Debian Installer sublevel 1: Yet another tentative to get files completed...sublevel 5
Hi,
Once again, I'm trying to get translations completed for Debian
Installer. Attached is sublevel 5 for your language, which is
currently incomplete.
Please consider completing and committing it (feel free to ask me in
case you have trouble committing).
There is no strict deadline, but Debian will likely release in 2012,
so it really begins to be worrying when languages are not complete in
D-I.
Thanks in advance,
# Valencian (southern Catalan) messages for debian-installer.
# Copyright 2002, 2003, 2004, 2005, 2006, 2007 Software in the Public Interest, Inc.
# This file is distributed under the same license as debian-installer.
# Jordi Mallach <jordi@debian.org>, 2002, 2003, 2004, 2006, 2007.
# Guillem Jover <guillem@debian.org>, 2005, 2007.
# Robert Millan <rmh@aybabtu.com>, 2007
#
msgid ""
msgstr ""
"Project-Id-Version: debian-installer etch\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2011-11-27 22:51+0000\n"
"PO-Revision-Date: 2007-04-19 10:39+0200\n"
"Last-Translator: Robert Millan <rmh@aybabtu.com>\n"
"Language-Team: Catalan <debian-l10n-catalan@lists.debian.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#. Type: text
#. Description
#. :sl5:
#: ../partman-base.templates:60001
#, no-c-format
msgid "ZFS pool %s, volume %s"
msgstr ""
#. Type: text
#. Description
#. :sl5:
#: ../partman-base.templates:62001
#, no-c-format
msgid "DASD %s (%s)"
msgstr ""
#. Type: text
#. Description
#. :sl5:
#: ../partman-base.templates:63001
#, no-c-format
msgid "DASD %s (%s), partition #%s"
msgstr ""
#. Type: text
#. Description
#. :sl5:
#. Setting to reserve a small part of the disk for use by BIOS-based bootloaders
#. such as GRUB.
#: ../partman-partitioning.templates:36001
msgid "Reserved BIOS boot area"
msgstr ""
#. Type: text
#. Description
#. :sl5:
#. short variant of 'Reserved BIOS boot area'
#. Up to 10 character positions
#: ../partman-partitioning.templates:37001
msgid "biosgrub"
msgstr ""
#. Type: text
#. Description
#. :sl5:
#: ../partman-efi.templates:1001
msgid ""
"In order to start your new system, the firmware on your Itanium system loads "
"the boot loader from its private EFI partition on the hard disk. The boot "
"loader then loads the operating system from that same partition. An EFI "
"partition has a FAT16 file system formatted on it and the bootable flag set. "
"Most installations place the EFI partition on the first primary partition of "
"the same hard disk that holds the root file system."
msgstr ""
#. Type: text
#. Description
#. :sl5:
#. Type: text
#. Description
#. :sl5:
#: ../partman-efi.templates:2001 ../partman-efi.templates:4001
msgid "EFI boot partition"
msgstr ""
#. Type: boolean
#. Description
#. :sl5:
#: ../partman-efi.templates:3001
msgid "No EFI partition was found."
msgstr ""
#. Type: text
#. Description
#. :sl5:
#. short variant of 'EFI boot partition'
#. Up to 10 character positions
#: ../partman-efi.templates:5001
msgid "EFIboot"
msgstr ""
#. Type: text
#. Description
#. :sl5:
#: ../partman-efi.templates:7001
msgid "EFI-fat16"
msgstr ""
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:1001
msgid ""
"No partitions were found in your system. You may need to partition your hard "
"drives or load additional kernel modules."
msgstr ""
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:2001
msgid "No file systems found"
msgstr ""
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:2001
msgid ""
"No usable file systems were found. You may need to load additional kernel "
"modules."
msgstr ""
#. Type: select
#. Choices
#. :sl5:
#: ../partconf.templates:3001
msgid "Abort"
msgstr ""
#. Type: select
#. Choices
#. :sl5:
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partconf.templates:4001
msgid "Leave the file system intact"
msgstr ""
#. Type: select
#. Choices
#. :sl5:
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. Type: select
#. Choices
#. :sl5:
#. Note to translators : Please keep your translations of each choice
#. (separated by commas)
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partconf.templates:4001 ../partconf.templates:5001
msgid "Create swap space"
msgstr ""
#. Type: select
#. Description
#. :sl5:
#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:4002 ../partconf.templates:5002
msgid "Action on ${PARTITION}:"
msgstr ""
#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:4002
msgid ""
"This partition seems to already have a file system (${FSTYPE}). You can "
"choose to leave this file system intact, create a new file system, or create "
"swap space."
msgstr ""
#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:5002
msgid ""
"This partition does not seem to have a file system. You can create a file "
"system or swap space on it."
msgstr ""
#. Type: select
#. Choices
#. Note to translators : Please keep your translations of each choice
#. (separated by commas)
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. :sl5:
#. "it" is a partition
#: ../partconf.templates:6001
msgid "Don't mount it"
msgstr ""
#. Type: select
#. Description
#. :sl5:
#. Type: string
#. Description
#. :sl5:
#: ../partconf.templates:6002 ../partconf.templates:7001
msgid "Mount point for ${PARTITION}:"
msgstr ""
#. Type: select
#. Description
#. :sl5:
#: ../partconf.templates:6002
msgid ""
"When a partition is mounted, it is available to the users of the system. You "
"always need a root (\"/\") partition, and it's often good to have a separate "
"partition for /home."
msgstr ""
#. Type: string
#. Description
#. :sl5:
#: ../partconf.templates:7001
msgid "Please enter where the partition should be mounted."
msgstr ""
#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:8001
msgid "Do you want to unmount the partitions so you can make changes?"
msgstr ""
#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:8001
msgid ""
"Since the partitions have already been mounted, you cannot do any changes."
msgstr ""
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:9001
msgid "Failed to unmount partitions"
msgstr ""
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:9001
msgid "An unexpected error occurred while unmounting the partitions."
msgstr ""
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:9001
msgid "The partition configuration process has been aborted."
msgstr ""
#. Type: text
#. Description
#. :sl5:
#: ../partconf.templates:10001
#, no-c-format
msgid "Create %s file system"
msgstr ""
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:11001
msgid "No root partition (/)"
msgstr ""
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:11001
msgid ""
"You need a root partition. Please assign a partition to the root mount point "
"before continuing."
msgstr ""
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:12001
msgid "Partition assigned to ${MOUNT}"
msgstr ""
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:12001
msgid "Mounting a partition on ${MOUNT} makes no sense. Please change this."
msgstr ""
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:13001
msgid "Several partitions assigned to ${MOUNT}"
msgstr ""
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:13001
msgid ""
"You cannot assign several partitions to the same mount point. Please change "
"all but one of them."
msgstr ""
#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:14001
msgid "Ready to create file systems and mount partitions?"
msgstr ""
#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:14001
msgid "File systems will be created and partitions mounted."
msgstr ""
#. Type: boolean
#. Description
#. :sl5:
#: ../partconf.templates:14001
#, fuzzy
#| msgid ""
#| "WARNING: This will destroy all data on any partitions you have removed as "
#| "well as on the partitions that are going to be formatted."
msgid ""
"WARNING: This will destroy all data on the partitions you have assigned file "
"systems to."
msgstr ""
"AVÍS: Açò destruirà totes les dades a les particions que heu eliminat i a "
"les que es formataran."
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:15001
msgid "Failed to create swap space on ${PARTITION}"
msgstr ""
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:15001
msgid "An error occurred when the swap space was created on ${PARTITION}."
msgstr ""
#. Type: error
#. Description
#. :sl5:
#. Type: error
#. Description
#. :sl5:
#. Type: error
#. Description
#. :sl5:
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:15001 ../partconf.templates:16001
#: ../partconf.templates:17001 ../partconf.templates:18001
msgid ""
"Please check the error log on the third console or /var/log/messages for "
"more information."
msgstr ""
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:16001
msgid "Failed to activate the swap space on ${PARTITION}"
msgstr ""
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:16001
msgid "An error occurred when the swap space on ${PARTITION} was activated."
msgstr ""
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:17001
msgid "Failed to create ${FS} file system on ${PARTITION}"
msgstr ""
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:17001
msgid ""
"An error occurred when the ${FS} file system was created on ${PARTITION}."
msgstr ""
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:18001
msgid "Failed to mount ${PARTITION} on ${MOUNT}"
msgstr ""
#. Type: error
#. Description
#. :sl5:
#: ../partconf.templates:18001
msgid "An error occurred when ${PARTITION} was mounted on ${MOUNT}."
msgstr ""
#. Type: text
#. Description
#. Main menu item
#. :sl5:
#: ../partconf.templates:19001
msgid "Configure and mount partitions"
msgstr ""
#. Type: select
#. Description
#. :sl5:
#: ../partitioner.templates:1002
msgid "Disk to partition:"
msgstr ""
#. Type: select
#. Description
#. :sl5:
#: ../partitioner.templates:1002
msgid "Please choose one of the listed disks to create partitions on it."
msgstr ""
#. Type: select
#. Description
#. :sl5:
#: ../partitioner.templates:1002 ../s390-dasd.templates:1002
msgid "Select \"Finish\" at the bottom of the list when you are done."
msgstr ""
#. Type: error
#. Description
#. :sl5:
#: ../partitioner.templates:2001
msgid "No disk found"
msgstr ""
#. Type: error
#. Description
#. :sl5:
#: ../partitioner.templates:2001
msgid ""
"Unable to find any disk in your system. Maybe some kernel modules need to be "
"loaded."
msgstr ""
#. Type: error
#. Description
#. :sl5:
#: ../partitioner.templates:3001
#, fuzzy
msgid "Partitioning error"
msgstr "Partix els discs"
#. Type: error
#. Description
#. :sl5:
#: ../partitioner.templates:3001
msgid "Failed to partition the disk ${DISC}."
msgstr ""
#. Type: text
#. Description
#. :sl5:
#. Main menu item
#: ../partitioner.templates:4001
#, fuzzy
#| msgid "Partition disks"
msgid "Partition a hard drive"
msgstr "Partix els discs"
#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "ctc: Channel to Channel (CTC) or ESCON connection"
msgstr ""
#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "qeth: OSA-Express in QDIO mode / HiperSockets"
msgstr ""
#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "iucv: Inter-User Communication Vehicle - available for VM guests only"
msgstr ""
#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "virtio: KVM VirtIO"
msgstr ""
#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:1002
msgid "Network device type:"
msgstr ""
#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:1002
msgid ""
"Please choose the type of your primary network interface that you will need "
"for installing the Debian system (via NFS or HTTP). Only the listed devices "
"are supported."
msgstr ""
#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:2001
msgid "CTC read device:"
msgstr ""
#. Type: select
#. Description
#. :sl5:
#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:2001 ../s390-netdevice.templates:3001
msgid "The following device numbers might belong to CTC or ESCON connections."
msgstr ""
#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:3001
msgid "CTC write device:"
msgstr ""
#. Type: boolean
#. Description
#. :sl5:
#. Type: boolean
#. Description
#. :sl5:
#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:4001 ../s390-netdevice.templates:8001
#: ../s390-netdevice.templates:13001
msgid "Do you accept this configuration?"
msgstr ""
#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:4001
msgid ""
"The configured parameters are:\n"
" read channel = ${device_read}\n"
" write channel = ${device_write}\n"
" protocol = ${protocol}"
msgstr ""
#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:5001
msgid "No CTC or ESCON connections"
msgstr ""
#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:5001
#, fuzzy
#| msgid ""
#| "Please enter the same root password again to verify that you have typed "
#| "it correctly."
msgid "Please make sure that you have set them up correctly."
msgstr ""
"Si vos plau introduïu la mateixa contrasenya de root un altre cop per a "
"verificar que l'heu teclejada correctament."
#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:6001
msgid "Protocol for this connection:"
msgstr ""
#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:7001
msgid "Device:"
msgstr ""
#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:7001
msgid "Please select the OSA-Express QDIO / HiperSockets device."
msgstr ""
#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:8001
msgid ""
"The configured parameters are:\n"
" channels = ${device0}, ${device1}, ${device2}\n"
" port = ${port}\n"
" portname = ${portname}\n"
" layer2 = ${layer2}"
msgstr ""
#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:9001
msgid "No OSA-Express QDIO cards / HiperSockets"
msgstr ""
#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:9001
msgid ""
"No OSA-Express QDIO cards / HiperSockets were detected. If you are running "
"VM please make sure that your card is attached to this guest."
msgstr ""
#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:10001
#, fuzzy
msgid "Portname:"
msgstr "Partix els discs"
#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:10001
msgid ""
"Please enter the portname of your OSA-Express card. This name must be 1 to 8 "
"characters long and must be equal on all systems accessing the same card."
msgstr ""
#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:10001
msgid ""
"Leave it empty if you want to use HiperSockets. This parameter is required "
"for cards with microcode level 2.10 or later or when you want to share a "
"card."
msgstr ""
#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:10001
msgid "The name will automatically be converted to uppercase."
msgstr ""
#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:11001
msgid "Port:"
msgstr ""
#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:11001
#, fuzzy
#| msgid "Please enter the hostname for this system."
msgid "Please enter a relative port for this connection."
msgstr "Si vos plau, introduïu el nom que voleu assignar a aquest sistema."
#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:12001
msgid "Use this device in layer2 mode?"
msgstr ""
#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:12001
msgid ""
"By default OSA-Express cards use layer3 mode. In that mode LLC headers are "
"removed from incoming IPv4 packets. Using the card in layer2 mode will make "
"it keep the MAC addresses of IPv4 packets."
msgstr ""
#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:13001
msgid ""
"The configured parameter is:\n"
" peer = ${peer}"
msgstr ""
#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:14001
msgid "VM peer:"
msgstr ""
#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:14001
#, fuzzy
#| msgid ""
#| "Please enter the same user password again to verify you have typed it "
#| "correctly."
msgid "Please enter the name of the VM peer you want to connect to."
msgstr ""
"Si vos plau introduïu la mateixa contrasenya una altra volta per a verificar "
"que l'heu teclejada correctament."
#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:14001
msgid ""
"If you want to connect to multiple peers, separate the names by colons, e."
"g. tcpip:linux1."
msgstr ""
#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:14001
msgid ""
"The standard TCP/IP server name on VM is TCPIP; on VIF it's $TCPIP. Note: "
"IUCV must be enabled in the VM user directory for this driver to work and it "
"must be set up on both ends of the communication."
msgstr ""
#. Type: text
#. Description
#. Main menu item
#. :sl5:
#: ../s390-netdevice.templates:15001
msgid "Configure the network device"
msgstr ""
#. Type: select
#. Description
#. :sl5:
#: ../s390-dasd.templates:1002
msgid "Available devices:"
msgstr ""
#. Type: select
#. Description
#. :sl5:
#: ../s390-dasd.templates:1002
msgid ""
"The following direct access storage devices (DASD) are available. Please "
"select each device you want to use one at a time."
msgstr ""
#. Type: string
#. Description
#. :sl5:
#: ../s390-dasd.templates:2001
msgid "Choose device:"
msgstr ""
#. Type: string
#. Description
#. :sl5:
#: ../s390-dasd.templates:2001
msgid ""
"Please choose a device. You have to specify the complete device number, "
"including leading zeros."
msgstr ""
#. Type: error
#. Description
#. :sl5:
#: ../s390-dasd.templates:3001
#, fuzzy
msgid "Invalid device"
msgstr "Partix els discs"
#. Type: error
#. Description
#. :sl5:
#: ../s390-dasd.templates:3001
msgid "An invalid device number has been chosen."
msgstr ""
#. Type: boolean
#. Description
#. :sl5:
#: ../s390-dasd.templates:4001
msgid "Format the device?"
msgstr ""
#. Type: boolean
#. Description
#. :sl5:
#: ../s390-dasd.templates:4001
msgid ""
"The installer is unable to detect if the device ${device} has already been "
"formatted or not. Devices need to be formatted before you can create "
"partitions."
msgstr ""
#. Type: boolean
#. Description
#. :sl5:
#: ../s390-dasd.templates:4001
msgid ""
"If you are sure the device has already been correctly formatted, you don't "
"need to do so again."
msgstr ""
#. Type: text
#. Description
#. :sl5:
#: ../s390-dasd.templates:5001
msgid "Formatting ${device}..."
msgstr ""
#. Type: text
#. Description
#. Main menu item. Keep translations below 55 columns
#. :sl5:
#: ../s390-dasd.templates:6001
msgid "Configure direct access storage devices (DASD)"
msgstr ""
#. Type: text
#. Description
#. Main menu item
#. :sl5:
#: ../zipl-installer.templates:1001
msgid "Install the ZIPL boot loader on a hard disk"
msgstr ""
Reply to: