Bug#919574: linux-image-4.19.0-1-amd64: "kobject_add_internal failed for dvb0.frontend0" after suspend
Package: src:linux
Version: 4.19.12-1
Severity: normal
Dear Maintainer,
after the upgrade from Stretch to Buster this issue started to occur everytime
the pc resumes from suspend leading to these messages in dmesg:
[Do Jan 17 11:54:26 2019] usb 1-3: dvb_usb_v2: found a 'TechnoTrend TVStick
CT2-4400' in warm state
[Do Jan 17 11:54:26 2019] usb 1-3: dvb_usb_v2: will pass the complete MPEG2
transport stream to the software demuxer
[Do Jan 17 11:54:26 2019] dvbdev: DVB: registering new adapter (TechnoTrend
TVStick CT2-4400)
[Do Jan 17 11:54:26 2019] usb 1-3: dvb_usb_v2: MAC address: bc:ea:2b:44:0f:89
[Do Jan 17 11:54:26 2019] i2c i2c-6: Added multiplexed i2c bus 7
[Do Jan 17 11:54:26 2019] si2168 6-0064: Silicon Labs Si2168-B40 successfully
identified
[Do Jan 17 11:54:26 2019] si2168 6-0064: firmware version: B 4.0.2
[Do Jan 17 11:54:26 2019] si2157 7-0060: Silicon Labs Si2147/2148/2157/2158
successfully attached
[Do Jan 17 11:54:26 2019] usb 1-3: DVB: registering adapter 0 frontend 0
(Silicon Labs Si2168)...
[Do Jan 17 11:54:26 2019] sysfs: cannot create duplicate filename
'/devices/pci0000:00/0000:00:14.0/usb1/1-3/dvb/dvb0.frontend0'
[Do Jan 17 11:54:26 2019] CPU: 3 PID: 6558 Comm: modprobe Not tainted
4.20.0-trunk-amd64 #1 Debian 4.20-1~exp1
[Do Jan 17 11:54:26 2019] Hardware name: /NUC5i3RYB, BIOS
RYBDWi35.86A.0371.2018.0709.1155 07/09/2018
[Do Jan 17 11:54:26 2019] Call Trace:
[Do Jan 17 11:54:26 2019] dump_stack+0x5c/0x80
[Do Jan 17 11:54:26 2019] sysfs_warn_dup.cold.4+0x17/0x2a
[Do Jan 17 11:54:26 2019] sysfs_create_dir_ns+0xa7/0xd0
[Do Jan 17 11:54:26 2019] kobject_add_internal+0xbc/0x270
[Do Jan 17 11:54:26 2019] kobject_add+0x7d/0xb0
[Do Jan 17 11:54:26 2019] ? refcount_inc_checked+0x5/0x30
[Do Jan 17 11:54:26 2019] device_add+0x125/0x690
[Do Jan 17 11:54:26 2019] device_create_groups_vargs+0xc1/0xf0
[Do Jan 17 11:54:26 2019] device_create+0x49/0x60
[Do Jan 17 11:54:26 2019] ? _cond_resched+0x15/0x30
[Do Jan 17 11:54:26 2019] ? kmem_cache_alloc_trace+0x155/0x1d0
[Do Jan 17 11:54:26 2019] dvb_register_device+0x230/0x2c0 [dvb_core]
[Do Jan 17 11:54:26 2019] dvb_register_frontend+0x17a/0x210 [dvb_core]
[Do Jan 17 11:54:26 2019] dvb_usbv2_probe+0x648/0x10c0 [dvb_usb_v2]
[Do Jan 17 11:54:26 2019] ? __pm_runtime_set_status+0x247/0x260
[Do Jan 17 11:54:26 2019] usb_probe_interface+0xe4/0x2f0 [usbcore]
[Do Jan 17 11:54:26 2019] really_probe+0xf8/0x3b0
[Do Jan 17 11:54:26 2019] driver_probe_device+0xb3/0xf0
[Do Jan 17 11:54:26 2019] __driver_attach+0xdd/0x110
[Do Jan 17 11:54:26 2019] ? driver_probe_device+0xf0/0xf0
[Do Jan 17 11:54:26 2019] bus_for_each_dev+0x76/0xc0
[Do Jan 17 11:54:26 2019] ? klist_add_tail+0x3b/0x70
[Do Jan 17 11:54:26 2019] bus_add_driver+0x152/0x230
[Do Jan 17 11:54:26 2019] driver_register+0x6b/0xb0
[Do Jan 17 11:54:26 2019] usb_register_driver+0x7a/0x130 [usbcore]
[Do Jan 17 11:54:26 2019] ? 0xffffffffc0687000
[Do Jan 17 11:54:26 2019] do_one_initcall+0x46/0x1c3
[Do Jan 17 11:54:26 2019] ? free_unref_page_commit+0x91/0x100
[Do Jan 17 11:54:26 2019] ? _cond_resched+0x15/0x30
[Do Jan 17 11:54:26 2019] ? kmem_cache_alloc_trace+0x155/0x1d0
[Do Jan 17 11:54:26 2019] do_init_module+0x5a/0x210
[Do Jan 17 11:54:26 2019] load_module+0x215c/0x2390
[Do Jan 17 11:54:26 2019] ? __do_sys_finit_module+0xad/0x110
[Do Jan 17 11:54:26 2019] __do_sys_finit_module+0xad/0x110
[Do Jan 17 11:54:26 2019] do_syscall_64+0x53/0x100
[Do Jan 17 11:54:26 2019] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[Do Jan 17 11:54:26 2019] RIP: 0033:0x7f594966d269
[Do Jan 17 11:54:26 2019] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00
00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05
<48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d f7 6b 0c 00 f7 d8 64 89 01 48
[Do Jan 17 11:54:26 2019] RSP: 002b:00007ffe090df768 EFLAGS: 00000246 ORIG_RAX:
0000000000000139
[Do Jan 17 11:54:26 2019] RAX: ffffffffffffffda RBX: 0000559a8cdd9de0 RCX:
00007f594966d269
[Do Jan 17 11:54:26 2019] RDX: 0000000000000000 RSI: 0000559a8cddcc50 RDI:
0000000000000003
[Do Jan 17 11:54:26 2019] RBP: 0000559a8cddcc50 R08: 0000000000000000 R09:
0000000000000000
[Do Jan 17 11:54:26 2019] R10: 0000000000000003 R11: 0000000000000246 R12:
0000000000000000
[Do Jan 17 11:54:26 2019] R13: 0000559a8cdd9e60 R14: 0000000000040000 R15:
0000559a8cdd9de0
[Do Jan 17 11:54:26 2019] kobject_add_internal failed for dvb0.frontend0 with
-EEXIST, don't try to register things with the same name in the same directory.
[Do Jan 17 11:54:26 2019] dvbdev: dvb_register_device: failed to create device
dvb0.frontend0 (-17)
[Do Jan 17 11:54:26 2019] usb 1-3: dvb_usb_v2: 'TechnoTrend TVStick CT2-4400'
successfully initialized and connected
[Do Jan 17 11:54:26 2019] usbcore: registered new interface driver
dvb_usb_dvbsky
[Do Jan 17 11:54:29 2019] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex,
Flow Control: Rx/Tx
[Do Jan 17 11:54:37 2019] input: Sundtek Remote Control as
/devices/virtual/input/input23
[Do Jan 17 11:54:43 2019] usb 1-4: usbfs: process 6761 (mediasrv) did not claim
interface 2 before use
The result is that the affected DVB stick doesn't work anymore. Only a reboot
"reactivates" the usb device correctly.
I installed and booted linux-image-4.20.0-trunk-amd64 but the issue remains.
Interestringly when running linux-image-4.9.0-8-amd64 the system works fine.
Best regards, Frank
-- Package-specific info:
** Version:
Linux version 4.19.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 8.2.0 (Debian 8.2.0-13)) #1 SMP Debian 4.19.12-1 (2018-12-22)
** Command line:
BOOT_IMAGE=/vmlinuz-4.19.0-1-amd64 root=/dev/mapper/cryptvol-rootfs ro quiet splash kopt=root=/dev/mapper/cryptvol-rootfs
** Not tainted
** Kernel log:
[ 10.742299] systemd-journald[351]: Received request to flush runtime journal from PID 1
[ 10.752365] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 10.752419] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 10.752421] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.752422] usb usb3: Product: EHCI Host Controller
[ 10.752424] usb usb3: Manufacturer: Linux 4.19.0-1-amd64 ehci_hcd
[ 10.752425] usb usb3: SerialNumber: 0000:00:1d.0
[ 10.752559] hub 3-0:1.0: USB hub found
[ 10.752565] hub 3-0:1.0: 2 ports detected
[ 11.014070] nuvoton-cir 00:01: found NCT6776F or compatible: chip id: 0xc3 0x33
[ 11.046616] input: PC Speaker as /devices/platform/pcspkr/input/input13
[ 11.049348] Registered IR keymap rc-rc6-mce
[ 11.088354] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 11.090641] IR RC6 protocol handler initialized
[ 11.094519] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 11.094555] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 11.106928] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 11.116407] rc rc0: Nuvoton w836x7hg Infrared Remote Transceiver as /devices/pnp0/00:01/rc/rc0
[ 11.116479] input: Nuvoton w836x7hg Infrared Remote Transceiver as /devices/pnp0/00:01/rc/rc0/input12
[ 11.117841] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 11.117843] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 11.117845] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 11.117846] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 11.117847] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 11.118943] rc rc0: lirc_dev: driver nuvoton-cir registered at minor = 0, raw IR receiver, no transmitter
[ 11.119426] nuvoton-cir 00:01: driver has been successfully loaded
[ 11.124286] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 11.124287] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 11.124566] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 11.216547] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 11.248746] usb 3-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.03
[ 11.248749] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 11.248979] hub 3-1:1.0: USB hub found
[ 11.249049] hub 3-1:1.0: 8 ports detected
[ 11.267857] iTCO_vendor_support: vendor-support=0
[ 11.272614] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 11.272667] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 11.278698] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.307706] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) b8:ae:ed:72:db:9c
[ 11.307710] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 11.307745] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 11.335746] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 11.462622] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 11.522972] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ 11.524362] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[ 11.525919] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 11.526511] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[ 11.526617] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[ 11.527106] snd_hda_intel 0000:00:03.0: device 8086:2057 is on the power_save blacklist, forcing power_save to 0
[ 11.535994] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC283: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp
[ 11.535998] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.536001] snd_hda_codec_realtek hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.536004] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 11.536006] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 11.536008] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
[ 11.585612] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[ 11.586703] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[ 11.586837] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21
[ 11.586970] snd_hda_intel 0000:00:1b.0: device 8086:2057 is on the power_save blacklist, forcing power_save to 0
[ 11.604375] usb 1-3: dvb_usb_v2: found a 'TechnoTrend TVStick CT2-4400' in warm state
[ 11.604430] usb 1-3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 11.604439] dvbdev: DVB: registering new adapter (TechnoTrend TVStick CT2-4400)
[ 11.605635] usb 1-3: dvb_usb_v2: MAC address: bc:ea:2b:44:0f:89
[ 11.661403] Adding 4194300k swap on /dev/mapper/cryptvol-swap. Priority:-2 extents:1 across:4194300k FS
[ 11.666185] i2c i2c-6: Added multiplexed i2c bus 7
[ 11.666189] si2168 6-0064: Silicon Labs Si2168-B40 successfully identified
[ 11.666191] si2168 6-0064: firmware version: B 4.0.2
[ 11.693925] media: Linux media interface: v0.10
[ 11.700504] si2157 7-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached
[ 11.700527] usb 1-3: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
[ 11.700882] usb 1-3: dvb_usb_v2: 'TechnoTrend TVStick CT2-4400' successfully initialized and connected
[ 11.700926] usbcore: registered new interface driver dvb_usb_dvbsky
[ 11.715564] intel_rapl: Found RAPL domain package
[ 11.715567] intel_rapl: Found RAPL domain core
[ 11.715568] intel_rapl: Found RAPL domain uncore
[ 11.715570] intel_rapl: Found RAPL domain dram
[ 11.906952] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 12.021363] audit: type=1400 audit(1547726647.690:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=551 comm="apparmor_parser"
[ 12.027144] audit: type=1400 audit(1547726647.694:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=552 comm="apparmor_parser"
[ 12.031256] audit: type=1400 audit(1547726647.698:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=548 comm="apparmor_parser"
[ 12.031262] audit: type=1400 audit(1547726647.698:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=548 comm="apparmor_parser"
[ 12.031991] audit: type=1400 audit(1547726647.698:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=553 comm="apparmor_parser"
[ 12.045566] audit: type=1400 audit(1547726647.714:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=549 comm="apparmor_parser"
[ 12.045570] audit: type=1400 audit(1547726647.714:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=549 comm="apparmor_parser"
[ 12.048372] audit: type=1400 audit(1547726647.718:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=550 comm="apparmor_parser"
[ 12.048379] audit: type=1400 audit(1547726647.718:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=550 comm="apparmor_parser"
[ 12.048383] audit: type=1400 audit(1547726647.718:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=550 comm="apparmor_parser"
[ 12.280707] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 14.926496] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 14.926540] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 18.476641] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 18.492507] NFSD: starting 45-second grace period (net f00000a8)
[ 18.793888] input: Sundtek Remote Control as /devices/virtual/input/input22
[ 21.905057] fuse init (API version 7.27)
[ 22.642166] si2168 6-0064: firmware: direct-loading firmware dvb-demod-si2168-b40-01.fw
[ 22.642171] si2168 6-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
[ 23.318322] si2168 6-0064: firmware version: B 4.0.11
[ 23.331114] si2157 7-0060: found a 'Silicon Labs Si2157-A30'
[ 23.357008] si2157 7-0060: firmware version: 3.0.5
[ 84.131487] usb 1-4: usbfs: process 851 (mediasrv) did not claim interface 2 before use
** Model information
sys_vendor:
product_name:
product_version:
chassis_vendor:
chassis_version:
bios_vendor: Intel Corporation
bios_version: RYBDWi35.86A.0371.2018.0709.1155
board_vendor: Intel Corporation
board_name: NUC5i3RYB
board_version: H41000-502
** Loaded modules:
fuse
uinput
binfmt_misc
intel_rapl
x86_pkg_temp_thermal
intel_powerclamp
si2157
coretemp
media
kvm_intel
si2168
snd_hda_codec_realtek
snd_hda_codec_generic
snd_hda_codec_hdmi
kvm
snd_hda_intel
snd_hda_codec
irqbypass
snd_hda_core
dvb_usb_dvbsky
dvb_usb_v2
snd_hwdep
m88ds3103
snd_pcm
crct10dif_pclmul
i2c_mux
crc32_pclmul
dvb_core
snd_timer
snd
iTCO_wdt
ghash_clmulni_intel
iTCO_vendor_support
soundcore
intel_cstate
mei_me
intel_uncore
e1000e
intel_rapl_perf
mei
sg
lpc_ich
i2c_i801
ir_rc6_decoder
pcspkr
rc_rc6_mce
nuvoton_cir
rc_core
acpi_pad
pcc_cpufreq
ehci_pci
ehci_hcd
nfsd
auth_rpcgss
nfs_acl
lockd
grace
sunrpc
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
joydev
dm_crypt
dm_mod
hid_logitech_hidpp
hid_logitech_dj
hid_generic
usbhid
hid
sd_mod
i915
crc32c_intel
i2c_algo_bit
xhci_pci
drm_kms_helper
xhci_hcd
ahci
libahci
drm
aesni_intel
libata
usbcore
aes_x86_64
crypto_simd
usb_common
cryptd
scsi_mod
glue_helper
fan
thermal
evdev
video
button
** Network interface configuration:
source /etc/network/interfaces.d/*
auto lo enp0s25
iface lo inet loopback
allow-hotplug enp0s25
iface enp0s25 inet static
address 192.168.120.100/24
gateway 192.168.120.1
dns-nameservers 192.168.120.1
dns-search fritz.box
ethernet-wol g
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp0s25: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether b8:ae:ed:72:db:9c brd ff:ff:ff:ff:ff:ff
inet 192.168.120.100/24 brd 192.168.120.255 scope global enp0s25
valid_lft forever preferred_lft forever
inet6 fe80::baae:edff:fe72:db9c/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
enp0s25: 1508515 10157 0 1 0 0 0 16 11217422 14043 0 0 0 0 0 0
lo: 9699047 15335 0 0 0 0 0 0 9699047 15335 0 0 0 0 0 0
*** Protocol statistics:
Ip:
Forwarding: 2
10172 total packets received
0 forwarded
0 incoming packets discarded
10172 incoming packets delivered
8023 requests sent out
Icmp:
3 ICMP messages received
0 input ICMP message failed
ICMP input histogram:
destination unreachable: 3
3 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 3
IcmpMsg:
InType3: 3
OutType3: 3
Tcp:
7 active connection openings
4 passive connection openings
2 failed connection attempts
0 connection resets received
4 connections established
25348 segments received
29254 segments sent out
2 segments retransmitted
0 bad segments received
8 resets sent
Udp:
219 packets received
0 packets to unknown port received
0 packet receive errors
82 packets sent
0 receive buffer errors
0 send buffer errors
IgnoredMulti: 12
UdpLite:
TcpExt:
1 TCP sockets finished time wait in fast timer
150 delayed acks sent
1 delayed acks further delayed because of locked socket
Quick ack mode was activated 3 times
16357 packet headers predicted
561 acknowledgments not containing data payload received
11400 predicted acknowledgments
TCPLossProbes: 2
TCPDSACKOldSent: 3
TCPDSACKRecv: 2
3 connections reset due to unexpected data
TCPDSACKIgnoredNoUndo: 2
TCPRcvCoalesce: 136
TCPAutoCorking: 106
TCPOrigDataSent: 23895
TCPHystartTrainDetect: 2
TCPHystartTrainCwnd: 40
TCPDelivered: 23902
IpExt:
InMcastPkts: 36
OutMcastPkts: 25
InBcastPkts: 97
OutBcastPkts: 43
InOctets: 1331835
OutOctets: 10650228
InMcastOctets: 3884
OutMcastOctets: 3057
InBcastOctets: 10142
OutBcastOctets: 5567
InNoECTPkts: 10204
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Broadwell-U Host Bridge -OPI [8086:1604] (rev 09)
Subsystem: Intel Corporation Broadwell-U Host Bridge -OPI [8086:2057]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: bdw_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 5500 [8086:1616] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation HD Graphics 5500 [8086:2057]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at 99000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at a0000000 (64-bit, prefetchable) [size=512M]
Region 4: I/O ports at 3000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:03.0 Audio device [0403]: Intel Corporation Broadwell-U Audio Controller [8086:160c] (rev 09)
Subsystem: Intel Corporation Broadwell-U Audio Controller [8086:2057]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at 9a034000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation Wildcat Point-LP USB xHCI Controller [8086:9cb1] (rev 03) (prog-if 30 [XHCI])
Subsystem: Intel Corporation Wildcat Point-LP USB xHCI Controller [8086:2057]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at 9a020000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller [0780]: Intel Corporation Wildcat Point-LP MEI Controller #1 [8086:9cba] (rev 03)
Subsystem: Intel Corporation Wildcat Point-LP MEI Controller [8086:2057]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at 9a03d000 (64-bit, non-prefetchable) [size=32]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection (3) I218-V [8086:15a3] (rev 03)
Subsystem: Intel Corporation Ethernet Connection (3) I218-V [8086:2057]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at 9a000000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at 9a03b000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 3080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1b.0 Audio device [0403]: Intel Corporation Wildcat Point-LP High Definition Audio Controller [8086:9ca0] (rev 03)
Subsystem: Intel Corporation Wildcat Point-LP High Definition Audio Controller [8086:2057]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 48
Region 0: Memory at 9a030000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1d.0 USB controller [0c03]: Intel Corporation Wildcat Point-LP USB EHCI Controller [8086:9ca6] (rev 03) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Wildcat Point-LP USB EHCI Controller [8086:2057]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at 9a03a000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation Wildcat Point-LP LPC Controller [8086:9cc3] (rev 03)
Subsystem: Intel Corporation Wildcat Point-LP LPC Controller [8086:2057]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] [8086:9c83] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] [8086:2057]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 42
Region 0: I/O ports at 30d0 [size=8]
Region 1: I/O ports at 30c0 [size=4]
Region 2: I/O ports at 30b0 [size=8]
Region 3: I/O ports at 30a0 [size=4]
Region 4: I/O ports at 3060 [size=32]
Region 5: Memory at 9a039000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation Wildcat Point-LP SMBus Controller [8086:9ca2] (rev 03)
Subsystem: Intel Corporation Wildcat Point-LP SMBus Controller [8086:2057]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at 9a038000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 3040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
** USB devices:
Bus 003 Device 002: ID 8087:8001 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 2659:1210 Sundtek MediaTV Pro III (EU)
Bus 001 Device 003: ID 0b48:3014 TechnoTrend AG TT-TVStick CT2-4400
Bus 001 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: buster/sid
APT prefers testing
APT policy: (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.19.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.132
ii kmod 25-2
ii linux-base 4.5
Versions of packages linux-image-4.19.0-1-amd64 recommends:
ii apparmor 2.13.2-3
ii firmware-linux-free 3.4
ii irqbalance 1.5.0-0.1
Versions of packages linux-image-4.19.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02+dfsg1-9
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-1-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: