Bug#979340: nouveau: Suspend hangs for 5 minutes before completing
Package: src:linux
Version: 5.10.4-1
Severity: normal
X-Debbugs-Cc: mertdirik@gmail.com
Suspend to memory operation takes 5+ minutes long.
When suspend operation is invoked, display is turned off as expected, but the
power led and the fan noise indicates the machine isn't suspended. Machine
doesn't respond to keyboard or power button presses.
After 5 minutes or so the suspend is completed. Power led indicates machine is
in sleep, and pressing a keyboard button wakes it up as expected.
In the end suspend & resume is successful, but it takes an extremely long time
to suspend the computer. Resume operation is fast.
1. Method of invocation doesn't matter - echo mem > /sys/power/state, systemctl
suspend or Fn+F3)
2. Whether the X tty has been used or not *does* matter.
- Successive suspend operations are fast, but only if they're done from text
tty.
If I ever switch to X tty after boot or resume, then the following suspend
operation takes a long time.
After a resume, if the suspend was done in a text console and I invoke
another suspend *without ever switching to X console* the suspend operation is
quick.
3. If I boot with nouveau.noaccel=1 argument the bug is not encountered,
suspend is quick.
3. Kernel version and configuration: This is where it gets messy.
- Debian 4.19 kernel package doesn't have the bug. 5.9 and 5.10 certainly
has.
- I tried to track it back with old versions from snapshots.debian.org but
it got confusing quickly.
- Debian packages 5.5 and later is certainly affected. Debian 5.4 package
seemed to be working in my first try but it also showed the bug in a second
try.
4. I tried to bisect it with upstream kernels and it was even more confusing.
- Latest stable kernel was 5.10.3 at the time and it doesn't have the bug
(despite Debian 5.10.2-trunk and 5.10.4 showing it. Though I didn't try
upstream 5.10.4 yet I guess it'll work fine.
- Trying a bisection between upstream 5.10 and 4.19 proved to be
inconclusive because the interim builds give conflicting results. Despite doing
a bisection twice both ended up in very unrelated commits.
It isn't clear if it's an upstream bug, configuration bug, downstream patch,
maybe even a compiler difference? nouveau.debug= option also proved to be
useless as it prints megabytes of repetitive messages. I have no idea how else
to troubleshoot this issue.
Thanks
-- Package-specific info:
** Version:
Linux version 5.10.0-1-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-3) 10.2.1 20201224, GNU ld (GNU Binutils for Debian) 2.35.1) #1 SMP Debian 5.10.4-1 (2020-12-31)
** Command line:
BOOT_IMAGE=/vmlinuz-5.10.0-1-amd64 root=/dev/mapper/vg0-root ro debug
** Not tainted
** Kernel log:
[ 7.691048] usb 3-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 7.691232] usb 3-5: Product: Video WebCam
[ 7.691413] usb 3-5: Manufacturer: SuYin
[ 7.691700] usb 3-5: SerialNumber: CN0314-SN30-OV035-VA-R05.00.00
[ 7.713341] cryptd: max_cpu_qlen set to 1000
[ 7.813825] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 7.901271] mc: Linux media interface: v0.10
[ 7.937762] videodev: Linux video capture interface: v2.00
[ 7.963170] uvcvideo: Found UVC 1.00 device Video WebCam (064e:a103)
[ 7.996291] input: Video WebCam: Video WebCam as /devices/pci0000:00/0000:00:1d.7/usb3/3-5/3-5:1.0/input/input24
[ 7.996549] usbcore: registered new interface driver uvcvideo
[ 7.996735] USB Video Class driver (1.1.1)
[ 8.141862] Bluetooth: Core ver 2.22
[ 8.143101] NET: Registered protocol family 31
[ 8.143280] Bluetooth: HCI device and connection manager initialized
[ 8.143457] Bluetooth: HCI socket layer initialized
[ 8.143908] Bluetooth: L2CAP socket layer initialized
[ 8.144082] Bluetooth: SCO socket layer initialized
[ 8.175559] usbcore: registered new interface driver btusb
[ 8.363855] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
[ 8.364043] rt2800pci 0000:03:00.0: firmware: direct-loading firmware rt2860.bin
[ 8.364048] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.40
[ 8.628386] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.628392] Bluetooth: BNEP filters: protocol multicast
[ 8.628397] Bluetooth: BNEP socket layer initialized
[ 8.781830] random: crng init done
[ 8.781836] random: 4 urandom warning(s) missed due to ratelimiting
[ 9.925056] tg3 0000:02:00.0 enp2s0: Link is up at 100 Mbps, full duplex
[ 9.925063] tg3 0000:02:00.0 enp2s0: Flow control is on for TX and on for RX
[ 9.925077] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 12.364507] show_signal_msg: 8 callbacks suppressed
[ 12.364510] redshift-gtk[781]: segfault at c ip 00000000f5ad4ea4 sp 00000000ffecd46c error 4 in libgtk-3.so.0.2404.20[f585f000+398000]
[ 12.364521] Code: ff 83 c4 10 8b 44 24 1c 65 2b 05 14 00 00 00 75 08 83 c4 2c 5b 5e 5f 5d c3 e8 28 20 12 00 8d b4 26 00 00 00 00 90 8b 44 24 04 <8b> 40 0c 8b 40 08 c3 8d 74 26 00 90 56 53 e8 39 32 d9 ff 81 c3 1d
[ 15.669126] redshift-gtk[844]: segfault at c ip 00000000f5b28ea4 sp 00000000ff97ce8c error 4 in libgtk-3.so.0.2404.20[f58b3000+398000]
[ 15.669154] Code: ff 83 c4 10 8b 44 24 1c 65 2b 05 14 00 00 00 75 08 83 c4 2c 5b 5e 5f 5d c3 e8 28 20 12 00 8d b4 26 00 00 00 00 90 8b 44 24 04 <8b> 40 0c 8b 40 08 c3 8d 74 26 00 90 56 53 e8 39 32 d9 ff 81 c3 1d
[ 16.192652] redshift-gtk[857]: segfault at c ip 00000000f5addea4 sp 00000000ffaadfbc error 4 in libgtk-3.so.0.2404.20[f5868000+398000]
[ 16.192680] Code: ff 83 c4 10 8b 44 24 1c 65 2b 05 14 00 00 00 75 08 83 c4 2c 5b 5e 5f 5d c3 e8 28 20 12 00 8d b4 26 00 00 00 00 90 8b 44 24 04 <8b> 40 0c 8b 40 08 c3 8d 74 26 00 90 56 53 e8 39 32 d9 ff 81 c3 1d
[ 16.714029] redshift-gtk[868]: segfault at c ip 00000000f5abfea4 sp 00000000ff89ed8c error 4 in libgtk-3.so.0.2404.20[f584a000+398000]
[ 16.714059] Code: ff 83 c4 10 8b 44 24 1c 65 2b 05 14 00 00 00 75 08 83 c4 2c 5b 5e 5f 5d c3 e8 28 20 12 00 8d b4 26 00 00 00 00 90 8b 44 24 04 <8b> 40 0c 8b 40 08 c3 8d 74 26 00 90 56 53 e8 39 32 d9 ff 81 c3 1d
[ 17.239182] redshift-gtk[879]: segfault at c ip 00000000f5aa4ea4 sp 00000000ffd5f4fc error 4 in libgtk-3.so.0.2404.20[f582f000+398000]
[ 17.239221] Code: ff 83 c4 10 8b 44 24 1c 65 2b 05 14 00 00 00 75 08 83 c4 2c 5b 5e 5f 5d c3 e8 28 20 12 00 8d b4 26 00 00 00 00 90 8b 44 24 04 <8b> 40 0c 8b 40 08 c3 8d 74 26 00 90 56 53 e8 39 32 d9 ff 81 c3 1d
[ 17.765482] redshift-gtk[886]: segfault at c ip 00000000f5ad9ea4 sp 00000000ffb2ecbc error 4 in libgtk-3.so.0.2404.20[f5864000+398000]
[ 17.765510] Code: ff 83 c4 10 8b 44 24 1c 65 2b 05 14 00 00 00 75 08 83 c4 2c 5b 5e 5f 5d c3 e8 28 20 12 00 8d b4 26 00 00 00 00 90 8b 44 24 04 <8b> 40 0c 8b 40 08 c3 8d 74 26 00 90 56 53 e8 39 32 d9 ff 81 c3 1d
[ 33.558761] PM: suspend entry (deep)
[ 33.589219] Filesystems sync: 0.030 seconds
[ 33.589740] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s
[ 33.589745] (NULL device *): firmware: direct-loading firmware regulatory.db
[ 33.694490] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 33.696213] OOM killer disabled.
[ 33.696221] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 33.697616] printk: Suspending console(s) (use no_console_suspend to debug)
[ 33.714090] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 33.715343] sd 0:0:0:0: [sda] Stopping disk
[ 327.423351] ACPI: EC: interrupt blocked
[ 327.443319] ACPI: Preparing to enter system sleep state S3
[ 328.113025] ACPI: EC: event blocked
[ 328.113027] ACPI: EC: EC stopped
[ 328.113028] PM: Saving platform NVS memory
[ 328.113376] Disabling non-boot CPUs ...
[ 328.114756] smpboot: CPU 1 is now offline
[ 328.115505] ACPI: Low-level resume complete
[ 328.115505] ACPI: EC: EC started
[ 328.115505] PM: Restoring platform NVS memory
[ 328.126844] Enabling non-boot CPUs ...
[ 328.126937] x86: Booting SMP configuration:
[ 328.126939] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 328.286924] CPU1 is up
[ 328.292288] ACPI: Waking up from system sleep state S3
[ 328.428604] ACPI: EC: interrupt unblocked
[ 328.466453] ACPI: EC: event unblocked
[ 328.466531] usb usb2: root hub lost power or was reset
[ 328.467147] usb usb4: root hub lost power or was reset
[ 328.469629] tg3 0000:02:00.0 enp2s0: Link is down
[ 328.520364] usb usb5: root hub lost power or was reset
[ 328.520652] usb usb6: root hub lost power or was reset
[ 328.520938] usb usb7: root hub lost power or was reset
[ 328.521117] usb usb8: root hub lost power or was reset
[ 328.576017] sd 0:0:0:0: [sda] Starting disk
[ 328.837839] usb 3-5: reset high-speed USB device number 3 using ehci-pci
[ 328.887662] ata5: SATA link down (SStatus 0 SControl 300)
[ 328.888668] ata2: SATA link down (SStatus 0 SControl 300)
[ 328.899436] ata6: SATA link down (SStatus 4 SControl 300)
[ 328.900430] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 328.900761] ata1.00: supports DRM functions and may not be fully accessible
[ 328.904270] ata1.00: supports DRM functions and may not be fully accessible
[ 328.907203] ata1.00: configured for UDMA/133
[ 328.919147] ata1.00: Enabling discard_zeroes_data
[ 328.922029] usb 6-1: reset full-speed USB device number 2 using uhci_hcd
[ 328.925871] usb 2-2: reset full-speed USB device number 2 using uhci_hcd
[ 329.106892] OOM killer enabled.
[ 329.107111] Restarting tasks ... done.
[ 329.123780] video LNXVIDEO:00: Restoring backlight state
[ 329.732559] PM: suspend exit
[ 329.752821] psmouse serio2: synaptics: queried max coordinates: x [..5720], y [..4780]
[ 330.239644] tg3 0000:02:00.0 enp2s0: Link is up at 100 Mbps, full duplex
[ 330.240773] tg3 0000:02:00.0 enp2s0: Flow control is on for TX and on for RX
[ 736.154757] redshift-gtk[1030]: segfault at c ip 00000000f5af8ea4 sp 00000000ff82ccdc error 4 in libgtk-3.so.0.2404.20[f5883000+398000]
[ 736.154770] Code: ff 83 c4 10 8b 44 24 1c 65 2b 05 14 00 00 00 75 08 83 c4 2c 5b 5e 5f 5d c3 e8 28 20 12 00 8d b4 26 00 00 00 00 90 8b 44 24 04 <8b> 40 0c 8b 40 08 c3 8d 74 26 00 90 56 53 e8 39 32 d9 ff 81 c3 1d
[ 737.390221] snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 737.929846] systemd[1]: Found redundant job sys-devices-virtual-block-dm\x2d4.device/start, dropping from transaction.
** Model information
sys_vendor: Packard Bell
product_name: SJV50MV
product_version: 0100
chassis_vendor: Packard Bell
chassis_version: N/A
bios_vendor: Phoenix Technologies LTD
bios_version: V1.32a
board_vendor: Packard Bell
board_name: SJV50MV
board_version: Rev
** Loaded modules:
binfmt_misc
bnep
btusb
btrtl
btbcm
btintel
bluetooth
jitterentropy_rng
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
videobuf2_common
videodev
mc
ctr
drbg
aes_generic
crypto_simd
cryptd
glue_helper
ansi_cprng
ecdh_generic
ecc
libaes
hid_generic
usbhid
hid
xfs
libcrc32c
rt2800pci
rt2800mmio
rt2800lib
rt2x00pci
rt2x00mmio
rt2x00lib
mac80211
coretemp
kvm_intel
snd_hda_codec_conexant
at24
iTCO_wdt
intel_pmc_bxt
snd_hda_codec_hdmi
iTCO_vendor_support
kvm
snd_hda_codec_generic
ledtrig_audio
watchdog
snd_hda_intel
snd_intel_dspcfg
soundwire_intel
soundwire_generic_allocation
snd_soc_core
snd_compress
cfg80211
soundwire_cadence
irqbypass
snd_hda_codec
joydev
pcspkr
snd_hda_core
acer_wmi
sparse_keymap
wmi_bmof
snd_hwdep
i2c_i801
i2c_smbus
soundwire_bus
tg3
sg
uhci_hcd
ehci_pci
snd_pcm
libphy
snd_timer
ehci_hcd
eeprom_93cx6
ptp
rfkill
snd
libarc4
usbcore
soundcore
pps_core
lpc_ich
usb_common
battery
ac
acpi_cpufreq
fuse
configfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
dm_mod
sd_mod
t10_pi
crc_t10dif
crct10dif_generic
crct10dif_common
nouveau
mxm_wmi
i2c_algo_bit
drm_kms_helper
cec
ahci
libahci
ttm
drm
libata
psmouse
evdev
scsi_mod
serio_raw
wmi
video
button
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Acer Incorporated [ALI] Mobile 4 Series Chipset Memory Controller Hub [1025:0219]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port [8086:2a41] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff [size=4K]
Memory behind bridge: f0000000-f10fffff [size=17M]
Prefetchable memory behind bridge: 00000000ce000000-00000000dfffffff [size=288M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] 82801I (ICH9 Family) USB UHCI Controller [1025:0219]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 1800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] 82801I (ICH9 Family) USB UHCI Controller [1025:0219]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 4: I/O ports at 1820 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] 82801I (ICH9 Family) USB2 EHCI Controller [1025:0219]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 20
Region 0: Memory at f1504800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Acer Incorporated [ALI] 82801I (ICH9 Family) HD Audio Controller [1025:0219]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at f1500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff [size=4K]
Memory behind bridge: f1100000-f11fffff [size=1M]
Prefetchable memory behind bridge: 00000000c0000000-00000000c01fffff [size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 26
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00004000-00004fff [size=4K]
Memory behind bridge: f1200000-f12fffff [size=1M]
Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff [size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] 82801I (ICH9 Family) USB UHCI Controller [1025:0219]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1840 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] 82801I (ICH9 Family) USB UHCI Controller [1025:0219]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 1860 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] 82801I (ICH9 Family) USB UHCI Controller [1025:0219]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] 82801I (ICH9 Family) USB UHCI Controller [1025:0219]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 18
Region 4: I/O ports at 18a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] 82801I (ICH9 Family) USB2 EHCI Controller [1025:0219]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f1504c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
Subsystem: Acer Incorporated [ALI] ICH9M LPC Interface Controller [1025:0219]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Acer Incorporated [ALI] 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] [1025:0219]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 27
Region 0: I/O ports at 18f0 [size=8]
Region 1: I/O ports at 18e4 [size=4]
Region 2: I/O ports at 18e8 [size=8]
Region 3: I/O ports at 18e0 [size=4]
Region 4: I/O ports at 18c0 [size=32]
Region 5: Memory at f1504000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Subsystem: Acer Incorporated [ALI] 82801I (ICH9 Family) SMBus Controller [1025:0219]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at c0400000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c00 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT216M [GeForce GT 240M] [10de:0a34] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Acer Incorporated [ALI] GT216M [GeForce GT 240M] [1025:0219]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at ce000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at 2000 [size=128]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
Kernel modules: nouveau
01:00.1 Audio device [0403]: NVIDIA Corporation GT216 HDMI Audio Controller [10de:0be2] (rev a1)
Subsystem: Acer Incorporated [ALI] GT216 HDMI Audio Controller [1025:0219]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f1000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
02:00.0 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10)
Subsystem: Acer Incorporated [ALI] NetLink BCM5784M Gigabit Ethernet PCIe [1025:0207]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
Region 0: Memory at f1100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
03:00.0 Network controller [0280]: Ralink corp. RT2790 Wireless 802.11n 1T/2R PCIe [1814:0781]
Subsystem: Foxconn International, Inc. RT2790 Wireless 802.11n 1T/2R PCIe [105b:e002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f1200000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: rt2800pci
Kernel modules: rt2800pci
** USB devices:
Bus 003 Device 003: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314]
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 1d57:130f Xenta 2.4Ghz wireless optical mouse receiver
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0a5c:2151 Broadcom Corp. Bluetooth
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: bullseye/sid
APT prefers testing-debug
APT policy: (500, 'testing-debug'), (500, 'testing')
Architecture: i386 (x86_64)
Foreign Architectures: amd64
Kernel: Linux 5.10.0-1-amd64 (SMP w/2 CPU threads)
Locale: LANG=tr_TR.UTF-8, LC_CTYPE=tr_TR.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.10.0-1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.139
ii kmod 27+20200310-2
ii linux-base 4.6
Versions of packages linux-image-5.10.0-1-amd64 recommends:
ii apparmor 2.13.5-1+b2
ii firmware-linux-free 20200122-1
Versions of packages linux-image-5.10.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.04-11
pn linux-doc-5.10 <none>
Versions of packages linux-image-5.10.0-1-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20200918-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: