Package: linux-image-4.9.0-3-amd64
Version: 4.9.30-2+deb9u3
Laptop does not power down. Screen stays on.
This was working in Debian 8.
This might be related to APM not configured into the kernel?
#grep APM /boot/config-4.9.0-3-amd64
This does not return any options configured into the kernel for APM.
I had a similar issue with a Dell Latitude D505
grep APM config-4.9.0-3-686
CONFIG_X86_APM_BOOT=y
CONFIG_APM=n
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_ALLOW_INTS is not set
I set the CONFIG_AMP=y
This fixed the issue on the Dell Latitude D505.
Dell Vostro 1000 lspci output
lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RS480/RS482/RS485 Host Bridge (rev 10)
00:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RC4xx/RS4xx PCI Bridge [int gfx]
00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RC4xx/RS4xx PCI Express Port 2
00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RC4xx/RS4xx PCI Express Port 3
00:12.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 Non-Raid-5 SATA
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI0)
00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI1)
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI2)
00:13.3 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI3)
00:13.4 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI4)
00:13.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB Controller (EHCI)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 14)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB600 IDE
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB600 PCI to LPC Bridge
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RS482/RS485 [Radeon Xpress 1100/1150]
05:00.0 Network controller: Broadcom Limited BCM4311 802.11a/b/g (rev 01)
08:00.0 Ethernet controller: Broadcom Limited BCM4401-B0 100Base-TX (rev 02)
08:01.0 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
08:01.1 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
dmesg ACPI error messages
dmesg | grep ACPI | grep Erro
[ 0.231956] ACPI Error: Needed type [Reference], found [Device] ffff94a5754a68e8 (20160831/exresop-103)
[ 0.232177] ACPI Error: Method parse/execution failed [\_SB.PCI0._OSC] (Node ffff94a5754b3140), AE_AML_OPERAND_TYPE (20160831/psparse-543)