--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.2.0-4-amd64: KVM displays error and abends when writing to a USB2 thumb drive in a USB3 port
- From: Neal Murphy <neal.p.murphy@alum.wpi.edu>
- Date: Wed, 19 Mar 2014 01:10:19 -0400
- Message-id: <20140319051019.7957.76327.reportbug@playground>
Package: src:linux
Version: 3.2.54-2
Severity: normal
Running up-to-date 64-bit Wheezy and running a 32-bit linux 3.4 system in a KVM
(not virtio).
QEMU emulator version 1.1.2 (qemu-kvm-1.1.2+dfsg-6, Debian), Copyright (c)
2003-2008 Fabrice Bellard
For some years now, I've been able to 'hot plug' a USB thumb drive into a KVM
session. One function of my initramfs is to convert the boot ISO to a thumb
drive for booting and installation when an optical drive isn't available; this,
too, has been working very well.
This evening I tried that trick again. I plugged a USB2 thumb drive into a USB3
port and 'hot-plugged' it into the KVM session. When it started to write
to the thumb drive, kvm displayed:
USBDEVFS_SUBMITURB: Cannot allocate memory
kvm: /tmp/buildd/qemu-kvm-1.1.2+dfsg/hw/usb/hcd-uhci.c:979: uhci_fill_queue:
Assertion `ret == TD_RESULT_ASYNC_START' failed.
and aborted. I tried several times with the same result.
On a whim, I tried it using a USB2 port. The conversion completed successfully.
The beginning of the included kernel log may show part of the problem.
It's either a kernel USB3 problem or a qemu-kvm problem; I picked one at
random.
I called it 'grave' because someone could be running a real system in a KVM and
potentially lose data to the unexpected 'virtual power failure'.
Neal
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.54-2
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=638f3767-4643-491b-957d-0db178552bcb ro quiet
** Not tainted
** Kernel log:
[36059.477211] sd 11:0:0:0: [sdd] No Caching mode page found
[36059.477228] sd 11:0:0:0: [sdd] Assuming drive cache: write through
[36059.481062] sd 11:0:0:0: [sdd] No Caching mode page found
[36059.481077] sd 11:0:0:0: [sdd] Assuming drive cache: write through
[36059.482141] sdd: sdd1
[36059.486290] sd 11:0:0:0: [sdd] No Caching mode page found
[36059.486298] sd 11:0:0:0: [sdd] Assuming drive cache: write through
[36059.486305] sd 11:0:0:0: [sdd] Attached SCSI removable disk
[36093.065090] usb 6-2: reset high-speed USB device number 3 using xhci_hcd
[36093.149876] xhci_hcd 0000:09:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803aa9911c0
[36093.149884] xhci_hcd 0000:09:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803aa991200
[36093.425048] usb 6-2: reset high-speed USB device number 3 using xhci_hcd
[36093.509745] xhci_hcd 0000:09:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803aa9911c0
[36093.509753] xhci_hcd 0000:09:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803aa991200
[36093.840860] usb 6-2: usbfs: interface 0 claimed by usb-storage while 'kvm' sets config #1
[36104.097149] xhci_hcd 0000:09:00.0: ERROR no room on ep ring
[36104.097162] usb 6-2: usbfs: usb_submit_urb returned -12
[36104.206254] RED: port 2(tapRD0051) entering forwarding state
[36104.212904] RED: port 2(tapRD0051) entering disabled state
[36104.213028] device tapRD0051 left promiscuous mode
[36104.213033] RED: port 2(tapRD0051) entering disabled state
[36375.486761] usb 6-2: USB disconnect, device number 3
[36410.416176] usb 6-2: new high-speed USB device number 4 using xhci_hcd
[36410.525813] usb 6-2: New USB device found, idVendor=13fe, idProduct=3e00
[36410.525820] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[36410.525825] usb 6-2: Product: Patriot Memory
[36410.525829] usb 6-2: Manufacturer:
[36410.525832] usb 6-2: SerialNumber: 07012447DDB2A647
[36410.527205] scsi12 : usb-storage 6-2:1.0
[36411.601142] scsi 12:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 4
[36411.602295] sd 12:0:0:0: Attached scsi generic sg4 type 0
[36413.001682] sd 12:0:0:0: [sdd] 62554112 512-byte logical blocks: (32.0 GB/29.8 GiB)
[36413.002835] sd 12:0:0:0: [sdd] Write Protect is off
[36413.002843] sd 12:0:0:0: [sdd] Mode Sense: 23 00 00 00
[36413.003975] sd 12:0:0:0: [sdd] No Caching mode page found
[36413.003982] sd 12:0:0:0: [sdd] Assuming drive cache: write through
[36413.007909] sd 12:0:0:0: [sdd] No Caching mode page found
[36413.007918] sd 12:0:0:0: [sdd] Assuming drive cache: write through
[36413.032471] sdd: sdd1
[36413.035704] sd 12:0:0:0: [sdd] No Caching mode page found
[36413.035711] sd 12:0:0:0: [sdd] Assuming drive cache: write through
[36413.035718] sd 12:0:0:0: [sdd] Attached SCSI removable disk
[36431.364941] ISO 9660 Extensions: Microsoft Joliet Level 3
[36431.365025] ISO 9660 Extensions: RRIP_1991A
[36431.368467] FAT-fs (sdd1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[38754.386980] FAT-fs (sdd1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[38920.074784] sdd: detected capacity change from 32027705344 to 0
[38930.342450] usb 6-2: USB disconnect, device number 4
[40092.884274] RED: port 1(eth0) entering forwarding state
[40093.060915] RED: port 1(eth0) entering disabled state
[40093.064296] RED: mixed no checksumming and other settings.
[40093.064756] ADDRCONF(NETDEV_UP): eth0: link is not ready
[40093.086034] device eth0 left promiscuous mode
[40093.160499] device eth0 entered promiscuous mode
[40093.177289] r8169 0000:0a:00.0: eth0: link down
[40093.177337] r8169 0000:0a:00.0: eth0: link down
[40093.180563] ADDRCONF(NETDEV_UP): eth0: link is not ready
[40093.187367] ADDRCONF(NETDEV_UP): RED: link is not ready
[40096.006416] r8169 0000:0a:00.0: eth0: link up
[40096.009699] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[40096.010085] RED: port 1(eth0) entering forwarding state
[40096.010142] RED: port 1(eth0) entering forwarding state
[40096.013448] ADDRCONF(NETDEV_CHANGE): RED: link becomes ready
[40106.376080] RED: no IPv6 routers present
[40111.040112] RED: port 1(eth0) entering forwarding state
[41027.212097] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[41027.350334] usb 2-1: New USB device found, idVendor=13fe, idProduct=3e00
[41027.350341] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[41027.350346] usb 2-1: Product: Patriot Memory
[41027.350350] usb 2-1: Manufacturer:
[41027.350353] usb 2-1: SerialNumber: 07012447DDB2A647
[41027.351006] scsi13 : usb-storage 2-1:1.0
[41028.426015] scsi 13:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 4
[41028.427112] sd 13:0:0:0: Attached scsi generic sg4 type 0
[41029.724678] sd 13:0:0:0: [sdd] 62554112 512-byte logical blocks: (32.0 GB/29.8 GiB)
[41029.726039] sd 13:0:0:0: [sdd] Write Protect is off
[41029.726047] sd 13:0:0:0: [sdd] Mode Sense: 23 00 00 00
[41029.727362] sd 13:0:0:0: [sdd] No Caching mode page found
[41029.727369] sd 13:0:0:0: [sdd] Assuming drive cache: write through
[41029.733435] sd 13:0:0:0: [sdd] No Caching mode page found
[41029.733443] sd 13:0:0:0: [sdd] Assuming drive cache: write through
[41029.756456] sdd: sdd1
[41029.761437] sd 13:0:0:0: [sdd] No Caching mode page found
[41029.761445] sd 13:0:0:0: [sdd] Assuming drive cache: write through
[41029.761452] sd 13:0:0:0: [sdd] Attached SCSI removable disk
[41051.363275] device tapRD0051 entered promiscuous mode
[41051.371949] RED: port 2(tapRD0051) entering forwarding state
[41051.371977] RED: port 2(tapRD0051) entering forwarding state
[41062.208023] tapRD0051: no IPv6 routers present
[41069.187952] kvm: 7554: cpu0 unhandled rdmsr: 0xc0011021
[41069.187957] kvm: 7554: cpu0 unhandled rdmsr: 0xc0011021
[41069.317701] kvm: 7554: cpu1 unhandled rdmsr: 0xc0011021
[41069.317714] kvm: 7554: cpu1 unhandled rdmsr: 0xc0011021
[41069.333764] kvm: 7554: cpu2 unhandled rdmsr: 0xc0011021
[41069.333777] kvm: 7554: cpu2 unhandled rdmsr: 0xc0011021
[41069.349759] kvm: 7554: cpu3 unhandled rdmsr: 0xc0011021
[41069.349772] kvm: 7554: cpu3 unhandled rdmsr: 0xc0011021
[41088.468165] usb 2-1: reset high-speed USB device number 2 using ehci_hcd
[41088.824132] usb 2-1: reset high-speed USB device number 2 using ehci_hcd
[41089.292900] usb 2-1: usbfs: interface 0 claimed by usb-storage while 'kvm' sets config #1
** Model information
sys_vendor: To be filled by O.E.M.
product_name: To be filled by O.E.M.
product_version: To be filled by O.E.M.
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: 2201
board_vendor: ASUSTeK COMPUTER INC.
board_name: M5A99FX PRO R2.0
board_version: Rev 1.xx
** Loaded modules:
isofs
nls_utf8
nls_cp437
usb_storage
pppoe
pppox
ppp_generic
slhc
fuse
parport_pc
ppdev
lp
parport
nfnetlink_log
nfnetlink
rfcomm
bnep
cpufreq_powersave
cpufreq_stats
cpufreq_userspace
cpufreq_conservative
bluetooth
binfmt_misc
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
bridge
stp
vfat
fat
ext4
crc16
jbd2
mbcache
it87
hwmon_vid
loop
firewire_sbp2
firewire_core
crc_itu_t
vhost_net
tun
macvtap
macvlan
kvm_amd
kvm
joydev
hid_logitech_dj
pl2303
usbhid
usbserial
hid
e100
radeon
sg
snd_hda_codec_hdmi
sr_mod
cdrom
ttm
powernow_k8
drm_kms_helper
r8169
drm
sp5100_tco
power_supply
i2c_algo_bit
mii
k10temp
fam15h_power
snd_hda_codec_realtek
shpchp
mperf
ohci_hcd
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
snd_page_alloc
snd_seq
snd_seq_device
snd_timer
xhci_hcd
snd
eeepc_wmi
asus_wmi
sparse_keymap
rfkill
ehci_hcd
edac_mce_amd
edac_core
psmouse
usbcore
evdev
mxm_wmi
wmi
i2c_piix4
usb_common
pcspkr
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
aes_generic
soundcore
serio_raw
cryptd
i2c_core
processor
button
thermal_sys
reiserfs
microcode
sd_mod
crc_t10dif
ahci
libahci
libata
scsi_mod
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (external gfx0 port B) [1002:5a14] (rev 02)
Subsystem: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (external gfx0 port B) [1002:5a14]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: <access denied>
00:00.2 IOMMU [0806]: Advanced Micro Devices [AMD] nee ATI RD990 I/O Memory Management Unit (IOMMU) [1002:5a23]
Subsystem: Advanced Micro Devices [AMD] nee ATI RD990 I/O Memory Management Unit (IOMMU) [1002:5a23]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 72
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port B) [1002:5a16] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port D) [1002:5a18] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0b.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (NB-SB link) [1002:5a1f] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0d.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (external gfx1 port B) [1002:5a1e] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:84dd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at f040 [size=8]
Region 1: I/O ports at f030 [size=4]
Region 2: I/O ports at f020 [size=8]
Region 3: I/O ports at f010 [size=4]
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at feb0b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feb0a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at feb09000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at feb08000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 21
Region 0: Memory at feb07000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 42)
Subsystem: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: piix4_smbus
00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
Subsystem: ASUSTeK Computer Inc. Device [1043:84fb]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=05, subordinate=06, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe300000-fe6fffff
Prefetchable memory behind bridge: d0100000-d01fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at feb06000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:15.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) [1002:43a0] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe900000-fe9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:15.1 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) [1002:43a1] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
Memory behind bridge: fe800000-fe8fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:15.2 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SB900 PCI to PCI bridge (PCIE port 2) [1002:43a2] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Memory behind bridge: fe700000-fe7fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:15.3 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SB900 PCI to PCI bridge (PCIE port 3) [1002:43a3] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:16.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at feb05000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:16.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 23
Region 0: Memory at feb04000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 0 [1022:1600]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 1 [1022:1601]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 2 [1022:1602]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 3 [1022:1603]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 4 [1022:1604]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: fam15h_power
00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 5 [1022:1605]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Cedar PRO [Radeon HD 5450/6350] [1002:68f9] (prog-if 00 [VGA controller])
Subsystem: VISIONTEK Device [1545:5450]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 92
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fea20000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at e000 [size=256]
Expansion ROM at fea00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI Cedar HDMI Audio [Radeon HD 5400/6300 Series] [1002:aa68]
Subsystem: VISIONTEK Device [1545:aa68]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 90
Region 0: Memory at fea40000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
05:05.0 PCI bridge [0604]: Digital Equipment Corporation DECchip 21152 [1011:0024] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Bus: primary=05, secondary=06, subordinate=06, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe300000-fe6fffff
Prefetchable memory behind bridge: 00000000d0100000-00000000d01fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
06:04.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 05)
Subsystem: Intel Corporation EtherExpress PRO/100+ Dual Port Adapter [8086:10f0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min, 14000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d0101000 (32-bit, prefetchable) [size=4K]
Region 1: I/O ports at d020 [size=32]
Region 2: Memory at fe600000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at fe500000 [disabled] [size=1M]
Capabilities: <access denied>
Kernel driver in use: e100
06:05.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 05)
Subsystem: Intel Corporation EtherExpress PRO/100+ Dual Port Adapter [8086:10f0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min, 14000ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at d0100000 (32-bit, prefetchable) [size=4K]
Region 1: I/O ports at d000 [size=32]
Region 2: Memory at fe400000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at fe300000 [disabled] [size=1M]
Capabilities: <access denied>
Kernel driver in use: e100
07:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:0612] (rev 01) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:84b7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 73
Region 0: I/O ports at c050 [size=8]
Region 1: I/O ports at c040 [size=4]
Region 2: I/O ports at c030 [size=8]
Region 3: I/O ports at c020 [size=4]
Region 4: I/O ports at c000 [size=32]
Region 5: Memory at fe900000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: ahci
08:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller [1b21:1042] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8488]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
09:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller [1b21:1042] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8488]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
0a:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 09)
Subsystem: ASUSTeK Computer Inc. Device [1043:8505]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 91
Region 0: I/O ports at b000 [size=256]
Region 2: Memory at d0004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 13fe:3e00 Kingston Technology Company Inc.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 003: ID 1453:4026 Radio Shack 26-183 Serial Cable
Bus 008 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 7.4
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.2.0-4-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.115~bpo70+1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u2
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
--- End Message ---