Bug#919227: linux-image-4.19.0-1-amd64: acpi lid regression from stable to testing
Package: src:linux
Version: 4.19.13-1
Severity: normal
Dear Maintainer,
after the upgrade to Testing, the system is no longer able to detect a closed lid to initiate suspend-to-ram; reinstalling the kernel from Stable (4.9.0-7), while keeping the rest of the
system as is, brings the functionality back.
Using the archived images on snapshot.debian.org:
4.9.0-7: OK
4.10.0-trunk: fails
4.11.0-2: fails
4.14.0-1: fails
4.19.0-1: fails (first failure detected on this version)
(those versions which are failing all have the "SW_LID" warning in dmesg, see below)
Other observations:
* the sleep keycombo Fn+F1 works
* pm-suspend works
* pm-hibernate works
If I watch the state of /proc/acpi/button/lid/LID/state from a remote shell and close the lid, it shows "open".
/etc/default/acpi-support is fine: LID_SLEEP=true is active, both acpid and the system itself were restarted multiple times.
I have tried the button.lid_init_state option (see Documentation/acpi/acpi-lid.txt) but none of the values
work (method / open / ignore).
This upstream report looks relevant: https://bugzilla.kernel.org/show_bug.cgi?id=192231
I'm in the process of rebuilding the kernel with the suggested debug patch
and I'll follow up with the results.
-- Package-specific info:
** Version:
Linux version 4.19.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 8.2.0 (Debian 8.2.0-13)) #1 SMP Debian 4.19.13-1 (2018-12-30)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.19.0-1-amd64 root=UUID=e19e81ac-9618-4735-8a7c-bff7f48b50cb ro resume=UUID=3464e393-b3d3-49c3-a1e0-858d6123f7c3 button.lid_init_state=open quiet
** Not tainted
** Kernel log:
[ 5.990210] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[ 5.990261] ACPI: Lid Switch [LID]
[ 5.993277] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 5.993798] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[ 5.993850] ACPI: Sleep Button [SLPB]
[ 5.994349] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 5.994410] ACPI: Power Button [PWRB]
[ 5.994914] ACPI: AC Adapter [AC0] (on-line)
[ 5.999389] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 5.999903] ACPI: Power Button [PWRF]
[ 6.092418] systemd-journald[201]: Received request to flush runtime journal from PID 1
[ 6.144603] audit: type=1400 audit(1547392874.667:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=265 comm="apparmor_parser"
[ 6.149025] audit: type=1400 audit(1547392874.671:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=267 comm="apparmor_parser"
[ 6.181730] audit: type=1400 audit(1547392874.703:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=266 comm="apparmor_parser"
[ 6.181752] audit: type=1400 audit(1547392874.703:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=266 comm="apparmor_parser"
[ 6.184900] audit: type=1400 audit(1547392874.707:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=269 comm="apparmor_parser"
[ 6.184916] audit: type=1400 audit(1547392874.707:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=269 comm="apparmor_parser"
[ 6.184929] audit: type=1400 audit(1547392874.707:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=269 comm="apparmor_parser"
[ 6.192163] audit: type=1400 audit(1547392874.711:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi" pid=268 comm="apparmor_parser"
[ 6.192187] audit: type=1400 audit(1547392874.711:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=268 comm="apparmor_parser"
[ 6.235938] audit: type=1400 audit(1547392874.755:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=270 comm="apparmor_parser"
[ 6.307677] iTCO_vendor_support: vendor-support=0
[ 6.346358] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.346500] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0860)
[ 6.348785] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.446257] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 6.497967] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.498169] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 6.731722] pci 0000:00:00.0: Intel GMA3150 Chipset
[ 6.731775] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 6.731884] pci 0000:00:00.0: detected 8192K stolen memory
[ 6.731952] [drm] Replacing VGA console driver
[ 6.732877] Console: switching to colour dummy device 80x25
[ 6.745105] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.745111] [drm] Driver supports precise vblank timestamp query.
[ 6.748822] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.773444] [drm] RC6 disabled, disabling runtime PM support
[ 6.773580] [drm] Initialized overlay support.
[ 6.804326] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[ 6.805154] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 6.846852] acpi device:2b: registered as cooling_device4
[ 6.847228] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 6.879047] fbcon: inteldrmfb (fb0) is primary device
[ 6.991213] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 6.991221] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.991227] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 6.991232] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 6.991236] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 6.991244] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 6.991250] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 7.056129] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.056516] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 7.081873] ath: phy0: ASPM enabled: 0x42
[ 7.081881] ath: EEPROM regdomain: 0x60
[ 7.081883] ath: EEPROM indicates we should expect a direct regpair map
[ 7.081890] ath: Country alpha2 being used: 00
[ 7.081892] ath: Regpair used: 0x60
[ 7.106575] intel_powerclamp: No package C-state available
[ 7.153398] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 7.154620] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffa07ec0740000, irq=17
[ 7.237957] asus_wmi: ASUS WMI generic driver loaded
[ 7.246401] eeepc_wmi: Found legacy ATKD device (ASUS010)
[ 7.246405] eeepc_wmi: WMI device present, but legacy ATKD device is also present and enabled
[ 7.246409] eeepc_wmi: You probably booted with acpi_osi="Linux" or acpi_osi="!Windows 2009"
[ 7.246411] eeepc_wmi: Can't load eeepc-wmi, use default acpi_osi (preferred) or eeepc-laptop
[ 7.246429] eeepc-wmi: probe of eeepc-wmi failed with error -16
[ 7.801082] Adding 4194236k swap on /dev/sda3. Priority:-2 extents:1 across:4194236k SSFS
[ 8.424639] Console: switching to colour frame buffer device 170x48
[ 8.457323] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 9.552172] random: crng init done
[ 9.552181] random: 7 urandom warning(s) missed due to ratelimiting
[ 9.829892] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.849797] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.879853] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9.897073] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9.923078] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 10.118412] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 11.303617] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 11.932454] fuse init (API version 7.27)
[ 12.479558] wlan0: authenticate with e4:95:6e:40:5e:e2
[ 12.498266] wlan0: send auth to e4:95:6e:40:5e:e2 (try 1/3)
[ 12.501402] wlan0: authenticated
[ 12.508198] wlan0: associate with e4:95:6e:40:5e:e2 (try 1/3)
[ 12.511703] wlan0: RX AssocResp from e4:95:6e:40:5e:e2 (capab=0x431 status=0 aid=2)
[ 12.511941] wlan0: associated
[ 12.574476] ath: EEPROM regdomain: 0x817c
[ 12.574481] ath: EEPROM indicates we should expect a country code
[ 12.574485] ath: doing EEPROM country->regdmn map search
[ 12.574488] ath: country maps to regdmn code: 0x37
[ 12.574492] ath: Country alpha2 being used: IT
[ 12.574495] ath: Regpair used: 0x37
[ 12.574500] ath: regdomain 0x817c dynamically updated by country element
[ 12.574810] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 29.384679] Could not find key with description: [06f2d6e2ed76a2b6]
[ 29.384691] process_request_key_err: No key
[ 29.384694] Could not find valid key in user session keyring for sig specified in mount option: [06f2d6e2ed76a2b6]
[ 29.384700] One or more global auth toks could not properly register; rc = [-2]
[ 29.384705] Error parsing options; rc = [-2]
[ 42.120510] ACPI: button: The lid device is not compliant to SW_LID.
[ 67.648043] perf: interrupt took too long (6089 > 2500), lowering kernel.perf_event_max_sample_rate to 32750
** Model information
sys_vendor: ASUSTeK Computer INC.
product_name: 1215P
product_version: x.x
chassis_vendor: ASUSTeK Computer INC.
chassis_version: x.x
bios_vendor: American Megatrends Inc.
bios_version: 0601
board_vendor: ASUSTeK Computer INC.
board_name: 1215P
board_version: x.xx
** Loaded modules:
cbc
ctr
ccm
fuse
asus_wmi
sparse_keymap
wmi_bmof
arc4
coretemp
ath9k
kvm_intel
snd_hda_codec_realtek
ath9k_common
snd_hda_codec_generic
ath9k_hw
snd_hda_intel
ath
snd_hda_codec
kvm
mac80211
snd_hda_core
i915
irqbypass
joydev
evdev
snd_hwdep
cfg80211
sg
serio_raw
snd_pcm
pcspkr
drm_kms_helper
drm
snd_timer
iTCO_wdt
snd
rfkill
iTCO_vendor_support
wmi
i2c_algo_bit
soundcore
video
ac
battery
button
pcc_cpufreq
acpi_cpufreq
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
videobuf2_common
videodev
media
sunrpc
ecryptfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
crypto_simd
cryptd
glue_helper
aes_x86_64
uas
usb_storage
sd_mod
ahci
libahci
libata
scsi_mod
ehci_pci
uhci_hcd
psmouse
atl1c
ehci_hcd
thermal
usbcore
i2c_i801
lpc_ich
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge [8086:a010] (rev 02)
Subsystem: ASUSTeK Computer Inc. Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge (Eee PC 1015PX) [1043:83ac]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a011] (rev 02) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [1043:8446]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7e00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at dc00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f7d00000 (32-bit, non-prefetchable) [size=1M]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:02.1 Display controller [0380]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a012] (rev 02)
Subsystem: ASUSTeK Computer Inc. Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [1043:8446]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f7e80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: ASUSTeK Computer Inc. NM10/ICH7 Family High Definition Audio Controller [1043:841c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 25
Region 0: Memory at f7cf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 80000000-801fffff
Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f8000000-fbffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7f00000-f7ffffff
Prefetchable memory behind bridge: 0000000080400000-00000000805fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. NM10/ICH7 Family USB UHCI Controller [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. NM10/ICH7 Family USB UHCI Controller [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. NM10/ICH7 Family USB UHCI Controller [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 20
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. NM10/ICH7 Family USB UHCI Controller [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. NM10/ICH7 Family USB2 EHCI Controller (Eee PC 1015PX) [1043:83ad]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7cf7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02)
Subsystem: ASUSTeK Computer Inc. NM10 Family LPC Controller (Eee PC 1015PX) [1043:83ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation NM10/ICH7 Family SATA Controller [AHCI mode] [8086:27c1] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. NM10/ICH7 Family SATA Controller [AHCI mode] (Eee PC 1015PX) [1043:83ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 24
Region 0: I/O ports at d080 [size=8]
Region 1: I/O ports at d000 [size=4]
Region 2: I/O ports at cc00 [size=8]
Region 3: I/O ports at c880 [size=4]
Region 4: I/O ports at c800 [size=32]
Region 5: Memory at f7cf7800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 02)
Subsystem: ASUSTeK Computer Inc. NM10/ICH7 Family SMBus Controller [1043:83ad]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 0400 [size=32]
Kernel modules: i2c_i801
01:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8152 v2.0 Fast Ethernet [1969:2062] (rev c1)
Subsystem: ASUSTeK Computer Inc. AR8152 v2.0 Fast Ethernet (Eee PC 1015PX) [1043:8468]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 26
Region 0: Memory at f7fc0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at ec00 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c
Kernel modules: atl1c
02:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: AzureWave AW-NE785 / AW-NE785H 802.11bgn Wireless Full or Half-size Mini PCIe Card [1a3b:1089]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fbff0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
Kernel modules: ath9k
** USB devices:
Bus 005 Device 003: ID 13d3:5702 IMC Networks UVC VGA Webcam
Bus 005 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: buster/sid
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.19.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8), LANGUAGE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.132
ii kmod 25-2
ii linux-base 4.5
Versions of packages linux-image-4.19.0-1-amd64 recommends:
ii apparmor 2.13.2-3
ii firmware-linux-free 3.4
ii irqbalance 1.5.0-0.1
Versions of packages linux-image-4.19.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02+dfsg1-9
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-1-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: