Your message dated Mon, 05 Dec 2022 19:03:07 +0100 with message-id <3405942.QJadu78ljV@bagend> and subject line Re: Bug#1012210: linux-image-5.10.0-14-amd64: Kernels of Bullseye and Testing (5.10 and 5.17) hang at boot has caused the Debian Bug report #1012306, regarding linux-image-5.10.0-14-amd64: boot failure in VM after upgrading from -13 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 1012306: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1012306 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-5.10.0-14-amd64: Kernels of Bullseye and Testing (5.10 and 5.17) hang at boot
- From: Markus Kolb <debian@tower-net.de>
- Date: Wed, 01 Jun 2022 12:17:56 +0200
- Message-id: <165407867640.1200.4356310312163755395.reportbug@gawain.localnet>
Package: src:linux Version: 5.10.113-1 Severity: important Dear Maintainer, I've updated an older typewriter computer from Stretch to Buster and from there to Bullseye. The kernel linux-image-4.19.0-20-amd64 from Buster works. This one is used at the moment for reportbug! But anything from the newer versions hangs during boot. I've tried the release kernel of Bullseye, the security-updated linux-image-5.10.0-14-amd64, the newest one from backports and the latest version from testing, which has been a 5.17 version. I've tried to start up with boot option boot_delay=1000, but then it already hangs/crashes after the line of loading the initial ramdisk. Can only switch off/on the computer afterwards. Num-lock switch is dead. Without the boot_delay option, there is some fast kernel output and I've filmed with my camera. Between working and crashing kernel there is some difference in the SATA ports. And these are the last lines of output before the screen becomes black and there isn't any reaction of the computer any longer. This is a working boot with the Buster-kernel: [ 1.800181] hub 7-0:1.0: USB hub found [ 1.800226] hub 7-0:1.0: 2 ports detected [ 1.816820] scsi host1: ahci [ 1.817122] scsi host3: ahci [ 1.817395] scsi host4: ahci [ 1.817663] scsi host5: ahci [ 1.817939] scsi host6: ahci [ 1.818297] scsi host7: ahci [ 1.818430] ata3: SATA max UDMA/133 abar m2048@0xf01a6000 port 0xf01a6100 irq 25 [ 1.818489] ata4: SATA max UDMA/133 abar m2048@0xf01a6000 port 0xf01a6180 irq 25 [ 1.818547] ata5: DUMMY [ 1.818582] ata6: DUMMY [ 1.818618] ata7: SATA max UDMA/133 abar m2048@0xf01a6000 port 0xf01a6300 irq 25 [ 1.818678] ata8: SATA max UDMA/133 abar m2048@0xf01a6000 port 0xf01a6380 irq 25 [ 1.819353] scsi host2: ata_generic [ 1.819448] ata1: PATA max UDMA/100 cmd 0x1218 ctl 0x1240 bmdma 0x1200 irq 18 [ 1.819494] ata2: PATA max UDMA/100 cmd 0x1220 ctl 0x1244 bmdma 0x1208 irq 18 [ 1.879056] pci 0000:00:00.0: Intel Q35 Chipset [ 1.879122] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 1.879855] pci 0000:00:00.0: detected 8192K stolen memory [ 1.879947] [drm] Replacing VGA console driver [ 1.880476] Console: switching to colour dummy device 80x25 [ 1.880940] [drm] ACPI BIOS requests an excessive sleep of 1124034056 ms, using 1500 ms instead [ 1.884726] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.884730] [drm] Driver supports precise vblank timestamp query. With Bullseye-kernel I can't see the line for scsi hosts 1 and 3. But maybe the order is differently and it is not viewable before the screen becomes black. So maybe also a problem with console switching and i915 graphic? I'll upload the video to opened bug report. I hope you can help me?! Do you know some boot options for the kernel I could try to get the newer kernels to work? br Markus -- Package-specific info: ** Kernel log: boot messages should be attached ** Model information sys_vendor: Hewlett-Packard product_name: HP Compaq dc7800p Small Form Factor product_version: chassis_vendor: Hewlett-Packard chassis_version: bios_vendor: Hewlett-Packard bios_version: 786F1 v01.35 board_vendor: Hewlett-Packard board_name: 0AA8h board_version: ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82Q35 Express DRAM Controller [8086:29b0] (rev 02) Subsystem: Hewlett-Packard Company 82Q35 Express DRAM Controller [103c:2818] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:02.0 VGA compatible controller [0300]: Intel Corporation 82Q35 Express Integrated Graphics Controller [8086:29b2] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company 82Q35 Express Integrated Graphics Controller [103c:2818] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f0100000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 1210 [size=8] Region 2: Memory at e0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at f0000000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at 000c0000 [virtual] [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:03.0 Communication controller [0780]: Intel Corporation 82Q35 Express MEI Controller [8086:29b4] (rev 02) Subsystem: Hewlett-Packard Company 82Q35 Express MEI Controller [103c:2818] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 5 Region 0: Memory at f01a7100 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel modules: mei_me 00:03.2 IDE interface [0101]: Intel Corporation 82Q35 Express PT IDER Controller [8086:29b6] (rev 02) (prog-if 85 [PCI native mode-only controller, supports bus mastering]) Subsystem: Hewlett-Packard Company 82Q35 Express PT IDER Controller [103c:2818] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: I/O ports at 1218 [size=8] Region 1: I/O ports at 1240 [size=4] Region 2: I/O ports at 1220 [size=8] Region 3: I/O ports at 1244 [size=4] Region 4: I/O ports at 1200 [size=16] Capabilities: <access denied> Kernel driver in use: ata_generic Kernel modules: ata_generic 00:03.3 Serial controller [0700]: Intel Corporation 82Q35 Express Serial KT Controller [8086:29b7] (rev 02) (prog-if 02 [16550]) Subsystem: Hewlett-Packard Company 82Q35 Express Serial KT Controller [103c:2818] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 1228 [size=8] Region 1: Memory at f01a4000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: serial 00:19.0 Ethernet controller [0200]: Intel Corporation 82566DM-2 Gigabit Network Connection [8086:10bd] (rev 02) Subsystem: Hewlett-Packard Company 82566DM-2 Gigabit Network Connection [103c:2818] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 26 Region 0: Memory at f0180000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at f01a5000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at 1100 [disabled] [size=32] Capabilities: <access denied> Kernel driver in use: e1000e Kernel modules: e1000e 00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company 82801I (ICH9 Family) USB UHCI Controller [103c:2818] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 1120 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company 82801I (ICH9 Family) USB UHCI Controller [103c:2818] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 1140 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company 82801I (ICH9 Family) USB UHCI Controller [103c:2818] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at 1160 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company 82801I (ICH9 Family) USB2 EHCI Controller [103c:2818] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 0: Memory at f01a6800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02) Subsystem: Hewlett-Packard Company 82801I (ICH9 Family) HD Audio Controller [103c:2818] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 24 Region 0: Memory at f01a0000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=20, subordinate=20, sec-latency=0 I/O behind bridge: 00002000-00002fff [size=4K] Memory behind bridge: f8000000-f81fffff [size=2M] Prefetchable memory behind bridge: 00000000f8200000-00000000f83fffff [size=2M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 21 Bus: primary=00, secondary=30, subordinate=30, sec-latency=0 I/O behind bridge: 00003000-00003fff [size=4K] Memory behind bridge: f8400000-f85fffff [size=2M] Prefetchable memory behind bridge: 00000000f8600000-00000000f87fffff [size=2M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company 82801I (ICH9 Family) USB UHCI Controller [103c:2818] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 1180 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company 82801I (ICH9 Family) USB UHCI Controller [103c:2818] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 11a0 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company 82801I (ICH9 Family) USB2 EHCI Controller [103c:2818] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at f01a6c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=32 I/O behind bridge: [disabled] Memory behind bridge: [disabled] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801IO (ICH9DO) LPC Interface Controller [8086:2914] (rev 02) Subsystem: Hewlett-Packard Company 82801IO (ICH9DO) LPC Interface Controller [103c:2818] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] [8086:2922] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] [103c:2818] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 25 Region 0: I/O ports at 1230 [size=8] Region 1: I/O ports at 1248 [size=4] Region 2: I/O ports at 1238 [size=8] Region 3: I/O ports at 124c [size=4] Region 4: I/O ports at 11c0 [size=32] Region 5: Memory at f01a6000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci ** USB devices: Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 045e:00cb Microsoft Corp. Basic Optical Mouse v2.0 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 11.3 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 'stable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.19.0-20-amd64 (SMP w/2 CPU threads) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-5.10.0-14-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.140 ii kmod 28-1 ii linux-base 4.6 Versions of packages linux-image-5.10.0-14-amd64 recommends: pn apparmor <none> pn firmware-linux-free <none> Versions of packages linux-image-5.10.0-14-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.04-20 pn linux-doc-5.10 <none> Versions of packages linux-image-5.10.0-14-amd64 is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> ii firmware-misc-nonfree 20210315-3 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
--- End Message ---
--- Begin Message ---
- To: 1012306-done@bugs.debian.org
- Subject: Re: Bug#1012210: linux-image-5.10.0-14-amd64: Kernels of Bullseye and Testing (5.10 and 5.17) hang at boot
- From: Diederik de Haas <didi.debian@cknow.org>
- Date: Mon, 05 Dec 2022 19:03:07 +0100
- Message-id: <3405942.QJadu78ljV@bagend>
- In-reply-to: <1818403.tdWV9SEqCh@bagend>
On 03 Jun 2022 13:05:09 +0200 Diederik de Haas <didi.debian@cknow.org> wrote: > Please clarify whether that is correct or not. Also provide more info about > YOUR boot failure and sent that to the NEW bug number that you should > receive. No response in 6 months; closing.Attachment: signature.asc
Description: This is a digitally signed message part.
--- End Message ---