Maybe it can be interesting to know that this machine has a nvidia 650m which does not make use of the optimus technology. The intel gpu is not present.
-- Package-specific info:
** Version:
Linux version 3.10-3-amd64 (
debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-7) ) #1 SMP Debian 3.10.11-1 (2013-09-10)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.10-3-amd64 root=UUID=b35c5997-6c0b-4e6c-a0c0-93cf82a81bb1 ro quiet elevator=deadline acpi_osi= acpi_backlight=vendor nmi_watchdog=0 drm.vblankoffdelay=1 add_efi_memmap
** Not tainted
** Kernel log:
[ 2.534372] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2.534374] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.534376] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.534377] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.534379] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.534380] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.537990] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 2.551756] usb 3-1.1: new full-speed USB device number 3 using ehci-pci
[ 2.567159] [TTM] Zone kernel: Available graphics memory: 4075146 kiB
[ 2.567162] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.567163] [TTM] Initializing pool allocator
[ 2.567166] [TTM] Initializing DMA pool allocator
[ 2.567177] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 2.567179] nouveau [ DRM] VRAM: 2048 MiB
[ 2.567180] nouveau [ DRM] GART: 512 MiB
[ 2.567183] nouveau [ DRM] TMDS table version 2.0
[ 2.567185] nouveau [ DRM] DCB version 4.0
[ 2.567187] nouveau [ DRM] DCB outp 00: 04800fb6 0f430014
[ 2.567188] nouveau [ DRM] DCB outp 01: 02011f00 00000000
[ 2.567190] nouveau [ DRM] DCB outp 02: 02022f62 00020010
[ 2.567191] nouveau [ DRM] DCB conn 00: 00020047
[ 2.567193] nouveau [ DRM] DCB conn 01: 00000100
[ 2.567194] nouveau [ DRM] DCB conn 02: 00010261
[ 2.568740] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.568741] [drm] No driver support for vblank timestamp query.
[ 2.568798] nouveau W[ DRM] voltage table 0xe8 unknown
[ 2.568801] nouveau [ DRM] 0 available performance level(s)
[ 2.568802] nouveau [ DRM] c:
[ 2.579752] nouveau [ DRM] MM: using COPY for buffer copies
[ 2.624017] ACPI: Battery Slot [BAT0] (battery present)
[ 2.627951] nouveau [ DRM] allocated 2880x1620 fb: 0x80000, bo ffff880214866000
[ 2.628028] fbcon: nouveaufb (fb0) is primary device
[ 2.643353] tsc: Refined TSC clocksource calibration: 2195.012 MHz
[ 2.643355] Switching to clocksource tsc
[ 2.647766] usb 3-1.1: New USB device found, idVendor=8087, idProduct=07da
[ 2.647768] usb 3-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.655993] Bluetooth: Core ver 2.16
[ 2.656005] NET: Registered protocol family 31
[ 2.656006] Bluetooth: HCI device and connection manager initialized
[ 2.656012] Bluetooth: HCI socket layer initialized
[ 2.656014] Bluetooth: L2CAP socket layer initialized
[ 2.656021] Bluetooth: SCO socket layer initialized
[ 2.656933] usbcore: registered new interface driver btusb
[ 2.719462] usb 3-1.3: new high-speed USB device number 4 using ehci-pci
[ 2.720064] ACPI Error: [IIA0] Namespace lookup failure, AE_ALREADY_EXISTS (20130328/dsfield-211)
[ 2.720068] ACPI Error: Method parse/execution failed [\_SB_.ATKD.WMNB] (Node ffff8802160d3268), AE_ALREADY_EXISTS (20130328/psparse-537)
[ 2.720138] ACPI Error: [IIA0] Namespace lookup failure, AE_ALREADY_EXISTS (20130328/dsfield-211)
[ 2.720141] ACPI Error: Method parse/execution failed [\_SB_.ATKD.WMNB] (Node ffff8802160d3268), AE_ALREADY_EXISTS (20130328/psparse-537)
[ 2.720187] ACPI: Marking method WMNB as Serialized because of AE_ALREADY_EXISTS error
[ 2.871648] asus-nb-wmi: probe of asus-nb-wmi failed with error -5
[ 2.935550] Console: switching to colour frame buffer device 360x101
[ 2.940467] usb 3-1.3: New USB device found, idVendor=04f2, idProduct=b36e
[ 2.940468] usb 3-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.940469] usb 3-1.3: Product: USB2.0 HD UVC WebCam
[ 2.940470] usb 3-1.3: Manufacturer: Chicony Electronics Co.,Ltd.
[ 2.940471] usb 3-1.3: SerialNumber: 200901010001
[ 2.942031] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 2.942032] nouveau 0000:01:00.0: registered panic notifier
[ 2.942035] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[ 2.942109] hda_intel: Disabling MSI
[ 2.942115] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 2.961204] media: Linux media interface: v0.10
[ 2.963165] Linux video capture interface: v2.00
[ 2.966568] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b36e)
[ 2.977605] input: USB2.0 HD UVC WebCam as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input8
[ 2.977673] usbcore: registered new interface driver uvcvideo
[ 2.977674] USB Video Class driver (1.1.1)
[ 3.009314] psmouse serio4: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 3.206821] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f02)
[ 3.220415] psmouse serio4: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0e.
[ 3.289161] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input9
[ 3.312100] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:
01.0/0000:01:00.1/sound/card1/input10
[ 3.580681] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 3.615698] EXT4-fs (sda2): re-mounted. Opts: discard,errors=remount-ro
[ 3.744003] fuse init (API version 7.22)
[ 3.797126] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 3.813501] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: discard
[ 4.296752] Bluetooth: RFCOMM TTY layer initialized
[ 4.296761] Bluetooth: RFCOMM socket layer initialized
[ 4.296762] Bluetooth: RFCOMM ver 1.11
[ 4.299259] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.299262] Bluetooth: BNEP filters: protocol multicast
[ 4.299271] Bluetooth: BNEP socket layer initialized
[ 4.326298] lp: driver loaded but no devices found
[ 4.330927] ppdev: user-space parallel port driver
[ 4.441171] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 4.448385] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0
[ 4.968342] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 4.975347] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0
[ 5.153586] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
[ 5.345206] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5.355586] atl1c 0000:04:00.0: irq 47 for MSI/MSI-X
[ 5.379344] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.283826] wlan0: authenticate with 00:c0:ca:57:83:92
[ 23.294011] wlan0: send auth to 00:c0:ca:57:83:92 (try 1/3)
[ 23.297707] wlan0: authenticated
[ 23.300913] wlan0: associate with 00:c0:ca:57:83:92 (try 1/3)
[ 23.304530] wlan0: RX AssocResp from 00:c0:ca:57:83:92 (capab=0x411 status=0 aid=2)
[ 23.319212] wlan0: associated
[ 23.319235] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
** Model information
sys_vendor: ASUSTeK COMPUTER INC.
product_name: UX51VZH
product_version: 1.0
chassis_vendor: ASUSTeK COMPUTER INC.
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: UX51VZH.207
board_vendor: ASUSTeK COMPUTER INC.
board_name: UX51VZH
board_version: 1.0
** Loaded modules:
parport_pc
ppdev
lp
parport
bnep
rfcomm
binfmt_misc
uinput
nls_utf8
nls_cp437
vfat
fat
fuse
joydev
snd_hda_codec_hdmi
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
videodev
media
btusb
bluetooth
coretemp
kvm_intel
kvm
arc4
crc32c_intel
ghash_clmulni_intel
iwldvm
asus_wmi
sparse_keymap
mac80211
iTCO_wdt
efi_pstore
iTCO_vendor_support
aesni_intel
aes_x86_64
snd_hda_codec_realtek
nouveau
ablk_helper
cryptd
lrw
mxm_wmi
gf128mul
glue_helper
ttm
snd_hda_intel
iwlwifi
pcspkr
drm_kms_helper
microcode
snd_hda_codec
psmouse
snd_hwdep
drm
efivars
snd_pcm
cfg80211
serio_raw
i2c_i801
evdev
snd_page_alloc
i2c_algo_bit
snd_seq
rfkill
i2c_core
snd_seq_device
mperf
snd_timer
lpc_ich
mfd_core
snd
wmi
battery
video
mei_me
ac
processor
button
mei
soundcore
ext4
crc16
jbd2
mbcache
sg
sd_mod
crc_t10dif
ahci
libahci
libata
atl1c
scsi_mod
ehci_pci
ehci_hcd
xhci_hcd
usbcore
usb_common
thermal
thermal_sys
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09)
Subsystem: ASUSTeK Computer Inc. Device [1043:15a7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f6000000-f70fffff
Prefetchable memory behind bridge: 00000000e0000000-00000000f1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:15a7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f7300000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:15a7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f731b000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:15a7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7318000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:15a7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f7310000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f7200000-f72fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 [8086:1e16] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7100000-f71fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:15a7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7317000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM77 Express Chipset LPC Controller [8086:1e57] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:15a7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:15a7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 43
Region 0: I/O ports at f070 [size=8]
Region 1: I/O ports at f060 [size=4]
Region 2: I/O ports at f050 [size=8]
Region 3: I/O ports at f040 [size=4]
Region 4: I/O ports at f020 [size=32]
Region 5: Memory at f7316000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:15a7]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7315000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f000 [size=32]
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK107M [GeForce GT 650M] [10de:0fd1] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. GeForce GT 650M [1043:2141]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at e000 [size=128]
Expansion ROM at f7000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
01:00.1 Audio device [0403]: NVIDIA Corporation GK107 HDMI Audio Controller [10de:0e1b] (rev a1)
Subsystem: NVIDIA Corporation GK107 HDMI Audio Controller [10de:0e1b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f7080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
03:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6235 [8086:088e] (rev 24)
Subsystem: Intel Corporation Centrino Advanced-N 6235 AGN [8086:4060]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f7200000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
04:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0)
Subsystem: ASUSTeK Computer Inc. Device [1043:15a7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f7100000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at d000 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c
** USB devices:
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 04f2:b36e Chicony Electronics Co., Ltd
Bus 003 Device 003: ID 8087:07da Intel Corp.
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.10-3-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.10-3-amd64 depends on:
ii debconf [debconf-2.0] 1.5.51
ii initramfs-tools [linux-initramfs-tool] 0.114
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.10-3-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.10-3-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | extlinux | lilo <none>
pn linux-doc-3.10 <none>
Versions of packages linux-image-3.10-3-amd64 is related to:
ii firmware-atheros 0.40
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.40
pn firmware-libertas <none>
ii firmware-linux 0.40
ii firmware-linux-nonfree 0.40
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.10-3-amd64/postinst/missing-firmware-3.10-3-amd64:
linux-image-3.10-3-amd64/postinst/ignoring-ramdisk:
linux-image-3.10-3-amd64/postinst/depmod-error-initrd-3.10-3-amd64: false
linux-image-3.10-3-amd64/prerm/removing-running-kernel-3.10-3-amd64: true