--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.2.0-4-amd64: synaptics trackpad does not function with 3.2.46-1
- From: milo <privacytech@tormail.net>
- Date: Tue, 18 Jun 2013 12:49:39 -0500
- Message-id: <20130618174939.7335.26934.reportbug@calypso>
Package: src:linux
Version: 3.2.41-2+deb7u2
Severity: important
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
Upgrading to testing from stable and unstable stopped trackpad from all functioning. This has been tested on multiple Lenovo Thinkpads including W530 and x230. Behavior is easily reproducible.
* What exactly did you do (or not do) that was effective (or
ineffective)?
After upgrade, trackpad stopped. Downgraded to unstable. Synaptics trackpad functions again.
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these lines ***
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-15) ) #1 SMP Debian 3.2.41-2
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 boot=local volgroup=crypto root=/dev/crypto/root rootfs=reiserfs bootdev=/dev/sdb1 bootdevfs=ext2 loopdev=/dev/loop5 gpghome=stuff key=laptop offset=8192 cryptodev=/dev/sda2 cipher=AES256 ro
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 44.307060] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 44.567060] cfg80211: World regulatory domain updated:
[ 44.567109] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 44.567174] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 44.567236] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 44.567296] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 44.567357] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 44.567417] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 44.661748] hda_codec: CX20590: BIOS auto-probing.
[ 44.663239] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 46.728506] Adding 16777212k swap on /dev/mapper/crypto-swap. Priority:-1 extents:1 across:16777212k
[ 46.750963] reiserfs: enabling write barrier flush mode
[ 47.160403] fuse init (API version 7.17)
[ 47.788693] REISERFS (device dm-2): found reiserfs format "3.6" with standard journal
[ 47.794430] REISERFS (device dm-2): using ordered data mode
[ 47.800138] reiserfs: using flush barriers
[ 47.820112] REISERFS (device dm-2): journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 47.824642] REISERFS (device dm-2): checking transaction log (dm-2)
[ 47.910840] REISERFS (device dm-2): Using r5 hash to sort names
[ 50.009695] RPC: Registered named UNIX socket transport module.
[ 50.015695] RPC: Registered udp transport module.
[ 50.021645] RPC: Registered tcp transport module.
[ 50.027540] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 50.118620] FS-Cache: Loaded
[ 50.162676] FS-Cache: Netfs 'nfs' registered for caching
[ 50.190867] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 51.346526] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 51.685230] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input11
[ 51.781169] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 51.979533] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 52.243473] vboxdrv: Found 8 processor cores.
[ 52.243681] vboxdrv: fAsync=0 offMin=0xf2 offMax=0x99a8
[ 52.245330] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 52.246954] vboxdrv: Successfully loaded version 4.2.10_Debian (interface 0x001a0004).
[ 52.596070] vboxpci: IOMMU not found (not registered)
[ 59.769153] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 59.770760] Bluetooth: BNEP filters: protocol multicast
[ 60.090426] Bluetooth: RFCOMM TTY layer initialized
[ 60.091826] Bluetooth: RFCOMM socket layer initialized
[ 60.093252] Bluetooth: RFCOMM ver 1.11
[ 60.358343] bbswitch: version 0.7
[ 60.359881] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.VID_
[ 60.361452] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG_.VID_
[ 60.363481] bbswitch: detected an Optimus _DSM function
[ 60.365347] pci 0000:01:00.0: power state changed by ACPI to D0
[ 60.366822] pci 0000:01:00.0: power state changed by ACPI to D0
[ 60.368104] pci 0000:01:00.0: enabling device (0000 -> 0003)
[ 60.369395] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 60.372522] bbswitch: disabling discrete graphics
[ 60.391332] thinkpad_acpi: EC reports that Thermal Table has changed
[ 60.507184] pci 0000:01:00.0: power state changed by ACPI to D3
[ 61.550643] lp: driver loaded but no devices found
[ 61.747919] ppdev: user-space parallel port driver
[ 67.347443] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 67.403029] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 67.407815] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 67.422376] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 67.427229] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 67.720306] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 67.722830] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 67.832874] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 74.767722] wlan1: authenticate with 00:21:29:d2:3e:e7 (try 1)
[ 74.770628] wlan1: authenticated
[ 74.770951] wlan1: waiting for beacon from 00:21:29:d2:3e:e7
[ 74.781109] wlan1: beacon received
[ 74.835465] wlan1: associate with 00:21:29:d2:3e:e7 (try 1)
[ 74.838155] wlan1: RX AssocResp from 00:21:29:d2:3e:e7 (capab=0x411 status=0 aid=4)
[ 74.838158] wlan1: associated
[ 74.841542] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 155.850272] REISERFS (device sdb2): found reiserfs format "3.6" with standard journal
[ 155.850291] REISERFS (device sdb2): using ordered data mode
[ 155.850292] reiserfs: using flush barriers
[ 155.851021] REISERFS (device sdb2): journal params: device sdb2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 155.851238] REISERFS (device sdb2): checking transaction log (sdb2)
[ 155.859522] EXT2-fs (sdb1): warning: mounting unchecked fs, running e2fsck is recommended
[ 155.873898] REISERFS (device sdb2): Using r5 hash to sort names
[ 195.472843] usb 3-1.4: USB disconnect, device number 5
[ 198.232680] usb 3-1.4: new full-speed USB device number 7 using ehci_hcd
[ 198.329276] usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[ 198.329280] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 198.329282] usb 3-1.4: Product: Broadcom Bluetooth Device
[ 198.329283] usb 3-1.4: Manufacturer: Broadcom Corp
[ 198.329284] usb 3-1.4: SerialNumber: CC52AF8206BB
[ 207.505512] usb 3-1.4: USB disconnect, device number 7
[ 263.067001] CPU4: Package power limit notification (total events = 1)
[ 263.067005] CPU6: Package power limit notification (total events = 1)
[ 263.067010] CPU3: Package power limit notification (total events = 1)
[ 263.067013] CPU7: Package power limit notification (total events = 1)
[ 263.067017] CPU1: Package power limit notification (total events = 1)
[ 263.067021] CPU5: Package power limit notification (total events = 1)
[ 263.067024] CPU0: Package power limit notification (total events = 1)
[ 263.067028] CPU2: Package power limit notification (total events = 1)
[ 263.087075] CPU1: Package power limit normal
[ 263.087079] CPU4: Package power limit normal
[ 263.087082] CPU3: Package power limit normal
[ 263.087085] CPU7: Package power limit normal
[ 263.087088] CPU0: Package power limit normal
[ 263.087091] CPU6: Package power limit normal
[ 263.087094] CPU5: Package power limit normal
[ 263.087097] CPU2: Package power limit normal
** Model information
sys_vendor: LENOVO
product_name: 427638U
product_version: ThinkPad W520
chassis_vendor: LENOVO
chassis_version: Not Available
bios_vendor: LENOVO
bios_version: 8BET61WW (1.41 )
board_vendor: LENOVO
board_name: 427638U
board_version: Not Available
** Loaded modules:
xt_multiport
parport_pc
ppdev
lp
parport
bbswitch(O)
cpufreq_powersave
rfcomm
cpufreq_stats
cpufreq_userspace
bnep
cpufreq_conservative
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
ip6table_filter
ip6_tables
iptable_filter
ip_tables
x_tables
binfmt_misc
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
fuse
snd_hda_codec_conexant
snd_hda_intel
snd_hda_codec
arc4
snd_hwdep
uvcvideo
snd_pcm_oss
videodev
snd_mixer_oss
snd_pcm
snd_page_alloc
joydev
v4l2_compat_ioctl32
media
thinkpad_acpi
nvram
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
iwlwifi
btusb
snd_seq
coretemp
i915
bluetooth
iTCO_wdt
drm_kms_helper
crc32c_intel
drm
ghash_clmulni_intel
mac80211
snd_seq_device
crc16
i2c_i801
aesni_intel
cfg80211
acpi_cpufreq
aes_x86_64
snd_timer
iTCO_vendor_support
i2c_algo_bit
snd
tpm_tis
tpm
psmouse
aes_generic
mperf
rfkill
tpm_bios
soundcore
i2c_core
ac
battery
cryptd
serio_raw
wmi
power_supply
pcspkr
processor
video
button
ata_generic
ata_piix
isofs
usbhid
hid
uhci_hcd
mptspi
mptscsih
mptbase
scsi_transport_spi
ext2
ext3
mbcache
jbd
reiserfs
generic
onenand
mtd
dm_mod
loop(O)
sg
sr_mod
sd_mod
cdrom
crc_t10dif
usb_storage
xhci_hcd
evdev
ahci
sdhci_pci
libahci
sdhci
mmc_core
libata
ehci_hcd
thermal
thermal_sys
scsi_mod
usbcore
usb_common
e1000e
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
Subsystem: Lenovo Device [17aa:21cf]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: f0000000-f10fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device [17aa:21d1]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 53
Region 0: Memory at f1400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 6000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Lenovo Device [17aa:21cf]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f3a25000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:16.3 Serial controller [0700]: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller [8086:1c3d] (rev 04) (prog-if 02 [16550])
Subsystem: Lenovo Device [17aa:21cf]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 60b0 [size=8]
Region 1: Memory at f3a2c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
Subsystem: Lenovo Device [17aa:21ce]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f3a00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f3a2b000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 6080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:21cf]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f3a2a000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04)
Subsystem: Lenovo Device [17aa:21cf]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 55
Region 0: Memory at f3a20000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: bfa00000-bfbfffff
Prefetchable memory behind bridge: 00000000bfc00000-00000000bfdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f3900000-f39fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f3100000-f38fffff
Prefetchable memory behind bridge: 00000000f1800000-00000000f1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f2900000-f30fffff
Prefetchable memory behind bridge: 00000000f2000000-00000000f27fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.6 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 [8086:1c1c] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=0
Memory behind bridge: f2800000-f28fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:21cf]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f3a29000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation QM67 Express Chipset Family LPC Controller [8086:1c4f] (rev 04)
Subsystem: Lenovo Device [17aa:21cf]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device [17aa:21cf]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 52
Region 0: I/O ports at 60a8 [size=8]
Region 1: I/O ports at 60bc [size=4]
Region 2: I/O ports at 60a0 [size=8]
Region 3: I/O ports at 60b8 [size=4]
Region 4: I/O ports at 6060 [size=32]
Region 5: Memory at f3a28000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04)
Subsystem: Lenovo Device [17aa:21cf]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f3a24000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108GLM [Quadro 1000M] [10de:0dfa] (rev ff) (prog-if ff)
!!! Unknown header type 7f
03:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] [8086:0085] (rev 34)
Subsystem: Intel Corporation Centrino Advanced-N 6205 AGN [8086:1311]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 54
Region 0: Memory at f3900000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
0d:00.0 System peripheral [0880]: Ricoh Co Ltd MMC/SD Host Controller [1180:e822] (rev 08) (prog-if 01)
Subsystem: Lenovo Device [17aa:21cf]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f2900000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
0e:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) (prog-if 30 [XHCI])
Subsystem: Lenovo Device [17aa:21cf]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f2800000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 003: ID 0718:049a Imation Corp.
Bus 003 Device 004: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor
Bus 003 Device 006: ID 04f2:b217 Chicony Electronics Co., Ltd Lenovo Integrated Camera (0.3MP)
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.2.0-4-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.50
ii initramfs-tools [linux-initramfs-tool] 0.112
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-14
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.38
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
--- End Message ---