Re: [debian-knoppix] DEC 21041 Tulip based NIC's & V3.8/Kernel V2.6.x
On 28 Mar 2005, at 16:57, Klaus Knopper wrote:
> The problem may be entirely different: Have you tried booting with
>
> knoppix nosmp acpi=off noapic nopnpbios (or pnpbios=off)
HARD LOCK UP as always at:
"Network device eth0 detected, DHCP broadcasting for IP."
Must do a total reset via reset switch
ADDING nodhcp
Boots to a working CD, NO network
Doing a netcardconfig from the knoopix menu
HARD LOCK UP as always, Must do a total reset via reset switch
Pretty much anything that accesses the LAN card will HARD LOCK up the
PC.
2 PC's same LAN card
1) Knoppix box - FIC PA-2007 BIOS V1.09CD12 160MB RAM
2) wimpsleze box - ABIT K7R 384MB RAM Last BIOS available
Same results on both. Any attempts to config the LAN card HARD
LOCKUP's
Under 2.4.x kernel, all works great.
> If it may still be a driver problem, please send me the correct line for
> /usr/share/hwdata/pcitable stating
>
> vendor_id product_id correct_module "description"
>
> for inclusion in the hardware detection.
From:
http://pciids.sourceforge.net/pci.ids.gz
#
# List of PCI ID's
#
# Maintained by Martin Mares <mj@ucw.cz> and other volunteers from
the
# Linux PCI ID's Project at http://pciids.sf.net/. New data are always
# welcome (if they are accurate), we're eagerly expecting new entries,
# so if you have anything to contribute, please visit the home page or
# send a diff -u against the most recent pci.ids to pci-ids@ucw.cz.
#
# Daily snapshot on Tue 2005-03-08 10:11:48
#
# Vendors, devices and subsystems. Please keep sorted.
# Syntax:
# vendor vendor_name
# device device_name <-- single tab
# subvendor subdevice subsystem_name <-- two tabs
1011 Digital Equipment Corporation
0014 DECchip 21041 [Tulip Pass 3]
1186 0100 DE-530+
x]$ lspci -v
0000:00:0b.0 Ethernet controller: Digital Equipment
Corporation DECchip 21041 [Tulip Pass 3] (rev 21)
Subsystem: D-Link System Inc DE-530+
Flags: bus master, medium devsel, latency 96,
IRQ 10
I/O ports at 6200 [size=128]
Memory at e0818000 (32-bit, non-prefetchable)
[size=128]
knoppix@1[knoppix]$ dmesg
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
0000:00:0b.0: DC21041 at 0x6200, h/w address
00:40:05:50:47:d8,
and requires IRQ10 (provided by PCI BIOS).
de4x5.c:V0.546 2001/02/22 davies@maniac.ultranet.com
PCI: 0000:00:0a.0 has unsupported PM cap regs version
(1)
ymfpci: YMF724 at 0xe0810000 IRQ 11
ac97_codec: AC97 Audio codec, id: AKM1 (Asahi Kasei
AK4542)
Reply to: