--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-4.4.0-0.bpo.1-amd64: screen blink/glitch on dual monitor setup
- From: suli <suliadi_computer_inc@yahoo.co.id>
- Date: Wed, 30 Mar 2016 16:59:05 +0700
- Message-id: <20160330095905.1669.33413.reportbug@dwc.vma.net>
Package: src:linux
Version: 4.4.6-1~bpo8+1
Severity: normal
Tags: upstream
Dear Maintainer,
* What led up to the situation?
- setup dual monitor on notebook with secondary monitor plugged into
DSUB/VGA port
- configure 2nd monitor to extend desktop
- move mouse pointer from one display to another rapidly
* What exactly did you do (or not do) that was effective (or
ineffective)?
- just boot normally, then desktop showed up, moving my mouse across
monitor and there I noticed it
* What was the outcome of this action?
- there is glitch on some part of screen (blinking), on both display
* What outcome did you expect instead?
- no blinking, no glitch
But now I revert to linux-image-4.3.0-0.bpo.1-amd64 and the problem is gone.
-- Package-specific info:
** Version:
Linux version 4.4.0-0.bpo.1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.4.6-1~bpo8+1 (2016-03-20)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.4.0-0.bpo.1-amd64 root=UUID=0c275924-c64a-4700-89dc-d0401c85e576 ro initrd=/install/gtk/initrd.gz quiet splash acpi_osi=Linux
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 9.899415] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 9.899587] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 9.963318] ACPI: Battery Slot [BAT0] (battery present)
[ 10.010158] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[ 10.010167] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.010170] ACPI Warning: SystemIO range 0x00000000000011C0-0x00000000000011CF conflicts with OpRegion 0x0000000000001180-0x00000000000011E3 (\GPIO) (20150930/utaddress-254)
[ 10.010175] ACPI Warning: SystemIO range 0x00000000000011C0-0x00000000000011CF conflicts with OpRegion 0x0000000000001180-0x00000000000011DF (\_SB_.PCI0.LPCB.EC0_.GPIO) (20150930/utaddress-254)
[ 10.010179] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.010180] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011E3 (\GPIO) (20150930/utaddress-254)
[ 10.010184] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011DF (\_SB_.PCI0.LPCB.EC0_.GPIO) (20150930/utaddress-254)
[ 10.010187] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.010188] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011E3 (\GPIO) (20150930/utaddress-254)
[ 10.010192] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011DF (\_SB_.PCI0.LPCB.EC0_.GPIO) (20150930/utaddress-254)
[ 10.010195] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.010196] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 10.089493] ACPI Warning: SystemIO range 0x0000000000001840-0x000000000000185F conflicts with OpRegion 0x0000000000001840-0x000000000000184F (\_SB_.PCI0.SBUS.SMBI) (20150930/utaddress-254)
[ 10.089502] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.123423] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 10.489738] systemd-journald[205]: Received request to flush runtime journal from PID 1
[ 10.742218] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 10.869222] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272X: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 10.869226] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.869228] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 10.869230] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 10.869232] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 10.869234] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 10.869236] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 11.008359] psmouse serio1: synaptics: queried max coordinates: x [..5576], y [..4880]
[ 11.051700] iTCO_vendor_support: vendor-support=0
[ 11.060042] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 11.060093] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[ 11.060211] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.132944] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04773/0xa40000/0xa0400/0x0, board id: 0, fw id: 641896
[ 11.186426] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 11.186820] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 11.187034] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 11.187144] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 11.207915] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 11.942566] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 11.942582] acer_wmi: Function bitmap for Communication Button: 0x1
[ 11.950358] input: Acer WMI hotkeys as /devices/virtual/input/input13
[ 11.950734] input: Acer BMA150 accelerometer as /devices/virtual/input/input14
[ 12.077407] Adding 4290556k swap on /dev/sda6. Priority:-1 extents:1 across:4290556k FS
[ 12.579331] media: Linux media interface: v0.10
[ 12.597791] Linux video capture interface: v2.00
[ 12.699587] uvcvideo: Found UVC 1.00 device 1.3M WebCam (064e:a219)
[ 12.709330] input: 1.3M WebCam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input15
[ 12.709414] usbcore: registered new interface driver uvcvideo
[ 12.709416] USB Video Class driver (1.1.1)
[ 12.845931] cfg80211: World regulatory domain updated:
[ 12.845935] cfg80211: DFS Master region: unset
[ 12.845937] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 12.845939] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 12.845941] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 12.845943] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 12.845945] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 12.845948] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 12.845950] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 12.845951] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 12.845953] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 12.951194] ath: EEPROM regdomain: 0x65
[ 12.951197] ath: EEPROM indicates we should expect a direct regpair map
[ 12.951200] ath: Country alpha2 being used: 00
[ 12.951201] ath: Regpair used: 0x65
[ 12.983140] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 12.983425] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc90001240000, irq=17
[ 14.465613] RPC: Registered named UNIX socket transport module.
[ 14.465621] RPC: Registered udp transport module.
[ 14.465624] RPC: Registered tcp transport module.
[ 14.465627] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 14.500228] FS-Cache: Loaded
[ 14.555990] FS-Cache: Netfs 'nfs' registered for caching
[ 14.599431] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 17.063258] vboxdrv: Found 4 processor cores.
[ 17.064021] vboxdrv: fAsync=0 offMin=0x26f offMax=0x1cb9
[ 17.064151] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 17.064153] vboxdrv: Successfully loaded version 4.3.32_Debian (interface 0x001a000b).
[ 17.184869] vboxpci: IOMMU not found (not registered)
[ 22.071774] tg3 0000:02:00.0 eth0: Link is down
[ 23.432455] wlan0: authenticate with c4:e9:84:81:59:0e
[ 23.451664] wlan0: send auth to c4:e9:84:81:59:0e (try 1/3)
[ 23.454297] wlan0: authenticated
[ 23.454551] ath9k 0000:04:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 23.454554] ath9k 0000:04:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 23.454879] wlan0: associate with c4:e9:84:81:59:0e (try 1/3)
[ 23.458308] wlan0: RX AssocResp from c4:e9:84:81:59:0e (capab=0x431 status=0 aid=4)
[ 23.458412] wlan0: associated
[ 49.509763] [drm:ironlake_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
[ 49.510646] [drm:ironlake_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
[ 68.033496] [drm:ironlake_irq_handler [i915]] *ERROR* CPU pipe B FIFO underrun
[ 68.033858] [drm:ironlake_irq_handler [i915]] *ERROR* PCH transcoder B FIFO underrun
[ 348.375403] Bluetooth: Core ver 2.21
[ 348.375427] NET: Registered protocol family 31
[ 348.375429] Bluetooth: HCI device and connection manager initialized
[ 348.375433] Bluetooth: HCI socket layer initialized
[ 348.375436] Bluetooth: L2CAP socket layer initialized
[ 348.375443] Bluetooth: SCO socket layer initialized
[ 348.533034] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 348.533039] Bluetooth: BNEP filters: protocol multicast
[ 348.533045] Bluetooth: BNEP socket layer initialized
** Model information
sys_vendor: Acer
product_name: Aspire 4741
product_version: V1.12
chassis_vendor: Acer
chassis_version: V1.12
bios_vendor: Phoenix Technologies LTD
bios_version: V1.12
board_vendor: Acer
board_name: Aspire 4741
board_version: V1.12
** Loaded modules:
bnep
bluetooth
sha256_ssse3
sha256_generic
hmac
drbg
ansi_cprng
ctr
ccm
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
grace
fscache
sunrpc
arc4
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
videobuf2_core
v4l2_common
videodev
media
ath9k
ath9k_common
ath9k_hw
ath
mac80211
cfg80211
joydev
acer_wmi
intel_powerclamp
snd_hda_codec_hdmi
iTCO_wdt
iTCO_vendor_support
sparse_keymap
rfkill
snd_hda_codec_realtek
coretemp
kvm_intel
snd_hda_codec_generic
snd_hda_intel
snd_hda_codec
snd_hda_core
kvm
snd_hwdep
snd_pcm
snd_timer
snd
pcspkr
soundcore
i2c_i801
lpc_ich
psmouse
serio_raw
intel_ips
irqbypass
mfd_core
battery
ac
mei_me
shpchp
mei
evdev
acpi_cpufreq
tpm_tis
tpm
processor
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
hid_generic
usbhid
hid
sg
sr_mod
cdrom
sd_mod
broadcom
bcm_phy_lib
i915
ahci
libahci
i2c_algo_bit
tg3
ptp
drm_kms_helper
libata
ehci_pci
ehci_hcd
pps_core
scsi_mod
crc32c_intel
libphy
usbcore
drm
usb_common
thermal
wmi
video
fjes
button
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 12)
Subsystem: Acer Incorporated [ALI] Device [1025:0370]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 12) (prog-if 00 [VGA controller])
Subsystem: Acer Incorporated [ALI] Device [1025:0370]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 25
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06)
Subsystem: Acer Incorporated [ALI] Device [1025:0370]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 26
Region 0: Memory at f0804000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0370]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0806000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05)
Subsystem: Acer Incorporated [ALI] Device [1025:0370]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at f0800000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0400000-f04fffff
Prefetchable memory behind bridge: 00000000f0a00000-00000000f0bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f0500000-f05fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000c01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0370]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f0807000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0f, subordinate=0f, sec-latency=0
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b09] (rev 05)
Subsystem: Acer Incorporated [ALI] Device [1025:0370]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller [8086:3b29] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Acer Incorporated [ALI] Device [1025:0370]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 24
Region 0: I/O ports at 1818 [size=8]
Region 1: I/O ports at 180c [size=4]
Region 2: I/O ports at 1810 [size=8]
Region 3: I/O ports at 1808 [size=4]
Region 4: I/O ports at 1820 [size=32]
Region 5: Memory at f0808000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05)
Subsystem: Acer Incorporated [ALI] Device [1025:0370]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 0
Region 0: Memory at f0809000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1840 [size=32]
00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 05)
Subsystem: Acer Incorporated [ALI] Device [1025:0370]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f080a000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel ips
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe [14e4:1692] (rev 01)
Subsystem: Acer Incorporated [ALI] Aspire 7740G [1025:033d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f0400000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
04:00.0 Network controller [0280]: Qualcomm Atheros AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)
Subsystem: Lite-On Communications Inc Device [11ad:6632]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f0500000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.1 Host bridge [0600]: Intel Corporation 1st Generation Core Processor QPI Physical 0 [8086:2d11] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.2 Host bridge [0600]: Intel Corporation 1st Generation Core Processor Reserved [8086:2d12] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.3 Host bridge [0600]: Intel Corporation 1st Generation Core Processor Reserved [8086:2d13] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
** USB devices:
Bus 002 Device 004: ID 064e:a219 Suyin Corp. 1.3M WebCam (notebook emachines E730, Acer sub-brand)
Bus 002 Device 003: ID 046d:c077 Logitech, Inc.
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 8.3
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.4.0-0.bpo.1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.4.0-0.bpo.1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools [linux-initramfs-tool] 0.120
ii kmod 18-3
ii linux-base 4.0~bpo8+1
Versions of packages linux-image-4.4.0-0.bpo.1-amd64 recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
Versions of packages linux-image-4.4.0-0.bpo.1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-22+deb8u1
pn linux-doc-4.4 <none>
Versions of packages linux-image-4.4.0-0.bpo.1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 20160110-1~bpo8+1
ii firmware-misc-nonfree [firmware-ralink] 20160110-1~bpo8+1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information excluded
--- End Message ---