--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-4.19.0-6-amd64: High load by kworker, shutdown or reboot hangs
- From: Olaf Skibbe <news@kravcenko.com>
- Date: Wed, 11 Dec 2019 17:57:34 +0100
- Message-id: <157608345469.21772.16693775651794500507.reportbug@duane.cam.uni-heidelberg.de>
Package: src:linux
Version: 4.19.67-2+deb10u2
Severity: normal
Tags: newcomer
Dear Maintainer,
I experience the following issue:
When the system is running for some time (usually a few days, but sometimes
some hours), the load rises to about 5. The kernel log (dmesg) shows this
message (and repeats it several times):
[196473.819189] INFO: task kworker/u16:0:19009 blocked for more than 120
seconds.
[196473.819196] Not tainted 4.19.0-6-amd64 #1 Debian 4.19.67-2+deb10u2
[196473.819199] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables
this message.
[196473.819202] kworker/u16:0 D 0 19009 2 0x80000000
[196473.819225] Workqueue: scsi_tmf_6 scmd_eh_abort_handler [scsi_mod]
[196473.819228] Call Trace:
[196473.819239] ? __schedule+0x2a2/0x870
[196473.819244] ? __switch_to_asm+0x41/0x70
[196473.819249] schedule+0x28/0x80
[196473.819253] schedule_timeout+0x26d/0x390
[196473.819259] ? __switch_to_asm+0x35/0x70
[196473.819263] ? __switch_to_asm+0x41/0x70
[196473.819267] ? __switch_to_asm+0x35/0x70
[196473.819271] ? __switch_to_asm+0x41/0x70
[196473.819275] ? __switch_to_asm+0x35/0x70
[196473.819280] ? __switch_to_asm+0x41/0x70
[196473.819284] ? __switch_to_asm+0x35/0x70
[196473.819288] ? __switch_to_asm+0x41/0x70
[196473.819292] wait_for_completion+0x11f/0x190
[196473.819299] ? wake_up_q+0x70/0x70
[196473.819306] command_abort+0x5b/0x90 [usb_storage]
[196473.819320] scmd_eh_abort_handler+0x85/0x220 [scsi_mod]
[196473.819327] process_one_work+0x1a7/0x3a0
[196473.819332] worker_thread+0x30/0x390
[196473.819337] ? create_worker+0x1a0/0x1a0
[196473.819340] kthread+0x112/0x130
[196473.819344] ? kthread_bind+0x30/0x30
[196473.819349] ret_from_fork+0x35/0x40
The load then stays high until shutdown. It remains fully usable, top looks
like this:
top - 17:52:44 up 2 days, 6:57, 1 user, load average: 5.43, 5.21, 4.32
Tasks: 217 total, 1 running, 216 sleeping, 0 stopped, 0 zombie
%Cpu0 : 2.3 us, 1.3 sy, 0.0 ni, 96.4 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st
%Cpu1 : 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st
%Cpu2 : 4.7 us, 2.5 sy, 0.0 ni, 92.7 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st
%Cpu3 : 1.0 us, 0.3 sy, 0.0 ni, 0.0 id, 98.7 wa, 0.0 hi, 0.0 si, 0.0 st
%Cpu4 : 0.0 us, 0.3 sy, 0.0 ni, 0.0 id, 99.7 wa, 0.0 hi, 0.0 si, 0.0 st
%Cpu5 : 0.3 us, 0.3 sy, 0.0 ni, 99.3 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st
%Cpu6 : 0.0 us, 0.3 sy, 0.0 ni, 99.7 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st
%Cpu7 : 1.0 us, 0.3 sy, 0.0 ni, 98.7 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st
MiB Mem : 31998.7 total, 26462.0 free, 1366.2 used, 4170.5 buff/cache
MiB Swap: 32595.0 total, 32595.0 free, 0.0 used. 29682.1 avail Mem
At shutdown, the system hangs for about 20 minutes with the message "watchdog:
watchdog did not stop" (quoted from mind memory) until it finally shuts down.
This is always related to the increased load and the respective dmesg messages.
I experienced this behaviour about 20 times within the last few months. I did
not find any workaround t solve this situation.
Cheers,
Olaf
-- Package-specific info:
** Version:
Linux version 4.19.0-6-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u2 (2019-11-11)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-amd64 root=UUID=889f4d9e-013e-4a64-8e5d-422d4675126f ro quiet
** Not tainted
** Kernel log:
Unable to read kernel log; any relevant messages should be attached
** Model information
sys_vendor: FUJITSU
product_name: ESPRIMO_P956
product_version:
chassis_vendor: FUJITSU
chassis_version: C$WX06
bios_vendor: FUJITSU // American Megatrends Inc.
bios_version: V5.0.0.11 R1.17.0 for D3402-A1x
board_vendor: FUJITSU
board_name: D3402-A1
board_version: S26361-D3402-A1
** Loaded modules:
intel_rapl
snd_hda_codec_hdmi
snd_hda_codec_realtek
x86_pkg_temp_thermal
intel_powerclamp
snd_hda_codec_generic
coretemp
kvm_intel
snd_hda_intel
snd_hda_codec
kvm
mei_wdt
snd_hda_core
sg
irqbypass
snd_hwdep
crct10dif_pclmul
crc32_pclmul
snd_pcm
ghash_clmulni_intel
snd_timer
intel_cstate
intel_uncore
snd
iTCO_wdt
iTCO_vendor_support
pcspkr
intel_rapl_perf
soundcore
mei_me
mei
intel_pch_thermal
tpm_crb
pcc_cpufreq
fujitsu_laptop
sparse_keymap
tpm_tis
tpm_tis_core
tpm
evdev
rng_core
acpi_pad
parport_pc
ppdev
lp
parport
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
hid_generic
crc32c_generic
usbhid
fscrypto
ecb
hid
ums_realtek
uas
usb_storage
sr_mod
cdrom
sd_mod
i915
crc32c_intel
i2c_algo_bit
drm_kms_helper
xhci_pci
ahci
xhci_hcd
libahci
drm
libata
usbcore
e1000e
scsi_mod
aesni_intel
usb_common
aes_x86_64
crypto_simd
cryptd
glue_helper
i2c_i801
wmi
thermal
fan
video
button
** Network interface configuration:
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp0s31f6: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 90:1b:0e:c6:ee:9e brd ff:ff:ff:ff:ff:ff
inet 129.206.140.243/24 brd 129.206.140.255 scope global dynamic noprefixroute enp0s31f6
valid_lft 74047sec preferred_lft 74047sec
inet6 fe80::921b:eff:fec6:ee9e/64 scope link noprefixroute
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 496 10 0 0 0 0 0 0 496 10 0 0 0 0 0 0
enp0s31f6: 1219927647 3444890 0 0 0 0 0 38709 1472882925 1731410 0 0 0 0 0 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Skylake Host Bridge/DRAM Registers [8086:191f] (rev 07)
Subsystem: Fujitsu Technology Solutions Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers [1734:121c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: skl_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 530 [8086:1912] (rev 06) (prog-if 00 [VGA controller])
Subsystem: Fujitsu Technology Solutions HD Graphics 530 [1734:121c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 125
Region 0: Memory at f6000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller [8086:a12f] (rev 31) (prog-if 30 [XHCI])
Subsystem: Fujitsu Technology Solutions 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller [1734:121d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 124
Region 0: Memory at f7030000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-H Thermal subsystem [8086:a131] (rev 31)
Subsystem: Fujitsu Technology Solutions 100 Series/C230 Series Chipset Family Thermal Subsystem [1734:121d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f704f000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-H CSME HECI #1 [8086:a13a] (rev 31)
Subsystem: Fujitsu Technology Solutions 100 Series/C230 Series Chipset Family MEI Controller [1734:121d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 126
Region 0: Memory at f704e000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:16.3 Serial controller [0700]: Intel Corporation Sunrise Point-H KT Redirection [8086:a13d] (rev 31) (prog-if 02 [16550])
Subsystem: Fujitsu Technology Solutions 100 Series/C230 Series Chipset Family KT Redirection [1734:121d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: I/O ports at f0a0 [size=8]
Region 1: Memory at f704d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-H SATA controller [AHCI mode] [8086:a102] (rev 31) (prog-if 01 [AHCI 1.0])
Subsystem: Fujitsu Technology Solutions Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode] [1734:121d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 123
Region 0: Memory at f7048000 (32-bit, non-prefetchable) [size=8K]
Region 1: Memory at f704c000 (32-bit, non-prefetchable) [size=256]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f704b000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-H LPC Controller [8086:a146] (rev 31)
Subsystem: Fujitsu Technology Solutions Q170 Chipset LPC/eSPI Controller [1734:121d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-H PMC [8086:a121] (rev 31)
Subsystem: Fujitsu Technology Solutions 100 Series/C230 Series Chipset Family Power Management Controller [1734:121d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f7044000 (32-bit, non-prefetchable) [size=16K]
00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-H HD Audio [8086:a170] (rev 31)
Subsystem: Fujitsu Technology Solutions 100 Series/C230 Series Chipset Family HD Audio Controller [1734:121e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 127
Region 0: Memory at f7040000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at f7020000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-H SMBus [8086:a123] (rev 31)
Subsystem: Fujitsu Technology Solutions 100 Series/C230 Series Chipset Family SMBus [1734:121d]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f704a000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (2) I219-LM [8086:15b7] (rev 31)
Subsystem: Fujitsu Technology Solutions Ethernet Connection (2) I219-LM [1734:121f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 122
Region 0: Memory at f7000000 (32-bit, non-prefetchable) [size=128K]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 0bf8:101e Fujitsu Siemens Computers
Bus 001 Device 004: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 003: ID 0bda:0184 Realtek Semiconductor Corp. RTS5182 Card Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 10.2
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'proposed-updates'), (500, 'stable'), (500, 'oldstable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.19.0-6-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-6-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133+deb10u1
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-4.19.0-6-amd64 recommends:
ii apparmor 2.13.2-10
ii firmware-linux-free 3.4
Versions of packages linux-image-4.19.0-6-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02+dfsg1-20
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-6-amd64 is related to:
ii firmware-amd-graphics 20190114-2
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20190114-2
ii firmware-misc-nonfree 20190114-2
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---