Bug#980214: linux-image-5.10.0-1-arm64: please enable CONFIG_CRYPTO_NHPOLY1305_NEON
Package: src:linux
Version: 5.10.4-1
Severity: normal
Dear Maintainer,
Please enable CONFIG_CRYPTO_NHPOLY1305_NEON as a module for arm64 builds of
the Linux kernel. This allows platforms that do not support AES instructions
(such as Raspberry Pi 3/4) to enable efficient block device encryption, using
the 'adiantum' template.
Kind regards,
Ard.
-- Package-specific info:
** Version:
Linux version 5.10.0-1-arm64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-3) 10.2.1 20201224, GNU ld (GNU Binutils for Debian) 2.35.1) #1 SMP Debian 5.10.4-1 (2020-12-31)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-5.10.0-1-arm64 root=UUID=62fa7565-f531-4b0f-9311-59cb70ba2c93 ro quiet
** Not tainted
** Kernel log:
[ 3.822227] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 3.822239] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.822247] usb usb1: Product: xHCI Host Controller
[ 3.822254] usb usb1: Manufacturer: Linux 5.10.0-1-arm64 xhci-hcd
[ 3.822261] usb usb1: SerialNumber: PNP0D10:00
[ 3.822910] hub 1-0:1.0: USB hub found
[ 3.822979] hub 1-0:1.0: 1 port detected
[ 3.823542] xhci-hcd PNP0D10:00: xHCI Host Controller
[ 3.823572] xhci-hcd PNP0D10:00: new USB bus registered, assigned bus number 2
[ 3.823591] xhci-hcd PNP0D10:00: Host supports USB 3.0 SuperSpeed
[ 3.823752] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.823936] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 3.823945] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.823953] usb usb2: Product: xHCI Host Controller
[ 3.823960] usb usb2: Manufacturer: Linux 5.10.0-1-arm64 xhci-hcd
[ 3.823966] usb usb2: SerialNumber: PNP0D10:00
[ 3.824623] hub 2-0:1.0: USB hub found
[ 3.824677] hub 2-0:1.0: 4 ports detected
[ 3.838859] bcmgenet BCM6E4E:00 enabcm6e4ei0: renamed from eth0
[ 4.157943] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 4.312580] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[ 4.312595] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.312603] usb 1-1: Product: USB2.0 Hub
[ 4.314265] hub 1-1:1.0: USB hub found
[ 4.314540] hub 1-1:1.0: 4 ports detected
[ 4.438232] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 4.460809] usb 2-2: New USB device found, idVendor=18a5, idProduct=0237, bcdDevice= 5.10
[ 4.460819] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.460827] usb 2-2: Product: Portable USB 3.0 Drive
[ 4.460835] usb 2-2: Manufacturer: Verbatim
[ 4.460842] usb 2-2: SerialNumber: 1407010003245394
[ 4.498931] SCSI subsystem initialized
[ 4.513467] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 4.514813] scsi host0: usb-storage 2-2:1.0
[ 4.515356] usbcore: registered new interface driver usb-storage
[ 4.520563] usbcore: registered new interface driver uas
[ 4.673929] libphy: bcmgenet MII bus: probed
[ 4.673945] unimac-mdio unimac-mdio: Broadcom UniMAC MDIO bus
[ 5.535323] scsi 0:0:0:0: Direct-Access Samsung SSD 850 PRO EXM0 PQ: 0 ANSI: 6
[ 5.556933] sd 0:0:0:0: [sda] 500118188 512-byte logical blocks: (256 GB/238 GiB)
[ 5.557351] sd 0:0:0:0: [sda] Write Protect is off
[ 5.557362] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 5.557768] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.576531] sda: sda1 sda2
[ 5.578991] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.612373] random: fast init done
[ 6.084383] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.358453] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 6.530927] systemd[1]: Inserted module 'autofs4'
[ 6.593403] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 6.594215] systemd[1]: Detected architecture arm64.
[ 6.622998] systemd[1]: Set hostname to <rpi4>.
[ 7.062138] random: systemd: uninitialized urandom read (16 bytes read)
[ 7.067659] random: systemd: uninitialized urandom read (16 bytes read)
[ 7.071927] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 7.072502] random: systemd: uninitialized urandom read (16 bytes read)
[ 7.072985] systemd[1]: Listening on Journal Audit Socket.
[ 7.073615] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.075141] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 7.076570] systemd[1]: Created slice User and Session Slice.
[ 7.076698] systemd[1]: Reached target Slices.
[ 7.077261] systemd[1]: Listening on udev Kernel Socket.
[ 7.230826] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 7.446370] systemd-journald[220]: Received request to flush runtime journal from PID 1
[ 7.956977] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.064863] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 8.140177] cryptd: max_cpu_qlen set to 1000
[ 8.572745] random: crng init done
[ 8.572758] random: 7 urandom warning(s) missed due to ratelimiting
[ 8.626854] Bluetooth: Core ver 2.22
[ 8.627007] NET: Registered protocol family 31
[ 8.627015] Bluetooth: HCI device and connection manager initialized
[ 8.628647] Bluetooth: HCI socket layer initialized
[ 8.628663] Bluetooth: L2CAP socket layer initialized
[ 8.628699] Bluetooth: SCO socket layer initialized
[ 8.702144] Bluetooth: HCI UART driver ver 2.3
[ 8.702159] Bluetooth: HCI UART protocol H4 registered
[ 8.702296] Bluetooth: HCI UART protocol LL registered
[ 8.702304] Bluetooth: HCI UART protocol ATH3K registered
[ 8.702367] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 8.702570] Bluetooth: HCI UART protocol Intel registered
[ 8.702882] Bluetooth: HCI UART protocol Broadcom registered
[ 8.702953] Bluetooth: HCI UART protocol QCA registered
[ 8.702960] Bluetooth: HCI UART protocol AG6XX registered
[ 8.703006] Bluetooth: HCI UART protocol Marvell registered
[ 8.764517] audit: type=1400 audit(1604510514.143:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=426 comm="apparmor_parser"
[ 8.764549] audit: type=1400 audit(1604510514.143:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=426 comm="apparmor_parser"
[ 8.765026] audit: type=1400 audit(1604510514.151:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=427 comm="apparmor_parser"
[ 8.765048] audit: type=1400 audit(1604510514.151:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=427 comm="apparmor_parser"
[ 8.765065] audit: type=1400 audit(1604510514.151:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=427 comm="apparmor_parser"
[ 8.783189] audit: type=1400 audit(1604510514.171:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/aarch64-linux-gnu/lightdm/lightdm-guest-session" pid=425 comm="apparmor_parser"
[ 8.783216] audit: type=1400 audit(1604510514.171:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/aarch64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=425 comm="apparmor_parser"
[ 9.501478] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 9.501491] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 9.914262] bcmgenet BCM6E4E:00: configuring instance for external RGMII (RX delay)
[ 9.914619] bcmgenet BCM6E4E:00 enabcm6e4ei0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 9.914849] IPv6: ADDRCONF(NETDEV_CHANGE): enabcm6e4ei0: link becomes ready
[ 10.175742] NET: Registered protocol family 5
[142340.069707] tun: Universal TUN/TAP device driver, 1.6
[1173543.653652] NET: Registered protocol family 38
** Model information
** Loaded modules:
nhpoly1305
adiantum
libpoly1305
ecb
xts
twofish_generic
twofish_common
serpent_generic
cbc
algif_skcipher
af_alg
tun
appletalk
psnap
llc
wireguard
libchacha20poly1305
chacha_neon
poly1305_neon
ip6_udp_tunnel
udp_tunnel
libblake2s
libcurve25519_generic
libchacha
libblake2s_generic
nft_counter
nft_chain_nat
xt_MASQUERADE
nf_nat
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
nft_compat
nf_tables
libcrc32c
hci_uart
nfnetlink
btqca
btrtl
btbcm
btintel
bluetooth
nls_ascii
nls_cp437
vfat
fat
jitterentropy_rng
aes_neon_bs
aes_neon_blk
crypto_simd
cryptd
drbg
aes_arm64
aes_generic
ansi_cprng
sg
ecdh_generic
rfkill
ecc
libaes
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
sd_mod
t10_pi
crc_t10dif
crct10dif_generic
uas
usb_storage
scsi_mod
broadcom
bcm_phy_lib
mdio_bcm_unimac
xhci_plat_hcd
xhci_hcd
genet
of_mdio
crct10dif_ce
fixed_phy
usbcore
crct10dif_common
libphy
usb_common
** PCI devices:
** USB devices:
Bus 002 Device 002: ID 18a5:0237 Verbatim, Ltd Portable Harddrive
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 10.7
APT prefers stable
APT policy: (500, 'stable')
Architecture: arm64 (aarch64)
Kernel: Linux 5.10.0-1-arm64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.10.0-1-arm64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133+deb10u1
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-5.10.0-1-arm64 recommends:
ii apparmor 2.13.2-10
ii firmware-linux-free 3.4
Versions of packages linux-image-5.10.0-1-arm64 suggests:
pn debian-kernel-handbook <none>
pn linux-doc-5.10 <none>
Versions of packages linux-image-5.10.0-1-arm64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: