[ 0.000000] Linux version 6.12.48+deb13-amd64 (debian-kernel@lists.debian.org) (x86_64-linux-gnu-gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT_DYNAMIC
Debian 6.12.48-1 (2025-09-20)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.12.48+deb13-amd64 root=/dev/mapper/rootvg-root_lv ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7d9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7da0000-0x00000000c7dadfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000c7dae000-0x00000000c7deffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c7df0000-0x00000000c7efffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000837ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: MICRO-STAR INTERNATIONAL CO.,LTD MS-7577/790FX-GD70(MS-7577), BIOS V1.17 02/18/2011
[ 0.000000] DMI: Memory slots populated: 4/4
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3199.893 MHz processor
[ 0.005694] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.005697] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.014599] AGP: No AGP bridge found
[ 0.014682] last_pfn = 0x838000 max_arch_pfn = 0x400000000
[ 0.014687] MTRR map: 5 entries (3 fixed + 2 variable; max 20), built from 9 variable MTRRs
[ 0.014689] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.015871] e820: update [mem 0xc8000000-0xffffffff] usable ==> reserved
[ 0.015881] last_pfn = 0xc7dae max_arch_pfn = 0x400000000
[ 0.019320] found SMP MP-table at [mem 0x000ff780-0x000ff78f]
[ 0.019342] Using GB pages for direct mapping
[ 0.019764] RAMDISK: [mem 0x27c7d000-0x2fe35fff]
[ 0.020327] ACPI: Early table checksum verification disabled
[ 0.020332] ACPI: RSDP 0x00000000000FAB30 000014 (v00 ACPIAM)
[ 0.020337] ACPI: RSDT 0x00000000C7DA0000 000040 (v01 7577MS A7577100 20110218 MSFT 00000097)
[ 0.020343] ACPI: FACP 0x00000000C7DA0200 000084 (v01 7577MS A7577100 20110218 MSFT 00000097)
[ 0.020347] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20240827/tbfadt-611)
[ 0.020351] ACPI: DSDT 0x00000000C7DA0450 00A4E1 (v01 A7577 A7577100 00000100 INTL 20051117)
[ 0.020355] ACPI: FACS 0x00000000C7DAE000 000040
[ 0.020357] ACPI: APIC 0x00000000C7DA0390 00007C (v01 7577MS A7577100 20110218 MSFT 00000097)
[ 0.020360] ACPI: MCFG 0x00000000C7DA0410 00003C (v01 7577MS OEMMCFG 20110218 MSFT 00000097)
[ 0.020363] ACPI: OEMB 0x00000000C7DAE040 000072 (v01 7577MS A7577100 20110218 MSFT 00000097)
[ 0.020366] ACPI: SRAT 0x00000000C7DAA940 000108 (v03 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.020369] ACPI: HPET 0x00000000C7DAAA50 000038 (v01 7577MS OEMHPET 20110218 MSFT 00000097)
[ 0.020371] ACPI: SSDT 0x00000000C7DAAA90 000DA4 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.020374] ACPI: Reserving FACP table memory at [mem 0xc7da0200-0xc7da0283]
[ 0.020375] ACPI: Reserving DSDT table memory at [mem 0xc7da0450-0xc7daa930]
[ 0.020376] ACPI: Reserving FACS table memory at [mem 0xc7dae000-0xc7dae03f]
[ 0.020377] ACPI: Reserving APIC table memory at [mem 0xc7da0390-0xc7da040b]
[ 0.020378] ACPI: Reserving MCFG table memory at [mem 0xc7da0410-0xc7da044b]
[ 0.020379] ACPI: Reserving OEMB table memory at [mem 0xc7dae040-0xc7dae0b1]
[ 0.020380] ACPI: Reserving SRAT table memory at [mem 0xc7daa940-0xc7daaa47]
[ 0.020381] ACPI: Reserving HPET table memory at [mem 0xc7daaa50-0xc7daaa87]
[ 0.020382] ACPI: Reserving SSDT table memory at [mem 0xc7daaa90-0xc7dab833]
[ 0.020424] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.020426] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xc7ffffff]
[ 0.020427] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x837ffffff]
[ 0.020432] NUMA: Node 0 [mem 0x00001000-0x0009ffff] + [mem 0x00100000-0xc7ffffff] -> [mem 0x00001000-0xc7ffffff]
[ 0.020434] NUMA: Node 0 [mem 0x00001000-0xc7ffffff] + [mem 0x100000000-0x837ffffff] -> [mem 0x00001000-0x837ffffff]
[ 0.020445] NODE_DATA(0) allocated [mem 0x837fd5680-0x837ffffff]
[ 0.020832] Zone ranges:
[ 0.020833] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.020834] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.020836] Normal [mem 0x0000000100000000-0x0000000837ffffff]
[ 0.020837] Device empty
[ 0.020838] Movable zone start for each node
[ 0.020840] Early memory node ranges
[ 0.020840] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.020842] node 0: [mem 0x0000000000100000-0x00000000c7d9ffff]
[ 0.020843] node 0: [mem 0x0000000100000000-0x0000000837ffffff]
[ 0.020847] Initmem setup node 0 [mem 0x0000000000001000-0x0000000837ffffff]
[ 0.020854] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.020900] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.033269] On node 0, zone Normal: 608 pages in unavailable ranges
[ 0.033584] ACPI: PM-Timer IO Port: 0x808
[ 0.033601] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
[ 0.033604] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.033606] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.033610] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.033611] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.033620] CPU topo: Max. logical packages: 1
[ 0.033621] CPU topo: Max. logical dies: 1
[ 0.033621] CPU topo: Max. dies per package: 1
[ 0.033627] CPU topo: Max. threads per core: 1
[ 0.033627] CPU topo: Num. cores per package: 6
[ 0.033628] CPU topo: Num. threads per package: 6
[ 0.033629] CPU topo: Allowing 6 present CPUs plus 0 hotplug CPUs
[ 0.033641] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.033642] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.033644] PM: hibernation: Registered nosave memory: [mem 0xc7da0000-0xffffffff]
[ 0.033647] [mem 0xc7f00000-0xffefffff] available for PCI devices
[ 0.033648] Booting paravirtualized kernel on bare hardware
[ 0.033650] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.039375] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1
[ 0.040543] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288
[ 0.040549] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152
[ 0.040552] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 - -
[ 0.040570] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.12.48+deb13-amd64 root=/dev/mapper/rootvg-root_lv ro
[ 0.040610] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.12.48+deb13-amd64", will be passed to user space.
[ 0.047883] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[ 0.051552] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.051621] Fallback order for Node 0: 0
[ 0.051627] Built 1 zonelists, mobility grouping on. Total pages: 8387902
[ 0.051628] Policy zone: Normal
[ 0.051637] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.051639] AGP: Checking aperture...
[ 0.060539] AGP: No AGP bridge found
[ 0.060541] AGP: Node 0: aperture [bus addr 0x22000000-0x23ffffff] (32MB)
[ 0.060544] Aperture pointing to e820 RAM. Ignoring.
[ 0.060544] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.060545] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.060545] AGP: This costs you 64MB of RAM
[ 0.060548] AGP: Mapping aperture over RAM [mem 0xc0000000-0xc3ffffff] (65536KB)
[ 0.060550] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xc3ffffff]
[ 0.060637] software IO TLB: area num 8.
[ 0.119147] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.119338] ftrace: allocating 45742 entries in 179 pages
[ 0.124573] ftrace: allocated 179 pages with 5 groups
[ 0.125165] Dynamic Preempt: voluntary
[ 0.125323] rcu: Preemptible hierarchical RCU implementation.
[ 0.125324] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=6.
[ 0.125326] Trampoline variant of Tasks RCU enabled.
[ 0.125326] Rude variant of Tasks RCU enabled.
[ 0.125327] Tracing variant of Tasks RCU enabled.
[ 0.125327] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.125328] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[ 0.125341] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=6.
[ 0.125347] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=6.
[ 0.125349] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=6.
[ 0.131620] NR_IRQS: 524544, nr_irqs: 472, preallocated irqs: 16
[ 0.131844] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.131943] spurious 8259A interrupt: IRQ7.
[ 0.135733] Console: colour VGA+ 80x25
[ 0.135737] printk: legacy console [tty0] enabled
[ 0.141098] ACPI: Core revision 20240827
[ 0.141298] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.141361] APIC: Switch to symmetric I/O mode setup
[ 0.141757] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.161362] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e1fe4ee242, max_idle_ns: 440795210636 ns
[ 0.161415] Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.78 BogoMIPS (lpj=12799572)
[ 0.161493] LVT offset 0 assigned for vector 0xf9
[ 0.161537] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.161579] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[ 0.161625] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.161672] Spectre V2 : Mitigation: Retpolines
[ 0.161713] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[ 0.161762] x86/fpu: x87 FPU will use FXSAVE
[ 0.176597] Freeing SMP alternatives memory: 40K
[ 0.176650] pid_max: default: 32768 minimum: 301
[ 0.177337] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,ipe,ima,evm
[ 0.177657] landlock: Up and running.
[ 0.177698] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.177822] AppArmor: AppArmor initialized
[ 0.177878] TOMOYO Linux initialized
[ 0.178079] LSM support for eBPF active
[ 0.178482] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.178645] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.181416] process: System has AMD C1E erratum E400. Workaround enabled.
[ 0.290836] process: Switch to broadcast mode on CPU0
[ 0.290885] smpboot: CPU0: AMD Phenom(tm) II X6 1090T Processor (family: 0x10, model: 0xa, stepping: 0x0)
[ 0.291281] Performance Events: AMD PMU driver.
[ 0.291328] ... version: 0
[ 0.291368] ... bit width: 48
[ 0.291408] ... generic registers: 4
[ 0.291448] ... value mask: 0000ffffffffffff
[ 0.291489] ... max period: 00007fffffffffff
[ 0.291529] ... fixed-purpose events: 0
[ 0.291570] ... event mask: 000000000000000f
[ 0.291697] signal: max sigframe size: 1440
[ 0.291790] rcu: Hierarchical SRCU implementation.
[ 0.291832] rcu: Max phase no-delay instances is 1000.
[ 0.293099] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.293410] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.293410] smp: Bringing up secondary CPUs ...
[ 0.293410] smpboot: x86: Booting SMP configuration:
[ 0.293410] .... node #0, CPUs: #1 #2 #3 #4 #5
[ 0.013540] process: Switch to broadcast mode on CPU1
[ 0.013540] process: Switch to broadcast mode on CPU2
[ 0.013540] process: Switch to broadcast mode on CPU3
[ 0.013540] process: Switch to broadcast mode on CPU4
[ 0.013540] process: Switch to broadcast mode on CPU5
[ 0.303412] smp: Brought up 1 node, 6 CPUs
[ 0.303412] smpboot: Total of 6 processors activated (38398.71 BogoMIPS)
[ 0.387794] node 0 deferred pages initialised in 80ms
[ 0.387794] Memory: 32659008K/33551608K available (16384K kernel code, 2497K rwdata, 11800K rodata, 4148K init, 4936K bss, 885716K reserved, 0K cma-reserved)
[ 0.390075] devtmpfs: initialized
[ 0.390075] x86/mm: Memory block size: 128MB
[ 0.393577] ACPI: PM: Registering ACPI NVS region [mem 0xc7dae000-0xc7deffff] (270336 bytes)
[ 0.393577] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.393638] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.394118] pinctrl core: initialized pinctrl subsystem
[ 0.395520] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.396677] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[ 0.398031] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.399021] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.399093] audit: initializing netlink subsys (disabled)
[ 0.399169] audit: type=2000 audit(1758636074.256:1): state=initialized audit_enabled=0 res=1
[ 0.399169] thermal_sys: Registered thermal governor 'fair_share'
[ 0.399169] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.399169] thermal_sys: Registered thermal governor 'step_wise'
[ 0.399169] thermal_sys: Registered thermal governor 'user_space'
[ 0.399169] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.399169] cpuidle: using governor ladder
[ 0.399169] cpuidle: using governor menu
[ 0.399169] node 0 link 0: io port [1000, ffffff]
[ 0.399169] TOM: 00000000c8000000 aka 3200M
[ 0.399169] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.399169] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.399169] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.399169] node 0 link 0: mmio [a0000, bffff]
[ 0.399169] node 0 link 0: mmio [c8000000, dfffffff]
[ 0.399169] TOM2: 0000000838000000 aka 33664M
[ 0.399169] bus: [bus 00-07] on node 0 link 0
[ 0.399169] bus: 00 [io 0x0000-0xffff]
[ 0.399169] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.399169] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.399169] bus: 00 [mem 0xc8000000-0xdfffffff]
[ 0.399169] bus: 00 [mem 0x838000000-0xfcffffffff]
[ 0.399169] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.399169] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[ 0.399169] PCI: not using ECAM ([mem 0xe0000000-0xefffffff] not reserved)
[ 0.399169] PCI: Using configuration type 1 for base access
[ 0.399169] PCI: Using configuration type 1 for extended access
[ 0.399169] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.399169] mtrr: probably your BIOS does not setup all CPUs.
[ 0.399169] mtrr: corrected configuration.
[ 0.399169] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.403176] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.403176] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.403176] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.403176] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.405974] ACPI: Added _OSI(Module Device)
[ 0.405974] ACPI: Added _OSI(Processor Device)
[ 0.405974] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.410277] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.410656] ACPI: Interpreter enabled
[ 0.410656] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.410656] ACPI: Using IOAPIC for interrupt routing
[ 0.410656] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[ 0.410656] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource
[ 0.410656] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.410656] PCI: Using E820 reservations for host bridge windows
[ 0.410716] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.417534] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.417589] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.417706] acpi PNP0A03:00: ignoring host bridge window [mem 0x000d0000-0x000dffff window] (conflicts with Adapter ROM [mem 0x000ce800-0x000d03ff])
[ 0.417970] PCI host bridge to bus 0000:00
[ 0.418013] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.418056] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.418098] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.418145] pci_bus 0000:00: root bus resource [mem 0xc7f00000-0xdfffffff window]
[ 0.418191] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[ 0.418238] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.418294] pci 0000:00:00.0: [1002:5956] type 00 class 0x060000 conventional PCI endpoint
[ 0.418351] pci 0000:00:00.0: [Firmware Bug]: BAR 3: invalid; can't size
[ 0.418489] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400 PCIe Root Port
[ 0.418547] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.418591] pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
[ 0.418634] pci 0000:00:02.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.418679] pci 0000:00:02.0: bridge window [mem 0xcfe00000-0xdfffffff 64bit pref]
[ 0.418729] pci 0000:00:02.0: enabling Extended Tags
[ 0.418795] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.418917] pci 0000:00:05.0: [1002:597b] type 01 class 0x060400 PCIe Root Port
[ 0.418974] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.419017] pci 0000:00:05.0: bridge window [io 0xb000-0xbfff]
[ 0.419060] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.419105] pci 0000:00:05.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.419155] pci 0000:00:05.0: enabling Extended Tags
[ 0.419222] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.419333] pci 0000:00:06.0: [1002:597c] type 01 class 0x060400 PCIe Root Port
[ 0.419390] pci 0000:00:06.0: PCI bridge to [bus 03]
[ 0.419434] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
[ 0.419476] pci 0000:00:06.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.419521] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.419571] pci 0000:00:06.0: enabling Extended Tags
[ 0.419635] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.419745] pci 0000:00:07.0: [1002:597d] type 01 class 0x060400 PCIe Root Port
[ 0.419802] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.419845] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
[ 0.419887] pci 0000:00:07.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.419936] pci 0000:00:07.0: enabling Extended Tags
[ 0.420001] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.420116] pci 0000:00:0b.0: [1002:5980] type 01 class 0x060400 PCIe Root Port
[ 0.420173] pci 0000:00:0b.0: PCI bridge to [bus 05]
[ 0.420217] pci 0000:00:0b.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.420267] pci 0000:00:0b.0: enabling Extended Tags
[ 0.420331] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
[ 0.420438] pci 0000:00:0c.0: [1002:5981] type 01 class 0x060400 PCIe Root Port
[ 0.420495] pci 0000:00:0c.0: PCI bridge to [bus 06]
[ 0.420538] pci 0000:00:0c.0: bridge window [io 0xe000-0xefff]
[ 0.420588] pci 0000:00:0c.0: enabling Extended Tags
[ 0.420653] pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold
[ 0.420774] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 conventional PCI endpoint
[ 0.420836] pci 0000:00:11.0: BAR 0 [io 0x9000-0x9007]
[ 0.420885] pci 0000:00:11.0: BAR 1 [io 0x8000-0x8003]
[ 0.420934] pci 0000:00:11.0: BAR 2 [io 0x7000-0x7007]
[ 0.420983] pci 0000:00:11.0: BAR 3 [io 0x6000-0x6003]
[ 0.421031] pci 0000:00:11.0: BAR 4 [io 0x5000-0x500f]
[ 0.421081] pci 0000:00:11.0: BAR 5 [mem 0xfe6ffc00-0xfe6fffff]
[ 0.421220] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.421282] pci 0000:00:12.0: BAR 0 [mem 0xfe6fe000-0xfe6fefff]
[ 0.421491] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.421554] pci 0000:00:12.1: BAR 0 [mem 0xfe6fd000-0xfe6fdfff]
[ 0.421728] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint
[ 0.421792] pci 0000:00:12.2: BAR 0 [mem 0xfe6ff800-0xfe6ff8ff]
[ 0.421915] pci 0000:00:12.2: supports D1 D2
[ 0.421964] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.422083] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.422144] pci 0000:00:13.0: BAR 0 [mem 0xfe6fc000-0xfe6fcfff]
[ 0.422303] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.422365] pci 0000:00:13.1: BAR 0 [mem 0xfe6f7000-0xfe6f7fff]
[ 0.422526] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint
[ 0.422587] pci 0000:00:13.2: BAR 0 [mem 0xfe6ff400-0xfe6ff4ff]
[ 0.422709] pci 0000:00:13.2: supports D1 D2
[ 0.422750] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.422864] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.423052] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint
[ 0.423114] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007]
[ 0.423163] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003]
[ 0.423211] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007]
[ 0.423260] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003]
[ 0.423309] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f]
[ 0.423369] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk
[ 0.423411] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk
[ 0.423452] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk
[ 0.423494] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk
[ 0.423619] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 conventional PCI endpoint
[ 0.424857] pci 0000:00:14.2: BAR 0 [mem 0xfe6f0000-0xfe6f3fff 64bit]
[ 0.424965] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.425070] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint
[ 0.425271] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge
[ 0.425348] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode)
[ 0.425504] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.425567] pci 0000:00:14.5: BAR 0 [mem 0xfe6f6000-0xfe6f6fff]
[ 0.425725] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 conventional PCI endpoint
[ 0.425817] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 conventional PCI endpoint
[ 0.425907] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 conventional PCI endpoint
[ 0.426001] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 conventional PCI endpoint
[ 0.426087] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 conventional PCI endpoint
[ 0.426216] pci 0000:01:00.0: [1002:699f] type 00 class 0x030000 PCIe Legacy Endpoint
[ 0.426276] pci 0000:01:00.0: BAR 0 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.426327] pci 0000:01:00.0: BAR 2 [mem 0xcfe00000-0xcfffffff 64bit pref]
[ 0.426375] pci 0000:01:00.0: BAR 4 [io 0xa000-0xa0ff]
[ 0.426422] pci 0000:01:00.0: BAR 5 [mem 0xfe7c0000-0xfe7fffff]
[ 0.426469] pci 0000:01:00.0: ROM [mem 0xfe7a0000-0xfe7bffff pref]
[ 0.426515] pci 0000:01:00.0: enabling Extended Tags
[ 0.426581] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.426682] pci 0000:01:00.0: supports D1 D2
[ 0.426723] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.426825] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x8 link at 0000:00:02.0 (capable of 63.008 Gb/s with 8.0 GT/s PCIe x8 link)
[ 0.426958] pci 0000:01:00.1: [1002:aae0] type 00 class 0x040300 PCIe Legacy Endpoint
[ 0.427019] pci 0000:01:00.1: BAR 0 [mem 0xfe79c000-0xfe79ffff 64bit]
[ 0.427094] pci 0000:01:00.1: enabling Extended Tags
[ 0.427184] pci 0000:01:00.1: supports D1 D2
[ 0.427313] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.427402] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
[ 0.427462] pci 0000:02:00.0: BAR 0 [io 0xb800-0xb8ff]
[ 0.427523] pci 0000:02:00.0: BAR 2 [mem 0xfdeff000-0xfdefffff 64bit pref]
[ 0.427577] pci 0000:02:00.0: BAR 4 [mem 0xfdef8000-0xfdefbfff 64bit pref]
[ 0.427626] pci 0000:02:00.0: ROM [mem 0xfe8e0000-0xfe8fffff pref]
[ 0.427735] pci 0000:02:00.0: supports D1 D2
[ 0.427776] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.427923] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.428011] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
[ 0.428071] pci 0000:03:00.0: BAR 0 [io 0xc800-0xc8ff]
[ 0.428131] pci 0000:03:00.0: BAR 2 [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.428185] pci 0000:03:00.0: BAR 4 [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 0.428234] pci 0000:03:00.0: ROM [mem 0xfe9e0000-0xfe9fffff pref]
[ 0.428341] pci 0000:03:00.0: supports D1 D2
[ 0.428382] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.428527] pci 0000:00:06.0: PCI bridge to [bus 03]
[ 0.428627] pci 0000:04:00.0: [1106:3403] type 00 class 0x0c0010 PCIe Endpoint
[ 0.428708] pci 0000:04:00.0: BAR 0 [mem 0xfeaff800-0xfeafffff 64bit]
[ 0.428764] pci 0000:04:00.0: BAR 2 [io 0xd800-0xd8ff]
[ 0.428953] pci 0000:04:00.0: supports D2
[ 0.428994] pci 0000:04:00.0: PME# supported from D2 D3hot D3cold
[ 0.433491] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.433706] pci 0000:05:00.0: [168c:0024] type 00 class 0x028000 PCIe Legacy Endpoint
[ 0.433776] pci 0000:05:00.0: BAR 0 [mem 0xfebf0000-0xfebfffff 64bit]
[ 0.433926] pci 0000:05:00.0: supports D1
[ 0.433968] pci 0000:05:00.0: PME# supported from D0 D1 D3hot
[ 0.434107] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.434164] pci 0000:00:0b.0: PCI bridge to [bus 05]
[ 0.434264] pci 0000:06:00.0: [1415:c110] type 00 class 0x070102 PCIe Legacy Endpoint
[ 0.434337] pci 0000:06:00.0: BAR 0 [io 0xe800-0xe807]
[ 0.434392] pci 0000:06:00.0: BAR 1 [io 0xe400-0xe403]
[ 0.434596] pci 0000:06:00.0: supports D1 D2
[ 0.434637] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.434816] pci 0000:00:0c.0: PCI bridge to [bus 06]
[ 0.434872] pci_bus 0000:07: extended config space not accessible
[ 0.434971] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode)
[ 0.435020] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.435067] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.435113] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.435160] pci 0000:00:14.4: bridge window [mem 0xc7f00000-0xdfffffff window] (subtractive decode)
[ 0.435206] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
[ 0.435738] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.435808] ACPI: PCI: Interrupt link LNKB configured for IRQ 11
[ 0.435878] ACPI: PCI: Interrupt link LNKC configured for IRQ 10
[ 0.435946] ACPI: PCI: Interrupt link LNKD configured for IRQ 7
[ 0.436014] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.436056] ACPI: PCI: Interrupt link LNKE disabled
[ 0.436123] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.436165] ACPI: PCI: Interrupt link LNKF disabled
[ 0.436232] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ 0.436301] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.436342] ACPI: PCI: Interrupt link LNKH disabled
[ 0.436549] iommu: Default domain type: Translated
[ 0.436549] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.436549] pps_core: LinuxPPS API ver. 1 registered
[ 0.436549] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.436549] PTP clock support registered
[ 0.436549] EDAC MC: Ver: 3.0.0
[ 0.437542] NetLabel: Initializing
[ 0.437584] NetLabel: domain hash size = 128
[ 0.437627] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.437684] NetLabel: unlabeled traffic allowed by default
[ 0.437726] PCI: Using ACPI for IRQ routing
[ 0.446669] PCI: pci_cache_line_size set to 64 bytes
[ 0.446737] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.446739] e820: reserve RAM buffer [mem 0xc7da0000-0xc7ffffff]
[ 0.446766] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.446766] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.446766] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.446766] vgaarb: loaded
[ 0.446766] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.446766] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.447835] clocksource: Switched to clocksource tsc-early
[ 0.447883] VFS: Disk quotas dquot_6.6.0
[ 0.447883] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.447883] AppArmor: AppArmor Filesystem Enabled
[ 0.447883] pnp: PnP ACPI init
[ 0.447883] pnp 00:01: [dma 0 disabled]
[ 0.447883] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.447883] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.447883] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.447903] system 00:03: [io 0x040b] has been reserved
[ 0.447944] system 00:03: [io 0x04d6] has been reserved
[ 0.447986] system 00:03: [io 0x0c00-0x0c01] has been reserved
[ 0.448028] system 00:03: [io 0x0c14] has been reserved
[ 0.448070] system 00:03: [io 0x0c50-0x0c51] has been reserved
[ 0.448111] system 00:03: [io 0x0c52] has been reserved
[ 0.448153] system 00:03: [io 0x0c6c] has been reserved
[ 0.448194] system 00:03: [io 0x0c6f] has been reserved
[ 0.448235] system 00:03: [io 0x0cd0-0x0cd1] has been reserved
[ 0.448276] system 00:03: [io 0x0cd2-0x0cd3] has been reserved
[ 0.448317] system 00:03: [io 0x0cd4-0x0cd5] has been reserved
[ 0.448359] system 00:03: [io 0x0cd6-0x0cd7] has been reserved
[ 0.448400] system 00:03: [io 0x0cd8-0x0cdf] has been reserved
[ 0.448442] system 00:03: [io 0x0800-0x089f] has been reserved
[ 0.448483] system 00:03: [io 0x0b00-0x0b0f] has been reserved
[ 0.448525] system 00:03: [io 0x0b20-0x0b3f] has been reserved
[ 0.448566] system 00:03: [io 0x0900-0x090f] has been reserved
[ 0.448607] system 00:03: [io 0x0910-0x091f] has been reserved
[ 0.448649] system 00:03: [io 0xfe00-0xfefe] has been reserved
[ 0.448691] system 00:03: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.448733] system 00:03: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.448904] system 00:05: [io 0x0600-0x06df] has been reserved
[ 0.448947] system 00:05: [io 0x06e0-0x06ef] has been reserved
[ 0.449040] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.449165] pnp 00:07: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 0.449231] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.449274] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.449316] system 00:07: [mem 0x00100000-0xc7efffff] could not be reserved
[ 0.449358] system 00:07: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.449466] pnp: PnP ACPI: found 8 devices
[ 0.455937] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.456170] NET: Registered PF_INET protocol family
[ 0.456633] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.471602] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.471737] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.472165] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.472903] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.473245] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.473708] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[ 0.474052] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.475554] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.475795] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.475848] NET: Registered PF_XDP protocol family
[ 0.475915] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.475960] pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
[ 0.476004] pci 0000:00:02.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.476048] pci 0000:00:02.0: bridge window [mem 0xcfe00000-0xdfffffff 64bit pref]
[ 0.476097] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.476139] pci 0000:00:05.0: bridge window [io 0xb000-0xbfff]
[ 0.476182] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.476225] pci 0000:00:05.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.476273] pci 0000:00:06.0: PCI bridge to [bus 03]
[ 0.476314] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
[ 0.476357] pci 0000:00:06.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.476400] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.476448] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.476489] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
[ 0.476532] pci 0000:00:07.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.476576] pci 0000:00:0b.0: PCI bridge to [bus 05]
[ 0.476619] pci 0000:00:0b.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.476663] pci 0000:00:0c.0: PCI bridge to [bus 06]
[ 0.476705] pci 0000:00:0c.0: bridge window [io 0xe000-0xefff]
[ 0.476751] pci 0000:00:14.4: PCI bridge to [bus 07]
[ 0.476803] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.476845] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.476887] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.476930] pci_bus 0000:00: resource 7 [mem 0xc7f00000-0xdfffffff window]
[ 0.476972] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window]
[ 0.477015] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.477056] pci_bus 0000:01: resource 1 [mem 0xfe700000-0xfe7fffff]
[ 0.477098] pci_bus 0000:01: resource 2 [mem 0xcfe00000-0xdfffffff 64bit pref]
[ 0.477144] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
[ 0.477185] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.477227] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.477274] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.477316] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.477357] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.477404] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.477445] pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.477487] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.477529] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
[ 0.477599] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7 window]
[ 0.477657] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff window]
[ 0.477699] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.477742] pci_bus 0000:07: resource 7 [mem 0xc7f00000-0xdfffffff window]
[ 0.477785] pci_bus 0000:07: resource 8 [mem 0xf0000000-0xfebfffff window]
[ 0.545955] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x750 took 66464 usecs
[ 0.569918] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x750 took 23340 usecs
[ 0.593917] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x750 took 23226 usecs
[ 0.617946] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x750 took 23405 usecs
[ 0.641951] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x750 took 23220 usecs
[ 0.642059] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.642123] PCI: CLS 64 bytes, default 64
[ 0.642323] Trying to unpack rootfs image as initramfs...
[ 0.642668] PCI-DMA: Disabling AGP.
[ 0.642848] PCI-DMA: aperture base @ c0000000 size 65536 KB
[ 0.642891] PCI-DMA: using GART IOMMU.
[ 0.642935] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.643629] software IO TLB: tearing down default memory pool
[ 0.645383] LVT offset 1 assigned for vector 0x400
[ 0.645443] LVT offset 1 assigned
[ 0.649743] perf: AMD IBS detected (0x0000001f)
[ 0.650738] Initialise system trusted keyrings
[ 0.650799] Key type blacklist registered
[ 0.650982] workingset: timestamp_bits=36 max_order=23 bucket_order=0
[ 0.651034] zbud: loaded
[ 0.651500] fuse: init (API version 7.41)
[ 0.651867] integrity: Platform Keyring initialized
[ 0.651915] integrity: Machine keyring initialized
[ 0.672582] Key type asymmetric registered
[ 0.672636] Asymmetric key parser 'x509' registered
[ 1.230993] Freeing initrd memory: 132836K
[ 1.237974] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.238275] io scheduler mq-deadline registered
[ 1.240589] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.241560] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.241735] ACPI: processor limited to max C-state 1
[ 1.242748] Could not retrieve perf counters (-19)
[ 1.243197] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.243430] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.244332] Linux agpgart interface v0.103
[ 1.245410] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.245455] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.245650] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.245822] mousedev: PS/2 mouse device common for all mice
[ 1.245901] rtc_cmos 00:00: RTC can wake from S4
[ 1.246173] rtc_cmos 00:00: registered as rtc0
[ 1.246242] rtc_cmos 00:00: setting system clock to 2025-09-23T14:01:15 UTC (1758636075)
[ 1.246322] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.246376] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[ 1.246918] NET: Registered PF_INET6 protocol family
[ 1.252905] Segment Routing with IPv6
[ 1.252968] In-situ OAM (IOAM) with IPv6
[ 1.253034] mip6: Mobile IPv6
[ 1.253078] NET: Registered PF_PACKET protocol family
[ 1.253202] mpls_gso: MPLS GSO support
[ 1.253853] microcode: Current revision: 0x010000dc
[ 1.253897] microcode: Updated early from: 0x010000bf
[ 1.254227] IPI shorthand broadcast: enabled
[ 1.256081] sched_clock: Marking stable (1244672937, 9540638)->(1267505700, -13292125)
[ 1.256379] registered taskstats version 1
[ 1.256564] Loading compiled-in X.509 certificates
[ 1.268295] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.280802] Loaded X.509 cert 'Build time autogenerated kernel key: fb343046eae20e819e95f603536d646f69925118'
[ 1.282964] Demotion targets for Node 0: null
[ 1.283155] Key type .fscrypt registered
[ 1.283196] Key type fscrypt-provisioning registered
[ 1.304124] Key type encrypted registered
[ 1.304177] AppArmor: AppArmor sha256 policy hashing enabled
[ 1.304248] ima: No TPM chip found, activating TPM-bypass!
[ 1.304292] ima: Allocated hash algorithm: sha256
[ 1.304343] ima: No architecture policies found
[ 1.304416] evm: Initialising EVM extended attributes:
[ 1.304457] evm: security.selinux
[ 1.304497] evm: security.SMACK64 (disabled)
[ 1.304537] evm: security.SMACK64EXEC (disabled)
[ 1.304578] evm: security.SMACK64TRANSMUTE (disabled)
[ 1.304618] evm: security.SMACK64MMAP (disabled)
[ 1.304659] evm: security.apparmor
[ 1.304698] evm: security.ima
[ 1.304738] evm: security.capability
[ 1.304777] evm: HMAC attrs: 0x1
[ 1.306513] RAS: Correctable Errors collector initialized.
[ 1.313426] clk: Disabling unused clocks
[ 1.313473] PM: genpd: Disabling unused power domains
[ 1.315425] Freeing unused decrypted memory: 2028K
[ 1.316621] Freeing unused kernel image (initmem) memory: 4148K
[ 1.316706] Write protecting the kernel read-only data: 28672k
[ 1.317100] Freeing unused kernel image (rodata/data gap) memory: 488K
[ 1.353242] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.353297] Run /init as init process
[ 1.353338] with arguments:
[ 1.353340] /init
[ 1.353341] with environment:
[ 1.353342] HOME=/
[ 1.353343] TERM=linux
[ 1.353343] BOOT_IMAGE=/boot/vmlinuz-6.12.48+deb13-amd64
[ 1.476806] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.489629] ACPI: button: Power Button [PWRB]
[ 1.489751] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.489845] ACPI: button: Power Button [PWRF]
[ 1.521515] SCSI subsystem initialized
[ 1.522930] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20240827/utaddress-204)
[ 1.522995] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 1.530813] ACPI: bus type USB registered
[ 1.530905] usbcore: registered new interface driver usbfs
[ 1.530956] usbcore: registered new interface driver hub
[ 1.531023] usbcore: registered new device driver usb
[ 1.548467] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.551677] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 1.551815] sp5100-tco sp5100-tco: Failed to reserve MMIO or alternate MMIO region
[ 1.551864] sp5100-tco sp5100-tco: probe with driver sp5100-tco failed with error -16
[ 1.553473] r8169 0000:02:00.0 eth0: RTL8168d/8111d, 00:24:21:2d:06:40, XID 281, IRQ 30
[ 1.553528] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 1.554942] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.565553] libata version 3.00 loaded.
[ 1.565572] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.565631] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.565693] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.565751] ehci-pci 0000:00:12.2: debug port 1
[ 1.565845] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe6ff800
[ 1.567448] r8169 0000:03:00.0 eth1: RTL8168d/8111d, 00:24:21:2d:06:3f, XID 281, IRQ 31
[ 1.567498] r8169 0000:03:00.0 eth1: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 1.581626] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.581733] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[ 1.581781] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.581829] usb usb1: Product: EHCI Host Controller
[ 1.581870] usb usb1: Manufacturer: Linux 6.12.48+deb13-amd64 ehci_hcd
[ 1.581912] usb usb1: SerialNumber: 0000:00:12.2
[ 1.582210] hub 1-0:1.0: USB hub found
[ 1.582259] hub 1-0:1.0: 6 ports detected
[ 1.582503] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.582550] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.582599] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.582654] ehci-pci 0000:00:13.2: debug port 1
[ 1.582730] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe6ff400
[ 1.597605] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.597697] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[ 1.597745] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.597792] usb usb2: Product: EHCI Host Controller
[ 1.597833] usb usb2: Manufacturer: Linux 6.12.48+deb13-amd64 ehci_hcd
[ 1.597875] usb usb2: SerialNumber: 0000:00:13.2
[ 1.598127] hub 2-0:1.0: USB hub found
[ 1.598174] hub 2-0:1.0: 6 ports detected
[ 1.601990] ACPI: bus type drm_connector registered
[ 1.608821] scsi host0: pata_atiixp
[ 1.609113] scsi host1: pata_atiixp
[ 1.609204] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 lpm-pol 0
[ 1.609252] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 lpm-pol 0
[ 1.609406] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.609463] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.609634] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe6fe000
[ 1.613642] tsc: Refined TSC clocksource calibration: 3200.131 MHz
[ 1.613733] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e20c5d9491, max_idle_ns: 440795227658 ns
[ 1.615263] firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.615317] clocksource: Switched to clocksource tsc
[ 1.669717] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
[ 1.669772] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.669823] usb usb3: Product: OHCI PCI host controller
[ 1.669865] usb usb3: Manufacturer: Linux 6.12.48+deb13-amd64 ohci_hcd
[ 1.669907] usb usb3: SerialNumber: 0000:00:12.0
[ 1.670172] hub 3-0:1.0: USB hub found
[ 1.670222] hub 3-0:1.0: 3 ports detected
[ 1.670675] ohci-pci 0000:00:12.1: OHCI PCI host controller
[ 1.670722] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.670800] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe6fd000
[ 1.729686] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
[ 1.729737] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.729783] usb usb4: Product: OHCI PCI host controller
[ 1.729824] usb usb4: Manufacturer: Linux 6.12.48+deb13-amd64 ohci_hcd
[ 1.729866] usb usb4: SerialNumber: 0000:00:12.1
[ 1.730039] hub 4-0:1.0: USB hub found
[ 1.730088] hub 4-0:1.0: 3 ports detected
[ 1.730465] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.730516] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.730592] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe6fc000
[ 1.782337] ahci 0000:00:11.0: version 3.0
[ 1.782602] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode
[ 1.782666] ahci 0000:00:11.0: 6/6 ports implemented (port mask 0x3f)
[ 1.782710] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.783794] scsi host2: ahci
[ 1.784043] scsi host3: ahci
[ 1.784244] scsi host4: ahci
[ 1.784423] scsi host5: ahci
[ 1.784596] scsi host6: ahci
[ 1.784794] scsi host7: ahci
[ 1.784891] ata3: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd00 irq 22 lpm-pol 3
[ 1.784942] ata4: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd80 irq 22 lpm-pol 3
[ 1.784990] ata5: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe00 irq 22 lpm-pol 3
[ 1.785037] ata6: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe80 irq 22 lpm-pol 3
[ 1.785085] ata7: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6fff00 irq 22 lpm-pol 3
[ 1.785133] ata8: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6fff80 irq 22 lpm-pol 3
[ 1.793692] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
[ 1.793744] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.793791] usb usb5: Product: OHCI PCI host controller
[ 1.793833] usb usb5: Manufacturer: Linux 6.12.48+deb13-amd64 ohci_hcd
[ 1.793876] usb usb5: SerialNumber: 0000:00:13.0
[ 1.794161] hub 5-0:1.0: USB hub found
[ 1.794211] hub 5-0:1.0: 3 ports detected
[ 1.794601] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 1.794651] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.794720] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe6f7000
[ 1.853732] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
[ 1.853782] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.853829] usb usb6: Product: OHCI PCI host controller
[ 1.853871] usb usb6: Manufacturer: Linux 6.12.48+deb13-amd64 ohci_hcd
[ 1.853912] usb usb6: SerialNumber: 0000:00:13.1
[ 1.854090] hub 6-0:1.0: USB hub found
[ 1.854139] hub 6-0:1.0: 3 ports detected
[ 1.854532] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.854579] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.854646] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe6f6000
[ 1.913709] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
[ 1.913762] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.913808] usb usb7: Product: OHCI PCI host controller
[ 1.913849] usb usb7: Manufacturer: Linux 6.12.48+deb13-amd64 ohci_hcd
[ 1.913891] usb usb7: SerialNumber: 0000:00:14.5
[ 1.914067] hub 7-0:1.0: USB hub found
[ 1.914116] hub 7-0:1.0: 2 ports detected
[ 2.053651] usb 5-2: new full-speed USB device number 2 using ohci-pci
[ 2.097630] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.101403] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.109660] usb 3-3: new full-speed USB device number 2 using ohci-pci
[ 2.126023] firewire_core 0000:04:00.0: created device fw0: GUID 0010dc00019160d8, S400
[ 2.239730] usb 5-2: New USB device found, idVendor=04e6, idProduct=5116, bcdDevice= 2.04
[ 2.239814] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.239878] usb 5-2: Product: SCR3310 v2.0 USB SC Reader
[ 2.239940] usb 5-2: Manufacturer: SCM Microsystems Inc.
[ 2.253663] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.253767] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.254173] ata7.00: ATA-9: M4-CT064M4SSD1, 070H, max UDMA/100
[ 2.254451] ata7.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.254893] ata7.00: configured for UDMA/100
[ 2.256201] ata4.00: ATAPI: ATAPI iHAS124 D, 8L0A, max UDMA/100
[ 2.257150] ata4.00: configured for UDMA/100
[ 2.257660] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.257762] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.260268] ata3.00: ATA-9: WDC WD4002FYYZ-01B7CB1, 01.01M03, max UDMA/133
[ 2.264457] ata3.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 2.266746] ata3.00: Features: NCQ-prio
[ 2.273436] ata6.00: ATA-9: WDC WD4002FYYZ-01B7CB1, 01.01M03, max UDMA/133
[ 2.273887] ata3.00: configured for UDMA/133
[ 2.276357] scsi 2:0:0:0: Direct-Access ATA WDC WD4002FYYZ-0 1M03 PQ: 0 ANSI: 5
[ 2.280348] scsi 3:0:0:0: CD-ROM ATAPI iHAS124 D 8L0A PQ: 0 ANSI: 5
[ 2.288736] ata6.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 2.290993] ata6.00: Features: NCQ-prio
[ 2.298038] ata6.00: configured for UDMA/133
[ 2.298743] usb 3-3: New USB device found, idVendor=056a, idProduct=0017, bcdDevice= 1.16
[ 2.298824] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.298886] usb 3-3: Product: CTE-450
[ 2.298942] usb 3-3: Manufacturer: Wacom Co.,Ltd.
[ 2.325019] scsi 5:0:0:0: Direct-Access ATA WDC WD4002FYYZ-0 1M03 PQ: 0 ANSI: 5
[ 2.326699] scsi 6:0:0:0: Direct-Access ATA M4-CT064M4SSD1 070H PQ: 0 ANSI: 5
[ 2.345507] sd 6:0:0:0: [sdc] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 2.345582] sd 6:0:0:0: [sdc] Write Protect is off
[ 2.345599] sd 2:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 2.345625] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.345687] sd 2:0:0:0: [sda] Write Protect is off
[ 2.345695] sd 5:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 2.345731] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.345789] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.345792] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.345851] sd 5:0:0:0: [sdb] Write Protect is off
[ 2.345908] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 2.345926] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.345989] sd 6:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
[ 2.346151] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.346414] sd 5:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
[ 2.355881] hid: raw HID events driver (C) Jiri Kosina
[ 2.379019] sdc: sdc1 sdc2 sdc3 < sdc5 >
[ 2.379278] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 2.421095] sda: sda1
[ 2.421237] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.425226] sdb: sdb1
[ 2.425432] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 2.442942] usbcore: registered new interface driver usbhid
[ 2.442993] usbhid: USB HID core driver
[ 2.451465] input: Wacom Co.,Ltd. CTE-450 Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:056A:0017.0001/input/input3
[ 2.451671] hid-generic 0003:056A:0017.0001: input,hidraw0: USB HID v1.00 Mouse [Wacom Co.,Ltd. CTE-450] on usb-0000:00:12.0-3/input0
[ 2.478839] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.478926] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.482230] wacom 0003:056A:0017.0001: hidraw0: USB HID v1.00 Mouse [Wacom Co.,Ltd. CTE-450] on usb-0000:00:12.0-3/input0
[ 2.482318] input: Wacom BambooFun 4x5 Pen as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:056A:0017.0001/input/input5
[ 2.482455] input: Wacom BambooFun 4x5 Pad as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:056A:0017.0001/input/input7
[ 2.536827] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.699564] md/raid1:md0: active with 2 out of 2 mirrors
[ 2.709532] md0: detected capacity change from 0 to 7813772943
[ 2.757602] usb 2-5: new high-speed USB device number 3 using ehci-pci
[ 2.917603] usb 2-5: New USB device found, idVendor=05e3, idProduct=0716, bcdDevice=97.32
[ 2.917661] usb 2-5: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 2.917709] usb 2-5: Product: USB Storage
[ 2.917751] usb 2-5: SerialNumber: 000000009732
[ 2.934297] usb-storage 2-5:1.0: USB Mass Storage device detected
[ 2.934558] scsi host8: usb-storage 2-5:1.0
[ 2.934678] usbcore: registered new interface driver usb-storage
[ 2.942704] usbcore: registered new interface driver uas
[ 2.969665] usb 4-1: new low-speed USB device number 2 using ohci-pci
[ 3.081623] random: crng init done
[ 3.173520] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 3.173653] device-mapper: uevent: version 1.0.3
[ 3.173832] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[ 3.284586] usb 4-1: New USB device found, idVendor=046d, idProduct=c501, bcdDevice= 9.10
[ 3.284644] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.284687] usb 4-1: Product: USB Receiver
[ 3.284728] usb 4-1: Manufacturer: Logitech
[ 3.293946] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/0003:046D:C501.0002/input/input8
[ 3.349794] hid-generic 0003:046D:C501.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:12.1-1/input0
[ 3.697612] usb 4-3: new full-speed USB device number 3 using ohci-pci
[ 3.882547] usb 4-3: New USB device found, idVendor=0a5c, idProduct=4500, bcdDevice= 1.00
[ 3.882600] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.882643] usb 4-3: Product: BCM2046B1
[ 3.882684] usb 4-3: Manufacturer: Broadcom
[ 3.884601] hub 4-3:1.0: USB hub found
[ 3.886544] hub 4-3:1.0: 3 ports detected
[ 3.950935] scsi 8:0:0:0: Direct-Access Generic STORAGE DEVICE 9732 PQ: 0 ANSI: 0
[ 3.951798] scsi 8:0:0:1: Direct-Access Generic STORAGE DEVICE 9732 PQ: 0 ANSI: 0
[ 3.953502] sd 8:0:0:0: [sdd] Media removed, stopped polling
[ 3.953791] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[ 3.954128] sd 8:0:0:1: [sde] Media removed, stopped polling
[ 3.954392] sd 8:0:0:1: [sde] Attached SCSI removable disk
[ 4.181610] usb 4-3.1: new full-speed USB device number 4 using ohci-pci
[ 4.288522] usb 4-3.1: New USB device found, idVendor=0a5c, idProduct=4502, bcdDevice= 1.00
[ 4.288573] usb 4-3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.295824] input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3.1/4-3.1:1.0/0003:0A5C:4502.0003/input/input9
[ 7.521349] [drm] amdgpu kernel modesetting enabled.
[ 7.521624] amdgpu: Virtual CRAT table created for CPU
[ 7.521680] amdgpu: Topology: Add CPU node
[ 7.522065] [drm] initializing kernel modesetting (POLARIS12 0x1002:0x699F 0x1002:0x0000 0xC7).
[ 7.522130] [drm] register mmio base: 0xFE7C0000
[ 7.522172] [drm] register mmio size: 262144
[ 7.522370] [drm] add ip block number 0 <vi_common>
[ 7.522412] [drm] add ip block number 1 <gmc_v8_0>
[ 7.522454] [drm] add ip block number 2 <tonga_ih>
[ 7.522496] [drm] add ip block number 3 <gfx_v8_0>
[ 7.522537] [drm] add ip block number 4 <sdma_v3_0>
[ 7.522579] [drm] add ip block number 5 <powerplay>
[ 7.522620] [drm] add ip block number 6 <dm>
[ 7.522662] [drm] add ip block number 7 <uvd_v6_0>
[ 7.522703] [drm] add ip block number 8 <vce_v3_0>
[ 7.522998] amdgpu 0000:01:00.0: No more image in the PCI ROM
[ 7.524141] amdgpu 0000:01:00.0: amdgpu: Fetched VBIOS from ROM BAR
[ 7.524185] amdgpu: ATOM BIOS: xxx-xxx-xxx
[ 7.524456] [drm] UVD is enabled in VM mode
[ 7.524497] [drm] UVD ENC is enabled in VM mode
[ 7.524539] [drm] VCE enabled in VM mode
[ 7.524622] amdgpu 0000:01:00.0: vgaarb: deactivate vga console
[ 7.525880] Console: switching to colour dummy device 80x25
[ 7.525887] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[ 7.525893] amdgpu 0000:01:00.0: amdgpu: PCIE atomic ops is not supported
[ 7.525932] [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[ 7.526176] amdgpu 0000:01:00.0: amdgpu: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
[ 7.526181] amdgpu 0000:01:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
[ 7.526190] [drm] Detected VRAM RAM=4096M, BAR=256M
[ 7.526193] [drm] RAM width 128bits GDDR5
[ 7.526394] [drm] amdgpu: 4096M of VRAM memory ready
[ 7.526398] [drm] amdgpu: 16050M of GTT memory ready.
[ 7.526421] [drm] GART: num cpu pages 65536, num gpu pages 65536
[ 7.526928] [drm] PCIE GART of 256M enabled (table at 0x000000F400900000).
[ 7.528062] [drm] Chained IB support enabled!
[ 7.532608] amdgpu: hwmgr_sw_init smu backed is polaris10_smu
[ 7.535074] [drm] Found UVD firmware Version: 1.130 Family ID: 16
[ 7.537215] [drm] Found VCE firmware Version: 53.26 Binary ID: 3
[ 7.589731] hid-generic 0003:0A5C:4502.0003: input,hidraw2: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:12.1-3.1/input0
[ 7.661571] usb 4-3.2: new full-speed USB device number 5 using ohci-pci
[ 7.768331] usb 4-3.2: New USB device found, idVendor=0a5c, idProduct=4503, bcdDevice= 1.00
[ 7.768339] usb 4-3.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.775666] input: HID 0a5c:4503 Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3.2/4-3.2:1.0/0003:0A5C:4503.0004/input/input10
[ 7.775803] hid-generic 0003:0A5C:4503.0004: input,hidraw3: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:12.1-3.2/input0
[ 7.849584] usb 4-3.3: new full-speed USB device number 6 using ohci-pci
[ 7.875214] [drm] Display Core v3.2.301 initialized on DCE 11.2
[ 7.964380] usb 4-3.3: New USB device found, idVendor=0a5c, idProduct=2146, bcdDevice= 2.73
[ 7.964412] usb 4-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.964428] usb 4-3.3: Product: BCM92046DG-CL1ROM
[ 7.964439] usb 4-3.3: Manufacturer: Broadcom Corp
[ 7.964450] usb 4-3.3: SerialNumber: 00027216672F
[ 8.030114] [drm] UVD and UVD ENC initialized successfully.
[ 8.140012] [drm] VCE initialized successfully.
[ 8.140773] kfd kfd: amdgpu: skipped device 1002:699f, PCI rejects atomics 730<0
[ 8.140796] amdgpu 0000:01:00.0: amdgpu: SE 2, SH per SE 1, CU per SH 5, active_cu_number 8
[ 8.144978] amdgpu 0000:01:00.0: amdgpu: Using BACO for runtime pm
[ 8.145298] [drm] Initialized amdgpu 3.61.0 for 0000:01:00.0 on minor 0
[ 8.172997] fbcon: amdgpudrmfb (fb0) is primary device
[ 8.227364] Console: switching to colour frame buffer device 160x64
[ 8.241871] amdgpu 0000:01:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[ 8.461571] raid6: sse2x4 gen() 9704 MB/s
[ 8.529553] raid6: sse2x2 gen() 9492 MB/s
[ 8.597552] raid6: sse2x1 gen() 7582 MB/s
[ 8.597596] raid6: using algorithm sse2x4 gen() 9704 MB/s
[ 8.665552] raid6: .... xor() 2047 MB/s, rmw enabled
[ 8.665597] raid6: using intx1 recovery algorithm
[ 8.671265] xor: measuring software checksum speed
[ 8.671506] prefetch64-sse : 15940 MB/sec
[ 8.671751] generic_sse : 14302 MB/sec
[ 8.671763] xor: using function: prefetch64-sse (15940 MB/sec)
[ 8.676976] async_tx: api initialized (async)
[ 8.938935] PM: Image not found (code -22)
[ 9.199447] EXT4-fs (dm-1): mounted filesystem a051ef5e-402a-4576-96d9-a3bbb3de46d9 ro with ordered data mode. Quota mode: none.
[ 9.238014] EXT4-fs (dm-5): mounted filesystem 7a6b8075-ba5b-48de-9bbd-94e96c101484 ro with ordered data mode. Quota mode: none.
[ 9.332306] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 9.480340] systemd[1]: Inserted module 'autofs4'
[ 9.518073] systemd[1]: systemd 257.8-1~deb13u2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN
2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE)
[ 9.520379] systemd[1]: Detected architecture x86-64.
[ 9.524680] systemd[1]: Hostname set to <elle>.
[ 9.813277] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[ 10.067531] systemd-sysv-generator[470]: SysV service '/etc/init.d/preload' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[ 10.069325] systemd-sysv-generator[470]: Please update package to include a native systemd unit file.
[ 10.072491] systemd-sysv-generator[470]: ! This compatibility logic is deprecated, expect removal soon. !
[ 10.086770] systemd-sysv-generator[470]: SysV service '/etc/init.d/mono-xsp4' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[ 10.088817] systemd-sysv-generator[470]: Please update package to include a native systemd unit file.
[ 10.089754] systemd-sysv-generator[470]: ! This compatibility logic is deprecated, expect removal soon. !
[ 10.091500] systemd-sysv-generator[470]: SysV service '/etc/init.d/lpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[ 10.091503] systemd-sysv-generator[470]: Please update package to include a native systemd unit file.
[ 10.091505] systemd-sysv-generator[470]: ! This compatibility logic is deprecated, expect removal soon. !
[ 10.092729] systemd-sysv-generator[470]: SysV service '/etc/init.d/edac' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[ 10.096868] systemd-sysv-generator[470]: Please update package to include a native systemd unit file.
[ 10.097869] systemd-sysv-generator[470]: ! This compatibility logic is deprecated, expect removal soon. !
[ 10.326719] systemd[1]: Queued start job for default target graphical.target.
[ 10.371904] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 10.376413] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 10.378357] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 10.381093] systemd[1]: Created slice system-xfs_scrub.slice - xfs_scrub background service slice.
[ 10.383715] systemd[1]: Created slice user.slice - User and Session Slice.
[ 10.385743] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 10.388155] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 10.390243] systemd[1]: Expecting device dev-disk-by\x2duuid-e919b20a\x2d56ba\x2d4f41\x2d846f\x2d68f2b2b492e9.device - /dev/disk/by-uuid/e919b20a-56ba-4f41-846f-68f2b2b492e9...
[ 10.394279] systemd[1]: Expecting device dev-mapper-raid_vg\x2dhome_lv.device - /dev/mapper/raid_vg-home_lv...
[ 10.396894] systemd[1]: Expecting device dev-mapper-rootvg\x2dopt_lv.device - /dev/mapper/rootvg-opt_lv...
[ 10.399222] systemd[1]: Expecting device dev-mapper-rootvg\x2dusr_lv.device - /dev/mapper/rootvg-usr_lv...
[ 10.401437] systemd[1]: Expecting device dev-mapper-rootvg\x2dvar_lv.device - /dev/mapper/rootvg-var_lv...
[ 10.403834] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[ 10.407070] systemd[1]: Reached target slices.target - Slice Units.
[ 10.409699] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
[ 10.411956] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
[ 10.421466] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket.
[ 10.423273] systemd[1]: Listening on syslog.socket - Syslog Socket.
[ 10.431073] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
[ 10.434577] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption.
[ 10.436630] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 10.439018] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 10.442092] systemd[1]: Listening on systemd-journald.socket - Journal Sockets.
[ 10.444166] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 10.444189] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 10.444346] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 10.448479] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 10.452607] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[ 10.456817] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 10.459480] systemd[1]: run-lock.mount: Directory /run/lock to mount over is not empty, mounting anyway.
[ 10.460922] systemd[1]: Mounting run-lock.mount - Legacy Locks Directory /run/lock...
[ 10.494396] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 10.497664] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 10.499439] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
[ 10.501135] systemd[1]: Starting blk-availability.service - Availability of block devices...
[ 10.506837] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 10.511087] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 10.515630] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 10.519433] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 10.524173] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[ 10.528698] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 10.531874] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[ 10.533981] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 10.534079] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/Hiber
nateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[ 10.541665] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 10.551203] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 10.553154] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 10.554835] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 10.562896] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 10.564472] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials...
[ 10.573634] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 10.580388] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[ 10.580715] systemd-journald[494]: Collecting audit messages is disabled.
[ 10.586944] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 10.589468] systemd[1]: Mounted run-lock.mount - Legacy Locks Directory /run/lock.
[ 10.592614] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 10.596153] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 10.598325] EXT4-fs (dm-1): re-mounted a051ef5e-402a-4576-96d9-a3bbb3de46d9 r/w.
[ 10.600238] lp: driver loaded but no devices found
[ 10.605609] systemd[1]: Finished blk-availability.service - Availability of block devices.
[ 10.608772] EXT4-fs (dm-5): re-mounted 7a6b8075-ba5b-48de-9bbd-94e96c101484 r/w.
[ 10.609320] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 10.612765] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 10.613151] ppdev: user-space parallel port driver
[ 10.614733] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[ 10.617898] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 10.618154] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[ 10.622334] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 10.622568] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 10.625891] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 10.626104] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[ 10.630205] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 10.632166] PCI parallel port detected: 1415:c110, I/O at 0xe800(0xe400), IRQ 16
[ 10.632316] parport0: PC-style at 0xe800 (0xe400), irq 16 [PCSPP,TRISTATE,EPP]
[ 10.634053] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials.
[ 10.638803] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 10.646781] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 10.650149] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[ 10.684779] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[ 10.690573] systemd[1]: Started systemd-journald.service - Journal Service.
[ 10.729772] lp0: using parport0 (interrupt-driven).
[ 10.753263] loop: module loaded
[ 10.763779] f71882fg: Found f71889fg chip at 0x600, revision 19
[ 10.765216] ACPI Warning: SystemIO range 0x0000000000000600-0x0000000000000607 conflicts with OpRegion 0x0000000000000605-0x0000000000000606 (\HMOR) (20240827/utaddress-204)
[ 10.767505] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 10.944764] f71882fg: Found f71889fg chip at 0x600, revision 19
[ 10.949350] ACPI Warning: SystemIO range 0x0000000000000600-0x0000000000000607 conflicts with OpRegion 0x0000000000000605-0x0000000000000606 (\HMOR) (20240827/utaddress-204)
[ 10.952108] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 11.053670] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 11.055461] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 11.057168] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 11.064223] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 11.072400] sd 8:0:0:0: Attached scsi generic sg4 type 0
[ 11.083801] sd 8:0:0:1: Attached scsi generic sg5 type 0
[ 11.134633] f71882fg: Found f71889fg chip at 0x600, revision 19
[ 11.148111] ACPI Warning: SystemIO range 0x0000000000000600-0x0000000000000607 conflicts with OpRegion 0x0000000000000605-0x0000000000000606 (\HMOR) (20240827/utaddress-204)
[ 11.150858] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 11.327179] input: PC Speaker as /devices/platform/pcspkr/input/input12
[ 11.396713] acpi_cpufreq: overriding BIOS provided _PSD data
[ 11.479896] Bluetooth: Core ver 2.22
[ 11.484890] NET: Registered PF_BLUETOOTH protocol family
[ 11.484895] Bluetooth: HCI device and connection manager initialized
[ 11.484985] Bluetooth: HCI socket layer initialized
[ 11.484988] Bluetooth: L2CAP socket layer initialized
[ 11.484995] Bluetooth: SCO socket layer initialized
[ 11.495218] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 11.513006] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 11.513316] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 11.517393] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 11.520072] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 11.617608] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[ 11.645332] Adding 16601084k swap on /dev/sdc2. Priority:-2 extents:1 across:16601084k SSDs
[ 11.700458] EXT4-fs (dm-0): mounted filesystem b2d0e083-4de1-4cc1-b788-eb05806f75f1 r/w with ordered data mode. Quota mode: none.
[ 11.897459] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 11.917419] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
[ 11.919983] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[ 11.923371] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[ 11.925535] kvm_amd: Nested Virtualization enabled
[ 11.925539] kvm_amd: Nested Paging enabled
[ 11.925540] kvm_amd: LBR virtualization supported
[ 11.925783] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[ 11.926349] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
[ 12.498894] MCE: In-kernel MCE decoding enabled.
[ 12.735691] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC889: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 12.736788] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.737703] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 12.738601] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 12.738603] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x11/0x1e
[ 12.738606] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 12.740699] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
[ 12.746196] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
[ 12.746199] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
[ 12.785174] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
[ 12.785376] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
[ 12.785512] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
[ 12.785800] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input21
[ 12.794018] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input22
[ 12.794279] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input23
[ 12.794556] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input24
[ 12.794745] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input25
[ 12.822081] usbcore: registered new interface driver btusb
[ 12.834026] usb 4-3.1: input irq status -75 received
[ 12.850035] usb 4-3.1: input irq status -75 received
[ 12.866024] usb 4-3.1: input irq status -75 received
[ 12.882048] usb 4-3.1: input irq status -75 received
[ 12.898043] usb 4-3.1: input irq status -75 received
[ 12.914019] usb 4-3.1: input irq status -75 received
[ 12.930018] usb 4-3.1: input irq status -75 received
[ 12.946028] usb 4-3.1: input irq status -75 received
[ 12.962016] usb 4-3.1: input irq status -75 received
[ 12.978031] usb 4-3.1: input irq status -75 received
[ 13.326676] EXT4-fs (dm-3): mounted filesystem cf6b17d4-bbca-4940-a496-c8c4dc0bb471 r/w with ordered data mode. Quota mode: none.
[ 13.334602] EXT4-fs (dm-7): mounted filesystem 1d7aba3a-90fe-4238-b694-373261ea89e1 r/w with ordered data mode. Quota mode: none.
[ 13.925985] RPC: Registered named UNIX socket transport module.
[ 13.925991] RPC: Registered udp transport module.
[ 13.925993] RPC: Registered tcp transport module.
[ 13.925993] RPC: Registered tcp-with-tls transport module.
[ 13.925994] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 14.111522] systemd-journald[494]: Received client request to flush runtime journal.
[ 14.112283] ath: EEPROM regdomain: 0x30
[ 14.112287] ath: EEPROM indicates we should expect a direct regpair map
[ 14.112288] ath: Country alpha2 being used: AM
[ 14.112289] ath: Regpair used: 0x30
[ 14.116312] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.137609] ieee80211 phy0: Atheros AR5418 MAC/BB Rev:2 AR2133 RF Rev:81 mem=0x000000006db71cdc, irq=19
[ 14.149121] f71882fg: Found f71889fg chip at 0x600, revision 19
[ 14.150378] ACPI Warning: SystemIO range 0x0000000000000600-0x0000000000000607 conflicts with OpRegion 0x0000000000000605-0x0000000000000606 (\HMOR) (20240827/utaddress-204)
[ 14.150385] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 14.661590] audit: type=1400 audit(1758636088.908:2): apparmor="STATUS" operation="profile_load" profile="" name="QtWebEngineProcess" pid=1241 comm="apparmor_parser"
[ 14.664346] audit: type=1400 audit(1758636088.912:3): apparmor="STATUS" operation="profile_load" profile="" name="1password" pid=1238 comm="apparmor_parser"
[ 14.667097] audit: type=1400 audit(1758636088.912:4): apparmor="STATUS" operation="profile_load" profile="" name="Discord" pid=1239 comm="apparmor_parser"
[ 14.667101] audit: type=1400 audit(1758636088.912:5): apparmor="STATUS" operation="profile_load" profile="" name=4D6F6E676F444220436F6D70617373 pid=1240 comm="apparmor_parser"
[ 14.667104] audit: type=1400 audit(1758636088.912:6): apparmor="STATUS" operation="profile_load" profile="" name="balena-etcher" pid=1243 comm="apparmor_parser"
[ 14.667106] audit: type=1400 audit(1758636088.912:7): apparmor="STATUS" operation="profile_load" profile="" name="brave" pid=1251 comm="apparmor_parser"
[ 14.667108] audit: type=1400 audit(1758636088.916:8): apparmor="STATUS" operation="profile_load" profile="" name="busybox" pid=1253 comm="apparmor_parser"
[ 14.667110] audit: type=1400 audit(1758636088.916:9): apparmor="STATUS" operation="profile_load" profile="" name="ch-checkns" pid=1255 comm="apparmor_parser"
[ 14.668256] audit: type=1400 audit(1758636088.916:10): apparmor="STATUS" operation="profile_load" profile="" name="ch-run" pid=1256 comm="apparmor_parser"
[ 14.688719] audit: type=1400 audit(1758636088.916:11): apparmor="STATUS" operation="profile_load" profile="" name="buildah" pid=1252 comm="apparmor_parser"
[ 14.792724] f71882fg: Found f71889fg chip at 0x600, revision 19
[ 14.795250] ACPI Warning: SystemIO range 0x0000000000000600-0x0000000000000607 conflicts with OpRegion 0x0000000000000605-0x0000000000000606 (\HMOR) (20240827/utaddress-204)
[ 14.798882] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 15.630067] zram: Added device: zram0
[ 15.648273] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.648281] Bluetooth: BNEP filters: protocol multicast
[ 15.648290] Bluetooth: BNEP socket layer initialized
[ 15.655742] Bluetooth: MGMT ver 1.23
[ 15.680116] Bluetooth: RFCOMM TTY layer initialized
[ 15.681687] Bluetooth: RFCOMM socket layer initialized
[ 15.683023] Bluetooth: RFCOMM ver 1.11
[ 15.708050] zram0: detected capacity change from 0 to 32871696
[ 15.717667] NET: Registered PF_ALG protocol family
[ 15.730425] Adding 16435844k swap on /dev/zram0. Priority:100 extents:1 across:16435844k SS
[ 15.875301] RTL8211B Gigabit Ethernet r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
[ 15.920474] NET: Registered PF_QIPCRTR protocol family
[ 16.049953] r8169 0000:02:00.0 eth0: Link is Down
[ 16.052956] RTL8211B Gigabit Ethernet r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[ 16.192208] r8169 0000:03:00.0 eth1: Link is Down
[ 18.340229] r8169 0000:02:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 18.344088] r8169 0000:02:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 19.491906] evm: overlay not supported
[ 22.309473] netfs: FS-Cache loaded
[ 22.419476] Key type dns_resolver registered
[ 22.516759] NFSD: Using nfsdcld client tracking operations.
[ 22.516770] NFSD: no clients to reclaim, skipping NFSv4 grace period (net f0000000)
[ 22.722938] NFS: Registering the id_resolver key type
[ 22.722958] Key type id_resolver registered
[ 22.722961] Key type id_legacy registered
Can provide boot log for bookworm kernel, if you need so.