[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#919227: dmesg output with patched kernel



As recommended by upstream bug 192231 I have rebuilt the kernel with a debugging patch and here is the output of dmesg when triggering the issue.
[    0.000000] Linux version 4.19.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 8.2.0 (Debian 8.2.0-14)) #1 SMP Debian 4.19.12-1a~test (2019-01-13)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-1-amd64 root=UUID=e19e81ac-9618-4735-8a7c-bff7f48b50cb ro resume=UUID=3464e393-b3d3-49c3-a1e0-858d6123f7c3 button.lid_init_state=open quiet
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f67ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f680000-0x000000007f68dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f68e000-0x000000007f6cffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f6d0000-0x000000007f6fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: ASUSTeK Computer INC. 1215P/1215P, BIOS 0601    04/18/2011
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x7f680 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F700000 mask FFFF00000 uncachable
[    0.000000]   2 base 07F800000 mask FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [(____ptrval____)]
[    0.000000] Base memory trampoline at [(____ptrval____)] 99000 size 24576
[    0.000000] BRK [0x55201000, 0x55201fff] PGTABLE
[    0.000000] BRK [0x55202000, 0x55202fff] PGTABLE
[    0.000000] BRK [0x55203000, 0x55203fff] PGTABLE
[    0.000000] BRK [0x55204000, 0x55204fff] PGTABLE
[    0.000000] BRK [0x55205000, 0x55205fff] PGTABLE
[    0.000000] BRK [0x55206000, 0x55206fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3532d000-0x3698dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FBF30 000024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 0x000000007F680100 000064 (v01 A_M_I_ OEMXSDT  04001118 MSFT 00000097)
[    0.000000] ACPI: FACP 0x000000007F680290 0000F4 (v04 A_M_I_ OEMFACP  04001118 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x000000007F6804A0 008D70 (v02 A1724  A1724000 00000000 INTL 20060113)
[    0.000000] ACPI: FACS 0x000000007F68E000 000040
[    0.000000] ACPI: FACS 0x000000007F68E000 000040
[    0.000000] ACPI: APIC 0x000000007F680390 00006C (v02 A_M_I_ OEMAPIC  04001118 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x000000007F680400 00003C (v01 A_M_I_ OEMMCFG  04001118 MSFT 00000097)
[    0.000000] ACPI: ECDT 0x000000007F680440 000055 (v01 A_M_I_ OEMECDT  04001118 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x000000007F68E040 000061 (v01 A_M_I_ AMI_OEM  04001118 MSFT 00000097)
[    0.000000] ACPI: HPET 0x000000007F689210 000038 (v01 A_M_I_ OEMHPET  04001118 MSFT 00000097)
[    0.000000] ACPI: GSCI 0x000000007F68E0B0 002024 (v01 A_M_I_ GMCHSCI  04001118 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x000000007F690F00 000999 (v01 PmRef  CpuPm4   00003000 INTL 20060113)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007f67ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x7f67b000-0x7f67ffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007f67ffff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007f67ffff]
[    0.000000] Reserved but unavailable: 98 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f67ffff]
[    0.000000] On node 0 totalpages: 521758
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8090 pages used for memmap
[    0.000000]   DMA32 zone: 517760 pages, LIFO batch:63
[    0.000000] Reserving Intel graphics memory at [mem 0x7f800000-0x7fffffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] [mem 0x80000000-0xfedfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x93/0x537 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 44 pages/cpu @(____ptrval____) s143192 r8192 d28840 u524288
[    0.000000] pcpu-alloc: s143192 r8192 d28840 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 513583
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-1-amd64 root=UUID=e19e81ac-9618-4735-8a7c-bff7f48b50cb ro resume=UUID=3464e393-b3d3-49c3-a1e0-858d6123f7c3 button.lid_init_state=open quiet
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2004252K/2087032K available (10252K kernel code, 1236K rwdata, 3192K rodata, 1572K init, 2332K bss, 82780K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 31610 entries in 124 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180810
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.028000] tsc: PIT calibration matches HPET. 2 loops
[    0.028000] tsc: Detected 1664.813 MHz processor
[    0.000023] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x17ff4f59146, max_idle_ns: 440795218065 ns
[    0.000043] Calibrating delay loop (skipped), value calculated using timer frequency.. 3329.62 BogoMIPS (lpj=6659252)
[    0.000051] pid_max: default: 32768 minimum: 301
[    0.000178] Security Framework initialized
[    0.000182] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.000236] AppArmor: AppArmor initialized
[    0.001718] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.003383] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.003481] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.003509] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.004296] mce: CPU supports 5 MCE banks
[    0.004308] CPU0: Thermal monitoring enabled (TM2)
[    0.004313] process: using mwait in idle threads
[    0.004322] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.004324] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[    0.004631] Freeing SMP alternatives memory: 24K
[    0.012028] smpboot: CPU0: Intel(R) Atom(TM) CPU N570   @ 1.66GHz (family: 0x6, model: 0x1c, stepping: 0xa)
[    0.012028] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver.
[    0.012028] ... version:                3
[    0.012028] ... bit width:              40
[    0.012028] ... generic registers:      2
[    0.012028] ... value mask:             000000ffffffffff
[    0.012028] ... max period:             000000007fffffff
[    0.012028] ... fixed-purpose events:   3
[    0.012028] ... event mask:             0000000700000003
[    0.012028] rcu: Hierarchical SRCU implementation.
[    0.012028] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.012028] smp: Bringing up secondary CPUs ...
[    0.012028] x86: Booting SMP configuration:
[    0.012028] .... node  #0, CPUs:      #1
[    0.000000] Disabled fast string operations
[    0.012411]  #2
[    0.000000] Disabled fast string operations
[    0.016422]  #3
[    0.000000] Disabled fast string operations
[    0.018570] TSC synchronization [CPU#0 -> CPU#3]:
[    0.018573] Measured 110 cycles TSC warp between CPUs, turning off TSC clock.
[    0.018577] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[    0.018591] smp: Brought up 1 node, 4 CPUs
[    0.018591] smpboot: Max logical packages: 1
[    0.018591] smpboot: Total of 4 processors activated (13318.50 BogoMIPS)
[    0.020759] devtmpfs: initialized
[    0.020759] x86/mm: Memory block size: 128MB
[    0.021270] PM: Registering ACPI NVS region [mem 0x7f68e000-0x7f6cffff] (270336 bytes)
[    0.021270] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.021270] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.021270] pinctrl core: initialized pinctrl subsystem
[    0.024159] NET: Registered protocol family 16
[    0.024499] audit: initializing netlink subsys (disabled)
[    0.024542] audit: type=2000 audit(1548004636.052:1): state=initialized audit_enabled=0 res=1
[    0.024542] cpuidle: using governor ladder
[    0.024542] cpuidle: using governor menu
[    0.024542] ACPI: bus type PCI registered
[    0.024542] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.024542] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.024542] PCI: not using MMCONFIG
[    0.024542] PCI: Using configuration type 1 for base access
[    0.024542] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.024542] mtrr: probably your BIOS does not setup all CPUs.
[    0.024542] mtrr: corrected configuration.
[    0.028809] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.028809] ACPI: Added _OSI(Module Device)
[    0.028809] ACPI: Added _OSI(Processor Device)
[    0.028809] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.028809] ACPI: Added _OSI(Processor Aggregator Device)
[    0.028809] ACPI: Added _OSI(Linux-Dell-Video)
[    0.028809] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.028809] ACPI: EC: EC started
[    0.028809] ACPI: EC: interrupt blocked
[    0.028809] ACPI: \: Used as first EC
[    0.028809] ACPI: \: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.028809] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.044279] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.056593] ACPI: Dynamic OEM Table Load:
[    0.056610] ACPI: SSDT 0xFFFF95637C73DC00 000326 (v01 PmRef  Cpu0Ist  00003000 INTL 20060113)
[    0.058171] ACPI: Dynamic OEM Table Load:
[    0.058188] ACPI: SSDT 0xFFFF95637C6E9000 000724 (v01 PmRef  Cpu0Cst  00003001 INTL 20060113)
[    0.059429] ACPI: Dynamic OEM Table Load:
[    0.059441] ACPI: SSDT 0xFFFF95637C6DB480 0000AB (v01 PmRef  Cpu1Ist  00003000 INTL 20060113)
[    0.059858] ACPI: Dynamic OEM Table Load:
[    0.059868] ACPI: SSDT 0xFFFF95637C6DB180 000085 (v01 PmRef  Cpu1Cst  00003000 INTL 20060113)
[    0.060648] ACPI: Dynamic OEM Table Load:
[    0.060660] ACPI: SSDT 0xFFFF95637C6DBD80 0000AB (v01 PmRef  Cpu2Ist  00003000 INTL 20060113)
[    0.061075] ACPI: Dynamic OEM Table Load:
[    0.061088] ACPI: SSDT 0xFFFF95637C6DB780 000085 (v01 PmRef  Cpu2Cst  00003000 INTL 20060113)
[    0.061865] ACPI: Dynamic OEM Table Load:
[    0.061877] ACPI: SSDT 0xFFFF95637C6DBC00 0000AB (v01 PmRef  Cpu3Ist  00003000 INTL 20060113)
[    0.062293] ACPI: Dynamic OEM Table Load:
[    0.062304] ACPI: SSDT 0xFFFF95637C6DBCC0 000085 (v01 PmRef  Cpu3Cst  00003000 INTL 20060113)
[    0.063001] ACPI: Interpreter enabled
[    0.063059] ACPI: (supports S0 S3 S4 S5)
[    0.063063] ACPI: Using IOAPIC for interrupt routing
[    0.063165] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.064572] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.064630] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.065179] ACPI: Enabled 5 GPEs in block 00 to 1F
[    0.079372] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.083057] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.083073] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.083087] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.083682] PCI host bridge to bus 0000:00
[    0.083691] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.083697] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.083704] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.083710] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.083716] pci_bus 0000:00: root bus resource [mem 0x7f700000-0xfed8ffff window]
[    0.083723] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.083742] pci 0000:00:00.0: [8086:a010] type 00 class 0x060000
[    0.083987] pci 0000:00:02.0: [8086:a011] type 00 class 0x030000
[    0.084003] pci 0000:00:02.0: reg 0x10: [mem 0xf7e00000-0xf7e7ffff]
[    0.084011] pci 0000:00:02.0: reg 0x14: [io  0xdc00-0xdc07]
[    0.084019] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[    0.084051] pci 0000:00:02.0: reg 0x1c: [mem 0xf7d00000-0xf7dfffff]
[    0.084282] pci 0000:00:02.1: [8086:a012] type 00 class 0x038000
[    0.084297] pci 0000:00:02.1: reg 0x10: [mem 0xf7e80000-0xf7efffff]
[    0.084549] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.084579] pci 0000:00:1b.0: reg 0x10: [mem 0xf7cf8000-0xf7cfbfff 64bit]
[    0.084677] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.084890] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.084993] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.085238] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.085347] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.085585] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.085694] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.085932] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.085985] pci 0000:00:1d.0: reg 0x20: [io  0xd400-0xd41f]
[    0.086218] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.086271] pci 0000:00:1d.1: reg 0x20: [io  0xd480-0xd49f]
[    0.086491] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.086543] pci 0000:00:1d.2: reg 0x20: [io  0xd800-0xd81f]
[    0.086768] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.086820] pci 0000:00:1d.3: reg 0x20: [io  0xd880-0xd89f]
[    0.087049] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.087078] pci 0000:00:1d.7: reg 0x10: [mem 0xf7cf7c00-0xf7cf7fff]
[    0.087175] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.087388] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.087656] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[    0.088008] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[    0.088053] pci 0000:00:1f.2: reg 0x10: [io  0xd080-0xd087]
[    0.088065] pci 0000:00:1f.2: reg 0x14: [io  0xd000-0xd003]
[    0.088075] pci 0000:00:1f.2: reg 0x18: [io  0xcc00-0xcc07]
[    0.088085] pci 0000:00:1f.2: reg 0x1c: [io  0xc880-0xc883]
[    0.088096] pci 0000:00:1f.2: reg 0x20: [io  0xc800-0xc81f]
[    0.088107] pci 0000:00:1f.2: reg 0x24: [mem 0xf7cf7800-0xf7cf7bff]
[    0.088165] pci 0000:00:1f.2: PME# supported from D3hot
[    0.088410] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.089193] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.089500] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.089623] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[    0.089668] pci 0000:02:00.0: reg 0x10: [mem 0xfbff0000-0xfbffffff 64bit]
[    0.089824] pci 0000:02:00.0: supports D1
[    0.089828] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.090034] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[    0.090044] pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xfbffffff]
[    0.090052] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[    0.090173] pci 0000:01:00.0: [1969:2062] type 00 class 0x020000
[    0.090215] pci 0000:01:00.0: reg 0x10: [mem 0xf7fc0000-0xf7ffffff 64bit]
[    0.090230] pci 0000:01:00.0: reg 0x18: [io  0xec00-0xec7f]
[    0.090368] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.090570] pci 0000:00:1c.2: PCI bridge to [bus 01]
[    0.090577] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.090583] pci 0000:00:1c.2:   bridge window [mem 0xf7f00000-0xf7ffffff]
[    0.090616] pci_bus 0000:05: extended config space not accessible
[    0.090717] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.090732] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.090737] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.090741] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.090746] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.090750] pci 0000:00:1e.0:   bridge window [mem 0x7f700000-0xfed8ffff window] (subtractive decode)
[    0.092644] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.092838] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.093028] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.093216] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[    0.093404] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.093593] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.093781] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[    0.093969] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.094464] ACPI: EC: interrupt unblocked
[    0.094480] ACPI: EC: event unblocked
[    0.094493] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.094498] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.094743] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.094743] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.094743] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.094743] vgaarb: loaded
[    0.094743] pps_core: LinuxPPS API ver. 1 registered
[    0.094743] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.094743] PTP clock support registered
[    0.094743] EDAC MC: Ver: 3.0.0
[    0.094743] PCI: Using ACPI for IRQ routing
[    0.102003] PCI: pci_cache_line_size set to 64 bytes
[    0.102082] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.102087] e820: reserve RAM buffer [mem 0x7f680000-0x7fffffff]
[    0.102472] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.102472] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.102472] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.104103] clocksource: Switched to clocksource hpet
[    0.149464] VFS: Disk quotas dquot_6.6.0
[    0.149510] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.149912] AppArmor: AppArmor Filesystem Enabled
[    0.149982] pnp: PnP ACPI init
[    0.150936] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.150942] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.150960] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.151150] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.151307] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.151458] pnp 00:03: Plug and Play ACPI device, IDs SYN0a13 SYN0a00 SYN0002 PNP0f13 (active)
[    0.151958] system 00:04: [io  0x025c-0x025f] has been reserved
[    0.151963] system 00:04: [io  0x0380-0x0383] has been reserved
[    0.151968] system 00:04: [io  0x0400-0x041f] has been reserved
[    0.151973] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.151977] system 00:04: [io  0x0800-0x087f] has been reserved
[    0.151982] system 00:04: [io  0x0480-0x04bf] has been reserved
[    0.151989] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.151994] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.151999] system 00:04: [mem 0xfed50000-0xfed8ffff] has been reserved
[    0.152004] system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.152009] system 00:04: [mem 0xfff00000-0xffffffff] has been reserved
[    0.152026] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.152424] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.152430] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.152447] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.152654] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.152670] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.153284] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.153290] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.153295] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.153300] system 00:07: [mem 0x00100000-0x7f6fffff] could not be reserved
[    0.153305] system 00:07: [mem 0xfed90000-0xffffffff] could not be reserved
[    0.153321] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.153830] pnp: PnP ACPI: found 8 devices
[    0.165281] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.165323] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.165331] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.165337] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
[    0.165350] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02-03] add_size 1000
[    0.165366] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.165408] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
[    0.165421] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.165432] pci 0000:00:1c.2: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[    0.165439] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.165445] pci 0000:00:1c.1: BAR 13: assigned [io  0x2000-0x2fff]
[    0.165454] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.165460] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.165468] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff]
[    0.165474] pci 0000:00:1c.0:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.165483] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[    0.165488] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.165495] pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xfbffffff]
[    0.165501] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[    0.165509] pci 0000:00:1c.2: PCI bridge to [bus 01]
[    0.165514] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.165520] pci 0000:00:1c.2:   bridge window [mem 0xf7f00000-0xf7ffffff]
[    0.165526] pci 0000:00:1c.2:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.165536] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.165551] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.165555] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.165560] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.165564] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.165568] pci_bus 0000:00: resource 8 [mem 0x7f700000-0xfed8ffff window]
[    0.165573] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.165577] pci_bus 0000:04: resource 1 [mem 0x80000000-0x801fffff]
[    0.165581] pci_bus 0000:04: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.165585] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.165589] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[    0.165594] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf6ffffff 64bit pref]
[    0.165598] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.165602] pci_bus 0000:01: resource 1 [mem 0xf7f00000-0xf7ffffff]
[    0.165606] pci_bus 0000:01: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.165612] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.165616] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.165620] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.165625] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.165629] pci_bus 0000:05: resource 8 [mem 0x7f700000-0xfed8ffff window]
[    0.166617] NET: Registered protocol family 2
[    0.167103] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
[    0.167151] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.167284] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.167428] TCP: Hash tables configured (established 16384 bind 16384)
[    0.167598] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.167638] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.167861] NET: Registered protocol family 1
[    0.167909] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.169420] pci 0000:01:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[    0.169432] PCI: CLS 32 bytes, default 64
[    0.169587] Unpacking initramfs...
[    1.352643] Freeing initrd memory: 22916K
[    1.354888] Initialise system trusted keyrings
[    1.355087] workingset: timestamp_bits=40 max_order=19 bucket_order=0
[    1.360487] zbud: loaded
[    1.360943] pstore: using deflate compression
[    2.629992] Key type asymmetric registered
[    2.629998] Asymmetric key parser 'x509' registered
[    2.630043] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    2.630174] io scheduler noop registered
[    2.630176] io scheduler deadline registered
[    2.630310] io scheduler cfq registered (default)
[    2.630314] io scheduler mq-deadline registered
[    2.630731] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[    2.631017] pcieport 0000:00:1c.1: enabling device (0106 -> 0107)
[    2.631514] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.631571] intel_idle: MWAIT substates: 0x20220
[    2.631574] intel_idle: v0.4.1 model 0x1C
[    2.632197] intel_idle: lapic_timer_reliable_states 0x2
[    2.633210] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.634752] Linux agpgart interface v0.103
[    2.635029] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    2.635031] AMD IOMMUv2 functionality not available on this system
[    2.636878] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.654919] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.654938] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.655401] mousedev: PS/2 mouse device common for all mice
[    2.656211] rtc_cmos 00:01: RTC can wake from S4
[    2.656506] rtc_cmos 00:01: registered as rtc0
[    2.656560] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.656727] ledtrig-cpu: registered to indicate activity on CPUs
[    2.657966] NET: Registered protocol family 10
[    2.673563] Segment Routing with IPv6
[    2.673622] mip6: Mobile IPv6
[    2.673629] NET: Registered protocol family 17
[    2.673642] mpls_gso: MPLS GSO support
[    2.674423] microcode: sig=0x106ca, pf=0x10, revision=0x107
[    2.674644] microcode: Microcode Update Driver: v2.2.
[    2.675128] registered taskstats version 1
[    2.675130] Loading compiled-in X.509 certificates
[    2.676557] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.967299] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff'
[    2.967377] zswap: loaded using pool lzo/zbud
[    2.967686] AppArmor: AppArmor sha1 policy hashing enabled
[    2.968769] rtc_cmos 00:01: setting system clock to 2019-01-20 17:17:19 UTC (1548004639)
[    2.968869] Unstable clock detected, switching default tracing clock to "global"
               If you want to keep using the local clock, then add:
                 "trace_clock=local"
               on the kernel command line
[    2.974997] Freeing unused kernel image memory: 1572K
[    2.988198] Write protecting the kernel read-only data: 16384k
[    2.990510] Freeing unused kernel image memory: 2028K
[    2.991381] Freeing unused kernel image memory: 904K
[    3.019387] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.019601] Run /init as init process
[    3.294731] thermal: module verification failed: signature and/or required key missing - tainting kernel
[    3.298731] thermal LNXTHERM:00: registered as thermal_zone0
[    3.298738] ACPI: Thermal Zone [TZ00] (60 C)
[    3.306440] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\PMIO) (20180810/utaddress-213)
[    3.306465] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x000000000000082F (\_SB.PCI0.SBRG.IELK.GPSE) (20180810/utaddress-213)
[    3.306480] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.306488] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004BF (\_SB.PCI0.SBRG.GPBX) (20180810/utaddress-213)
[    3.306503] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.306509] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004BF (\_SB.PCI0.SBRG.GPBX) (20180810/utaddress-213)
[    3.306523] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.306526] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    3.319375] ACPI: bus type USB registered
[    3.320353] usbcore: registered new interface driver usbfs
[    3.320447] usbcore: registered new interface driver hub
[    3.320593] usbcore: registered new device driver usb
[    3.322666] SCSI subsystem initialized
[    3.324854] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041F conflicts with OpRegion 0x0000000000000400-0x000000000000040F (\SMRG) (20180810/utaddress-213)
[    3.324877] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041F conflicts with OpRegion 0x0000000000000400-0x000000000000040F (\_SB.PCI0.SBRG.SMRG) (20180810/utaddress-213)
[    3.324893] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.333060] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.336800] uhci_hcd: USB Universal Host Controller Interface driver
[    3.336823] ehci-pci: EHCI PCI platform driver
[    3.343109] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.343141] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    3.343164] uhci_hcd 0000:00:1d.0: detected 2 ports
[    3.343272] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[    3.344332] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    3.344339] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.344344] usb usb1: Product: UHCI Host Controller
[    3.344349] usb usb1: Manufacturer: Linux 4.19.0-1-amd64 uhci_hcd
[    3.344354] usb usb1: SerialNumber: 0000:00:1d.0
[    3.345070] hub 1-0:1.0: USB hub found
[    3.345111] hub 1-0:1.0: 2 ports detected
[    3.347058] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    3.347099] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    3.347116] libata version 3.00 loaded.
[    3.347139] ehci-pci 0000:00:1d.7: debug port 1
[    3.351113] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    3.351151] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf7cf7c00
[    3.352537] ahci 0000:00:1f.2: version 3.0
[    3.353026] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[    3.353036] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
[    3.356170] scsi host0: ahci
[    3.357250] scsi host1: ahci
[    3.358101] scsi host2: ahci
[    3.358946] scsi host3: ahci
[    3.360114] ata1: SATA max UDMA/133 abar m1024@0xf7cf7800 port 0xf7cf7900 irq 24
[    3.360120] ata2: DUMMY
[    3.360124] ata3: DUMMY
[    3.360127] ata4: DUMMY
[    3.361793] atl1c 0000:01:00.0: version 1.0.1.1-NAPI
[    3.364469] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    3.364838] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    3.364845] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.364851] usb usb2: Product: EHCI Host Controller
[    3.364856] usb usb2: Manufacturer: Linux 4.19.0-1-amd64 ehci_hcd
[    3.364861] usb usb2: SerialNumber: 0000:00:1d.7
[    3.365582] hub 2-0:1.0: USB hub found
[    3.365647] hub 2-0:1.0: 8 ports detected
[    3.396411] hub 1-0:1.0: USB hub found
[    3.396472] hub 1-0:1.0: 2 ports detected
[    3.397398] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.397454] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    3.397478] uhci_hcd 0000:00:1d.1: detected 2 ports
[    3.397592] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[    3.397940] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    3.397947] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.397953] usb usb3: Product: UHCI Host Controller
[    3.397958] usb usb3: Manufacturer: Linux 4.19.0-1-amd64 uhci_hcd
[    3.397963] usb usb3: SerialNumber: 0000:00:1d.1
[    3.399343] hub 3-0:1.0: USB hub found
[    3.399408] hub 3-0:1.0: 2 ports detected
[    3.400668] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.400696] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    3.400718] uhci_hcd 0000:00:1d.2: detected 2 ports
[    3.400827] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000d800
[    3.401195] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    3.401202] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.401207] usb usb4: Product: UHCI Host Controller
[    3.401213] usb usb4: Manufacturer: Linux 4.19.0-1-amd64 uhci_hcd
[    3.401217] usb usb4: SerialNumber: 0000:00:1d.2
[    3.401920] hub 4-0:1.0: USB hub found
[    3.401967] hub 4-0:1.0: 2 ports detected
[    3.403046] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.403078] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    3.403117] uhci_hcd 0000:00:1d.3: detected 2 ports
[    3.403251] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[    3.403905] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    3.403913] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.403918] usb usb5: Product: UHCI Host Controller
[    3.403923] usb usb5: Manufacturer: Linux 4.19.0-1-amd64 uhci_hcd
[    3.403927] usb usb5: SerialNumber: 0000:00:1d.3
[    3.404947] hub 5-0:1.0: USB hub found
[    3.404991] hub 5-0:1.0: 2 ports detected
[    3.582502] random: fast init done
[    3.680326] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.682402] ata1.00: unexpected _GTF length (8)
[    3.682485] ata1.00: supports DRM functions and may not be fully accessible
[    3.683288] ata1.00: disabling queued TRIM support
[    3.683292] ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT03B6Q, max UDMA/133
[    3.683296] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    3.685680] ata1.00: unexpected _GTF length (8)
[    3.685756] ata1.00: supports DRM functions and may not be fully accessible
[    3.686493] ata1.00: disabling queued TRIM support
[    3.688284] ata1.00: configured for UDMA/133
[    3.688722] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 850  3B6Q PQ: 0 ANSI: 5
[    3.699315] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    3.699361] sd 0:0:0:0: [sda] Write Protect is off
[    3.699368] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.699431] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.701309]  sda: sda1 sda2 sda3 sda4
[    3.703017] sd 0:0:0:0: [sda] supports TCG Opal
[    3.703023] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.712154] usb 2-5: new high-speed USB device number 2 using ehci-pci
[    3.805324] PM: Image not found (code -22)
[    3.857646] cryptd: max_cpu_qlen set to 1000
[    3.869584] usb 2-5: New USB device found, idVendor=058f, idProduct=6366, bcdDevice= 1.00
[    3.869590] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.869593] usb 2-5: Product: Mass Storage Device
[    3.869597] usb 2-5: Manufacturer: Generic
[    3.869600] usb 2-5: SerialNumber: 058F63666433
[    3.875874] usb-storage 2-5:1.0: USB Mass Storage device detected
[    3.876389] scsi host4: usb-storage 2-5:1.0
[    3.876823] usbcore: registered new interface driver usb-storage
[    3.879060] usbcore: registered new interface driver uas
[    3.996387] usb 2-6: new high-speed USB device number 3 using ehci-pci
[    4.069861] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    4.331455] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[    4.354671] systemd[1]: Inserted module 'autofs4'
[    4.370655] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4728]
[    4.393741] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    4.412295] systemd[1]: Detected architecture x86-64.
[    4.421786] systemd[1]: Set hostname to <clarisse>.
[    4.492789] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0400/0x0, board id: 0, fw id: 650187
[    4.565721] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    4.850614] random: systemd: uninitialized urandom read (16 bytes read)
[    4.858908] random: systemd: uninitialized urandom read (16 bytes read)
[    4.859273] systemd[1]: Listening on udev Kernel Socket.
[    4.859920] random: systemd: uninitialized urandom read (16 bytes read)
[    4.860301] systemd[1]: Listening on Journal Audit Socket.
[    4.860604] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    4.860704] systemd[1]: Reached target User and Group Name Lookups.
[    4.865615] systemd[1]: Created slice system-getty.slice.
[    4.866626] systemd[1]: Created slice User and Session Slice.
[    4.866731] systemd[1]: Reached target Slices.
[    4.931419] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[    4.981419] RPC: Registered named UNIX socket transport module.
[    4.981424] RPC: Registered udp transport module.
[    4.981427] RPC: Registered tcp transport module.
[    4.981430] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    5.025184] scsi 4:0:0:0: Direct-Access     Multiple Card  Reader     1.00 PQ: 0 ANSI: 0
[    5.071707] usb 2-6: New USB device found, idVendor=13d3, idProduct=5702, bcdDevice= 3.22
[    5.071717] usb 2-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    5.071723] usb 2-6: Product: USB2.0 UVC VGA WebCam
[    5.071728] usb 2-6: Manufacturer: Azurewave
[    5.071733] usb 2-6: SerialNumber: 200901010001
[    5.407624] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    5.598365] ACPI: AC Adapter [AC0] (on-line)
[    5.602068] battery: ACPI: Battery Slot [BAT0] (battery present)
[    5.602369] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.602662] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    5.613629] ACPI: button: Notify initial lid state as open
[    5.614172] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[    5.614218] ACPI: Lid Switch [LID]
[    5.623919] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[    5.623968] ACPI: Sleep Button [SLPB]
[    5.624313] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[    5.624376] ACPI: Power Button [PWRB]
[    5.624672] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    5.624737] ACPI: Power Button [PWRF]
[    5.721271] media: Linux media interface: v0.10
[    5.737698] systemd-journald[208]: Received request to flush runtime journal from PID 1
[    5.741143] videodev: Linux video capture interface: v2.00
[    5.763963] uvcvideo: Found UVC 1.00 device USB2.0 UVC VGA WebCam (13d3:5702)
[    5.807321] uvcvideo 2-6:1.0: Entity type for entity Processing 2 was not initialized!
[    5.807333] uvcvideo 2-6:1.0: Entity type for entity Camera 1 was not initialized!
[    5.807340] uvcvideo 2-6:1.0: Entity type for entity Extension 4 was not initialized!
[    5.807690] input: USB2.0 UVC VGA WebCam: USB2.0 U as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input7
[    5.807826] usbcore: registered new interface driver uvcvideo
[    5.807829] USB Video Class driver (1.1.1)
[    5.897129] iTCO_vendor_support: vendor-support=0
[    5.902647] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    5.902783] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0860)
[    5.912907] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.996642] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    6.180570] audit: type=1400 audit(1548001042.710:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=273 comm="apparmor_parser"
[    6.203927] audit: type=1400 audit(1548001042.730:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=275 comm="apparmor_parser"
[    6.240842] audit: type=1400 audit(1548001042.770:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi" pid=279 comm="apparmor_parser"
[    6.240865] audit: type=1400 audit(1548001042.770:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=279 comm="apparmor_parser"
[    6.281508] audit: type=1400 audit(1548001042.810:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=274 comm="apparmor_parser"
[    6.281526] audit: type=1400 audit(1548001042.810:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=274 comm="apparmor_parser"
[    6.287337] audit: type=1400 audit(1548001042.810:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=281 comm="apparmor_parser"
[    6.287355] audit: type=1400 audit(1548001042.810:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=281 comm="apparmor_parser"
[    6.287370] audit: type=1400 audit(1548001042.810:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=281 comm="apparmor_parser"
[    6.287384] audit: type=1400 audit(1548001042.814:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=285 comm="apparmor_parser"
[    6.335880] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    6.335890] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.335897] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    6.335902] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    6.335907] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    6.335914] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    6.335920] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    6.376612] intel_powerclamp: No package C-state available
[    6.379167] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    6.379570] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    6.379605] pci 0000:00:00.0: Intel GMA3150 Chipset
[    6.379663] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    6.379796] pci 0000:00:00.0: detected 8192K stolen memory
[    6.379881] [drm] Replacing VGA console driver
[    6.381561] Console: switching to colour dummy device 80x25
[    6.383449] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.383454] [drm] Driver supports precise vblank timestamp query.
[    6.385532] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    6.433294] [drm] RC6 disabled, disabling runtime PM support
[    6.433461] [drm] Initialized overlay support.
[    6.435125] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[    6.435990] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    6.487214] acpi device:2b: registered as cooling_device4
[    6.487546] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[    6.514871] fbcon: inteldrmfb (fb0) is primary device
[    6.548344] ath: phy0: ASPM enabled: 0x42
[    6.548352] ath: EEPROM regdomain: 0x60
[    6.548354] ath: EEPROM indicates we should expect a direct regpair map
[    6.548360] ath: Country alpha2 being used: 00
[    6.548361] ath: Regpair used: 0x60
[    6.634865] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    6.636202] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffb74380750000, irq=17
[    6.642554] asus_wmi: ASUS WMI generic driver loaded
[    6.645279] eeepc_wmi: Found legacy ATKD device (ASUS010)
[    6.645284] eeepc_wmi: WMI device present, but legacy ATKD device is also present and enabled
[    6.645285] eeepc_wmi: You probably booted with acpi_osi="Linux" or acpi_osi="!Windows 2009"
[    6.645287] eeepc_wmi: Can't load eeepc-wmi, use default acpi_osi (preferred) or eeepc-laptop
[    6.645305] eeepc-wmi: probe of eeepc-wmi failed with error -16
[    6.699887] ------------[ cut here ]------------
[    6.699893] ACPI: LID: reporting state open
[    6.699995] WARNING: CPU: 1 PID: 236 at drivers/acpi/button.c:167 acpi_lid_notify_state+0x38/0x1c0 [button]
[    6.699998] Modules linked in: asus_wmi(E) wmi_bmof(E) sparse_keymap(E) arc4(E) ath9k(E) ath9k_common(E) ath9k_hw(E) ath(E) coretemp(E) snd_hda_codec_realtek(E) kvm_intel(E) snd_hda_codec_generic(E) joydev(E) evdev(E) snd_hda_intel(E) mac80211(E) kvm(E) i915(E) irqbypass(E) snd_hda_codec(E) serio_raw(E) drm_kms_helper(E) snd_hda_core(E) cfg80211(E) pcspkr(E) snd_hwdep(E) rfkill(E) snd_pcm(E) drm(E) snd_timer(E) iTCO_wdt(E) iTCO_vendor_support(E) snd(E) i2c_algo_bit(E) soundcore(E) wmi(E) uvcvideo(E) videobuf2_vmalloc(E) videobuf2_memops(E) videobuf2_v4l2(E) videobuf2_common(E) videodev(E) media(E) pcc_cpufreq(E) button(E) acpi_cpufreq(E) video(E) sg(E) battery(E) ac(E) sunrpc(E) ecryptfs(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc16(E) mbcache(E) jbd2(E) crc32c_generic(E) fscrypto(E) ecb(E)
[    6.700131]  uas(E) usb_storage(E) crypto_simd(E) cryptd(E) glue_helper(E) aes_x86_64(E) sd_mod(E) ahci(E) libahci(E) ehci_pci(E) uhci_hcd(E) psmouse(E) libata(E) ehci_hcd(E) atl1c(E) i2c_i801(E) scsi_mod(E) usbcore(E) lpc_ich(E) usb_common(E) thermal(E)
[    6.700184] CPU: 1 PID: 236 Comm: systemd-udevd Tainted: G            E     4.19.0-1-amd64 #1 Debian 4.19.12-1a~test
[    6.700188] Hardware name: ASUSTeK Computer INC. 1215P/1215P, BIOS 0601    04/18/2011
[    6.700200] RIP: 0010:acpi_lid_notify_state+0x38/0x1c0 [button]
[    6.700206] Code: 41 54 49 89 fc 55 53 48 63 de 48 c7 c6 f9 50 5c c0 48 8b af 48 02 00 00 85 db 48 c7 c7 00 52 5c c0 48 0f 44 f0 e8 12 7e 2b e5 <0f> 0b 80 3d ff 1e 00 00 00 4c 8b 6d 40 48 8b 05 f4 20 00 00 75 72
[    6.700209] RSP: 0018:ffffb743805f3bc8 EFLAGS: 00010282
[    6.700214] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000006
[    6.700217] RDX: 0000000000000007 RSI: 0000000000000002 RDI: ffff95637d2966a0
[    6.700220] RBP: ffff95637c67d360 R08: fffffffffff4f773 R09: 00000000000214c0
[    6.700223] R10: 0000000939364542 R11: 00000000000116e4 R12: ffff95637c000000
[    6.700226] R13: ffff95637b4f59f8 R14: ffff95637b4f3800 R15: 0000000000000000
[    6.700231] FS:  00007fedb7b0d8c0(0000) GS:ffff95637d280000(0000) knlGS:0000000000000000
[    6.700234] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    6.700237] CR2: 00007fedb7b05e3f CR3: 00000000364d0000 CR4: 00000000000006e0
[    6.700240] Call Trace:
[    6.700260]  acpi_lid_input_open+0x60/0x90 [button]
[    6.700274]  input_open_device+0x5d/0xa0
[    6.700287]  evdev_open+0x1b5/0x1e0 [evdev]
[    6.700298]  chrdev_open+0xc4/0x1d0
[    6.700308]  ? __register_chrdev+0xd0/0xd0
[    6.700315]  do_dentry_open+0x132/0x330
[    6.700323]  path_openat+0x32f/0x16e0
[    6.700335]  ? seccomp_run_filters+0x58/0xb0
[    6.700342]  ? snprintf+0x49/0x60
[    6.700349]  do_filp_open+0x93/0x100
[    6.700360]  ? _cond_resched+0x15/0x30
[    6.700366]  ? __check_object_size+0xa3/0x181
[    6.700375]  do_sys_open+0x186/0x210
[    6.700385]  do_syscall_64+0x53/0x100
[    6.700394]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[    6.700401] RIP: 0033:0x7fedb856c47e
[    6.700407] Code: 25 00 00 41 00 3d 00 00 41 00 74 48 48 8d 05 89 62 0d 00 8b 00 85 c0 75 69 89 f2 b8 01 01 00 00 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 0f 87 a6 00 00 00 48 8b 4c 24 28 64 48 33 0c 25
[    6.700410] RSP: 002b:00007ffe1bda2740 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
[    6.700416] RAX: ffffffffffffffda RBX: 00005617028ff110 RCX: 00007fedb856c47e
[    6.700420] RDX: 0000000000080000 RSI: 00005617028ef400 RDI: 00000000ffffff9c
[    6.700423] RBP: 0000000000000000 R08: 0000561700f1b0de R09: 00007fedb85bd7d0
[    6.700426] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[    6.700429] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffe1bda2830
[    6.700437] ---[ end trace c09ad4aac8b582c4 ]---
[    7.317347] Adding 4194236k swap on /dev/sda3.  Priority:-2 extents:1 across:4194236k SSFS
[    7.776446] ------------[ cut here ]------------
[    7.776452] ACPI: LID: reporting state open
[    7.776573] WARNING: CPU: 0 PID: 393 at drivers/acpi/button.c:167 acpi_lid_notify_state+0x38/0x1c0 [button]
[    7.776576] Modules linked in: asus_wmi(E) wmi_bmof(E) sparse_keymap(E) arc4(E) ath9k(E) ath9k_common(E) ath9k_hw(E) ath(E) coretemp(E) snd_hda_codec_realtek(E) kvm_intel(E) snd_hda_codec_generic(E) joydev(E) evdev(E) snd_hda_intel(E) mac80211(E) kvm(E) i915(E) irqbypass(E) snd_hda_codec(E) serio_raw(E) drm_kms_helper(E) snd_hda_core(E) cfg80211(E) pcspkr(E) snd_hwdep(E) rfkill(E) snd_pcm(E) drm(E) snd_timer(E) iTCO_wdt(E) iTCO_vendor_support(E) snd(E) i2c_algo_bit(E) soundcore(E) wmi(E) uvcvideo(E) videobuf2_vmalloc(E) videobuf2_memops(E) videobuf2_v4l2(E) videobuf2_common(E) videodev(E) media(E) pcc_cpufreq(E) button(E) acpi_cpufreq(E) video(E) sg(E) battery(E) ac(E) sunrpc(E) ecryptfs(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc16(E) mbcache(E) jbd2(E) crc32c_generic(E) fscrypto(E) ecb(E)
[    7.776697]  uas(E) usb_storage(E) crypto_simd(E) cryptd(E) glue_helper(E) aes_x86_64(E) sd_mod(E) ahci(E) libahci(E) ehci_pci(E) uhci_hcd(E) psmouse(E) libata(E) ehci_hcd(E) atl1c(E) i2c_i801(E) scsi_mod(E) usbcore(E) lpc_ich(E) usb_common(E) thermal(E)
[    7.776747] CPU: 0 PID: 393 Comm: acpid Tainted: G        W   E     4.19.0-1-amd64 #1 Debian 4.19.12-1a~test
[    7.776751] Hardware name: ASUSTeK Computer INC. 1215P/1215P, BIOS 0601    04/18/2011
[    7.776763] RIP: 0010:acpi_lid_notify_state+0x38/0x1c0 [button]
[    7.776770] Code: 41 54 49 89 fc 55 53 48 63 de 48 c7 c6 f9 50 5c c0 48 8b af 48 02 00 00 85 db 48 c7 c7 00 52 5c c0 48 0f 44 f0 e8 12 7e 2b e5 <0f> 0b 80 3d ff 1e 00 00 00 4c 8b 6d 40 48 8b 05 f4 20 00 00 75 72
[    7.776774] RSP: 0018:ffffb74380797bc8 EFLAGS: 00010282
[    7.776779] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000006
[    7.776783] RDX: 0000000000000007 RSI: 0000000000000002 RDI: ffff95637d2166a0
[    7.776787] RBP: ffff95637c67d360 R08: ffffffffffc91e94 R09: 00000000000214c0
[    7.776790] R10: 00000009a40a170e R11: 00000000000106bc R12: ffff95637c000000
[    7.776794] R13: ffff95637b4f59f8 R14: ffff956376d69800 R15: 0000000000000000
[    7.776799] FS:  00007f50abd56600(0000) GS:ffff95637d200000(0000) knlGS:0000000000000000
[    7.776803] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    7.776807] CR2: 00007fc4b92168a4 CR3: 0000000076ca4000 CR4: 00000000000006f0
[    7.776810] Call Trace:
[    7.776832]  acpi_lid_input_open+0x60/0x90 [button]
[    7.776846]  input_open_device+0x5d/0xa0
[    7.776859]  evdev_open+0x1b5/0x1e0 [evdev]
[    7.776873]  chrdev_open+0xc4/0x1d0
[    7.776881]  ? __register_chrdev+0xd0/0xd0
[    7.776888]  do_dentry_open+0x132/0x330
[    7.776897]  path_openat+0x32f/0x16e0
[    7.776910]  ? wake_up_q+0x70/0x70
[    7.776914]  ? __check_object_size+0xa3/0x181
[    7.776921]  do_filp_open+0x93/0x100
[    7.776930]  ? __check_object_size+0xa3/0x181
[    7.776939]  do_sys_open+0x186/0x210
[    7.776949]  do_syscall_64+0x53/0x100
[    7.776961]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[    7.776969] RIP: 0033:0x7f50abc7e47e
[    7.776975] Code: 25 00 00 41 00 3d 00 00 41 00 74 48 48 8d 05 89 62 0d 00 8b 00 85 c0 75 69 89 f2 b8 01 01 00 00 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 0f 87 a6 00 00 00 48 8b 4c 24 28 64 48 33 0c 25
[    7.776978] RSP: 002b:00007ffeb99b7270 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
[    7.776984] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f50abc7e47e
[    7.776987] RDX: 0000000000080800 RSI: 000055cd7ec0b380 RDI: 00000000ffffff9c
[    7.776989] RBP: 000055cd7ec0b380 R08: 0000000000000000 R09: 00007f50abccfd70
[    7.776992] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
[    7.776995] R13: 00007ffeb99b7440 R14: 00007ffeb99b74c8 R15: 0000000000000000
[    7.777002] ---[ end trace c09ad4aac8b582c5 ]---
[    8.070716] Console: switching to colour frame buffer device 170x48
[    8.102712] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    9.214764] random: crng init done
[    9.214773] random: 7 urandom warning(s) missed due to ratelimiting
[    9.453555] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.473772] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.500182] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    9.516631] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    9.541945] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    9.805549] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   10.969781] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   11.426626] fuse init (API version 7.27)
[   12.122182] wlan0: authenticate with e4:95:6e:40:5e:e2
[   12.137167] wlan0: send auth to e4:95:6e:40:5e:e2 (try 1/3)
[   12.139166] wlan0: authenticated
[   12.144195] wlan0: associate with e4:95:6e:40:5e:e2 (try 1/3)
[   12.147646] wlan0: RX AssocResp from e4:95:6e:40:5e:e2 (capab=0x431 status=0 aid=2)
[   12.147858] wlan0: associated
[   12.230750] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   12.234878] ath: EEPROM regdomain: 0x817c
[   12.234885] ath: EEPROM indicates we should expect a country code
[   12.234888] ath: doing EEPROM country->regdmn map search
[   12.234891] ath: country maps to regdmn code: 0x37
[   12.234895] ath: Country alpha2 being used: IT
[   12.234897] ath: Regpair used: 0x37
[   12.234902] ath: regdomain 0x817c dynamically updated by country element
[   27.284594] Could not find key with description: [06f2d6e2ed76a2b6]
[   27.284769] process_request_key_err: No key
[   27.284772] Could not find valid key in user session keyring for sig specified in mount option: [06f2d6e2ed76a2b6]
[   27.285000] One or more global auth toks could not properly register; rc = [-2]
[   27.285024] Error parsing options; rc = [-2]
[   69.628509] ------------[ cut here ]------------
[   69.628516] ACPI: LID: reporting state open
[   69.628640] WARNING: CPU: 0 PID: 68 at drivers/acpi/button.c:167 acpi_lid_notify_state+0x38/0x1c0 [button]
[   69.628643] Modules linked in: cbc(E) ctr(E) ccm(E) fuse(E) asus_wmi(E) wmi_bmof(E) sparse_keymap(E) arc4(E) ath9k(E) ath9k_common(E) ath9k_hw(E) ath(E) coretemp(E) snd_hda_codec_realtek(E) kvm_intel(E) snd_hda_codec_generic(E) joydev(E) evdev(E) snd_hda_intel(E) mac80211(E) kvm(E) i915(E) irqbypass(E) snd_hda_codec(E) serio_raw(E) drm_kms_helper(E) snd_hda_core(E) cfg80211(E) pcspkr(E) snd_hwdep(E) rfkill(E) snd_pcm(E) drm(E) snd_timer(E) iTCO_wdt(E) iTCO_vendor_support(E) snd(E) i2c_algo_bit(E) soundcore(E) wmi(E) uvcvideo(E) videobuf2_vmalloc(E) videobuf2_memops(E) videobuf2_v4l2(E) videobuf2_common(E) videodev(E) media(E) pcc_cpufreq(E) button(E) acpi_cpufreq(E) video(E) sg(E) battery(E) ac(E) sunrpc(E) ecryptfs(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc16(E) mbcache(E) jbd2(E) crc32c_generic(E)
[   69.628810]  fscrypto(E) ecb(E) uas(E) usb_storage(E) crypto_simd(E) cryptd(E) glue_helper(E) aes_x86_64(E) sd_mod(E) ahci(E) libahci(E) ehci_pci(E) uhci_hcd(E) psmouse(E) libata(E) ehci_hcd(E) atl1c(E) i2c_i801(E) scsi_mod(E) usbcore(E) lpc_ich(E) usb_common(E) thermal(E)
[   69.628880] CPU: 0 PID: 68 Comm: kworker/0:2 Tainted: G        W   E     4.19.0-1-amd64 #1 Debian 4.19.12-1a~test
[   69.628883] Hardware name: ASUSTeK Computer INC. 1215P/1215P, BIOS 0601    04/18/2011
[   69.628896] Workqueue: kacpi_notify acpi_os_execute_deferred
[   69.628910] RIP: 0010:acpi_lid_notify_state+0x38/0x1c0 [button]
[   69.628917] Code: 41 54 49 89 fc 55 53 48 63 de 48 c7 c6 f9 50 5c c0 48 8b af 48 02 00 00 85 db 48 c7 c7 00 52 5c c0 48 0f 44 f0 e8 12 7e 2b e5 <0f> 0b 80 3d ff 1e 00 00 00 4c 8b 6d 40 48 8b 05 f4 20 00 00 75 72
[   69.628922] RSP: 0018:ffffb74380b6fe20 EFLAGS: 00010282
[   69.628929] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000006
[   69.628933] RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff95637d2166a0
[   69.628937] RBP: ffff95637c67d360 R08: 000000000000032f R09: 0000000000000004
[   69.628941] R10: 0000000000000000 R11: 0000000000000001 R12: ffff95637c000000
[   69.628946] R13: 0000000000000000 R14: ffff95633645e540 R15: ffff95636bdcd558
[   69.628952] FS:  0000000000000000(0000) GS:ffff95637d200000(0000) knlGS:0000000000000000
[   69.628957] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   69.628961] CR2: 000055a7eab1b520 CR3: 0000000054a0a000 CR4: 00000000000006f0
[   69.628965] Call Trace:
[   69.628987]  acpi_lid_update_state+0x5b/0x90 [button]
[   69.628999]  acpi_ev_notify_dispatch+0x45/0x5a
[   69.629009]  acpi_os_execute_deferred+0x16/0x20
[   69.629018]  process_one_work+0x1a7/0x3a0
[   69.629029]  worker_thread+0x30/0x390
[   69.629038]  ? pwq_unbound_release_workfn+0xd0/0xd0
[   69.629044]  kthread+0x112/0x130
[   69.629051]  ? kthread_bind+0x30/0x30
[   69.629061]  ret_from_fork+0x1f/0x40
[   69.629071] ---[ end trace c09ad4aac8b582c6 ]---
[   69.629077] ACPI: button: The lid device is not compliant to SW_LID.
[   74.192820] ------------[ cut here ]------------
[   74.192826] ACPI: LID: reporting state open
[   74.192950] WARNING: CPU: 0 PID: 68 at drivers/acpi/button.c:167 acpi_lid_notify_state+0x38/0x1c0 [button]
[   74.192953] Modules linked in: cbc(E) ctr(E) ccm(E) fuse(E) asus_wmi(E) wmi_bmof(E) sparse_keymap(E) arc4(E) ath9k(E) ath9k_common(E) ath9k_hw(E) ath(E) coretemp(E) snd_hda_codec_realtek(E) kvm_intel(E) snd_hda_codec_generic(E) joydev(E) evdev(E) snd_hda_intel(E) mac80211(E) kvm(E) i915(E) irqbypass(E) snd_hda_codec(E) serio_raw(E) drm_kms_helper(E) snd_hda_core(E) cfg80211(E) pcspkr(E) snd_hwdep(E) rfkill(E) snd_pcm(E) drm(E) snd_timer(E) iTCO_wdt(E) iTCO_vendor_support(E) snd(E) i2c_algo_bit(E) soundcore(E) wmi(E) uvcvideo(E) videobuf2_vmalloc(E) videobuf2_memops(E) videobuf2_v4l2(E) videobuf2_common(E) videodev(E) media(E) pcc_cpufreq(E) button(E) acpi_cpufreq(E) video(E) sg(E) battery(E) ac(E) sunrpc(E) ecryptfs(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc16(E) mbcache(E) jbd2(E) crc32c_generic(E)
[   74.193120]  fscrypto(E) ecb(E) uas(E) usb_storage(E) crypto_simd(E) cryptd(E) glue_helper(E) aes_x86_64(E) sd_mod(E) ahci(E) libahci(E) ehci_pci(E) uhci_hcd(E) psmouse(E) libata(E) ehci_hcd(E) atl1c(E) i2c_i801(E) scsi_mod(E) usbcore(E) lpc_ich(E) usb_common(E) thermal(E)
[   74.193190] CPU: 0 PID: 68 Comm: kworker/0:2 Tainted: G        W   E     4.19.0-1-amd64 #1 Debian 4.19.12-1a~test
[   74.193194] Hardware name: ASUSTeK Computer INC. 1215P/1215P, BIOS 0601    04/18/2011
[   74.193207] Workqueue: kacpi_notify acpi_os_execute_deferred
[   74.193220] RIP: 0010:acpi_lid_notify_state+0x38/0x1c0 [button]
[   74.193227] Code: 41 54 49 89 fc 55 53 48 63 de 48 c7 c6 f9 50 5c c0 48 8b af 48 02 00 00 85 db 48 c7 c7 00 52 5c c0 48 0f 44 f0 e8 12 7e 2b e5 <0f> 0b 80 3d ff 1e 00 00 00 4c 8b 6d 40 48 8b 05 f4 20 00 00 75 72
[   74.193232] RSP: 0018:ffffb74380b6fe20 EFLAGS: 00010282
[   74.193239] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000006
[   74.193243] RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff95637d2166a0
[   74.193247] RBP: ffff95637c67d360 R08: 000000000000034e R09: 0000000000000004
[   74.193251] R10: 0000000000000000 R11: 0000000000000001 R12: ffff95637c000000
[   74.193256] R13: 0000000000000000 R14: ffff95633645e540 R15: ffff95636bdcd5d8
[   74.193262] FS:  0000000000000000(0000) GS:ffff95637d200000(0000) knlGS:0000000000000000
[   74.193267] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   74.193271] CR2: 000055a7eab1b520 CR3: 0000000054a0a000 CR4: 00000000000006f0
[   74.193275] Call Trace:
[   74.193296]  acpi_lid_update_state+0x5b/0x90 [button]
[   74.193308]  acpi_ev_notify_dispatch+0x45/0x5a
[   74.193318]  acpi_os_execute_deferred+0x16/0x20
[   74.193327]  process_one_work+0x1a7/0x3a0
[   74.193336]  worker_thread+0x30/0x390
[   74.193346]  ? pwq_unbound_release_workfn+0xd0/0xd0
[   74.193351]  kthread+0x112/0x130
[   74.193360]  ? kthread_bind+0x30/0x30
[   74.193370]  ret_from_fork+0x1f/0x40
[   74.193380] ---[ end trace c09ad4aac8b582c7 ]---

Reply to: