Bug#949815: linux-image-4.19.0: lost hotplug functionality in promise 300 TX4 (product: PDC40718)
Package: src:linux
Version: 4.19.67-2+deb10u2
Severity: normal
File: linux-image-4.19.0
Tags: upstream
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
Using hardware promise 300 TX4
lshw output:
*-storage
description: Mass storage controller
product: PDC40718 (SATA 300 TX4)
vendor: Promise Technology, Inc.
physical id: 3
bus info: pci@0000:03:03.0
logical name: scsi2
logical name: scsi3
logical name: scsi4
version: 02
width: 32 bits
clock: 66MHz
capabilities: storage pm bus_master cap_list rom emulated
configuration: driver=sata_promise latency=72 maxlatency=18
mingnt=4
This Sata hba usually provided good hot plug functionality to SATA drives.
Booting kernels in Debian Buster all show the error.
It seems, that all kernels are concerned. At least the default
kernel (linux-image-4.19.0) in 32 and 64 bit and the backport
kernel in 32 bit(5.3.0-0.bpo.2-686) have been tested explicitly.
* What exactly did you do (or not do) that was effective (or
ineffective)?
logs when plugging a Drive in:
5.3.0-0.bpo.2-686 hotplug no:
Jan 11 23:06:25 host1 kernel: [ 82.677497] ata1: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
Jan 11 23:06:25 host1 kernel: [ 82.680204] ata1.00: ATA-8:
ST500DM002-1BD142, KC65, max UDMA/100
Jan 11 23:06:25 host1 kernel: [ 82.680206] ata1.00: 976773168 sectors,
multi 0: LBA48 NCQ (depth 0/32)
Jan 11 23:06:25 host1 kernel: [ 82.685111] ata1.00: configured for
UDMA/100
########################
linux-image-4.19.0-6-686
4.19.0-6-686 hotplug no:
Jan 11 18:47:25 host1 kernel: [ 76.418588] ata4: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
Jan 11 18:47:25 host1 kernel: [ 76.421293] ata4.00: ATA-8:
ST500DM002-1BD142, KC65, max UDMA/100
Jan 11 18:47:25 host1 kernel: [ 76.421295] ata4.00: 976773168 sectors,
multi 0: LBA48 NCQ (depth 0/32)
Jan 11 18:47:25 host1 kernel: [ 76.426194] ata4.00: configured for
UDMA/100
* What was the outcome of this action?
All Drives I plugged in did not show up. e.g. by using
fdisk -l
Only when I plug in the drive(s) before booting, they show up.
* What outcome did you expect instead?
Usually drives show up a few seconds after pugging in. (fdisk -l)
and are usable. It works with all kernels in stretch and before.
This results in being forced to use the old stretch kernel
4.9.0-11 in all those buster-boxes. For this functionality the
kernel module "sata_promise" is loaded.
I also tested the hardware in a arch-box with kernel 5.4.13-arch1.
This did show the expected behaviour in showing up the drives in
fdisk immediatetly.
Example of log output of a successfull operation in with a
"stretch"-kernel:
4.9.0-11-686 hotplug ok:
32bit:
Jan 11 18:44:09 host1 kernel: [ 2190.584410] ata4: exception Emask 0x10
SAct 0x0 SErr 0x4010000 action 0xe frozen
Jan 11 18:44:09 host1 kernel: [ 2190.584415] ata4: hotplug_status 0x20
Jan 11 18:44:09 host1 kernel: [ 2190.584419] ata4: SError: { PHYRdyChg
DevExch }
Jan 11 18:44:09 host1 kernel: [ 2190.584429] ata4: hard resetting link
Jan 11 18:44:10 host1 kernel: [ 2191.460040] ata4: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
Jan 11 18:44:10 host1 kernel: [ 2191.462745] ata4.00: ATA-8:
ST500DM002-1BD142, KC65, max UDMA/100
Jan 11 18:44:10 host1 kernel: [ 2191.462748] ata4.00: 976773168 sectors,
multi 0: LBA48 NCQ (depth 0/32)
Jan 11 18:44:10 host1 kernel: [ 2191.467648] ata4.00: configured for
UDMA/100
Jan 11 18:44:10 host1 kernel: [ 2191.467653] ata4: EH complete
Jan 11 18:44:10 host1 kernel: [ 2191.467810] scsi 3:0:0:0: Direct-Access
ATA ST500DM002-1BD14 KC65 PQ: 0 ANSI: 5
Jan 11 18:44:10 host1 kernel: [ 2191.496298] sd 3:0:0:0: [sdg] 976773168
512-byte logical blocks: (500 GB/466 GiB)
Jan 11 18:44:10 host1 kernel: [ 2191.496301] sd 3:0:0:0: [sdg] 4096-byte
physical blocks
Jan 11 18:44:10 host1 kernel: [ 2191.496359] sd 3:0:0:0: [sdg] Write
Protect is off
Jan 11 18:44:10 host1 kernel: [ 2191.496363] sd 3:0:0:0: [sdg] Mode Sense:
00 3a 00 00
Jan 11 18:44:10 host1 kernel: [ 2191.496389] sd 3:0:0:0: [sdg] Write
cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 11 18:44:10 host1 kernel: [ 2191.497218] sd 3:0:0:0: Attached scsi
generic sg6 type 0
Jan 11 18:44:10 host1 kernel: [ 2191.510407] sd 3:0:0:0: [sdg] Attached
SCSI disk
64bit:
Jan 11 19:06:14 localhost kernel: [ 189.709292] ata4: exception Emask
0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen
Jan 11 19:06:14 localhost kernel: [ 189.709305] ata4: hotplug_status 0x20
Jan 11 19:06:14 localhost kernel: [ 189.709312] ata4: SError: { PHYRdyChg
DevExch }
Jan 11 19:06:14 localhost kernel: [ 189.709325] ata4: hard resetting link
Jan 11 19:06:15 localhost kernel: [ 190.580042] ata4: SATA link up 3.0
Gbps (SStatus 123 SControl 300)
Jan 11 19:06:15 localhost kernel: [ 190.582745] ata4.00: ATA-8:
ST500DM002-1BD142, KC65, max UDMA/100
Jan 11 19:06:15 localhost kernel: [ 190.582748] ata4.00: 976773168
sectors, multi 0: LBA48 NCQ (depth 0/32)
Jan 11 19:06:15 localhost kernel: [ 190.587646] ata4.00: configured for
UDMA/100
Jan 11 19:06:15 localhost kernel: [ 190.587651] ata4: EH complete
Jan 11 19:06:15 localhost kernel: [ 190.587828] scsi 3:0:0:0: Direct-
Access ATA ST500DM002-1BD14 KC65 PQ: 0 ANSI: 5
Jan 11 19:06:15 localhost kernel: [ 190.616261] sd 3:0:0:0: [sdh]
976773168 512-byte logical blocks: (500 GB/466 GiB)
Jan 11 19:06:15 localhost kernel: [ 190.616264] sd 3:0:0:0: [sdh]
4096-byte physical blocks
Jan 11 19:06:15 localhost kernel: [ 190.616321] sd 3:0:0:0: [sdh] Write
Protect is off
Jan 11 19:06:15 localhost kernel: [ 190.616325] sd 3:0:0:0: [sdh] Mode
Sense: 00 3a 00 00
Jan 11 19:06:15 localhost kernel: [ 190.616351] sd 3:0:0:0: [sdh] Write
cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 11 19:06:15 localhost kernel: [ 190.617291] sd 3:0:0:0: Attached scsi
generic sg7 type 0
Jan 11 19:06:15 localhost kernel: [ 190.632275] sd 3:0:0:0: [sdh]
Attached SCSI disk
-- Package-specific info:
** Version:
Linux version 4.19.0-6-686 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u2 (2019-11-11)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-686 root=/dev/sda1 ro quiet
** Not tainted
** Kernel log:
Unable to read kernel log; any relevant messages should be attached
** Model information
** Loaded modules:
fuse
ctr
ccm
arc4
i915
ath5k
ath
mac80211
snd_intel8x0
snd_intel8x0m
snd_ac97_codec
ac97_bus
drm_kms_helper
snd_pcm_oss
pcmcia
snd_mixer_oss
pcspkr
snd_pcm
cfg80211
serio_raw
drm
snd_timer
evdev
iTCO_wdt
thinkpad_acpi
iTCO_vendor_support
yenta_socket
sg
i2c_algo_bit
rng_core
pcmcia_rsrc
fb_sys_fops
nvram
pcmcia_core
syscopyarea
sysfillrect
snd
sysimgblt
soundcore
rfkill
battery
video
ac
pcc_cpufreq
acpi_cpufreq
button
sunrpc
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
fscrypto
ecb
crypto_simd
cryptd
aes_i586
raid10
hid_generic
raid456
usbhid
async_raid6_recov
hid
async_memcpy
async_pq
async_xor
async_tx
xor
raid6_pq
libcrc32c
crc32c_generic
raid1
raid0
multipath
linear
md_mod
sd_mod
ata_generic
ata_piix
libata
uhci_hcd
ehci_pci
ehci_hcd
sdhci_pci
cqhci
usbcore
scsi_mod
sdhci
psmouse
e1000
mmc_core
i2c_i801
lpc_ich
thermal
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3580] (rev 02)
Subsystem: IBM ThinkPad R50e [1014:055c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at <unassigned> (32-bit, prefetchable)
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:00.1 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3584] (rev 02)
Subsystem: IBM ThinkPad R50e [1014:055d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.3 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3585] (rev 02)
Subsystem: IBM ThinkPad R50e [1014:055e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.0 VGA compatible controller [0300]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02) (prog-if 00 [VGA controller])
Subsystem: IBM 82852/855GM Integrated Graphics Device [1014:0557]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at 1800 [size=8]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:02.1 Display controller [0380]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02)
Subsystem: IBM 82852/855GM Integrated Graphics Device [1014:0557]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at d0080000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
Kernel modules: i915
00:1d.0 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) (prog-if 00 [UHCI])
Subsystem: IBM ThinkPad [1014:052d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) (prog-if 00 [UHCI])
Subsystem: IBM ThinkPad [1014:052d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01) (prog-if 00 [UHCI])
Subsystem: IBM ThinkPad [1014:052d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01) (prog-if 20 [EHCI])
Subsystem: IBM ThinkPad [1014:052e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at d0100000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 81) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=05, sec-latency=168
I/O behind bridge: 00003000-00007fff
Memory behind bridge: d0200000-dfffffff
Prefetchable memory behind bridge: f0000000-f7ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: lpc_ich
Kernel modules: intel_rng, lpc_ich
00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 01) (prog-if 8a [ISA Compatibility mode controller, supports both channels switched to PCI native mode, supports bus mastering])
Subsystem: IBM ThinkPad [1014:052d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 1810 [size=16]
Region 5: Memory at 60000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic
00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 01)
Subsystem: IBM ThinkPad [1014:052d]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01)
Subsystem: IBM 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [1014:0558]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 18c0 [size=64]
Region 2: Memory at d0100c00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at d0100800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: snd_intel8x0
Kernel modules: snd_intel8x0
00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 01) (prog-if 00 [Generic])
Subsystem: IBM ThinkPad R50e [1014:0559]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 2400 [size=256]
Region 1: I/O ports at 2000 [size=128]
Capabilities: <access denied>
Kernel driver in use: snd_intel8x0m
Kernel modules: snd_intel8x0m
02:00.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev 8d)
Subsystem: IBM ThinkPad X41 [1014:0555]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 16
Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=04, sec-latency=176
Memory window 0: f0000000-f3ffffff (prefetchable)
Memory window 1: d4000000-d7ffffff
I/O window 0: 00003000-000030ff
I/O window 1: 00003400-000034ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Capabilities: <access denied>
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
02:00.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 13)
Subsystem: IBM ThinkPad X40 / X41 / X60s / Z60t [1014:0556]
Physical Slot: 1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d0210000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci
02:01.0 Ethernet controller [0200]: Intel Corporation 82541GI Gigabit Ethernet Controller [8086:1077]
Subsystem: IBM 82541GI Gigabit Ethernet Controller [1014:055b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d0220000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 7000 [size=64]
Capabilities: <access denied>
Kernel driver in use: e1000
Kernel modules: e1000
02:02.0 Ethernet controller [0200]: Qualcomm Atheros AR5212 802.11abg NIC [168c:1014] (rev 01)
Subsystem: Phillips Components AR5212 802.11abg NIC [17ab:8331]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath5k
Kernel modules: ath5k
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 046d:c019 Logitech, Inc. Optical Tilt Wheel Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 10.2
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 4.19.0-6-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-6-686 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133+deb10u1
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-4.19.0-6-686 recommends:
ii apparmor 2.13.2-10
ii firmware-linux-free 3.4
Versions of packages linux-image-4.19.0-6-686 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02+dfsg1-20
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-6-686 is related to:
ii firmware-amd-graphics 20190114-2
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20190114-2
ii firmware-misc-nonfree 20190114-2
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: