Your message dated Wed, 17 Apr 2019 21:45:22 +0100 with message-id <728a85b6a9010fcdee2f964055c25ae9df44eaed.camel@decadent.org.uk> and subject line Re: Bug#927277: linux-image-4.19.0-4-amd64: f71882fg hwmon driver conflicts with ACPI has caused the Debian Bug report #927277, regarding linux-image-4.19.0-4-amd64: f71882fg hwmon driver conflicts with ACPI to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 927277: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=927277 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-4.19.0-4-amd64: f71882fg hwmon driver conflicts with ACPI
- From: Adrian Ban <bugs@abtelecom.ro>
- Date: Wed, 17 Apr 2019 12:22:19 +0300
- Message-id: <[🔎] 155549293949.20360.16450545512096643159.reportbug@Buh-R1.abtelecom.ro>
Package: src:linux Version: 4.19.28-2 Severity: normal Hi, When I'm trying to read voltage and fan speed from the MB which has a f81866a chip through ACPI the result is none. Only the temperature will be read. When I'm trying to add f71882fg hwmon driver is says that is in conflict with ACPI. I really need to read the voltages from the motherboard to monitor if there are some fluctuations on 12V and 5V. >From the logs says to use an ACPI driver for that, but I don't know if there is any. There is any solution to solve this? Motherboad: Jetway NF9Q-Q87 CPU: Intel(R) Core(TM) i5-4670T CPU @ 2.30GHz -- Package-specific info: ** Version: Linux version 4.19.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-2)) #1 SMP Debian 4.19.28-2 (2019-03-15) ** Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-4-amd64 root=UUID=b9825d44-0055-4f52-9361-d836aec0a3cb ro 8250.nr_uarts=8 console=tty0 console=ttyS0,115200n8 i915.modeset=0 nomodeset acpi_enforce_resources=lax quiet ** Not tainted ** Kernel log: [ 487.366593] ata1.00: irq_stat 0x08400040, interface fatal error, connection status changed [ 487.374919] ata1: SError: { HostInt PHYRdyChg 10B8B LinkSeq DevExch } [ 487.381428] ata1.00: failed command: WRITE FPDMA QUEUED [ 487.386697] ata1.00: cmd 61/e0:10:00:10:1c/03:00:06:00:00/40 tag 2 ncq dma 507904 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error) [ 487.402647] ata1.00: status: { DRDY } [ 487.406346] ata1.00: failed command: READ FPDMA QUEUED [ 487.411539] ata1.00: cmd 60/08:18:18:10:55/00:00:0a:00:00/40 tag 3 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error) [ 487.427182] ata1.00: status: { DRDY } [ 487.430882] ata1: hard resetting link [ 488.156251] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 488.156283] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 488.165247] ata1.00: configured for UDMA/133 [ 488.165269] ata1: EH complete [ 488.170373] ata4.00: configured for UDMA/133 [ 488.170379] ata4: EH complete [ 488.308244] ata1.00: exception Emask 0x50 SAct 0x8 SErr 0x4890800 action 0xe frozen [ 488.317228] ata1.00: irq_stat 0x08400040, interface fatal error, connection status changed [ 488.326181] ata1: SError: { HostInt PHYRdyChg 10B8B LinkSeq DevExch } [ 488.333264] ata1.00: failed command: WRITE FPDMA QUEUED [ 488.339134] ata1.00: cmd 61/58:18:00:08:1c/05:00:06:00:00/40 tag 3 ncq dma 700416 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error) [ 488.356318] ata1.00: status: { DRDY } [ 488.360689] ata1: hard resetting link [ 488.360698] ata4.00: exception Emask 0x10 SAct 0x800000 SErr 0x4890000 action 0xe frozen [ 488.369475] ata4.00: irq_stat 0x08400040, interface fatal error, connection status changed [ 488.378480] ata4: SError: { PHYRdyChg 10B8B LinkSeq DevExch } [ 488.385025] ata4.00: failed command: WRITE FPDMA QUEUED [ 488.390928] ata4.00: cmd 61/58:b8:00:08:1c/05:00:06:00:00/40 tag 23 ncq dma 700416 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) [ 488.408108] ata4.00: status: { DRDY } [ 488.412429] ata4: hard resetting link [ 489.124251] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 489.137380] ata4.00: configured for UDMA/133 [ 489.137401] ata4: EH complete [ 489.152201] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 489.166215] ata1.00: configured for UDMA/133 [ 489.166229] ata1: EH complete [ 489.528233] ata1: limiting SATA link speed to 3.0 Gbps [ 489.528241] ata1.00: exception Emask 0x50 SAct 0xc00 SErr 0x4890800 action 0xe frozen [ 489.538164] ata1.00: irq_stat 0x08400040, interface fatal error, connection status changed [ 489.547095] ata1: SError: { HostInt PHYRdyChg 10B8B LinkSeq DevExch } [ 489.554168] ata1.00: failed command: WRITE FPDMA QUEUED [ 489.560009] ata1.00: cmd 61/48:50:00:d8:1d/05:00:06:00:00/40 tag 10 ncq dma 692224 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error) [ 489.577197] ata1.00: status: { DRDY } [ 489.581459] ata1.00: failed command: WRITE FPDMA QUEUED [ 489.587327] ata1.00: cmd 61/10:58:48:dd:1d/00:00:06:00:00/40 tag 11 ncq dma 8192 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error) [ 489.604355] ata1.00: status: { DRDY } [ 489.608641] ata1: hard resetting link [ 489.608677] ata4: limiting SATA link speed to 3.0 Gbps [ 489.608679] ata4.00: exception Emask 0x10 SAct 0x3000 SErr 0x4090000 action 0xe frozen [ 489.617208] ata4.00: irq_stat 0x00400040, connection status changed [ 489.624091] ata4: SError: { PHYRdyChg 10B8B DevExch } [ 489.629735] ata4.00: failed command: WRITE FPDMA QUEUED [ 489.635561] ata4.00: cmd 61/48:60:00:d8:1d/05:00:06:00:00/40 tag 12 ncq dma 692224 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) [ 489.652670] ata4.00: status: { DRDY } [ 489.656908] ata4.00: failed command: WRITE FPDMA QUEUED [ 489.662728] ata4.00: cmd 61/10:68:48:dd:1d/00:00:06:00:00/40 tag 13 ncq dma 8192 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) [ 489.679683] ata4.00: status: { DRDY } [ 489.683936] ata4: hard resetting link [ 490.408308] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 490.428969] ata1.00: configured for UDMA/133 [ 490.428995] ata1: EH complete [ 490.436165] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 490.449603] ata4.00: configured for UDMA/133 [ 490.449617] ata4: EH complete [ 508.757816] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 508.789897] Bluetooth: Core ver 2.22 [ 508.789907] NET: Registered protocol family 31 [ 508.789907] Bluetooth: HCI device and connection manager initialized [ 508.789910] Bluetooth: HCI socket layer initialized [ 508.789912] Bluetooth: L2CAP socket layer initialized [ 508.789916] Bluetooth: SCO socket layer initialized [32964.257719] i2c /dev entries driver [33316.733330] f71882fg: Found f81866a chip at 0x290, revision 32 [33316.733373] ACPI Warning: SystemIO range 0x0000000000000290-0x0000000000000297 conflicts with OpRegion 0x0000000000000295-0x0000000000000296 (\_TZ.IP) (20180810/utaddress-213) [33316.733380] ACPI: This conflict may cause random problems and system instability [33316.733381] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [33316.733388] platform f71882fg.656: failed to claim resource 0: [io 0x0290-0x0297] [33316.742195] f71882fg: Device addition failed [33325.377726] f71882fg: Found f81866a chip at 0x290, revision 32 [33325.377757] ACPI Warning: SystemIO range 0x0000000000000290-0x0000000000000297 conflicts with OpRegion 0x0000000000000295-0x0000000000000296 (\_TZ.IP) (20180810/utaddress-213) [33325.377763] ACPI: This conflict may cause random problems and system instability [33325.377764] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [33325.377770] platform f71882fg.656: failed to claim resource 0: [io 0x0290-0x0297] [33325.386402] f71882fg: Device addition failed [34391.474708] version 39.2 [34391.476864] ipmi device interface [34395.191045] mei_me 0000:00:16.0: less data available than length=00000000. [34804.940861] f71882fg: Found f81866a chip at 0x290, revision 32 [34804.940899] ACPI Warning: SystemIO range 0x0000000000000290-0x0000000000000297 conflicts with OpRegion 0x0000000000000295-0x0000000000000296 (\_TZ.IP) (20180810/utaddress-213) [34804.940907] ACPI: This conflict may cause random problems and system instability [34804.940908] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [34804.940916] platform f71882fg.656: failed to claim resource 0: [io 0x0290-0x0297] [34804.950319] f71882fg: Device addition failed ** Model information sys_vendor: product_name: product_version: chassis_vendor: chassis_version: bios_vendor: American Megatrends Inc. bios_version: BF9QAA05 board_vendor: board_name: board_version: ** Loaded modules: acpi_tad sbs sbshc acpi_pad ac acpi_ipmi ipmi_devintf ipmi_msghandler lm78 hwmon_vid bluetooth drbg ansi_cprng ecdh_generic rfkill msr nft_counter ipt_REJECT nf_reject_ipv4 xt_set xt_multiport nft_compat nf_tables binfmt_misc xfrm_user xfrm4_tunnel ipcomp xfrm_ipcomp esp4 ah4 af_key xfrm_algo sit ip_gre gre ipip tunnel4 8021q garp mrp stp llc team_mode_loadbalance team intel_rapl nls_ascii nls_cp437 x86_pkg_temp_thermal intel_powerclamp vfat fat kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul i915 mei_wdt evdev ghash_clmulni_intel intel_cstate drm_kms_helper intel_uncore intel_rapl_perf efi_pstore drm efivars mei_me sg serio_raw pcspkr mei iTCO_wdt iTCO_vendor_support ip_set_hash_netport video button pcc_cpufreq ip_set_hash_ipport ip_set_bitmap_port ip_set_hash_net ip_set_hash_ip ip_set_list_set ip_set_hash_netiface ip_set nfnetlink mpls_iptunnel mpls_router fou ip_tunnel ip6_udp_tunnel udp_tunnel dummy coretemp sunrpc loop efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 fscrypto ecb raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_generic raid0 multipath linear raid1 md_mod sd_mod crc32c_intel ahci libahci libata e1000e psmouse xhci_pci ehci_pci scsi_mod ehci_hcd lpc_ich aesni_intel xhci_hcd aes_x86_64 crypto_simd cryptd glue_helper usbcore i2c_i801 igb i2c_algo_bit usb_common dca thermal fan ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor DRAM Controller [8086:0c00] (rev 06) Subsystem: Intel Corporation 4th Gen Core Processor DRAM Controller [8086:0c00] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: hsw_uncore 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [8086:0c01] (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 26 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: df200000-df9fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 5 Region 0: Memory at f7000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e8000000 (64-bit, prefetchable) [size=128M] Region 4: I/O ports at f000 [size=64] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel modules: i915 00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 05) (prog-if 30 [XHCI]) Subsystem: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 41 Region 0: Memory at f7f20000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04) Subsystem: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller [8086:8c3a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 92 Region 0: Memory at f7f38000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei_me Kernel modules: mei_me 00:16.3 Serial controller [0700]: Intel Corporation 8 Series/C220 Series Chipset Family KT Controller [8086:8c3d] (rev 04) (prog-if 02 [16550]) Subsystem: Intel Corporation 8 Series/C220 Series Chipset Family KT Controller [8086:8c3d] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at f0e0 [size=8] Region 1: Memory at f7f36000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: serial 00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection I217-LM [8086:153a] (rev 05) Subsystem: Intel Corporation Ethernet Connection I217-LM [8086:0000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 39 Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at f7f35000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at f080 [size=32] Capabilities: <access denied> Kernel driver in use: e1000e Kernel modules: e1000e 00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 05) (prog-if 20 [EHCI]) Subsystem: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI [8086:8c2d] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7f34000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 27 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #2 [8086:8c12] (rev d5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 28 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f7b00000-f7dfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 [8086:8c16] (rev d5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 29 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f7e00000-f7efffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 05) (prog-if 20 [EHCI]) Subsystem: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI [8086:8c26] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 23 Region 0: Memory at f7f33000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1f.0 ISA bridge [0601]: Intel Corporation Q87 Express LPC Controller [8086:8c4e] (rev 05) Subsystem: Intel Corporation Q87 Express LPC Controller [8086:8c4e] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 40 Region 0: I/O ports at f0d0 [size=8] Region 1: I/O ports at f0c0 [size=4] Region 2: I/O ports at f0b0 [size=8] Region 3: I/O ports at f0a0 [size=4] Region 4: I/O ports at f060 [size=32] Region 5: Memory at f7f32000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 05) Subsystem: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at f7f31000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at f040 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c_i801 01:00.0 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] Subsystem: Intel Corporation Ethernet Server Adapter I350-T4 [8086:0001] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at df200000 (32-bit, non-prefetchable) [size=1M] Region 3: Memory at df800000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at df600000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: igb Kernel modules: igb 01:00.1 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] Subsystem: Intel Corporation Ethernet Server Adapter I350-T4 [8086:0001] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at df300000 (32-bit, non-prefetchable) [size=1M] Region 3: Memory at df844000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at df680000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: igb Kernel modules: igb 01:00.2 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] Subsystem: Intel Corporation Ethernet Server Adapter I350-T4 [8086:0001] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at df400000 (32-bit, non-prefetchable) [size=1M] Region 3: Memory at df888000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at df700000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: igb Kernel modules: igb 01:00.3 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] Subsystem: Intel Corporation Ethernet Server Adapter I350-T4 [8086:0001] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 19 Region 0: Memory at df500000 (32-bit, non-prefetchable) [size=1M] Region 3: Memory at df8cc000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at df780000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: igb Kernel modules: igb 03:00.0 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at f7c80000 (32-bit, non-prefetchable) [size=512K] Region 2: I/O ports at e020 [size=32] Region 3: Memory at f7d04000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at f7c00000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: igb Kernel modules: igb 03:00.1 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 18 Region 0: Memory at f7b80000 (32-bit, non-prefetchable) [size=512K] Region 2: I/O ports at e000 [size=32] Region 3: Memory at f7d00000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at f7b00000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: igb Kernel modules: igb 04:00.0 Ethernet controller [0200]: Intel Corporation I211 Gigabit Network Connection [8086:1539] (rev 03) Subsystem: Intel Corporation I211 Gigabit Network Connection [8086:0000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at f7e00000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at d000 [size=32] Region 3: Memory at f7e20000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: igb Kernel modules: igb ** USB devices: Bus 003 Device 002: ID 8087:8000 Intel Corp. Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:8008 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 10.0 APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 4.19.0-4-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-4.19.0-4-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.133 ii kmod 26-1 ii linux-base 4.6 Versions of packages linux-image-4.19.0-4-amd64 recommends: ii apparmor 2.13.2-10 ii firmware-linux-free 3.4 ii irqbalance 1.5.0-3 Versions of packages linux-image-4.19.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-efi-amd64 2.02+dfsg1-16 pn linux-doc-4.19 <none> Versions of packages linux-image-4.19.0-4-amd64 is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> pn firmware-misc-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
--- End Message ---
--- Begin Message ---
- To: 927277-done@bugs.debian.org
- Subject: Re: Bug#927277: linux-image-4.19.0-4-amd64: f71882fg hwmon driver conflicts with ACPI
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Wed, 17 Apr 2019 21:45:22 +0100
- Message-id: <728a85b6a9010fcdee2f964055c25ae9df44eaed.camel@decadent.org.uk>
- In-reply-to: <[🔎] 155549293949.20360.16450545512096643159.reportbug@Buh-R1.abtelecom.ro>
- References: <[🔎] 155549293949.20360.16450545512096643159.reportbug@Buh-R1.abtelecom.ro>
On Wed, 2019-04-17 at 12:22 +0300, Adrian Ban wrote: > Package: src:linux > Version: 4.19.28-2 > Severity: normal > > Hi, > > When I'm trying to read voltage and fan speed from the MB which has a f81866a > chip through ACPI the result is none. Only the temperature will be read. > When I'm trying to add f71882fg hwmon driver is says that is in conflict with > ACPI. > > I really need to read the voltages from the motherboard to monitor if there are > some fluctuations on 12V and 5V. > > From the logs says to use an ACPI driver for that, but I don't know if there is > any. > > There is any solution to solve this? This sort of conflict occurs because the system firmware (BIOS) accesses the chip and it's not safe for Linux to do so without coordinating with the BIOS. If the BIOS doesn't provide the information through ACPI (and I don't think ACPI has a standard way to expose voltages, only temperature) it might be possible to read it through a remote management interface. This is not a bug in Debian, so closing the report. Ben. -- Ben Hutchings Make three consecutive correct guesses and you will be considered an expert.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---