--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-4.2.0-0.bpo.1-amd64: Dell 7348 Airplane Mode Switch not working
- From: Nicholas Cheng Yee Shen <nchengyeeshen@gmail.com>
- Date: Wed, 21 Oct 2015 22:54:01 +0800
- Message-id: <20151021145401.3040.94486.reportbug@queenfish>
Package: src:linux
Version: 4.2.1-2~bpo8+1
Severity: normal
Dear Maintainer,
* What led up to the situation?
A few months ago, I read that Dell had included airplane mode switch functionality into the new Linux 4.2 kernel. I was using Arch that time, when 4.2 entered Arch repos, I installed the kernel release and found the switch to be working. I've since migrated to Debian, and waited for 4.2 to be backported into stable. I installed the backported kernel today. I rebooted my system and tried using the switch but it didn't work. I rebooted a few more times to verify whether it worked, it didn't.
* What exactly did you do (or not do) that was effective (or
ineffective)?
I knew that the switch driver linked itself to rfkill so I checked to see if rfkill was installed into my system and it was. I also thought that maybe the module wasn't loaded but modprobe came up with nothing relating to the driver (dell-rtbn) and lsmod didn't turn up with anything. I also thought that maybe it wasn't included in this release, so I headed over to Debian Packages and downloaded the source for the backported kernel. I verified the presence of the driver source code under drivers/platform/x86/dell-rtbn.c and dell-rtbn.h.
* What was the outcome of this action?
I've tried nothing else so far since my past experience with this switch driver from Arch is that I simply needed to install the relevant kernel image.
* What outcome did you expect instead?
I expected it to be a matter of installing the kernel and the switch would work upon reboot.
-- Package-specific info:
** Version:
Linux version 4.2.0-0.bpo.1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.2.1-2~bpo8+1 (2015-10-09)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.2.0-0.bpo.1-amd64 root=UUID=a948bb16-770d-4379-9389-3afab1ad3dd7 ro quiet
** Not tainted
** Kernel log:
[ 4.675320] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.675322] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.675323] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.675326] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 4.675328] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 4.675330] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 4.675332] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.675333] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 4.700257] Non-volatile memory driver v1.3
[ 4.709273] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 4.770240] ahci 0000:00:1f.2: port does not support device sleep
[ 4.773299] Adding 3906556k swap on /dev/sda2. Priority:-1 extents:1 across:3906556k SSFS
[ 4.780048] intel_rapl: Found RAPL domain package
[ 4.780050] intel_rapl: Found RAPL domain core
[ 4.780052] intel_rapl: Found RAPL domain uncore
[ 4.780053] intel_rapl: Found RAPL domain dram
[ 4.802232] tsc: Refined TSC clocksource calibration: 2194.918 MHz
[ 4.802234] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa37202099, max_idle_ns: 440795206796 ns
[ 4.811603] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 4.910361] usb 2-6: new full-speed USB device number 4 using xhci_hcd
[ 4.914911] RPC: Registered named UNIX socket transport module.
[ 4.914912] RPC: Registered udp transport module.
[ 4.914912] RPC: Registered tcp transport module.
[ 4.914913] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.917669] FS-Cache: Loaded
[ 4.923781] FS-Cache: Netfs 'nfs' registered for caching
[ 4.929924] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 5.040478] usb 2-6: New USB device found, idVendor=8087, idProduct=0a2a
[ 5.040479] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.154654] usb 2-7: new full-speed USB device number 5 using xhci_hcd
[ 5.284954] usb 2-7: New USB device found, idVendor=04f3, idProduct=21d0
[ 5.284955] usb 2-7: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[ 5.284956] usb 2-7: Product: Touchscreen
[ 5.284957] usb 2-7: Manufacturer: ELAN
[ 5.285130] usb 2-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 5.803270] clocksource: Switched to clocksource tsc
[ 5.806924] Console: switching to colour frame buffer device 240x67
[ 5.810755] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 5.810757] i915 0000:00:02.0: registered panic notifier
[ 5.812722] systemd-journald[185]: Received request to flush runtime journal from PID 1
[ 5.835336] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ 5.842960] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[ 5.843034] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 5.952485] Bluetooth: Core ver 2.20
[ 5.952500] NET: Registered protocol family 31
[ 5.952501] Bluetooth: HCI device and connection manager initialized
[ 5.952505] Bluetooth: HCI socket layer initialized
[ 5.952507] Bluetooth: L2CAP socket layer initialized
[ 5.952511] Bluetooth: SCO socket layer initialized
[ 5.967721] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.967724] Bluetooth: BNEP filters: protocol multicast
[ 5.967729] Bluetooth: BNEP socket layer initialized
[ 6.082313] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[ 6.082846] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[ 6.143931] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[ 6.144613] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[ 6.304500] usbcore: registered new interface driver btusb
[ 6.311574] media: Linux media interface: v0.10
[ 6.314805] Linux video capture interface: v2.00
[ 6.319200] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (1bcf:28aa)
[ 6.319583] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 6.319945] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 6.319949] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 6.325011] input: ELAN Touchscreen Pen as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/0003:04F3:21D0.0003/input/input17
[ 6.325152] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/0003:04F3:21D0.0003/input/input18
[ 6.325319] hid-multitouch 0003:04F3:21D0.0003: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-7/input0
[ 6.325347] usbcore: registered new interface driver usbhid
[ 6.325349] usbhid: USB HID core driver
[ 6.328873] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input20
[ 6.328954] usbcore: registered new interface driver uvcvideo
[ 6.328956] USB Video Class driver (1.1.1)
[ 6.417687] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 10.015962] wlan0: authenticate with f0:79:59:e7:92:a8
[ 10.023764] wlan0: send auth to f0:79:59:e7:92:a8 (try 1/3)
[ 10.025689] wlan0: authenticated
[ 10.027477] wlan0: associate with f0:79:59:e7:92:a8 (try 1/3)
[ 10.038466] wlan0: RX AssocResp from f0:79:59:e7:92:a8 (capab=0x431 status=0 aid=5)
[ 10.039302] wlan0: associated
[ 270.002774] wlan0: deauthenticating from f0:79:59:e7:92:a8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 270.032680] cfg80211: World regulatory domain updated:
[ 270.032684] cfg80211: DFS Master region: unset
[ 270.032685] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 270.032688] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 270.032689] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 270.032690] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 270.032691] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 270.032693] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 270.032694] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 270.032695] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 270.032697] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 352.401169] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[ 352.401890] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[ 352.469665] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[ 352.470501] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[ 356.332249] wlan0: authenticate with f0:79:59:e7:92:a8
[ 356.337761] wlan0: send auth to f0:79:59:e7:92:a8 (try 1/3)
[ 356.340024] wlan0: authenticated
[ 356.342693] wlan0: associate with f0:79:59:e7:92:a8 (try 1/3)
[ 356.346287] wlan0: RX AssocResp from f0:79:59:e7:92:a8 (capab=0x431 status=0 aid=3)
[ 356.347541] wlan0: associated
** Model information
sys_vendor: Dell Inc.
product_name: Inspiron 7348
product_version: A07
chassis_vendor: Dell Inc.
chassis_version: A07
bios_vendor: Dell Inc.
bios_version: A07
board_vendor: Dell Inc.
board_name: 08FH29
board_version: A00
** Loaded modules:
cmac
ecb
cpufreq_stats
ctr
ccm
hid_sensor_als
hid_sensor_magn_3d
hid_sensor_gyro_3d
hid_sensor_incl_3d
hid_sensor_rotation
hid_sensor_accel_3d
hid_sensor_trigger
hid_sensor_iio_common
industrialio_triggered_buffer
kfifo_buf
industrialio
hid_sensor_hub
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
v4l2_common
videodev
media
usbhid
btusb
btrtl
btbcm
btintel
binfmt_misc
bnep
bluetooth
snd_hda_codec_hdmi
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
grace
fscache
sunrpc
nls_utf8
nls_cp437
vfat
fat
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
kvm_intel
kvm
crct10dif_pclmul
crc32_pclmul
arc4
ghash_clmulni_intel
nvram
msr
joydev
coretemp
sha256_ssse3
dcdbas
sha256_generic
hmac
iTCO_wdt
iTCO_vendor_support
dell_wmi
sparse_keymap
hid_multitouch
drbg
ansi_cprng
iwlmvm
efi_pstore
dell_led
mac80211
dell_smm_hwmon
snd_hda_codec_realtek
snd_hda_codec_generic
aesni_intel
evdev
aes_x86_64
lrw
gf128mul
glue_helper
iwlwifi
ablk_helper
i915
cryptd
psmouse
serio_raw
pcspkr
efivars
snd_soc_rt5640
snd_hda_intel
snd_soc_rl6231
snd_hda_codec
cfg80211
snd_soc_core
snd_hda_core
snd_compress
lpc_ich
i2c_i801
snd_hwdep
mfd_core
rfkill
drm_kms_helper
snd_pcm
processor_thermal_device
drm
snd_timer
intel_soc_dts_iosf
mei_me
snd
shpchp
regmap_i2c
mei
iosf_mbi
soundcore
i2c_algo_bit
wmi
battery
int3403_thermal
ac
video
dell_smo8800
snd_soc_sst_acpi
dw_dmac
dw_dmac_core
i2c_designware_platform
i2c_designware_core
int3402_thermal
int340x_thermal_zone
button
int3400_thermal
acpi_pad
acpi_thermal_rel
processor
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
sg
sd_mod
ahci
libahci
libata
crc32c_intel
xhci_pci
ehci_pci
xhci_hcd
ehci_hcd
scsi_mod
usbcore
usb_common
thermal
fan
thermal_sys
sdhci_acpi
sdhci
mmc_core
i2c_hid
hid
** Network interface configuration:
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 60:57:18:d7:54:1f brd ff:ff:ff:ff:ff:ff
inet 192.168.1.43/24 brd 192.168.1.255 scope global dynamic wlan0
valid_lft 1261sec preferred_lft 1261sec
inet6 2001:e68:5417:9733:6257:18ff:fed7:541f/64 scope global noprefixroute dynamic
valid_lft 602sec preferred_lft 602sec
inet6 fe80::6257:18ff:fed7:541f/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
wlan0: 3264040 2999 0 0 0 0 0 0 245505 1308 0 0 0 0 0 0
lo: 18347 206 0 0 0 0 0 0 18347 206 0 0 0 0 0 0
*** Protocol statistics:
Ip:
549 total packets received
3 with invalid addresses
0 forwarded
0 incoming packets discarded
542 incoming packets delivered
462 requests sent out
40 outgoing packets dropped
2 dropped because of missing route
Icmp:
81 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 80
echo requests: 1
86 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 85
echo replies: 1
IcmpMsg:
InType3: 80
InType8: 1
OutType0: 1
OutType3: 85
Tcp:
36 active connections openings
2 passive connection openings
6 failed connection attempts
2 connection resets received
0 connections established
1200 segments received
1062 segments send out
5 segments retransmited
0 bad segments received.
16 resets sent
Udp:
362 packets received
85 packets to unknown port received.
0 packet receive errors
214 packets sent
IgnoredMulti: 19
UdpLite:
TcpExt:
7 TCP sockets finished time wait in fast timer
9 delayed acks sent
Quick ack mode was activated 3 times
672 bytes directly in process context from backlog
833 packet headers predicted
1 packets header predicted and directly queued to user
107 acknowledgments not containing data payload received
10 predicted acknowledgments
2 congestion windows recovered without slow start after partial ack
2 other TCP timeouts
TCPLossProbes: 4
3 DSACKs sent for old packets
1 DSACKs received
1 connections reset due to unexpected data
2 connections reset due to early user close
TCPRcvCoalesce: 158
TCPOFOQueue: 1
TCPAutoCorking: 12
TCPSynRetrans: 2
TCPOrigDataSent: 218
IpExt:
InMcastPkts: 196
OutMcastPkts: 112
InBcastPkts: 19
OutBcastPkts: 1
InOctets: 100400
OutOctets: 48004
InMcastOctets: 37655
OutMcastOctets: 14659
InBcastOctets: 2219
OutBcastOctets: 65
InNoECTPkts: 560
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Broadwell-U Host Bridge -OPI [8086:1604] (rev 09)
Subsystem: Dell Device [1028:0675]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: bdw_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation Broadwell-U Integrated Graphics [8086:1616] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:0675]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 48
Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 3000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:03.0 Audio device [0403]: Intel Corporation Broadwell-U Audio Controller [8086:160c] (rev 09)
Subsystem: Dell Device [1028:0675]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 49
Region 0: Memory at c1118000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:04.0 Signal processing controller [1180]: Intel Corporation Broadwell-U Camarillo Device [8086:1603] (rev 09)
Subsystem: Dell Device [1028:0675]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c1110000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: proc_thermal
00:14.0 USB controller [0c03]: Intel Corporation Wildcat Point-LP USB xHCI Controller [8086:9cb1] (rev 03) (prog-if 30 [XHCI])
Subsystem: Dell Device [1028:0675]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at c1100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation Wildcat Point-LP MEI Controller #1 [8086:9cba] (rev 03)
Subsystem: Dell Device [1028:0675]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at c1121000 (64-bit, non-prefetchable) [size=32]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1b.0 Audio device [0403]: Intel Corporation Wildcat Point-LP High Definition Audio Controller [8086:9ca0] (rev 03)
Subsystem: Dell Device [1028:0675]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at c111c000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation Wildcat Point-LP PCI Express Root Port #3 [8086:9c94] (rev e3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: c1000000-c10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation Wildcat Point-LP USB EHCI Controller [8086:9ca6] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0675]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 23
Region 0: Memory at c1125000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation Wildcat Point-LP LPC Controller [8086:9cc3] (rev 03)
Subsystem: Dell Device [1028:0675]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] [8086:9c83] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:0675]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 44
Region 0: I/O ports at 3088 [size=8]
Region 1: I/O ports at 3094 [size=4]
Region 2: I/O ports at 3080 [size=8]
Region 3: I/O ports at 3090 [size=4]
Region 4: I/O ports at 3060 [size=32]
Region 5: Memory at c1124000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation Wildcat Point-LP SMBus Controller [8086:9ca2] (rev 03)
Subsystem: Dell Device [1028:0675]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at c1120000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 3040 [size=32]
00:1f.6 Signal processing controller [1180]: Intel Corporation Wildcat Point-LP Thermal Management Controller [8086:9ca4] (rev 03)
Subsystem: Dell Device [1028:0675]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 255
Region 0: Memory at c1123000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
01:00.0 Network controller [0280]: Intel Corporation Wireless 7265 [8086:095a] (rev 59)
Subsystem: Intel Corporation Dual Band Wireless-AC 7265 [8086:5410]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at c1000000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
** USB devices:
Bus 001 Device 002: ID 8087:8001 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 005: ID 04f3:21d0 Elan Microelectronics Corp.
Bus 002 Device 004: ID 8087:0a2a Intel Corp.
Bus 002 Device 003: ID 1bcf:28aa Sunplus Innovation Technology Inc.
Bus 002 Device 002: ID 0483:91d1 STMicroelectronics
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 8.2
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.2.0-0.bpo.1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.2.0-0.bpo.1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools [linux-initramfs-tool] 0.120
ii kmod 18-3
ii linux-base 3.5
Versions of packages linux-image-4.2.0-0.bpo.1-amd64 recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
Versions of packages linux-image-4.2.0-0.bpo.1-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | grub-efi | extlinux <none>
pn linux-doc-4.2 <none>
Versions of packages linux-image-4.2.0-0.bpo.1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.44~bpo8+1
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-4.2.0-0.bpo.1-amd64/prerm/removing-running-kernel-4.2.0-0.bpo.1-amd64: true
linux-image-4.2.0-0.bpo.1-amd64/postinst/depmod-error-initrd-4.2.0-0.bpo.1-amd64: false
linux-image-4.2.0-0.bpo.1-amd64/postinst/mips-initrd-4.2.0-0.bpo.1-amd64:
--- End Message ---