgstr "No s'ha trobat cap sistema de fitxers"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:2001
msgid ""
"No usable file systems were found. You may need to load additional kernel "
"modules."
msgstr ""
"No s'ha trobat cap sistema de fitxers usable. És possible que necessiteu "
"carregar mòduls del nucli addicionals."

#. Type: select
#. Choices
#. :sl5:
#: ../partconf.templates:3001
msgid "Abort"
msgstr "Avorta"

#. Type: select
#. Choices
#. :sl5:
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partconf.templates:4001
msgid "Leave the file system intact"
msgstr "Deixa el sistema de fitxers intacte"

#. Type: select
#. Choices
#. :sl5:
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. Type: select
#. Choices
#. :sl5:
#. Note to translators : Please keep your translations of each choice
#. (separated by commas)
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partconf.templates:4001 ../partconf.templates:5001
msgid "Create swap space"
msgstr "Crea espai d'intercanvi"

#. Type: select
#. Description
#. :sl5:
#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:4002 ../partconf.templates:5002
msgid "Action on ${PARTITION}:"
msgstr "Acció sobre ${PARTITION}:"

#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:4002
msgid ""
"This partition seems to already have a file system (${FSTYPE}). You can "
"choose to leave this file system intact, create a new file system, or create "
"swap space."
msgstr ""
"Aquesta partició sembla tindre ja un sistema de fitxers (${FSTYPE}). Podeu "
"triar deixar aquest sistema de fitxers intacte, o crear un sistema de "
"fitxers o espai d'intercanvi."

#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:5002
msgid ""
"This partition does not seem to have a file system. You can create a file "
"system or swap space on it."
msgstr ""
"Aquesta partició sembla no tindre un sistema de fitxers. Podeu crear un "
"sistema de fitxer o espai d'intercanvi en ella."

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of each choice
#. (separated by commas)
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. :sl5:
#. "it" is a partition
#: ../partconf.templates:6001
msgid "Don't mount it"
msgstr "No la muntes"

#. Type: select
#. Description
#. :sl5:
#. Type: string
#. Description
#. :sl5:
#: ../partconf.templates:6002 ../partconf.templates:7001
msgid "Mount point for ${PARTITION}:"
msgstr "Punt de muntatge per a ${PARTITION}:"

#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:6002
msgid ""
"When a partition is mounted, it is available to the users of the system. You "
"always need a root (\"/\") partition, and it's often good to have a separate "
"partition for /home."
msgstr ""
"Quan es munta una partició, aquesta és disponible per als usuaris del "
"sistema. Sempre necessiteu una partició arrel («/»), i moltes vegades és bo "
"tindre una partició separada per a /home."

#. Type: string
#. Description
#. :sl5:
#: ../partconf.templates:7001
msgid "Please enter where the partition should be mounted."
msgstr "Seleccioneu on s'ha de muntar la partició."

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:8001
msgid "Do you want to unmount the partitions so you can make changes?"
msgstr "Voleu desmuntar les particions per a que es puguen fer els canvis?"

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:8001
msgid ""
"Since the partitions have already been mounted, you cannot do any changes."
msgstr "Com les particions ja estan muntades, no hi podeu fer canvis."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:9001
msgid "Failed to unmount partitions"
msgstr "No s'han pogut desmuntar les particions"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:9001
msgid "An unexpected error occurred while unmounting the partitions."
msgstr "S'ha produït un error inesperat quan es desmuntaven les particions."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:9001
msgid "The partition configuration process has been aborted."
msgstr "S'ha avortat el procés de configuració de les particions."

#. Type: text
#. Description
#. :sl5:
#: ../partconf.templates:10001
#, no-c-format
msgid "Create %s file system"
msgstr "Crea un sistema de fitxers %s"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:11001
msgid "No root partition (/)"
msgstr "No hi ha partició arrel (/)"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:11001
msgid ""
"You need a root partition. Please assign a partition to the root mount point "
"before continuing."
msgstr ""
"Necessiteu una partició arrel. Si us plau, assigneu una partició al punt de "
"muntatge arrel abans de continuar."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:12001
msgid "Partition assigned to ${MOUNT}"
msgstr "La partició s'ha assignat a ${MOUNT}"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:12001
msgid "Mounting a partition on ${MOUNT} makes no sense. Please change this."
msgstr "Muntar una partició a ${MOUNT} no té sentit. Si us plau, canvieu açò."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:13001
msgid "Several partitions assigned to ${MOUNT}"
msgstr "Hi han diverses particions assignades a ${MOUNT}"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:13001
msgid ""
"You cannot assign several partitions to the same mount point. Please change "
"all but one of them."
msgstr ""
"No podeu assignar diverses particions al mateix punt de muntatge. Canvieu-"
"les totes tret d'una."

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:14001
msgid "Ready to create file systems and mount partitions?"
msgstr ""
"Esteu preparats per a crear els sistemes de fitxers i muntar les particions?"

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:14001
msgid "File systems will be created and partitions mounted."
msgstr "Es crearan els sistemes de fitxers i es muntaran les particions."

#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:14001
msgid ""
"WARNING: This will destroy all data on the partitions you have assigned file "
"systems to."
msgstr ""
"AVÍS: Això destruirà totes les dades a les particions a les quals heu "
"assignat sistemes de fitxers."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:15001
msgid "Failed to create swap space on ${PARTITION}"
msgstr "No s'ha pogut crear espai d'intercanvi a ${PARTITION}"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:15001
msgid "An error occurred when the swap space was created on ${PARTITION}."
msgstr "S'ha produït un error en crear l'espai d'intercanvi a ${PARTITION}."

#. Type: error
#. Description
#. :sl5:
#. Type: error
#. Description
#. :sl5:
#. Type: error
#. Description
#. :sl5:
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:15001 ../partconf.templates:16001
#: ../partconf.templates:17001 ../partconf.templates:18001
msgid ""
"Please check the error log on the third console or /var/log/messages for "
"more information."
msgstr ""
"Si us plau, comproveu el registre d'errors a la tercera consola o /var/log/"
"messages per a obtindre més informació."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:16001
msgid "Failed to activate the swap space on ${PARTITION}"
msgstr "No s'ha pogut activar l'espai d'intercanvi a ${PARTITION}"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:16001
msgid "An error occurred when the swap space on ${PARTITION} was activated."
msgstr "S'ha produït un error en activar l'espai d'intercanvi a ${PARTITION}."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:17001
msgid "Failed to create ${FS} file system on ${PARTITION}"
msgstr "No s'ha pogut crear el sistema de fitxers ${FS} a ${PARTITION}"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:17001
msgid ""
"An error occurred when the ${FS} file system was created on ${PARTITION}."
msgstr ""
"S'ha produït un error en crear el sistema de fitxers ${FS} a la partició "
"${PARTITION}."

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:18001
msgid "Failed to mount ${PARTITION} on ${MOUNT}"
msgstr "No s'ha pogut muntar ${PARTITION} a ${MOUNT}"

#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:18001
msgid "An error occurred when ${PARTITION} was mounted on ${MOUNT}."
msgstr "S'ha produït un error quan s'ha muntat ${PARTITION} a ${MOUNT}."

#. Type: text
#. Description
#. Main menu item
#. :sl5:
#: ../partconf.templates:19001
msgid "Configure and mount partitions"
msgstr "Configura i munta particions"

#. Type: select
#. Description
#. :sl5:
#: ../partitioner.templates:1002
msgid "Disk to partition:"
msgstr "Disc a partir:"

#. Type: select
#. Description
#. :sl5:
#: ../partitioner.templates:1002
msgid "Please choose one of the listed disks to create partitions on it."
msgstr ""
"Si us plau, seleccioneu un dels discs llistats per a crear-hi particions."

#. Type: select
#. Description
#. :sl5:
#: ../partitioner.templates:1002 ../s390-dasd.templates:1002
msgid "Select \"Finish\" at the bottom of the list when you are done."
msgstr "Seleccioneu «Finalitza» al final de la llista quan hàgeu acabat."

#. Type: error
#. Description
#. :sl5:
#: ../partitioner.templates:2001
msgid "No disk found"
msgstr "No s'ha trobat cap disc"

#. Type: error
#. Description
#. :sl5:
#: ../partitioner.templates:2001
msgid ""
"Unable to find any disk in your system. Maybe some kernel modules need to be "
"loaded."
msgstr ""
"No s'ha trobat cap disc al vostre sistema. Potser cal carregar alguns mòduls "
"del nucli."

#. Type: error
#. Description
#. :sl5:
#: ../partitioner.templates:3001
msgid "Partitioning error"
msgstr "S'ha produït un error en partir"

#. Type: error
#. Description
#. :sl5:
#: ../partitioner.templates:3001
msgid "Failed to partition the disk ${DISC}."
msgstr "No s'ha pogut partir el disc ${DISC}."

#. Type: text
#. Description
#. :sl5:
#. Main menu item
#: ../partitioner.templates:4001
msgid "Partition a hard drive"
msgstr "Parteix un disc dur"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "ctc: Channel to Channel (CTC) or ESCON connection"
msgstr "ctc: connexions Canal a Canal (CTC) o ESCON"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "qeth: OSA-Express in QDIO mode / HiperSockets"
msgstr "qeth: OSA-Express en mode QDIO / HiperSockets"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "iucv: Inter-User Communication Vehicle - available for VM guests only"
msgstr ""
"iucv: Inter-User Communication Vehicle - disponible per als convidats VM"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "virtio: KVM VirtIO"
msgstr ""

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:1002
msgid "Network device type:"
msgstr "Tipus de dispositiu de xarxa:"

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:1002
msgid ""
"Please choose the type of your primary network interface that you will need "
"for installing the Debian system (via NFS or HTTP). Only the listed devices "
"are supported."
msgstr ""
"Seleccioneu el tipus de la vostra interfície de xarxa primària que "
"necessitareu per instaŀlar el sistema Debian (per NFS o HTTP). Només es "
"suporten els dispositius llistats."

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:2001
msgid "CTC read device:"
msgstr "Dispositiu de lectura CTC:"

#. Type: select
#. Description
#. :sl5:
#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:2001 ../s390-netdevice.templates:3001
msgid "The following device numbers might belong to CTC or ESCON connections."
msgstr ""
"Els següents nombres de dispositius poden pertànyer a connexions CTC o ESCON."

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:3001
msgid "CTC write device:"
msgstr "Dispositiu d'escriptura CTC:"

#. Type: boolean
#. Description
#. :sl5:
#. Type: boolean
#. Description
#. :sl5:
#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:4001 ../s390-netdevice.templates:8001
#: ../s390-netdevice.templates:13001
msgid "Do you accept this configuration?"
msgstr "Accepteu aquesta configuració?"

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:4001
msgid ""
"The configured parameters are:\n"
" read channel  = ${device_read}\n"
" write channel = ${device_write}\n"
" protocol      = ${protocol}"
msgstr ""
"Els paràmetres configurats són:\n"
" canal de lectura   = ${device_read}\n"
" canal d'escriptura = ${device_write}\n"
" protocol           = ${protocol}"

#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:5001
msgid "No CTC or ESCON connections"
msgstr "No hi ha connexions CTC o ESCON"

#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:5001
msgid "Please make sure that you have set them up correctly."
msgstr "Assegureu-vos d'haver-les configurades correctament."

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:6001
msgid "Protocol for this connection:"
msgstr "Protocol per a aquesta connexió:"

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:7001
msgid "Device:"
msgstr "Dispositiu:"

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:7001
msgid "Please select the OSA-Express QDIO / HiperSockets device."
msgstr "Seleccioneu el dispositiu OSA-Express QDIO / HiperSockets."

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:8001
msgid ""
"The configured parameters are:\n"
" channels = ${device0}, ${device1}, ${device2}\n"
" port     = ${port}\n"
" portname = ${portname}\n"
" layer2   = ${layer2}"
msgstr ""
"Els paràmetres configurats són:\n"
" canals       = ${device0}, ${device1}, ${device2}\n"
" port         = ${port}\n"
" nom del port = ${portname}\n"
" layer2       = ${layer2}"

#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:9001
msgid "No OSA-Express QDIO cards / HiperSockets"
msgstr "No hi ha cap targeta OSA-Express QDIO / HiperSockets"

#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:9001
msgid ""
"No OSA-Express QDIO cards / HiperSockets were detected. If you are running "
"VM please make sure that your card is attached to this guest."
msgstr ""
"No s'ha detectat cap targeta OSA-Express QDIO / HiperSockets. Si esteu "
"executant VM assegureu-vos que la vostra targeta està connectada a aquest "
"hoste."

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:10001
msgid "Portname:"
msgstr "Nom del port:"

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:10001
msgid ""
"Please enter the portname of your OSA-Express card. This name must be 1 to 8 "
"characters long and must be equal on all systems accessing the same card."
msgstr ""
"Introduïu el nom del port de la vostra targeta OSA-Express. Aquest nom ha de "
"ser d'entre 1 i 8 caràcters de llarg i ha de ser igual en tots els sistemes "
"que accedeixen la mateixa targeta."

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:10001
msgid ""
"Leave it empty if you want to use HiperSockets. This parameter is required "
"for cards with microcode level 2.10 or later or when you want to share a "
"card."
msgstr ""
"Deixeu-ho en blanc si voleu utilitzar HiperSockets. Aquest paràmetre es "
"requereix per a targetes amb nivell de microprogramari 2.10 o posterior, o "
"quan voleu compartir una targeta."

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:10001
msgid "The name will automatically be converted to uppercase."
msgstr "El nom es convertirà automàticament a majúscules."

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:11001
msgid "Port:"
msgstr "Port:"

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:11001
msgid "Please enter a relative port for this connection."
msgstr "Especifiqueu un port relatiu per a aquesta connexió."

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:12001
msgid "Use this device in layer2 mode?"
msgstr "Voleu utilitzar aquest dispositiu en mode «layer2»?"

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:12001
msgid ""
"By default OSA-Express cards use layer3 mode. In that mode LLC headers are "
"removed from incoming IPv4 packets. Using the card in layer2 mode will make "
"it keep the MAC addresses of IPv4 packets."
msgstr ""
"Per defecte, les targetes OSA-Express utilitzen el mode layer3. En aquest "
"mode, s'eliminen les capçaleres LLC dels paquets IPv4 entrants. Si "
"s'utilitza la targeta en mode layer2, es conservaran les adreces MAC dels "
"paquets IPv4."

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:13001
msgid ""
"The configured parameter is:\n"
" peer  = ${peer}"
msgstr ""
"El paràmetre configurat és:\n"
" parell  = ${peer}"

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:14001
msgid "VM peer:"
msgstr "Parell VM:"

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:14001
msgid "Please enter the name of the VM peer you want to connect to."
msgstr "Introduïu el nom del parell VM al que voleu connectar."

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:14001
msgid ""
"If you want to connect to multiple peers, separate the names by colons, e."
"g.  tcpip:linux1."
msgstr ""
"Si voleu connectar a múltiples parells, separeu els noms amb dos punts, per "
"exemple tcpip:linux1."

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:14001
msgid ""
"The standard TCP/IP server name on VM is TCPIP; on VIF it's $TCPIP. Note: "
"IUCV must be enabled in the VM user directory for this driver to work and it "
"must be set up on both ends of the communication."
msgstr ""
"El nom del servidor TCP/IP estàndard en VM és TCPIP; en VIF és $TCPIP. Nota: "
"IUCV ha d'estar habilitat al directori de l'usuari de VM per a que aquest "
"controlador funcione i ha d'estar configurat en els dos extrems de la "
"comunicació."

#. Type: text
#. Description
#. Main menu item
#. :sl5:
#: ../s390-netdevice.templates:15001
msgid "Configure the network device"
msgstr "Configura el dispositiu de xarxa"

#. Type: select
#. Description
#. :sl5:
#: ../s390-dasd.templates:1002
msgid "Available devices:"
msgstr "Dispositius disponibles:"

#. Type: select
#. Description
#. :sl5:
#: ../s390-dasd.templates:1002
msgid ""
"The following direct access storage devices (DASD) are available. Please "
"select each device you want to use one at a time."
msgstr ""
"Els següents dispositius d'emmagatzemament d'accés directe (DASD) són "
"disponibles. Seleccioneu cada dispositiu que voleu utilitzar, d'un en un."

#. Type: string
#. Description
#. :sl5:
#: ../s390-dasd.templates:2001
msgid "Choose device:"
msgstr "Seleccioneu un dispositiu:"

#. Type: string
#. Description
#. :sl5:
#: ../s390-dasd.templates:2001
msgid ""
"Please choose a device. You have to specify the complete device number, "
"including leading zeros."
msgstr ""
"Seleccioneu un dispositiu. Heu d'especificar el nombre del dispositiu "
"complet, inclosos els zeros precedents."

#. Type: error
#. Description
#. :sl5:
#: ../s390-dasd.templates:3001
msgid "Invalid device"
msgstr "El dispositiu és invàlid"

#. Type: error
#. Description
#. :sl5:
#: ../s390-dasd.templates:3001
msgid "An invalid device number has been chosen."
msgstr "S'ha seleccionat un nombre de dispositiu invàlid."

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-dasd.templates:4001
msgid "Format the device?"
msgstr "Voleu formatar el dispositiu?"

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-dasd.templates:4001
msgid ""
"The installer is unable to detect if the device ${device} has already been "
"formatted or not. Devices need to be formatted before you can create "
"partitions."
msgstr ""
"L'instaŀlador no pot detectar si el dispositiu ${device} ha estat ja "
"formatat o no. Els dispositius s'hauran de formatar abans que pugueu crear-"
"hi particions."

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-dasd.templates:4001
msgid ""
"If you are sure the device has already been correctly formatted, you don't "
"need to do so again."
msgstr ""
"Si esteu segur de que el dispositiu ha estat ja correctament formatat, no "
"haureu de fer-ho un altre cop."

#. Type: text
#. Description
#. :sl5:
#: ../s390-dasd.templates:5001
msgid "Formatting ${device}..."
msgstr "S'està formatant ${device}..."

#. Type: text
#. Description
#. Main menu item. Keep translations below 55 columns
#. :sl5:
#: ../s390-dasd.templates:6001
msgid "Configure direct access storage devices (DASD)"
msgstr "Configura els dispositius d'emmagatzemament d'accés directe (DASD)"

#. Type: text
#. Description
#. Main menu item
#. :sl5:
#: ../zipl-installer.templates:1001
msgid "Install the ZIPL boot loader on a hard disk"
msgstr "Instaŀla el carregador ZIPL en un disc dur"