--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.16-1-amd64: Now Bluetooth errors on system boot
- From: Ralf Jung <post@ralfj.de>
- Date: Tue, 16 Sep 2014 12:16:57 +0200
- Message-id: <20140916101657.21233.95543.reportbug@r-schnelltop>
Package: src:linux
Version: 3.16.2-3
Severity: normal
Dear Maintainer,
since I upgraded to the linux 3.16 packages, I am getting the following bluetooth error on every system boot:
kernel: Bluetooth: hci0 sending initial HCI reset command failed (-19)
I saw so such error with the 3.14 kernel.
This is with the Intel Wireless 7260 proviging WLAN and Bluetooth. I cannot tell whether Bluetooth
actually works, as I do not have a Bluetooth-capable device. However, bluetoothd shows the following
errors in its log:
Sep 15 22:37:31 r-schnelltop bluetoothd[836]: sap-server: Operation not permitted (1)
Sep 15 22:37:31 r-schnelltop bluetoothd[836]: hci0 Load Connection Parameters failed: Unknown Command (0x01)
Sep 16 11:15:58 r-schnelltop bluetoothd[836]: Sap driver initialization failed.
Sep 16 11:15:58 r-schnelltop bluetoothd[836]: sap-server: Operation not permitted (1)
Sep 16 11:15:58 r-schnelltop bluetoothd[836]: hci0 Load Connection Parameters failed: Unknown Command (0x01)
Sep 16 11:41:24 r-schnelltop bluetoothd[836]: Sap driver initialization failed.
Sep 16 11:41:24 r-schnelltop bluetoothd[836]: sap-server: Operation not permitted (1)
Sep 16 11:41:24 r-schnelltop bluetoothd[836]: hci0 Load Connection Parameters failed: Unknown Command (0x01)
Sep 16 11:41:24 r-schnelltop bluetoothd[836]: Failed to set mode: Blocked through rfkill (0x12)
Sep 16 11:42:01 r-schnelltop bluetoothd[836]: Failed to set mode: Blocked through rfkill (0x12)
Sometimes, there are more Bluetooth errors on boot. In this case, the following BT-related messages
are in the log:
Sep 14 14:06:50 r-schnelltop kernel: Bluetooth: hci0: read Intel version: 370710018002030d00
Sep 14 14:06:50 r-schnelltop kernel: bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
Sep 14 14:06:50 r-schnelltop kernel: Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
Sep 14 14:06:50 r-schnelltop kernel: Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-19)
Sep 14 14:06:52 r-schnelltop kernel: Bluetooth: hci0 command 0xfc8e tx timeout
Sep 14 14:06:52 r-schnelltop kernel: Bluetooth: hci0 sending frame failed
Sep 14 14:06:54 r-schnelltop kernel: Bluetooth: hci0 command 0xfc11 tx timeout
Sep 14 14:07:00 r-schnelltop kernel: Bluetooth: hci0 exiting Intel manufacturer mode failed (-110)
This happens in less than 1 of 10 boots.
Boot takes longer than usual in this case, there is a ~5s delay between mounting the last disk and the
display manager appearing (normally, it's less than a second). I never saw these messages with earlier
kernels, but I did sometimes experience a delayed boot, which may or may not have had the same cause.
Kind regards
Ralf
-- Package-specific info:
** Version:
Linux version 3.16-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-10) ) #1 SMP Debian 3.16.2-3 (2014-09-13)
** Command line:
BOOT_IMAGE=/vmlinuz-3.16-1-amd64 root=/dev/mapper/cryptvg-rootlv ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[17468.783135] PM: late suspend of devices complete after 15.972 msecs
[17468.784528] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
[17468.784553] r8169 0000:05:00.0: System wakeup enabled by ACPI
[17468.784877] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[17468.784989] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[17468.799423] PM: noirq suspend of devices complete after 16.262 msecs
[17468.800026] ACPI: Preparing to enter system sleep state S3
[17468.800435] PM: Saving platform NVS memory
[17468.802183] Disabling non-boot CPUs ...
[17468.802313] intel_pstate CPU 1 exiting
[17468.803914] kvm: disabling virtualization on CPU1
[17468.803948] smpboot: CPU 1 is now offline
[17468.804698] intel_pstate CPU 2 exiting
[17468.806180] kvm: disabling virtualization on CPU2
[17468.907180] smpboot: CPU 2 is now offline
[17468.907977] intel_pstate CPU 3 exiting
[17468.909405] kvm: disabling virtualization on CPU3
[17469.011295] smpboot: CPU 3 is now offline
[17469.013480] ACPI: Low-level resume complete
[17469.013519] PM: Restoring platform NVS memory
[17469.013992] Enabling non-boot CPUs ...
[17469.014072] x86: Booting SMP configuration:
[17469.014073] smpboot: Booting Node 0 Processor 1 APIC 0x2
[17469.024823] CPU1 microcode updated early to revision 0x29, date = 2013-06-12
[17469.025055] kvm: enabling virtualization on CPU1
[17469.027275] Intel pstate controlling: cpu 1
[17469.027335] CPU1 is up
[17469.027393] smpboot: Booting Node 0 Processor 2 APIC 0x1
[17469.037954] CPU2 microcode updated early to revision 0x29, date = 2013-06-12
[17469.038703] kvm: enabling virtualization on CPU2
[17469.040922] Intel pstate controlling: cpu 2
[17469.040981] CPU2 is up
[17469.041046] smpboot: Booting Node 0 Processor 3 APIC 0x3
[17469.052026] kvm: enabling virtualization on CPU3
[17469.054261] Intel pstate controlling: cpu 3
[17469.054320] CPU3 is up
[17469.057284] ACPI: Waking up from system sleep state S3
[17469.074162] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
[17469.074313] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[17469.074399] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[17469.074468] PM: noirq resume of devices complete after 15.197 msecs
[17469.074735] PM: early resume of devices complete after 0.232 msecs
[17469.074800] mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
[17469.075148] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[17469.077436] usb usb1: root hub lost power or was reset
[17469.077437] usb usb2: root hub lost power or was reset
[17469.078951] r8169 0000:05:00.0: System wakeup disabled by ACPI
[17469.086334] sd 0:0:0:0: [sda] Starting disk
[17469.087246] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X
[17469.087251] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
[17469.087255] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
[17469.087260] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
[17469.087264] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
[17469.087402] sd 1:0:0:0: [sdb] Starting disk
[17469.149445] [drm] Wrong MCH_SSKPD value: 0x16040307
[17469.149446] [drm] This can cause pipe underruns and display issues.
[17469.149446] [drm] Please upgrade your BIOS to fix this.
[17469.221686] r8169 0000:05:00.0 eth0: link down
[17469.301764] usb 3-1.4: reset high-speed USB device number 5 using ehci-pci
[17469.405739] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[17469.406644] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[17469.465984] usb 3-1.2: reset high-speed USB device number 4 using ehci-pci
[17469.488550] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[17469.488699] ata2.00: configured for UDMA/133
[17469.604658] PM: resume of devices complete after 529.311 msecs
[17469.605174] PM: Finishing wakeup.
[17469.605177] Restarting tasks ... done.
[17469.606789] video LNXVIDEO:00: Restoring backlight state
[17469.608499] bbswitch: disabling discrete graphics
[17469.608519] ACPI Warning: \_SB_.PCI0.PEGR.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[17469.686149] usb 3-1.1: new full-speed USB device number 8 using ehci-pci
[17469.692510] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[17469.780120] usb 3-1.1: New USB device found, idVendor=8087, idProduct=07dc
[17469.780123] usb 3-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[17469.793486] Bluetooth: hci0: read Intel version: 370710018002030d00
[17469.793541] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[17469.793545] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[17469.833951] r8169 0000:05:00.0 eth0: link down
[17469.834013] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[17469.834915] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[17469.835160] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[17469.848724] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17469.975781] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[17470.751271] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[17471.696332] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[17471.698007] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[17471.698016] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[17471.698021] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[17471.701055] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[17471.701065] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[17471.701072] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[17471.702213] ata1.00: configured for UDMA/133
[17482.719462] wlan0: authenticate with 80:1f:02:77:77:46
[17482.722525] wlan0: send auth to 80:1f:02:77:77:46 (try 1/3)
[17482.724356] wlan0: authenticated
[17482.725285] wlan0: associate with 80:1f:02:77:77:46 (try 1/3)
[17482.729301] wlan0: RX AssocResp from 80:1f:02:77:77:46 (capab=0x411 status=0 aid=2)
[17482.732501] wlan0: associated
[17482.732563] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[18892.067200] capability: warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
** Model information
sys_vendor: ASUSTeK Computer Inc.
product_name: K53SM
product_version: 1.0
chassis_vendor: ASUSTeK Computer Inc.
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: K53SM.214
board_vendor: ASUSTeK Computer Inc.
board_name: K53SM
board_version: 1.0
** Loaded modules:
hid_generic
usbhid
hid
nls_utf8
nls_cp437
vfat
fat
mmc_block
rtsx_usb_sdmmc
rtsx_usb_ms
mmc_core
memstick
rtsx_usb
ctr
ccm
bnep
bbswitch(O)
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
binfmt_misc
vboxdrv(O)
joydev
arc4
ecb
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
v4l2_common
btusb
videodev
media
bluetooth
6lowpan_iphc
iTCO_wdt
iTCO_vendor_support
asus_nb_wmi
asus_wmi
iwlmvm
sparse_keymap
mxm_wmi
mac80211
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
coretemp
kvm_intel
snd_hda_codec_hdmi
kvm
snd_hda_codec_realtek
snd_hda_codec_generic
snd_hda_intel
snd_hda_controller
iwlwifi
snd_hda_codec
snd_hwdep
snd_pcm
pcspkr
cfg80211
snd_timer
snd
mei_me
soundcore
rfkill
psmouse
mei
serio_raw
i2c_i801
shpchp
lpc_ich
mfd_core
wmi
battery
ac
evdev
processor
nf_conntrack_ipv6
nf_defrag_ipv6
ip6table_filter
ip6_tables
xt_tcpudp
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
nf_conntrack
iptable_filter
ip_tables
x_tables
cuse
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
algif_skcipher
af_alg
dm_crypt
dm_mod
sg
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_pclmul
crct10dif_common
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
i915
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
cryptd
ehci_pci
ahci
xhci_hcd
ehci_hcd
libahci
libata
i2c_algo_bit
r8169
mii
drm_kms_helper
scsi_mod
usbcore
drm
usb_common
i2c_core
thermal
video
thermal_sys
button
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: db000000-dc0fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:212e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 48
Region 0: Memory at dc400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at e000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 49
Region 0: Memory at df00a000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at df008000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:1ac3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 51
Region 0: Memory at df000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: de600000-deffffff
Prefetchable memory behind bridge: 00000000d4200000-00000000d4bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: ddc00000-de5fffff
Prefetchable memory behind bridge: 00000000d3700000-00000000d40fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: dd200000-ddbfffff
Prefetchable memory behind bridge: 00000000d2c00000-00000000d35fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: dc800000-dd1fffff
Prefetchable memory behind bridge: 00000000d2100000-00000000d2afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at df007000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 42
Region 0: I/O ports at e0b0 [size=8]
Region 1: I/O ports at e0a0 [size=4]
Region 2: I/O ports at e090 [size=8]
Region 3: I/O ports at e080 [size=4]
Region 4: I/O ports at e060 [size=32]
Region 5: Memory at df006000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at df005000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at e040 [size=32]
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108M [GeForce GT 630M] [10de:0de9] (rev ff) (prog-if ff)
!!! Unknown header type 7f
03:00.0 Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b1] (rev 73)
Subsystem: Intel Corporation Dual Band Wireless-AC 7260 [8086:4070]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at ddc00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
04:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller [1b21:1042] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1059]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at dd200000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: I/O ports at 9000 [size=256]
Region 2: Memory at d2104000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d2100000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 005: ID 0bda:0139 Realtek Semiconductor Corp. RTS5139 Card Reader Controller
Bus 003 Device 004: ID 13d3:5710 IMC Networks UVC VGA Webcam
Bus 003 Device 008: ID 8087:07dc Intel Corp.
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (990, 'testing'), (100, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.16-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.116
ii kmod 18-1
ii linux-base 3.5
ii module-init-tools 18-1
Versions of packages linux-image-3.16-1-amd64 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.16-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-22
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.43
pn firmware-libertas <none>
ii firmware-linux 0.43
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.43
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16-1-amd64/postinst/depmod-error-initrd-3.16-1-amd64: false
linux-image-3.16-1-amd64/prerm/removing-running-kernel-3.16-1-amd64: true
linux-image-3.16-1-amd64/postinst/mips-initrd-3.16-1-amd64:
--- End Message ---