--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.11-2-amd64: switch to VT on laptop with external screen doesn't update external screen
- From: Vincent Lefevre <vincent@vinc17.net>
- Date: Sat, 22 Mar 2014 12:30:13 +0100
- Message-id: <20140322113013.GA26789@xvii.vinc17.org>
Package: src:linux
Version: 3.11.10-1
Severity: normal
I usually use my laptop with an external screen, using:
xrandr --fb 1920x1200 --output VGA-1 --mode 1920x1200 \
--output LVDS-1 --panning 1920x1200 && \
xrandr --output LVDS-1 --off
in my .xsession script. But when I switch to a VT with Ctrl-Alt-F1,
the contents of the external screen remains frozen, until I type
Ctrl-Alt-F7 to go back to X.
Then I did:
xrandr --output LVDS-1 --auto
and tried the same thing. Everything was OK on the laptop screen,
but the problem remained with the external screen.
-- Package-specific info:
** Version:
Linux version 3.11-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-7) ) #1 SMP Debian 3.11.10-1 (2013-12-04)
** Command line:
root=/dev/mapper/xvii-root ro quiet reboot=pci
** Not tainted
** Kernel log:
[10224.200312] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa0b
[10224.200312] Enabling non-boot CPUs ...
[10224.200312] smpboot: Booting Node 0 Processor 1 APIC 0x1
[10224.212681] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[10224.216677] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
[10224.220940] CPU1 is up
[10224.223325] ACPI: Waking up from system sleep state S3
[10224.277204] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[10224.282368] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[10224.288144] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[10224.309058] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[10224.329250] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[10224.334306] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[10224.339325] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[10224.356808] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[10224.404240] yenta_cardbus 0000:03:01.0: proprietary Ricoh MMC controller disabled (via cardbus function)
[10224.404242] yenta_cardbus 0000:03:01.0: MMC cards are now supported by standard SDHCI controller
[10224.436384] PM: noirq resume of devices complete after 179.616 msecs
[10224.436581] PM: early resume of devices complete after 0.162 msecs
[10224.436616] pci0000:00: System wakeup disabled by ACPI
[10224.436626] e1000e 0000:00:19.0: setting latency timer to 64
[10224.436657] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[10224.438800] pci 0000:00:1e.0: setting latency timer to 64
[10224.438816] ahci 0000:00:1f.2: setting latency timer to 64
[10224.438949] iwlwifi 0000:0c:00.0: RF_KILL bit toggled to disable radio.
[10224.439205] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[10224.439235] usb usb3: root hub lost power or was reset
[10224.439281] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[10224.439309] usb usb2: root hub lost power or was reset
[10224.439596] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[10224.439622] usb usb4: root hub lost power or was reset
[10224.439789] ehci-pci 0000:00:1a.7: setting latency timer to 64
[10224.439996] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[10224.440207] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[10224.440234] usb usb5: root hub lost power or was reset
[10224.440383] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[10224.440409] usb usb6: root hub lost power or was reset
[10224.440576] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[10224.440603] usb usb7: root hub lost power or was reset
[10224.440750] ehci-pci 0000:00:1d.7: setting latency timer to 64
[10224.440774] nouveau [ DRM] re-enabling device...
[10224.440854] nouveau [ DRM] resuming kernel object tree...
[10224.440862] nouveau [ VBIOS][0000:01:00.0] running init tables
[10224.553632] serial 00:08: activated
[10224.646752] nouveau [ DRM] resuming client object trees...
[10224.647315] nouveau [ DRM] resuming display...
[10224.776064] usb 1-6: reset high-speed USB device number 4 using ehci-pci
[10224.780056] ata5: SATA link down (SStatus 0 SControl 300)
[10224.788062] ata6: SATA link down (SStatus 0 SControl 300)
[10224.944078] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[10225.012865] ata2.00: configured for UDMA/100
[10225.054966] dell_wmi: Received unknown WMI event (0x11)
[10225.144090] firewire_core 0000:03:01.1: rediscovered device fw0
[10227.896093] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[10227.905758] ata1.00: configured for UDMA/133
[10227.920132] sd 0:0:0:0: [sda] Starting disk
[10228.068228] PM: resume of devices complete after 3631.643 msecs
[10228.068567] PM: Finishing wakeup.
[10228.068569] Restarting tasks ... done.
[10228.077436] video LNXVIDEO:00: Restoring backlight state
[10228.710908] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[10228.716208] usb 4-1: USB disconnect, device number 4
[10228.812427] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[10228.812904] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[10228.956094] usb 4-1: new full-speed USB device number 5 using uhci_hcd
[10229.134357] usb 4-1: New USB device found, idVendor=0a5c, idProduct=5800
[10229.134369] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[10229.134376] usb 4-1: Product: 5880
[10229.134382] usb 4-1: Manufacturer: Broadcom Corp
[10229.134388] usb 4-1: SerialNumber: 0123456789ABCD
[10229.134682] usb 4-1: config 0 descriptor??
[10229.512083] usb 2-1: new full-speed USB device number 8 using uhci_hcd
[10245.217187] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[10245.217308] e1000e 0000:00:19.0 eth0: Link Speed was downgraded by SmartSpeed
[10245.217315] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[10245.217369] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[10245.244072] device eth0 entered promiscuous mode
[10251.960208] e1000e: eth0 NIC Link is Down
[10255.304066] device eth0 left promiscuous mode
[10272.741194] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[10283.714907] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[10283.816401] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[10283.816887] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[10286.797192] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[10286.797358] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[10286.816167] device eth0 entered promiscuous mode
[10296.827030] device eth0 left promiscuous mode
[36188.309630] opendkim[3358]: segfault at ffffffff000002f8 ip 00007fd24f798080 sp 00007fffc748fdf8 error 5 in libpthread-2.18.so[7fd24f78b000+18000]
[41708.452136] perf samples too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[162143.776513] systemd-udevd[5193]: starting version 204
[162217.369527] traps: ld-linux-x32.so[6965] general protection ip:f7749bbd sp:ff818168 error:0 in ld-2.18.so[f7733000+20000]
[162217.487482] traps: ld-linux-x32.so[6979] general protection ip:f7738bbd sp:ffefaff8 error:0 in ld-2.18.so[f7722000+20000]
[162217.516378] traps: ld-linux-x32.so[6993] general protection ip:f775ebbd sp:ff9a21f8 error:0 in ld-2.18.so[f7748000+20000]
[162217.547355] traps: ld-linux-x32.so[7007] general protection ip:f77c3bbd sp:ff8a3778 error:0 in ld-2.18.so[f77ad000+20000]
[162217.557462] traps: ld-linux-x32.so[7021] general protection ip:f776bbbd sp:fff3e9e8 error:0 in ld-2.18.so[f7755000+20000]
[162217.567392] traps: ld-linux-x32.so[7035] general protection ip:f7709bbd sp:ffc08fd8 error:0 in ld-2.18.so[f76f3000+20000]
[162217.577545] traps: ld-linux-x32.so[7049] general protection ip:f77d9bbd sp:fff032d8 error:0 in ld-2.18.so[f77c3000+20000]
[162220.871721] traps: ld-linux-x32.so[7368] general protection ip:f776cbbd sp:fff01368 error:0 in ld-2.18.so[f7756000+20000]
[162226.413547] traps: ld-linux-x32.so[7952] general protection ip:f771abbd sp:ffa38da8 error:0 in ld-2.18.so[f7704000+20000]
[344930.456475] dell_wmi: Received unknown WMI event (0x11)
** Model information
sys_vendor: Dell Inc.
product_name: Latitude E6400
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A12
board_vendor: Dell Inc.
board_name: 0K672N
board_version:
** Loaded modules:
cpuid
hid_apple
xt_multiport
iptable_filter
ip_tables
x_tables
cuse
cpufreq_powersave
cpufreq_stats
cpufreq_userspace
cpufreq_conservative
bnep
rfcomm
binfmt_misc
uinput
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
firewire_sbp2
loop
fuse
parport_pc
ppdev
lp
parport
btusb
bluetooth
joydev
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
videodev
media
coretemp
dell_wmi
arc4
sparse_keymap
kvm
iwldvm
dell_laptop
dcdbas
evdev
nouveau
mac80211
iTCO_wdt
iTCO_vendor_support
psmouse
microcode
snd_hda_codec_idt
pcspkr
serio_raw
snd_hda_intel
pcmcia
mxm_wmi
wmi
snd_hda_codec
i2c_i801
yenta_socket
pcmcia_rsrc
pcmcia_core
battery
button
video
ac
ttm
snd_hwdep
snd_pcm
acpi_cpufreq
drm_kms_helper
drm
snd_page_alloc
snd_seq
iwlwifi
snd_seq_device
cfg80211
mperf
snd_timer
snd
soundcore
rfkill
i2c_algo_bit
i2c_core
lpc_ich
processor
mfd_core
ext4
crc16
mbcache
jbd2
sha256_generic
cbc
hid_generic
usbhid
hid
dm_crypt
dm_mod
sg
sr_mod
sd_mod
cdrom
crc_t10dif
firewire_ohci
firewire_core
crc_itu_t
sdhci_pci
sdhci
mmc_core
ahci
libahci
libata
scsi_mod
thermal
thermal_sys
uhci_hcd
ehci_pci
ehci_hcd
usbcore
usb_common
e1000e
ptp
pps_core
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port [8086:2a41] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f2000000-f6efffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network Connection [8086:10f5] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f6fe0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f6fdb000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at efe0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f60 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f80 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6fa0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f6fdc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0600000-f07fffff
Prefetchable memory behind bridge: 00000000f0800000-00000000f09fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f1f00000-f1ffffff
Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f0000000-f01fffff
Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f20 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6f40 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=07, sec-latency=32
I/O behind bridge: 00005000-00005fff
Memory behind bridge: f1e00000-f1efffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 Mobile SATA Controller [RAID mode] [8086:282a] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 45
Region 0: I/O ports at 6e70 [size=8]
Region 1: I/O ports at 6e78 [size=4]
Region 2: I/O ports at 6e80 [size=8]
Region 3: I/O ports at 6e88 [size=4]
Region 4: I/O ports at 6ea0 [size=32]
Region 5: Memory at fed1c800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 0: Memory at f6fdaf00 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1100 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G98M [Quadro NVS 160M] [10de:06eb] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f2000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at df00 [size=128]
[virtual] Expansion ROM at f4000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
03:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ba)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
Memory window 0: f0c00000-f0ffffff (prefetchable)
Memory window 1: f1000000-f13fffff
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Capabilities: <access denied>
Kernel driver in use: yenta_cardbus
03:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 04) (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f1eff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
03:01.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 21) (prog-if 01)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f1eff600 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
0c:00.0 Network controller [0280]: Intel Corporation Ultimate N WiFi Link 5300 [8086:4235]
Subsystem: Intel Corporation Device [8086:1121]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f1ffe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
** USB devices:
Bus 008 Device 004: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 008 Device 003: ID 05ac:0221 Apple, Inc. Aluminum Keyboard (ISO)
Bus 008 Device 002: ID 05ac:1006 Apple, Inc. Hub in Aluminum Keyboard
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0c45:63f8 Microdia Sonix Integrated Webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 005: ID 0a5c:5800 Broadcom Corp. BCM5880 Secure Applications Processor
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.11-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=POSIX, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.11-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.52
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 16-2
ii linux-base 3.5
ii module-init-tools 16-2
Versions of packages linux-image-3.11-2-amd64 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.11-2-amd64 suggests:
ii debian-kernel-handbook 1.0.15
pn grub-pc | extlinux | lilo <none>
ii linux-doc-3.11 3.11.10-1
Versions of packages linux-image-3.11-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.41
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.11-2-amd64/postinst/depmod-error-initrd-3.11-2-amd64: false
linux-image-3.11-2-amd64/prerm/removing-running-kernel-3.11-2-amd64: true
--- End Message ---