Bug#1098417: linux-image-6.1.0-31-arm64: Amlogic notorious display lag newer chipset S905X3
Package: src:linux
Version: 6.1.128-1
Severity: important
X-Debbugs-Cc: buffoon67@aol.com
Dear Maintainer,
Amlogic notorious dreadful display lag,
I suppose kernel was mended for S905X chipset,
my Khadas VIM1 S905X is fine,
S905X3 BPI-M2, BPI-M5, ODROID-C4 sbc boards,
I suppose Armbian compiled kernel to 'work,'
P.s., I am in console, not in GUI X,
firmware meson libgl1-mesa-dri libglx-mesa0 makes no difference,
and those 2 packages are not in Armbian Bookworm minimal.
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these template lines ***
-- Package-specific info:
** Version:
Linux version 6.1.0-31-arm64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.128-1 (2025-02-07)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-6.1.0-31-arm64 root=UUID=7cb32c55-1fd3-4fe0-afdd-96ddbc9994b0 ro console=ttyAML0 console=tty0 quiet
** Tainted: DWC (1664)
* kernel died recently, i.e. there was an OOPS or BUG
* kernel issued warning
* staging driver was loaded
** Kernel log:
Unable to read kernel log; any relevant messages should be attached
** Model information
Device Tree model: Banana Pi BPI-M5
** Loaded modules:
aes_ce_ccm
scpi_cpufreq
arm_scpi
cpufreq_conservative
cpufreq_powersave
cpufreq_userspace
cpufreq_ondemand
nls_ascii
nls_cp437
vfat
fat
ath9k_htc
ath9k_common
ath9k_hw
ath
mac80211
libarc4
cfg80211
meson_vdec(C)
rfkill
sg
joydev
videobuf2_dma_contig
v4l2_mem2mem
videobuf2_memops
meson_dw_hdmi
videobuf2_v4l2
meson_drm
dw_hdmi
videobuf2_common
cec
videodev
snd_soc_meson_axg_sound_card
meson_saradc
snd_soc_meson_g12a_tohdmitx
meson_ir
pwm_meson
snd_soc_meson_g12a_toacodec
meson_gxbb_wdt
display_connector
panfrost
snd_soc_meson_axg_tdmin
rc_core
drm_display_helper
snd_soc_meson_axg_frddr
snd_soc_meson_axg_tdm_interface
snd_soc_meson_codec_glue
snd_soc_meson_axg_tdmout
snd_soc_meson_axg_toddr
snd_soc_meson_card_utils
drm_dma_helper
governor_simpleondemand
aes_ce_blk
snd_soc_meson_t9015
snd_soc_meson_axg_fifo
snd_soc_meson_axg_tdm_formatter
gpu_sched
snd_soc_core
drm_kms_helper
aes_ce_cipher
mc
polyval_ce
drm_shmem_helper
snd_pcm_dmaengine
polyval_generic
ghash_ce
meson_canvas
gf128mul
snd_pcm
drm
snd_timer
sha2_ce
snd
sha256_arm64
evdev
soundcore
sha1_ce
leds_gpio
efi_pstore
nvmem_meson_efuse
meson_rng
cpufreq_dt
efivarfs
ext4
crc16
mbcache
jbd2
crc32c_generic
sd_mod
t10_pi
crc64_rocksoft
crc64
crc_t10dif
crct10dif_generic
hid_generic
usbhid
hid
uas
usb_storage
scsi_mod
scsi_common
dwmac_generic
xhci_plat_hcd
meson_gxl
xhci_hcd
realtek
dwc2
dwc3
udc_core
usbcore
ulpi
dwmac_meson8b
stmmac_platform
axg_audio
stmmac
sclk_div
clk_phase
pcs_xpcs
mdio_mux_meson_g12a
mdio_mux
phylink
reset_meson_audio_arb
rtc_meson_vrtc
of_mdio
dwc3_meson_g12a
roles
usb_common
fixed_phy
fwnode_mdio
libphy
crct10dif_ce
crct10dif_common
pwm_regulator
gpio_regulator
fixed
gpio_keys
adc_keys
industrialio
** Network interface configuration:
*** /etc/network/interfaces:
auto lo
iface lo inet loopback
iface wlan0 inet dhcp
wpa-ssid BT-FRAHWW
wpa-psk **************
post-up iwconfig wlan0 txpower 15
post-up iwconfig wlan0 rate 5.5M
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: end0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether ae:f7:db:f6:74:4c brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether ee:2d:d0:c0:a0:09 brd ff:ff:ff:ff:ff:ff permaddr 00:12:7b:21:8e:01
inet 192.168.1.251/24 brd 192.168.1.255 scope global dynamic wlan0
valid_lft 83833sec preferred_lft 83833sec
inet6 2a00:23c7:fa06:f901:ec2d:d0ff:fec0:a009/64 scope global dynamic mngtmpaddr
valid_lft 292sec preferred_lft 112sec
inet6 fe80::ec2d:d0ff:fec0:a009/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
end0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 12548997 13596 0 0 0 0 0 0 468971 3490 0 0 0 0 0 0
*** Protocol statistics:
Ip:
Forwarding: 2
624 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
622 incoming packets delivered
602 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
20 active connection openings
0 passive connection openings
0 failed connection attempts
1 connection resets received
0 connections established
8163 segments received
2428 segments sent out
0 segments retransmitted
0 bad segments received
31 resets sent
Udp:
601 packets received
0 packets to unknown port received
0 packet receive errors
602 packets sent
0 receive buffer errors
0 send buffer errors
UdpLite:
TcpExt:
2 TCP sockets finished time wait in fast timer
7 delayed acks sent
1 delayed acks further delayed because of locked socket
2486 packet headers predicted
41 acknowledgments not containing data payload received
44 predicted acknowledgments
TCPBacklogCoalesce: 1041
15 connections reset due to unexpected data
1 connections reset due to early user close
TCPRcvCoalesce: 5194
TCPOFOQueue: 1
TCPAutoCorking: 6
TCPOrigDataSent: 155
TCPDelivered: 161
IpExt:
InMcastPkts: 21
InOctets: 49514
OutOctets: 44858
InMcastOctets: 756
InNoECTPkts: 624
MPTcpExt:
** PCI devices:
** USB devices:
Bus 002 Device 002: ID 2109:0817 VIA Labs, Inc. USB3.0 Hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 03f0:354a HP, Inc Slim Keyboard
Bus 001 Device 004: ID 040d:3801 VIA Technologies, Inc. VIA USB2.0 WLAN
Bus 001 Device 003: ID 0bda:0119 Realtek Semiconductor Corp. Storage Device (SD card reader)
Bus 001 Device 002: ID 2109:2817 VIA Labs, Inc. USB2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 12.9
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: arm64 (aarch64)
Kernel: Linux 6.1.0-31-arm64 (SMP w/4 CPU threads)
Kernel taint flags: TAINT_DIE, TAINT_WARN, TAINT_CRAP
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB:en
Shell: /bin/sh linked to /usr/bin/dash
Init: sysvinit (via /sbin/init)
LSM: AppArmor: enabled
Versions of packages linux-image-6.1.0-31-arm64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.142+deb12u1
ii kmod 30+20221128-1
ii linux-base 4.9
Versions of packages linux-image-6.1.0-31-arm64 recommends:
ii apparmor 3.0.8-3
pn firmware-linux-free <none>
Versions of packages linux-image-6.1.0-31-arm64 suggests:
pn debian-kernel-handbook <none>
pn linux-doc-6.1 <none>
Versions of packages linux-image-6.1.0-31-arm64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: