--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: crda: Wrong country selected for wlan regulatory domain (sometimes)
- From: Touko Korpela <touko.korpela@iki.fi>
- Date: Sun, 11 Aug 2013 01:28:56 +0300
- Message-id: <20130810222856.4943.13258.reportbug@lisko>
Package: crda
Version: 1.1.2-1
Severity: normal
Dear Maintainer,
for some reason cdra or kernel puts wireless adapter to wrong country mode
(TW). I use NetworkManager for managing networking in this laptop. I have
configured to log automatically in primary WPA2 network. When I select other
WPA2 network, TW setting is used instead of correct (FI). Or maybe bug
is in brcmsmac driver, that seem to still have bugs in recent kernels.
Here is part of kernel log for wireless messages. dmesg is attached
[ 16.866871] brcmsmac bcma0:0: firmware: agent loaded brcm/bcm43xx-0.fw
into memory
[ 16.867574] brcmsmac bcma0:0: firmware: agent loaded
brcm/bcm43xx_hdr-0.fw into memory
[ 16.914905] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled:
false (implement)
[ 16.914919] brcmsmac bcma0:0: brcms_ops_config: change power-save mode:
false (implement)
[ 16.915160] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.747307] wlan0: authenticate with 00:26:5a:b5:31:89
[ 18.747869] wlan0: send auth to 00:26:5a:b5:31:89 (try 1/3)
[ 18.750588] wlan0: authenticated
[ 18.754399] wlan0: associate with 00:26:5a:b5:31:89 (try 1/3)
[ 18.757628] wlan0: RX AssocResp from 00:26:5a:b5:31:89 (capab=0x431
status=0 aid=2)
[ 18.758159] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed:
associated
[ 18.758173] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled:
true (implement)
[ 18.758199] wlan0: associated
[ 18.761284] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 21.965195] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering:
1 addresses (implement)
[ 90.515552] wlan0: deauthenticating from 00:26:5a:b5:31:89 by local
choice (reason=3)
[ 90.517215] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed:
disassociated
[ 90.517243] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering:
1 addresses (implement)
[ 90.517253] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled:
false (implement)
[ 90.519379] cfg80211: Calling CRDA to update world regulatory domain
[ 90.535976] cfg80211: World regulatory domain updated:
[ 90.535989] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 90.535995] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300
mBi, 2000 mBm)
[ 90.536000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300
mBi, 2000 mBm)
[ 90.536005] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300
mBi, 2000 mBm)
[ 90.536009] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300
mBi, 2000 mBm)
[ 90.536014] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300
mBi, 2000 mBm)
[ 90.536293] cfg80211: Calling CRDA for country: FI
[ 90.549405] cfg80211: Regulatory domain changed to country: FI
[ 90.549417] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 90.549423] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A,
2000 mBm)
[ 90.549427] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A,
2000 mBm)
[ 90.549432] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A,
2000 mBm)
[ 90.549436] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A,
2700 mBm)
[ 90.549441] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz),
(N/A, 4000 mBm)
[ 91.597040] wlan0: authenticate with 00:1e:ab:03:2c:59
[ 91.599367] wlan0: send auth to 00:1e:ab:03:2c:59 (try 1/3)
[ 91.607010] wlan0: authenticated
[ 91.611447] wlan0: associate with 00:1e:ab:03:2c:59 (try 1/3)
[ 91.614218] wlan0: RX AssocResp from 00:1e:ab:03:2c:59 (capab=0x411
status=0 aid=1)
[ 91.614669] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed:
associated
[ 91.614678] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled:
true (implement)
[ 91.614702] wlan0: associated
[ 91.615569] cfg80211: Calling CRDA for country: TW
[ 91.628792] cfg80211: Regulatory domain changed to country: TW
[ 91.628803] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 91.628810] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300
mBi, 2700 mBm)
[ 91.628815] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300
mBi, 1700 mBm)
[ 91.628820] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300
mBi, 3000 mBm)
[ 92.626513] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering:
1 addresses (implement)
[ 109.708920] wlan0: deauthenticating from 00:1e:ab:03:2c:59 by local
choice (reason=3)
[ 109.710535] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed:
disassociated
[ 109.710562] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering:
1 addresses (implement)
[ 109.710573] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled:
false (implement)
[ 109.712459] cfg80211: Calling CRDA to update world regulatory domain
[ 109.728064] cfg80211: World regulatory domain updated:
[ 109.728076] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 109.728082] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300
mBi, 2000 mBm)
[ 109.728088] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300
mBi, 2000 mBm)
[ 109.728093] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300
mBi, 2000 mBm)
[ 109.728097] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300
mBi, 2000 mBm)
[ 109.728102] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300
mBi, 2000 mBm)
[ 109.728151] cfg80211: Calling CRDA for country: FI
[ 109.740907] cfg80211: Regulatory domain changed to country: FI
[ 109.740920] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 109.740926] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A,
2000 mBm)
[ 109.740931] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A,
2000 mBm)
[ 109.740936] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A,
2000 mBm)
[ 109.740940] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A,
2700 mBm)
[ 109.740945] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz),
(N/A, 4000 mBm)
-- System Information:
Debian Release: 7.1
APT prefers stable-updates
APT policy: (900, 'stable-updates'), (900, 'stable'), (700, 'testing'), (600, 'unstable'), (500, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.10-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages crda depends on:
ii libc6 2.13-38
ii libnl-3-200 3.2.7-4
ii libnl-genl-3-200 3.2.7-4
ii libssl1.0.0 1.0.1e-2
ii wireless-regdb 2013.02.13-1
Versions of packages crda recommends:
ii iw 3.4-1
crda suggests no packages.
-- Configuration Files:
/etc/default/crda changed:
REGDOMAIN=FI
-- no debconf information
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-6) ) #1 SMP Debian 3.10.5-1 (2013-08-07)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.10-2-amd64 root=/dev/mapper/LISKO_VG-rootlv ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a7b50fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a7b51000-0x00000000a7ba1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000a7ba2000-0x00000000a7cd5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a7cd6000-0x00000000a7ce6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000a7ce7000-0x00000000a7d0afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a7d0b000-0x00000000a7d0bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a7d0c000-0x00000000a7d0cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000a7d0d000-0x00000000a7d0ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a7d10000-0x00000000a7d15fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000a7d16000-0x00000000a7d1cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a7d1d000-0x00000000a7d23fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000a7d24000-0x00000000a7d4afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a7d4b000-0x00000000a7d8dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000a7d8e000-0x00000000a7efffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000013effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: ASUSTeK Computer INC. 1215B/1215B, BIOS 0503 11/30/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x13f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0A7F00000 mask FFFF00000 uncachable
[ 0.000000] 2 base 0A8000000 mask FF8000000 uncachable
[ 0.000000] 3 base 0B0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000013f000000 aka 5104M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xa7f00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xa7f00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcd10-0x000fcd1f] mapped at [ffff8800000fcd10]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x0186e000, 0x0186efff] PGTABLE
[ 0.000000] BRK [0x0186f000, 0x0186ffff] PGTABLE
[ 0.000000] BRK [0x01870000, 0x01870fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13ee00000-0x13effffff]
[ 0.000000] [mem 0x13ee00000-0x13effffff] page 2M
[ 0.000000] BRK [0x01871000, 0x01871fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13edfffff]
[ 0.000000] [mem 0x13c000000-0x13edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100001000-0x13bffffff]
[ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
[ 0.000000] [mem 0x100200000-0x13bffffff] page 2M
[ 0.000000] BRK [0x01872000, 0x01872fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xa7b50fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xa79fffff] page 2M
[ 0.000000] [mem 0xa7a00000-0xa7b50fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xa7d0b000-0xa7d0bfff]
[ 0.000000] [mem 0xa7d0b000-0xa7d0bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xa7d0d000-0xa7d0ffff]
[ 0.000000] [mem 0xa7d0d000-0xa7d0ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xa7d8e000-0xa7efffff]
[ 0.000000] [mem 0xa7d8e000-0xa7efffff] page 4k
[ 0.000000] RAMDISK: [mem 0x3666e000-0x3732efff]
[ 0.000000] ACPI: RSDP 00000000000f0430 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000a7b94070 0005C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Bug: Warning: Incorrect checksum in table [XSDT] - 0x89, should be 0xF3 (20130328/tbutils-324)
[ 0.000000] ACPI: FACP 00000000a7b9c6e0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130328/tbfadt-603)
[ 0.000000] ACPI: DSDT 00000000a7b94158 08581 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000a7d23f80 00040
[ 0.000000] ACPI: APIC 00000000a7b9c7d8 00062 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 00000000a7b9c840 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: SLIC 00000000a7b9c880 00176 (v00 _ASUS_ Notebook 00000000 00000000)
[ 0.000000] ACPI: HPET 00000000a7b9c9f8 00038 (v01 ALASKA A M I 01072009 AMI 00000004)
[ 0.000000] ACPI: SSDT 00000000a7b9ca30 00406 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000a7b9ce38 0168E (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13effffff]
[ 0.000000] NODE_DATA [mem 0x13eff8000-0x13effbfff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013ac00000-ffff88013dffffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xa7b50fff]
[ 0.000000] node 0: [mem 0xa7d0b000-0xa7d0bfff]
[ 0.000000] node 0: [mem 0xa7d0d000-0xa7d0ffff]
[ 0.000000] node 0: [mem 0xa7d8e000-0xa7efffff]
[ 0.000000] node 0: [mem 0x100001000-0x13effffff]
[ 0.000000] On node 0 totalpages: 945251
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9341 pages used for memmap
[ 0.000000] DMA32 zone: 683207 pages, LIFO batch:31
[ 0.000000] Normal zone: 3528 pages used for memmap
[ 0.000000] Normal zone: 258047 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000a7b51000 - 00000000a7ba2000
[ 0.000000] PM: Registered nosave memory: 00000000a7ba2000 - 00000000a7cd6000
[ 0.000000] PM: Registered nosave memory: 00000000a7cd6000 - 00000000a7ce7000
[ 0.000000] PM: Registered nosave memory: 00000000a7ce7000 - 00000000a7d0b000
[ 0.000000] PM: Registered nosave memory: 00000000a7d0c000 - 00000000a7d0d000
[ 0.000000] PM: Registered nosave memory: 00000000a7d10000 - 00000000a7d16000
[ 0.000000] PM: Registered nosave memory: 00000000a7d16000 - 00000000a7d1d000
[ 0.000000] PM: Registered nosave memory: 00000000a7d1d000 - 00000000a7d24000
[ 0.000000] PM: Registered nosave memory: 00000000a7d24000 - 00000000a7d4b000
[ 0.000000] PM: Registered nosave memory: 00000000a7d4b000 - 00000000a7d8e000
[ 0.000000] PM: Registered nosave memory: 00000000a7f00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
[ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
[ 0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
[ 0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
[ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
[ 0.000000] e820: [mem 0xa7f00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013ec00000 s85184 r8192 d21312 u1048576
[ 0.000000] pcpu-alloc: s85184 r8192 d21312 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 932305
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.10-2-amd64 root=/dev/mapper/LISKO_VG-rootlv ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3639400k/5226496k available (3651k kernel code, 1445492k absent, 141604k reserved, 3118k data, 920k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 1600.061 MHz processor
[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.12 BogoMIPS (lpj=6400244)
[ 0.000012] pid_max: default: 32768 minimum: 301
[ 0.000088] Security Framework initialized
[ 0.000097] AppArmor: AppArmor disabled by boot time parameter
[ 0.000101] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.000667] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003421] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004725] Mount-cache hash table entries: 256
[ 0.005114] Initializing cgroup subsys memory
[ 0.005150] Initializing cgroup subsys devices
[ 0.005155] Initializing cgroup subsys freezer
[ 0.005159] Initializing cgroup subsys net_cls
[ 0.005164] Initializing cgroup subsys blkio
[ 0.005167] Initializing cgroup subsys perf_event
[ 0.005229] tseg: 00a7f00000
[ 0.005235] CPU: Physical Processor ID: 0
[ 0.005237] CPU: Processor Core ID: 0
[ 0.005241] mce: CPU supports 6 MCE banks
[ 0.005261] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.005261] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.005261] tlb_flushall_shift: 5
[ 0.005417] Freeing SMP alternatives: 12k freed
[ 0.006227] ACPI: Core revision 20130328
[ 0.016165] ACPI: All ACPI Tables successfully acquired
[ 0.169399] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.209093] smpboot: CPU0: AMD E-350 Processor (fam: 14, model: 01, stepping: 00)
[ 0.316517] Performance Events: AMD PMU driver.
[ 0.316528] ... version: 0
[ 0.316531] ... bit width: 48
[ 0.316533] ... generic registers: 4
[ 0.316536] ... value mask: 0000ffffffffffff
[ 0.316539] ... max period: 00007fffffffffff
[ 0.316541] ... fixed-purpose events: 0
[ 0.316544] ... event mask: 000000000000000f
[ 0.317017] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.317261] smpboot: Booting Node 0, Processors #1 OK
[ 0.330493] Brought up 2 CPUs
[ 0.330498] smpboot: Total of 2 processors activated (6400.24 BogoMIPS)
[ 0.332987] devtmpfs: initialized
[ 0.340286] PM: Registering ACPI NVS region [mem 0xa7b51000-0xa7ba1fff] (331776 bytes)
[ 0.340320] PM: Registering ACPI NVS region [mem 0xa7cd6000-0xa7ce6fff] (69632 bytes)
[ 0.340328] PM: Registering ACPI NVS region [mem 0xa7d0c000-0xa7d0cfff] (4096 bytes)
[ 0.340333] PM: Registering ACPI NVS region [mem 0xa7d10000-0xa7d15fff] (24576 bytes)
[ 0.340340] PM: Registering ACPI NVS region [mem 0xa7d1d000-0xa7d23fff] (28672 bytes)
[ 0.340346] PM: Registering ACPI NVS region [mem 0xa7d4b000-0xa7d8dfff] (274432 bytes)
[ 0.340813] regulator-dummy: no parameters
[ 0.340996] NET: Registered protocol family 16
[ 0.341330] ACPI: bus type PCI registered
[ 0.341336] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.341454] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.341460] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.372930] PCI: Using configuration type 1 for base access
[ 0.374695] bio: create slab <bio-0> at 0
[ 0.375027] ACPI: Added _OSI(Module Device)
[ 0.375034] ACPI: Added _OSI(Processor Device)
[ 0.375038] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.375042] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.376993] ACPI: EC: Look up EC in DSDT
[ 0.379176] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.395729] ACPI: Interpreter enabled
[ 0.395753] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
[ 0.395763] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
[ 0.395796] ACPI: (supports S0 S3 S4 S5)
[ 0.395801] ACPI: Using IOAPIC for interrupt routing
[ 0.396234] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.396529] ACPI: No dock devices found.
[ 0.413899] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.414510] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff])
[ 0.414829] PCI host bridge to bus 0000:00
[ 0.414837] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.414843] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.414848] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.414853] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.414858] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.414875] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[ 0.415073] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
[ 0.415090] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 0.415101] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
[ 0.415112] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
[ 0.415176] pci 0000:00:01.0: supports D1 D2
[ 0.415339] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
[ 0.415354] pci 0000:00:01.1: reg 10: [mem 0xfeb44000-0xfeb47fff]
[ 0.415429] pci 0000:00:01.1: supports D1 D2
[ 0.415614] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
[ 0.415695] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.415970] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.415998] pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
[ 0.416013] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
[ 0.416028] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
[ 0.416043] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
[ 0.416058] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
[ 0.416073] pci 0000:00:11.0: reg 24: [mem 0xfeb4c000-0xfeb4c3ff]
[ 0.416337] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.416357] pci 0000:00:12.0: reg 10: [mem 0xfeb4b000-0xfeb4bfff]
[ 0.416487] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.416596] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.416625] pci 0000:00:12.2: reg 10: [mem 0xfeb4a000-0xfeb4a0ff]
[ 0.416736] pci 0000:00:12.2: supports D1 D2
[ 0.416740] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.416808] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.416961] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.416982] pci 0000:00:13.0: reg 10: [mem 0xfeb49000-0xfeb49fff]
[ 0.417116] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.417200] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.417228] pci 0000:00:13.2: reg 10: [mem 0xfeb48000-0xfeb480ff]
[ 0.417339] pci 0000:00:13.2: supports D1 D2
[ 0.417343] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.417417] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.417503] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.417680] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.417711] pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
[ 0.417801] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.417846] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.417922] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.418104] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.418195] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.418353] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.418462] pci 0000:00:15.0: supports D1 D2
[ 0.418558] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.418645] pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
[ 0.418753] pci 0000:00:15.2: supports D1 D2
[ 0.418860] pci 0000:00:15.2: System wakeup disabled by ACPI
[ 0.419016] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[ 0.419219] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[ 0.419415] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[ 0.419613] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[ 0.419826] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[ 0.420025] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[ 0.420219] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[ 0.420412] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[ 0.420801] pci 0000:01:00.0: [14e4:4727] type 00 class 0x028000
[ 0.420829] pci 0000:01:00.0: reg 10: [mem 0xfea00000-0xfea03fff 64bit]
[ 0.420957] pci 0000:01:00.0: supports D1 D2
[ 0.420962] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.428815] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.428834] pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.429052] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.429068] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.429075] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.429081] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.429086] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.429194] pci 0000:00:15.0: PCI bridge to [bus 03-05]
[ 0.429204] pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
[ 0.429211] pci 0000:00:15.0: bridge window [mem 0xfdf00000-0xfe8fffff]
[ 0.429221] pci 0000:00:15.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.429367] pci 0000:06:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.429413] pci 0000:06:00.0: reg 10: [mem 0xfe900000-0xfe907fff 64bit]
[ 0.429623] pci 0000:06:00.0: PME# supported from D3hot D3cold
[ 0.436820] pci 0000:00:15.2: PCI bridge to [bus 06]
[ 0.436841] pci 0000:00:15.2: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.436897] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.436902] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.437848] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.438017] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.438189] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.438370] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[ 0.438514] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[ 0.438631] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[ 0.438748] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[ 0.438866] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[ 0.439289] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.439303] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.439402] Found 1 acpi root devices
[ 0.439503] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.439994] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.440012] vgaarb: loaded
[ 0.440015] vgaarb: bridge control possible 0000:00:01.0
[ 0.440152] PCI: Using ACPI for IRQ routing
[ 0.451029] PCI: pci_cache_line_size set to 64 bytes
[ 0.451184] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.451190] e820: reserve RAM buffer [mem 0xa7b51000-0xa7ffffff]
[ 0.451194] e820: reserve RAM buffer [mem 0xa7d0c000-0xa7ffffff]
[ 0.451199] e820: reserve RAM buffer [mem 0xa7d10000-0xa7ffffff]
[ 0.451203] e820: reserve RAM buffer [mem 0xa7f00000-0xa7ffffff]
[ 0.451207] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
[ 0.451467] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.451476] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.453506] Switching to clocksource hpet
[ 0.457153] pnp: PnP ACPI init
[ 0.457190] ACPI: bus type PNP registered
[ 0.457482] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.457491] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.458749] system 00:01: [io 0x040b] has been reserved
[ 0.458756] system 00:01: [io 0x04d6] has been reserved
[ 0.458761] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.458767] system 00:01: [io 0x0c14] has been reserved
[ 0.458772] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.458777] system 00:01: [io 0x0c52] has been reserved
[ 0.458782] system 00:01: [io 0x0c6c] has been reserved
[ 0.458787] system 00:01: [io 0x0c6f] has been reserved
[ 0.458792] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.458797] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.458802] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.458807] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.458812] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.458817] system 00:01: [io 0x0800-0x089f] has been reserved
[ 0.458822] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.458827] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.458833] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.458838] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.458845] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.458851] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.458856] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.458863] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.458868] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.458874] system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.458879] system 00:01: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.458886] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.459096] pnp 00:02: Plug and Play ACPI device, IDs SYN0a13 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.459206] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.459245] pnp 00:04: [dma 4]
[ 0.459292] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.459437] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.459500] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.460014] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.460020] system 00:07: [io 0x040b] has been reserved
[ 0.460025] system 00:07: [io 0x04d6] has been reserved
[ 0.460031] system 00:07: [io 0x0c00-0x0c01] has been reserved
[ 0.460036] system 00:07: [io 0x0c14] has been reserved
[ 0.460041] system 00:07: [io 0x0c50-0x0c51] has been reserved
[ 0.460046] system 00:07: [io 0x0c52] has been reserved
[ 0.460051] system 00:07: [io 0x0c6c] has been reserved
[ 0.460056] system 00:07: [io 0x0c6f] has been reserved
[ 0.460061] system 00:07: [io 0x0cd0-0x0cd1] has been reserved
[ 0.460066] system 00:07: [io 0x0cd2-0x0cd3] has been reserved
[ 0.460071] system 00:07: [io 0x0cd4-0x0cd5] has been reserved
[ 0.460076] system 00:07: [io 0x0cd6-0x0cd7] has been reserved
[ 0.460081] system 00:07: [io 0x0cd8-0x0cdf] has been reserved
[ 0.460087] system 00:07: [io 0x0b00-0x0b3f] could not be reserved
[ 0.460092] system 00:07: [io 0x0800-0x089f] has been reserved
[ 0.460097] system 00:07: [io 0x0b00-0x0b0f] has been reserved
[ 0.460102] system 00:07: [io 0x0b20-0x0b3f] has been reserved
[ 0.460107] system 00:07: [io 0x0900-0x090f] has been reserved
[ 0.460112] system 00:07: [io 0x0910-0x091f] has been reserved
[ 0.460118] system 00:07: [io 0xfe00-0xfefe] has been reserved
[ 0.460125] system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.460130] system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.460136] system 00:07: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.460142] system 00:07: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.460148] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.460218] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.460313] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.460735] system 00:0a: [mem 0xa8000000-0xbfffffff] has been reserved
[ 0.460742] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.461215] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.461230] pnp: PnP ACPI: found 12 devices
[ 0.461233] ACPI: bus type PNP unregistered
[ 0.477408] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.477422] pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.477433] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.477452] pci 0000:00:15.0: PCI bridge to [bus 03-05]
[ 0.477459] pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
[ 0.477467] pci 0000:00:15.0: bridge window [mem 0xfdf00000-0xfe8fffff]
[ 0.477476] pci 0000:00:15.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.477486] pci 0000:00:15.2: PCI bridge to [bus 06]
[ 0.477495] pci 0000:00:15.2: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.478083] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.478088] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.478093] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.478097] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff]
[ 0.478102] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.478107] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.478112] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.478116] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.478120] pci_bus 0000:02: resource 7 [mem 0xc0000000-0xffffffff]
[ 0.478124] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.478128] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe8fffff]
[ 0.478133] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.478138] pci_bus 0000:06: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.478261] NET: Registered protocol family 2
[ 0.478736] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.479059] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.479347] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.479455] TCP: reno registered
[ 0.479483] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.479546] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.480016] NET: Registered protocol family 1
[ 0.480052] pci 0000:00:01.0: Boot video device
[ 1.186725] PCI: CLS 64 bytes, default 64
[ 1.186840] Unpacking initramfs...
[ 1.692141] Freeing initrd memory: 13060k freed
[ 1.700232] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.700245] software IO TLB [mem 0xa3b51000-0xa7b51000] (64MB) mapped at [ffff8800a3b51000-ffff8800a7b50fff]
[ 1.700681] LVT offset 0 assigned for vector 0x400
[ 1.700758] perf: AMD IBS detected (0x000000ff)
[ 1.701679] audit: initializing netlink socket (disabled)
[ 1.701709] type=2000 audit(1376171173.448:1): initialized
[ 1.728376] bounce pool size: 64 pages
[ 1.728391] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.730143] VFS: Disk quotas dquot_6.5.2
[ 1.730269] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.730526] msgmni has been set to 7133
[ 1.731205] alg: No test for stdrng (krng)
[ 1.731305] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.731422] io scheduler noop registered
[ 1.731427] io scheduler deadline registered
[ 1.731453] io scheduler cfq registered (default)
[ 1.731903] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.731938] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.732153] GHES: HEST is not enabled!
[ 1.732474] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.734912] Linux agpgart interface v0.103
[ 1.735185] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.752914] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.752934] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.753583] mousedev: PS/2 mouse device common for all mice
[ 1.753704] rtc_cmos 00:05: RTC can wake from S4
[ 1.754294] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.754339] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.754362] cpuidle: using governor ladder
[ 1.754365] cpuidle: using governor menu
[ 1.754462] drop_monitor: Initializing network drop monitor service
[ 1.754592] TCP: cubic registered
[ 1.754768] NET: Registered protocol family 10
[ 1.755267] mip6: Mobile IPv6
[ 1.755273] NET: Registered protocol family 17
[ 1.756812] PM: Hibernation image not present or could not be loaded.
[ 1.756856] registered taskstats version 1
[ 1.758298] rtc_cmos 00:05: setting system clock to 2013-08-10 21:46:13 UTC (1376171173)
[ 1.760615] Freeing unused kernel memory: 920k freed
[ 1.761117] Write protecting the kernel read-only data: 6144k
[ 1.764191] Freeing unused kernel memory: 436k freed
[ 1.767507] Freeing unused kernel memory: 488k freed
[ 1.774663] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.940661] udevd[60]: starting version 175
[ 2.017583] SCSI subsystem initialized
[ 2.024396] ACPI: bus type ATA registered
[ 2.024641] ACPI: bus type USB registered
[ 2.024705] usbcore: registered new interface driver usbfs
[ 2.024733] usbcore: registered new interface driver hub
[ 2.039793] usbcore: registered new device driver usb
[ 2.040676] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.041053] ehci-pci: EHCI PCI platform driver
[ 2.041326] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.041466] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 2.041482] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.041502] QUIRK: Enable AMD PLL fix
[ 2.041507] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.041526] ehci-pci 0000:00:12.2: debug port 1
[ 2.042116] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4a000
[ 2.043243] libata version 3.00 loaded.
[ 2.053783] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.053850] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.053856] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.053861] usb usb1: Product: EHCI Host Controller
[ 2.053865] usb usb1: Manufacturer: Linux 3.10-2-amd64 ehci_hcd
[ 2.053870] usb usb1: SerialNumber: 0000:00:12.2
[ 2.054164] hub 1-0:1.0: USB hub found
[ 2.054177] hub 1-0:1.0: 5 ports detected
[ 2.054959] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.054973] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
[ 2.055036] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4b000
[ 2.084294] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.084304] ACPI: Thermal Zone [TZ00] (70 C)
[ 2.113888] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.113898] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.113904] usb usb2: Product: OHCI Host Controller
[ 2.113908] usb usb2: Manufacturer: Linux 3.10-2-amd64 ohci_hcd
[ 2.113913] usb usb2: SerialNumber: 0000:00:12.0
[ 2.114240] hub 2-0:1.0: USB hub found
[ 2.114266] hub 2-0:1.0: 5 ports detected
[ 2.114716] ahci 0000:00:11.0: version 3.0
[ 2.115008] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 2.115016] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.119173] scsi0 : ahci
[ 2.119422] ata1: SATA max UDMA/133 abar m1024@0xfeb4c000 port 0xfeb4c100 irq 19
[ 2.119829] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 2.119845] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 2.119859] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.119878] ehci-pci 0000:00:13.2: debug port 1
[ 2.119937] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb48000
[ 2.129788] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.129882] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.129889] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.129894] usb usb3: Product: EHCI Host Controller
[ 2.129898] usb usb3: Manufacturer: Linux 3.10-2-amd64 ehci_hcd
[ 2.129902] usb usb3: SerialNumber: 0000:00:13.2
[ 2.130176] hub 3-0:1.0: USB hub found
[ 2.130189] hub 3-0:1.0: 5 ports detected
[ 2.131330] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.131348] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 2.131392] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb49000
[ 2.151005] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 2.151025] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
[ 2.165210] microcode: CPU0: patch_level=0x05000028
[ 2.165286] platform microcode: firmware: agent loaded amd-ucode/microcode_amd.bin into memory
[ 2.165323] microcode: CPU1: patch_level=0x05000028
[ 2.165547] xhci_hcd 0000:06:00.0: irq 40 for MSI/MSI-X
[ 2.165560] xhci_hcd 0000:06:00.0: irq 41 for MSI/MSI-X
[ 2.165572] xhci_hcd 0000:06:00.0: irq 42 for MSI/MSI-X
[ 2.165782] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.165788] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.165793] usb usb5: Product: xHCI Host Controller
[ 2.165797] usb usb5: Manufacturer: Linux 3.10-2-amd64 xhci_hcd
[ 2.165801] usb usb5: SerialNumber: 0000:06:00.0
[ 2.165969] xHCI xhci_add_endpoint called for root hub
[ 2.165973] xHCI xhci_check_bandwidth called for root hub
[ 2.166049] hub 5-0:1.0: USB hub found
[ 2.166066] hub 5-0:1.0: 2 ports detected
[ 2.166271] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 2.166281] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
[ 2.166332] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.166337] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.166341] usb usb6: Product: xHCI Host Controller
[ 2.166345] usb usb6: Manufacturer: Linux 3.10-2-amd64 xhci_hcd
[ 2.166349] usb usb6: SerialNumber: 0000:06:00.0
[ 2.166490] xHCI xhci_add_endpoint called for root hub
[ 2.166494] xHCI xhci_check_bandwidth called for root hub
[ 2.166555] hub 6-0:1.0: USB hub found
[ 2.166569] hub 6-0:1.0: 2 ports detected
[ 2.166787] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.189783] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.189793] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.189798] usb usb4: Product: OHCI Host Controller
[ 2.189803] usb usb4: Manufacturer: Linux 3.10-2-amd64 ohci_hcd
[ 2.189807] usb usb4: SerialNumber: 0000:00:13.0
[ 2.190098] hub 4-0:1.0: USB hub found
[ 2.190114] hub 4-0:1.0: 5 ports detected
[ 2.441878] usb 3-2: new high-speed USB device number 2 using ehci-pci
[ 2.576532] usb 3-2: New USB device found, idVendor=058f, idProduct=6366
[ 2.576547] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.576552] usb 3-2: Product: Mass Storage Device
[ 2.576556] usb 3-2: Manufacturer: Generic
[ 2.576560] usb 3-2: SerialNumber: 058F63666433
[ 2.583635] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 2.584403] scsi1 : usb-storage 3-2:1.0
[ 2.584589] usbcore: registered new interface driver usb-storage
[ 2.609877] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.612983] ata1.00: ATA-8: SAMSUNG 470 Series SSD, AXM09B1Q, max UDMA/133
[ 2.612992] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.614980] ata1.00: configured for UDMA/133
[ 2.615635] scsi 0:0:0:0: Direct-Access ATA SAMSUNG 470 Seri AXM0 PQ: 0 ANSI: 5
[ 2.624234] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 2.624425] sd 0:0:0:0: [sda] Write Protect is off
[ 2.624432] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.624687] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.626291] sda: sda1 sda2 sda3
[ 2.627869] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.633025] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.689758] usb 3-4: new high-speed USB device number 3 using ehci-pci
[ 2.697675] tsc: Refined TSC clocksource calibration: 1600.016 MHz
[ 2.697690] Switching to clocksource tsc
[ 2.762655] device-mapper: uevent: version 1.0.3
[ 2.762802] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[ 2.909244] usb 3-4: New USB device found, idVendor=13d3, idProduct=5711
[ 2.909258] usb 3-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.909263] usb 3-4: Product: USB 2.0 UVC VGA WebCam
[ 2.909267] usb 3-4: Manufacturer: Azurewave
[ 2.909271] usb 3-4: SerialNumber: 0x0001
[ 3.712155] scsi 1:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0
[ 3.712954] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.526567] sd 1:0:0:0: [sdb] 31512576 512-byte logical blocks: (16.1 GB/15.0 GiB)
[ 4.527819] sd 1:0:0:0: [sdb] Write Protect is off
[ 4.527840] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 4.530080] sd 1:0:0:0: [sdb] No Caching mode page present
[ 4.530098] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[ 4.538816] sd 1:0:0:0: [sdb] No Caching mode page present
[ 4.538835] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[ 4.540815] sdb: sdb1 sdb2
[ 4.545600] sd 1:0:0:0: [sdb] No Caching mode page present
[ 4.545632] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[ 4.545641] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 6.227209] bio: create slab <bio-1> at 1
[ 6.421469] bio: create slab <bio-1> at 1
[ 6.782652] PM: Starting manual resume from disk
[ 6.782664] PM: Hibernation image partition 254:2 present
[ 6.782666] PM: Looking for hibernation image.
[ 6.783667] PM: Image not found (code -22)
[ 6.783675] PM: Hibernation image not present or could not be loaded.
[ 6.805846] EXT4-fs (dm-1): barriers disabled
[ 6.807518] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.522071] udevd[451]: starting version 175
[ 7.711496] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 7.711512] ACPI: Power Button [PWRB]
[ 7.711666] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 7.712609] wmi: Mapper loaded
[ 7.716595] ACPI: acpi_idle registered with cpuidle
[ 7.727575] ACPI: Lid Switch [LID]
[ 7.727778] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 7.727790] ACPI: Sleep Button [SLPB]
[ 7.727918] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 7.727925] ACPI: Power Button [PWRF]
[ 7.750012] acpi device:44: registered as cooling_device2
[ 7.750053] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 7.750178] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 7.750466] ACPI: AC Adapter [AC0] (on-line)
[ 7.844165] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[ 7.844194] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[ 7.844214] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[ 7.844250] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[ 7.857833] bcma: bus0: Bus registered
[ 7.858521] ACPI: Battery Slot [BAT0] (battery present)
[ 7.923734] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SMRG 1 (20130328/utaddress-251)
[ 7.923750] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.954215] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 7.968415] [drm] Initialized drm 1.1.0 20060810
[ 7.975614] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 7.975726] sp5100_tco: PCI Revision ID: 0x42
[ 7.975846] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 7.975860] sp5100_tco: Last reboot was not triggered by watchdog.
[ 7.975968] sp5100_tco: initialized (0xffffc9000064eb00). heartbeat=60 sec (nowayout=0)
[ 8.061022] kvm: Nested Virtualization enabled
[ 8.061035] kvm: Nested Paging enabled
[ 8.106316] acpi-cpufreq: overriding BIOS provided _PSD data
[ 8.106031] asus_wmi: ASUS WMI generic driver loaded
[ 8.127213] asus_wmi: Initialization: 0x0asus_wmi: BIOS WMI version: 0.9
[ 8.127592] asus_wmi: SFUN value: 0x0<7>[ 8.128739] snd_hda_intel 0000:00:01.1: irq 43 for MSI/MSI-X
[ 8.133752] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
[ 8.137950] [drm] radeon kernel modesetting enabled.
[ 8.145269] asus_wmi: Backlight controlled by ACPI video driver
[ 8.160290] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
[ 8.195073] cfg80211: Calling CRDA to update world regulatory domain
[ 8.210202] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[ 8.210519] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 8.229939] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1043:0x84A5).
[ 8.230010] [drm] register mmio base: 0xFEB00000
[ 8.230014] [drm] register mmio size: 262144
[ 8.230209] ATOM BIOS: AMD
[ 8.230293] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[ 8.230299] radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF
[ 8.230311] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[ 8.230315] [drm] Detected VRAM RAM=384M, BAR=256M
[ 8.230318] [drm] RAM width 32bits DDR
[ 8.234564] [TTM] Zone kernel: Available graphics memory: 1827158 kiB
[ 8.234571] [TTM] Initializing pool allocator
[ 8.234581] [TTM] Initializing DMA pool allocator
[ 8.234634] [drm] radeon: 384M of VRAM memory ready
[ 8.234639] [drm] radeon: 512M of GTT memory ready.
[ 8.261017] platform radeon_uvd.0: firmware: agent loaded radeon/SUMO_uvd.bin into memory
[ 8.261143] radeon 0000:00:01.0: ffff880136375000 unpin not necessary
[ 8.284579] media: Linux media interface: v0.10
[ 8.309920] Linux video capture interface: v2.00
[ 8.315972] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 16
[ 8.361963] uvcvideo: Found UVC 1.00 device USB 2.0 UVC VGA WebCam (13d3:5711)
[ 8.367799] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8.383076] input: USB 2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:13.2/usb3/3-4/3-4:1.0/input/input11
[ 8.383264] usbcore: registered new interface driver uvcvideo
[ 8.383268] USB Video Class driver (1.1.1)
[ 8.491034] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90010973118
[ 8.491053] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 8.497693] [drm] Loading PALM Microcode
[ 8.507686] platform radeon_cp.0: firmware: agent loaded radeon/PALM_pfp.bin into memory
[ 8.516007] platform radeon_cp.0: firmware: agent loaded radeon/PALM_me.bin into memory
[ 8.522901] platform radeon_cp.0: firmware: agent loaded radeon/SUMO_rlc.bin into memory
[ 8.532206] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 8.532486] radeon 0000:00:01.0: WB enabled
[ 8.532495] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff880138773c00
[ 8.532501] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffff880138773c0c
[ 8.535283] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000174118 and cpu addr 0xffffc900114b2118
[ 8.535319] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.535322] [drm] Driver supports precise vblank timestamp query.
[ 8.535368] radeon 0000:00:01.0: irq 44 for MSI/MSI-X
[ 8.535397] radeon 0000:00:01.0: radeon: using MSI.
[ 8.535461] [drm] radeon: irq initialized.
[ 8.553039] [drm] ring test on 0 succeeded in 1 usecs
[ 8.553108] [drm] ring test on 3 succeeded in 1 usecs
[ 8.554888] cfg80211: World regulatory domain updated:
[ 8.554900] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.554905] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.554908] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.554912] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8.554916] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.554919] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.555154] cfg80211: Calling CRDA for country: US
[ 8.603224] cfg80211: Regulatory domain changed to country: US
[ 8.603234] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.603239] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.603243] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 8.603247] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.603251] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.603255] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.603258] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 8.603261] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 8.603649] cfg80211: Calling CRDA for country: FI
[ 8.609126] [drm] ring test on 5 succeeded in 1 usecs
[ 8.609137] [drm] UVD initialized successfully.
[ 8.630530] [drm] ib test on ring 0 succeeded in 0 usecs
[ 8.630567] [drm] ib test on ring 3 succeeded in 0 usecs
[ 8.655339] [drm] ib test on ring 5 succeeded
[ 8.677375] cfg80211: Regulatory domain changed to country: FI
[ 8.677386] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.677391] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 8.677395] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 8.677398] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 8.677402] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 8.677405] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 8.748934] [drm] radeon atom DIG backlight initialized
[ 8.748953] [drm] Radeon Display Connectors
[ 8.748959] [drm] Connector 0:
[ 8.748968] [drm] LVDS-1
[ 8.748973] [drm] HPD1
[ 8.748983] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 8.748988] [drm] Encoders:
[ 8.748993] [drm] LCD1: INTERNAL_UNIPHY
[ 8.748999] [drm] Connector 1:
[ 8.749004] [drm] HDMI-A-1
[ 8.749009] [drm] HPD2
[ 8.749017] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 8.749021] [drm] Encoders:
[ 8.749026] [drm] DFP1: INTERNAL_UNIPHY
[ 8.749030] [drm] Connector 2:
[ 8.749036] [drm] VGA-1
[ 8.749044] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 8.749048] [drm] Encoders:
[ 8.749053] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 8.749164] [drm] Internal thermal controller without fan control
[ 8.749375] [drm] radeon: power management initialized
[ 9.183007] [drm] fb mappable at 0xC0375000
[ 9.183020] [drm] vram apper at 0xC0000000
[ 9.183025] [drm] size 4325376
[ 9.183031] [drm] fb depth is 24
[ 9.183036] [drm] pitch is 5632
[ 9.183645] fbcon: radeondrmfb (fb0) is primary device
[ 9.296463] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0400, board id: 3655, fw id: 650187
[ 9.368833] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[ 9.747717] Console: switching to colour frame buffer device 170x48
[ 9.754524] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 9.754529] radeon 0000:00:01.0: registered panic notifier
[ 9.754558] [drm] Initialized radeon 2.33.0 20080528 for 0000:00:01.0 on minor 0
[ 10.625937] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 10.810465] EXT4-fs (dm-1): re-mounted. Opts: commit=60,errors=remount-ro
[ 11.184326] loop: module loaded
[ 12.472821] Adding 974844k swap on /dev/mapper/LISKO_VG-swap--1. Priority:-1 extents:1 across:974844k SS
[ 12.887368] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 12.897142] EXT4-fs (dm-3): mounted filesystem without journal. Opts: commit=60
[ 12.901574] EXT4-fs (sda3): mounted filesystem without journal. Opts: commit=60
[ 14.419127] RPC: Registered named UNIX socket transport module.
[ 14.419137] RPC: Registered udp transport module.
[ 14.419140] RPC: Registered tcp transport module.
[ 14.419143] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 14.442019] FS-Cache: Loaded
[ 14.445299] Key type dns_resolver registered
[ 14.476340] FS-Cache: Netfs 'nfs' registered for caching
[ 14.516599] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 14.852804] fuse init (API version 7.22)
[ 16.422682] Bluetooth: Core ver 2.16
[ 16.422728] NET: Registered protocol family 31
[ 16.422732] Bluetooth: HCI device and connection manager initialized
[ 16.422751] Bluetooth: HCI socket layer initialized
[ 16.422757] Bluetooth: L2CAP socket layer initialized
[ 16.422771] Bluetooth: SCO socket layer initialized
[ 16.452391] Bluetooth: RFCOMM TTY layer initialized
[ 16.452426] Bluetooth: RFCOMM socket layer initialized
[ 16.452431] Bluetooth: RFCOMM ver 1.11
[ 16.459065] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.459067] Bluetooth: BNEP filters: protocol multicast
[ 16.459085] Bluetooth: BNEP socket layer initialized
[ 16.760576] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[ 16.866871] brcmsmac bcma0:0: firmware: agent loaded brcm/bcm43xx-0.fw into memory
[ 16.867574] brcmsmac bcma0:0: firmware: agent loaded brcm/bcm43xx_hdr-0.fw into memory
[ 16.914905] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 16.914919] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[ 16.915160] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.747307] wlan0: authenticate with 00:26:5a:b5:31:89
[ 18.747869] wlan0: send auth to 00:26:5a:b5:31:89 (try 1/3)
[ 18.750588] wlan0: authenticated
[ 18.754399] wlan0: associate with 00:26:5a:b5:31:89 (try 1/3)
[ 18.757628] wlan0: RX AssocResp from 00:26:5a:b5:31:89 (capab=0x431 status=0 aid=2)
[ 18.758159] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 18.758173] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 18.758199] wlan0: associated
[ 18.761284] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 21.965195] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[ 90.515552] wlan0: deauthenticating from 00:26:5a:b5:31:89 by local choice (reason=3)
[ 90.517215] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[ 90.517243] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[ 90.517253] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 90.519379] cfg80211: Calling CRDA to update world regulatory domain
[ 90.535976] cfg80211: World regulatory domain updated:
[ 90.535989] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 90.535995] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 90.536000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 90.536005] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 90.536009] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 90.536014] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 90.536293] cfg80211: Calling CRDA for country: FI
[ 90.549405] cfg80211: Regulatory domain changed to country: FI
[ 90.549417] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 90.549423] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 90.549427] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 90.549432] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 90.549436] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 90.549441] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 91.597040] wlan0: authenticate with 00:1e:ab:03:2c:59
[ 91.599367] wlan0: send auth to 00:1e:ab:03:2c:59 (try 1/3)
[ 91.607010] wlan0: authenticated
[ 91.611447] wlan0: associate with 00:1e:ab:03:2c:59 (try 1/3)
[ 91.614218] wlan0: RX AssocResp from 00:1e:ab:03:2c:59 (capab=0x411 status=0 aid=1)
[ 91.614669] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 91.614678] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 91.614702] wlan0: associated
[ 91.615569] cfg80211: Calling CRDA for country: TW
[ 91.628792] cfg80211: Regulatory domain changed to country: TW
[ 91.628803] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 91.628810] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 91.628815] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 91.628820] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 92.626513] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[ 109.708920] wlan0: deauthenticating from 00:1e:ab:03:2c:59 by local choice (reason=3)
[ 109.710535] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[ 109.710562] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[ 109.710573] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 109.712459] cfg80211: Calling CRDA to update world regulatory domain
[ 109.728064] cfg80211: World regulatory domain updated:
[ 109.728076] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 109.728082] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 109.728088] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 109.728093] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 109.728097] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 109.728102] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 109.728151] cfg80211: Calling CRDA for country: FI
[ 109.740907] cfg80211: Regulatory domain changed to country: FI
[ 109.740920] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 109.740926] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 109.740931] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 109.740936] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 109.740940] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 109.740945] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 111.049107] wlan0: authenticate with 00:26:5a:b5:31:89
[ 111.051680] wlan0: send auth to 00:26:5a:b5:31:89 (try 1/3)
[ 111.055694] wlan0: authenticated
[ 111.059793] wlan0: associate with 00:26:5a:b5:31:89 (try 1/3)
[ 111.063127] wlan0: RX AssocResp from 00:26:5a:b5:31:89 (capab=0x431 status=0 aid=2)
[ 111.063894] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 111.063908] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 111.063940] wlan0: associated
[ 111.164578] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[ 2217.969940] brcmsmac bcma0:0: phyerr 0x20, rate 0xa
--- End Message ---