Bug#863843: bugs.debian.org: Encrypted partition not accessible after resume
On Fri 02-Jun-2017 at 19:03:13 +0200, garjola@garjola.net wrote:
> On Thu 01-Jun-2017 at 23:58:43 +0200, Ben Hutchings <ben@decadent.org.uk> wrote:
>> On Thu, 2017-06-01 at 23:36 +0200, garjola@garjola.net wrote:
>>> On Thu 01-Jun-2017 at 00:15:29 +0200, Ben Hutchings <ben@decadent.org
>>> .uk> wrote:
>>> > Control: tag -1 moreinfo
>>> >
>>> > On Wed, 31 May 2017 21:34:59 +0200 Garjola Dindi <garjola@garjola.net>
>>> > wrote:
>>> > [...]
>>> > > For several weeks now I have been having issues after resume (both
>>> >
>>> > from RAM or from disk): my /home seems not to be accessible (at least
>>> > for writing). This does not happen every time, but more something like
>>> > once every 10 or 20 resume cycles.
>>> > [...]
>>> >
>>> > Please send the messages that appear in the kernel log when you resume.
>>> > (Run 'dmesg' as root to show the kernel log.)
>>> >
>>> > Ben.
>>>
>>> Hi,
>>>
>>> The problem appeared again. I ran dmesg and piped the output to a file
>>> (in one of the non encrypted partitions) just after the problematic
>>> resume, but after reboot (to be able to send this message), the file was
>>> gone.
>>>
>>> Below is the output of dmesg after a fresh reboot and one successful
>>> suspend/resume cycle. I dont't know if is is useful, since the problem
>>> has not happened since the reboot.
>> [...]
>>
>> I really need to see what happens in the failing case.
>>
>> Ben.
>
> Hi,
>
> Here goes the output of dmesg after a failing resume. I have used a usb
> stick to save the output of dmesg so that I could send it to you. This
> is the sdc device which appears at the end of the log.
>
> Thanks.
>
[...]
Hi,
Today, after a failed resume I noticed that hard reset with the power button tries to shutdown and I could see messages like (copied from a picture of the screen, since I don't know how to capture this info):
Timed out stopping /dev/disk/by-id/dm-uuid_CRYPT-LUKS1-......-sda5_crypt.
Timed out stopping /sys/devices/virtual/block/dm-0.
Timed out stopping /dev/disk/by-id/dm-name-sda5_crypt.
Timed out stopping /dev/dm-0.
And also:
(1 of 3) A stop job is running for /dev/mapper/sda5_crypt
(2 of 3) A stop job is running for Disk Manager
Then:
Failed unmounting /boot
Failed unmounting /home
Again, I am attaching the output of dmesg:
[ 0.000000] Linux version 4.9.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-1 (2017-06-04)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.0-3-amd64 root=UUID=98ae6177-1de0-4af2-b905-687df457f1ca ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c70fafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c70fb000-0x00000000c7c7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c7c7f000-0x00000000c7e7efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c7e7f000-0x00000000c7efefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000c7eff000-0x00000000c7efffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7f00000-0x00000000cc7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedf0000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff700000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000008317fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: HP HP EliteBook 840 G3/8079, BIOS N75 Ver. 01.13 11/01/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x831800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 1 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 2 base 00CC000000 mask 7FFC000000 uncachable
[ 0.000000] 3 base 00CA000000 mask 7FFE000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xc7f00 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff9f7680097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x41b92e000, 0x41b92efff] PGTABLE
[ 0.000000] BRK [0x41b92f000, 0x41b92ffff] PGTABLE
[ 0.000000] BRK [0x41b930000, 0x41b930fff] PGTABLE
[ 0.000000] BRK [0x41b931000, 0x41b931fff] PGTABLE
[ 0.000000] BRK [0x41b932000, 0x41b932fff] PGTABLE
[ 0.000000] BRK [0x41b933000, 0x41b933fff] PGTABLE
[ 0.000000] BRK [0x41b934000, 0x41b934fff] PGTABLE
[ 0.000000] BRK [0x41b935000, 0x41b935fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35891000-0x36c3ffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FBE30 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x00000000C7EFD0E8 0000C4 (v01 HPQOEM SLIC-BPC 00000000 01000013)
[ 0.000000] ACPI: FACP 0x00000000C7EF1000 0000F4 (v05 HPQOEM SLIC-BPC 00000000 HP 00000001)
[ 0.000000] ACPI: DSDT 0x00000000C7EC7000 026168 (v02 HPQOEM 8079 00000000 INTL 20121018)
[ 0.000000] ACPI: FACS 0x00000000C7E68000 000040
[ 0.000000] ACPI: SSDT 0x00000000C7EFC000 000108 (v02 HP ShmTable 00000001 INTL 20121018)
[ 0.000000] ACPI: TCPA 0x00000000C7EFA000 000032 (v02 HPQOEM EDK2 00000002 01000013)
[ 0.000000] ACPI: SSDT 0x00000000C7EF9000 0003B8 (v02 HPQOEM TcgTable 00001000 INTL 20121018)
[ 0.000000] ACPI: UEFI 0x00000000C7E7A000 000042 (v01 HPQOEM EDK2 00000002 01000013)
[ 0.000000] ACPI: SSDT 0x00000000C7EF3000 0051FA (v02 SaSsdt SaSsdt 00003000 INTL 20121018)
[ 0.000000] ACPI: SSDT 0x00000000C7EF2000 0005B1 (v01 Intel PerfTune 00001000 INTL 20121018)
[ 0.000000] ACPI: HPET 0x00000000C7EF0000 000038 (v01 HPQOEM 8079 00000001 HP 00000001)
[ 0.000000] ACPI: APIC 0x00000000C7EEF000 0000BC (v01 HPQOEM 8079 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 0x00000000C7EEE000 00003C (v01 HPQOEM 8079 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 0x00000000C7EC6000 00019A (v02 HPQOEM Sata0Ide 00001000 INTL 20121018)
[ 0.000000] ACPI: SSDT 0x00000000C7EC5000 000729 (v01 HPQOEM PtidDevc 00001000 INTL 20121018)
[ 0.000000] ACPI: SSDT 0x00000000C7EC4000 0003DC (v02 HPQOEM SDS_RTD3 00001000 INTL 20121018)
[ 0.000000] ACPI: SSDT 0x00000000C7EC3000 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20121018)
[ 0.000000] ACPI: SSDT 0x00000000C7EC1000 001B5C (v01 HP LAPTOPPC 00001000 INTL 20121018)
[ 0.000000] ACPI: NHLT 0x00000000C7EC0000 00002D (v00 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: ASF! 0x00000000C7EBF000 0000A5 (v32 HPQOEM UYA 00000001 TFSM 000F4240)
[ 0.000000] ACPI: FPDT 0x00000000C7EBE000 000044 (v01 HPQOEM EDK2 00000002 01000013)
[ 0.000000] ACPI: BGRT 0x00000000C7EBD000 000038 (v01 HPQOEM EDK2 00000002 01000013)
[ 0.000000] ACPI: SSDT 0x00000000C7EFB000 000260 (v02 HP PwrCtlEv 00000001 INTL 20121018)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000008317fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x8317fb000-0x8317fffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000008317fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c70fafff]
[ 0.000000] node 0: [mem 0x00000000c7eff000-0x00000000c7efffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000008317fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000008317fffff]
[ 0.000000] On node 0 totalpages: 8358040
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12676 pages used for memmap
[ 0.000000] DMA32 zone: 811260 pages, LIFO batch:31
[ 0.000000] Normal zone: 117856 pages used for memmap
[ 0.000000] Normal zone: 7542784 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000ca800000-0x00000000cc7fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc70fb000-0xc7c7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7c7f000-0xc7e7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7e7f000-0xc7efefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7f00000-0xcc7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfedeffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedf0000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff6fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff700000-0xffffffff]
[ 0.000000] e820: [mem 0xcc800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff9f7eb1400000 s103512 r8192 d31656 u524288
[ 0.000000] pcpu-alloc: s103512 r8192 d31656 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 8227423
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-3-amd64 root=UUID=98ae6177-1de0-4af2-b905-687df457f1ca ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 32805432K/33432160K available (6183K kernel code, 1136K rwdata, 2852K rodata, 1392K init, 688K bss, 626728K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:1024 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 2800.000 MHz processor
[ 0.000017] Calibrating delay loop (skipped), value calculated using timer frequency.. 5616.00 BogoMIPS (lpj=11232000)
[ 0.000018] pid_max: default: 32768 minimum: 301
[ 0.000029] ACPI: Core revision 20160831
[ 0.026521] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.026555] Security Framework initialized
[ 0.026555] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.026559] AppArmor: AppArmor disabled by boot time parameter
[ 0.027691] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.032060] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.033960] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.033978] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.034265] CPU: Physical Processor ID: 0
[ 0.034266] CPU: Processor Core ID: 0
[ 0.034269] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.034269] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.034274] mce: CPU supports 8 MCE banks
[ 0.034281] CPU0: Thermal monitoring enabled (TM1)
[ 0.034293] process: using mwait in idle threads
[ 0.034295] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.034296] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.034800] Freeing SMP alternatives memory: 24K (ffffffffaac7a000 - ffffffffaac80000)
[ 0.037884] ftrace: allocating 25146 entries in 99 pages
[ 0.045705] smpboot: Max logical packages: 2
[ 0.046914] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.051184] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.090876] TSC deadline timer enabled
[ 0.090881] smpboot: CPU0: Intel(R) Core(TM) i7-6600U CPU @ 2.60GHz (family: 0x6, model: 0x4e, stepping: 0x3)
[ 0.090883] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.090907] ... version: 4
[ 0.090908] ... bit width: 48
[ 0.090908] ... generic registers: 4
[ 0.090908] ... value mask: 0000ffffffffffff
[ 0.090909] ... max period: 00007fffffffffff
[ 0.090909] ... fixed-purpose events: 3
[ 0.090909] ... event mask: 000000070000000f
[ 0.091319] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.091388] x86: Booting SMP configuration:
[ 0.091388] .... node #0, CPUs: #1 #2 #3
[ 0.332985] x86: Booted up 1 node, 4 CPUs
[ 0.332986] smpboot: Total of 4 processors activated (22466.72 BogoMIPS)
[ 0.336754] devtmpfs: initialized
[ 0.336799] x86/mm: Memory block size: 128MB
[ 0.339977] PM: Registering ACPI NVS region [mem 0xc7c7f000-0xc7e7efff] (2097152 bytes)
[ 0.340041] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.340047] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.340079] pinctrl core: initialized pinctrl subsystem
[ 0.340166] NET: Registered protocol family 16
[ 0.356187] cpuidle: using governor ladder
[ 0.372210] cpuidle: using governor menu
[ 0.372343] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.372347] ACPI: bus type PCI registered
[ 0.372351] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.372469] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.372470] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.372474] PCI: Using configuration type 1 for base access
[ 0.388490] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.388491] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.388689] ACPI: Added _OSI(Module Device)
[ 0.388690] ACPI: Added _OSI(Processor Device)
[ 0.388690] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.388691] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.389961] ACPI: Executed 17 blocks of module-level executable AML code
[ 0.399070] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.403782] ACPI: Dynamic OEM Table Load:
[ 0.403810] ACPI: SSDT 0xFFFF9F7E8D12C800 0006A2 (v02 PmRef Cpu0Ist 00003000 INTL 20121018)
[ 0.404027] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.405072] ACPI: Dynamic OEM Table Load:
[ 0.405078] ACPI: SSDT 0xFFFF9F7E8D127400 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20121018)
[ 0.405726] ACPI: Dynamic OEM Table Load:
[ 0.405732] ACPI: SSDT 0xFFFF9F7E8D12C000 0005AA (v02 PmRef ApIst 00003000 INTL 20121018)
[ 0.406198] ACPI: Dynamic OEM Table Load:
[ 0.406202] ACPI: SSDT 0xFFFF9F7E8D132000 000119 (v02 PmRef ApCst 00003000 INTL 20121018)
[ 0.407772] ACPI : EC: EC started
[ 0.407772] ACPI : EC: interrupt blocked
[ 3.757350] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 3.757351] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 3.757352] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 3.757353] ACPI: Interpreter enabled
[ 3.757399] ACPI: (supports S0 S3 S4 S5)
[ 3.757399] ACPI: Using IOAPIC for interrupt routing
[ 3.757436] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 3.758608] ACPI: Power Resource [PG01] (on)
[ 3.758946] ACPI: Power Resource [PG02] (on)
[ 3.759296] ACPI: Power Resource [PG00] (on)
[ 3.764036] ACPI: Power Resource [WRST] (on)
[ 3.764208] ACPI: Power Resource [PXP] (on)
[ 3.893805] ACPI: Power Resource [WRST] (on)
[ 3.894204] ACPI: Power Resource [WRST] (on)
[ 3.894695] ACPI: Power Resource [WRST] (on)
[ 3.895087] ACPI: Power Resource [WRST] (on)
[ 3.895503] ACPI: Power Resource [WRST] (on)
[ 3.895897] ACPI: Power Resource [WRST] (on)
[ 3.896290] ACPI: Power Resource [WRST] (on)
[ 3.896681] ACPI: Power Resource [WRST] (on)
[ 3.897072] ACPI: Power Resource [WRST] (on)
[ 3.897468] ACPI: Power Resource [WRST] (on)
[ 3.897861] ACPI: Power Resource [WRST] (on)
[ 3.898221] ACPI: Power Resource [WRST] (on)
[ 3.898581] ACPI: Power Resource [WRST] (on)
[ 3.898941] ACPI: Power Resource [WRST] (on)
[ 3.899305] ACPI: Power Resource [WRST] (on)
[ 3.899665] ACPI: Power Resource [WRST] (on)
[ 3.900026] ACPI: Power Resource [WRST] (on)
[ 3.900386] ACPI: Power Resource [WRST] (on)
[ 3.900745] ACPI: Power Resource [WRST] (on)
[ 3.906103] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 3.906108] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 3.908946] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 3.908947] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 3.910887] PCI host bridge to bus 0000:00
[ 3.910889] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 3.910890] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 3.910890] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 3.910891] pci_bus 0000:00: root bus resource [mem 0xcc800000-0xf7ffffff window]
[ 3.910892] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 3.910893] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 3.910901] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
[ 3.911621] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
[ 3.911629] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff 64bit]
[ 3.911635] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 3.911639] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 3.912404] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 3.912420] pci 0000:00:14.0: reg 0x10: [mem 0xe1220000-0xe122ffff 64bit]
[ 3.912477] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 3.913119] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 3.913155] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 3.913171] pci 0000:00:14.2: reg 0x10: [mem 0xe124b000-0xe124bfff 64bit]
[ 3.913897] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[ 3.914004] pci 0000:00:15.0: reg 0x10: [mem 0xe124c000-0xe124cfff 64bit]
[ 3.915069] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 3.915082] pci 0000:00:16.0: reg 0x10: [mem 0xe124d000-0xe124dfff 64bit]
[ 3.915154] pci 0000:00:16.0: PME# supported from D3hot
[ 3.915781] pci 0000:00:16.3: [8086:9d3d] type 00 class 0x070002
[ 3.915793] pci 0000:00:16.3: reg 0x10: [io 0x3080-0x3087]
[ 3.915800] pci 0000:00:16.3: reg 0x14: [mem 0xe124a000-0xe124afff]
[ 3.916462] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[ 3.916475] pci 0000:00:17.0: reg 0x10: [mem 0xe1248000-0xe1249fff]
[ 3.916482] pci 0000:00:17.0: reg 0x14: [mem 0xe1250000-0xe12500ff]
[ 3.916488] pci 0000:00:17.0: reg 0x18: [io 0x3088-0x308f]
[ 3.916495] pci 0000:00:17.0: reg 0x1c: [io 0x3090-0x3093]
[ 3.916502] pci 0000:00:17.0: reg 0x20: [io 0x3040-0x305f]
[ 3.916509] pci 0000:00:17.0: reg 0x24: [mem 0xe124e000-0xe124e7ff]
[ 3.916544] pci 0000:00:17.0: PME# supported from D3hot
[ 3.917183] pci 0000:00:1c.0: [8086:9d11] type 01 class 0x060400
[ 3.917251] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 3.917854] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 3.917887] pci 0000:00:1c.3: [8086:9d13] type 01 class 0x060400
[ 3.917939] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 3.918522] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 3.918566] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
[ 3.919213] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 3.919223] pci 0000:00:1f.2: reg 0x10: [mem 0xe1240000-0xe1243fff]
[ 3.919861] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040380
[ 3.919883] pci 0000:00:1f.3: reg 0x10: [mem 0xe1244000-0xe1247fff 64bit]
[ 3.919913] pci 0000:00:1f.3: reg 0x20: [mem 0xe1230000-0xe123ffff 64bit]
[ 3.919959] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 3.920550] pci 0000:00:1f.3: System wakeup disabled by ACPI
[ 3.920586] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 3.920632] pci 0000:00:1f.4: reg 0x10: [mem 0xe124f000-0xe124f0ff 64bit]
[ 3.920701] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 3.921365] pci 0000:00:1f.6: [8086:156f] type 00 class 0x020000
[ 3.921383] pci 0000:00:1f.6: reg 0x10: [mem 0xe1200000-0xe121ffff]
[ 3.921474] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 3.922041] pci 0000:00:1f.6: System wakeup disabled by ACPI
[ 3.922146] pci 0000:01:00.0: [10ec:522a] type 00 class 0xff0000
[ 3.922167] pci 0000:01:00.0: reg 0x10: [mem 0xe1000000-0xe1000fff]
[ 3.922314] pci 0000:01:00.0: supports D1 D2
[ 3.922315] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[ 3.922397] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 3.933319] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 3.933322] pci 0000:00:1c.0: bridge window [mem 0xe1000000-0xe10fffff]
[ 3.933436] pci 0000:02:00.0: [8086:24f3] type 00 class 0x028000
[ 3.933471] pci 0000:02:00.0: reg 0x10: [mem 0xe1100000-0xe1101fff 64bit]
[ 3.933699] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 3.933849] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 3.945373] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 3.945377] pci 0000:00:1c.3: bridge window [mem 0xe1100000-0xe11fffff]
[ 3.948074] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 3.948130] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 3.948185] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 3.948240] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 3.948294] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 3.948348] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 3.948401] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 3.948455] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 3.948810] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 3.948855] ACPI : EC: interrupt unblocked
[ 3.948864] ACPI : EC: event unblocked
[ 3.948872] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 3.948873] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 3.948981] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 3.948982] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 3.948984] vgaarb: loaded
[ 3.948984] vgaarb: bridge control possible 0000:00:02.0
[ 3.949044] PCI: Using ACPI for IRQ routing
[ 3.955835] PCI: pci_cache_line_size set to 64 bytes
[ 3.956022] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[ 3.956023] e820: reserve RAM buffer [mem 0xc70fb000-0xc7ffffff]
[ 3.956024] e820: reserve RAM buffer [mem 0xc7f00000-0xc7ffffff]
[ 3.956025] e820: reserve RAM buffer [mem 0x831800000-0x833ffffff]
[ 3.956173] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 3.956177] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 3.958219] clocksource: Switched to clocksource hpet
[ 3.963224] VFS: Disk quotas dquot_6.6.0
[ 3.963246] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.963306] pnp: PnP ACPI init
[ 3.963414] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[ 3.963415] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 3.963416] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 3.963417] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
[ 3.963418] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 3.963420] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.963656] system 00:01: [io 0x2000-0x20fe] has been reserved
[ 3.963657] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.963834] system 00:02: [io 0x0680-0x069f] has been reserved
[ 3.963836] system 00:02: [io 0xffff] has been reserved
[ 3.963837] system 00:02: [io 0xffff] has been reserved
[ 3.963838] system 00:02: [io 0xffff] has been reserved
[ 3.963839] system 00:02: [io 0x1800-0x18fe] has been reserved
[ 3.963839] system 00:02: [io 0x164e-0x164f] has been reserved
[ 3.963841] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.963914] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 3.963940] system 00:04: [io 0x1854-0x1857] has been reserved
[ 3.963941] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 3.963956] pnp 00:05: Plug and Play ACPI device, IDs HPQ8002 PNP0303 (active)
[ 3.963971] pnp 00:06: Plug and Play ACPI device, IDs SYN3037 SYN0100 SYN0002 PNP0f13 (active)
[ 3.964012] system 00:07: [io 0x0200-0x023f] has been reserved
[ 3.964013] system 00:07: [mem 0xfedf0000-0xfedfffff] has been reserved
[ 3.964015] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.964875] system 00:08: [mem 0xfe031000-0xfe031fff] has been reserved
[ 3.964876] system 00:08: [mem 0xfe030008-0xfe030fff] has been reserved
[ 3.964877] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.965207] system 00:09: [mem 0xfe030000-0xfe030007] has been reserved
[ 3.965208] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.965410] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 3.965411] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 3.965412] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 3.965412] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[ 3.965413] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 3.965414] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 3.965415] system 00:0a: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 3.965416] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 3.965417] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 3.965418] system 00:0a: [mem 0xcc800000-0xcc81ffff] has been reserved
[ 3.965419] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.965633] pnp 00:0b: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 3.965742] pnp: PnP ACPI: found 12 devices
[ 3.973045] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 3.973056] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 3.973058] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 3.973067] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 3.973068] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 3.973069] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 3.973070] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 3.973074] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcc900000-0xccafffff 64bit pref]
[ 3.973075] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 3.973076] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 3.973082] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 3.973084] pci 0000:00:1c.0: bridge window [mem 0xe1000000-0xe10fffff]
[ 3.973086] pci 0000:00:1c.0: bridge window [mem 0xcc900000-0xccafffff 64bit pref]
[ 3.973090] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 3.973092] pci 0000:00:1c.3: bridge window [mem 0xe1100000-0xe11fffff]
[ 3.973097] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 3.973098] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 3.973099] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 3.973099] pci_bus 0000:00: resource 7 [mem 0xcc800000-0xf7ffffff window]
[ 3.973100] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 3.973101] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 3.973101] pci_bus 0000:01: resource 1 [mem 0xe1000000-0xe10fffff]
[ 3.973102] pci_bus 0000:01: resource 2 [mem 0xcc900000-0xccafffff 64bit pref]
[ 3.973103] pci_bus 0000:02: resource 1 [mem 0xe1100000-0xe11fffff]
[ 3.973238] NET: Registered protocol family 2
[ 3.973451] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 3.973699] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 3.973810] TCP: Hash tables configured (established 262144 bind 65536)
[ 3.973834] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 3.973901] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 3.973988] NET: Registered protocol family 1
[ 3.973997] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 4.077386] PCI: CLS 0 bytes, default 64
[ 4.077416] Unpacking initramfs...
[ 4.335380] Freeing initrd memory: 20156K (ffff9f76b5891000 - ffff9f76b6c40000)
[ 4.335382] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 4.335384] software IO TLB [mem 0xc30fb000-0xc70fb000] (64MB) mapped at [ffff9f77430fb000-ffff9f77470fafff]
[ 4.335732] audit: initializing netlink subsys (disabled)
[ 4.335746] audit: type=2000 audit(1496910843.328:1): initialized
[ 4.336101] workingset: timestamp_bits=40 max_order=23 bucket_order=0
[ 4.336167] zbud: loaded
[ 4.336963] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 4.337000] io scheduler noop registered
[ 4.337001] io scheduler deadline registered
[ 4.337012] io scheduler cfq registered (default)
[ 4.337465] aer 0000:00:1c.0:pcie002: service driver aer loaded
[ 4.337485] aer 0000:00:1c.3:pcie002: service driver aer loaded
[ 4.337496] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 4.337497] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 4.337501] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[ 4.337509] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 4.337510] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 4.337514] pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded
[ 4.337519] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.337529] pciehp 0000:00:1c.0:pcie004: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 4.337552] pciehp 0000:00:1c.0:pcie004: service driver pciehp loaded
[ 4.337554] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 4.337563] intel_idle: MWAIT substates: 0x11142120
[ 4.337563] intel_idle: v0.4.1 model 0x4E
[ 4.337743] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 4.337925] GHES: HEST is not enabled!
[ 4.337968] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.358791] 0000:00:16.3: ttyS0 at I/O 0x3080 (irq = 19, base_baud = 115200) is a 16550A
[ 4.358964] Linux agpgart interface v0.103
[ 4.406294] tpm_tis 00:0b: 1.2 TPM (device-id 0x1B, rev-id 16)
[ 4.790289] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
[ 4.790351] tpm tpm0: TPM is disabled/deactivated (0x7)
[ 4.790486] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 4.790487] AMD IOMMUv2 functionality not available on this system
[ 4.790781] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 4.792345] i8042: Detected active multiplexing controller, rev 1.1
[ 4.792823] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.792826] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 4.792849] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 4.792867] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 4.792885] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 4.793320] mousedev: PS/2 mouse device common for all mice
[ 4.793370] rtc_cmos 00:03: RTC can wake from S4
[ 4.793922] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 4.794028] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 4.794034] intel_pstate: Intel P-state driver initializing
[ 4.794295] intel_pstate: HWP enabled
[ 4.794693] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.794971] NET: Registered protocol family 10
[ 4.795181] mip6: Mobile IPv6
[ 4.795183] NET: Registered protocol family 17
[ 4.795184] mpls_gso: MPLS GSO support
[ 4.795354] microcode: sig=0x406e3, pf=0x80, revision=0x94
[ 4.795457] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 4.795591] registered taskstats version 1
[ 4.795603] zswap: loaded using pool lzo/zbud
[ 4.818669] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 4.846744] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
[ 4.846839] ima: No TPM chip found, activating TPM-bypass!
[ 4.849791] rtc_cmos 00:03: setting system clock to 2017-06-08 08:34:04 UTC (1496910844)
[ 4.849938] PM: Hibernation image not present or could not be loaded.
[ 4.852535] Freeing unused kernel memory: 1392K (ffffffffaab1e000 - ffffffffaac7a000)
[ 4.852536] Write protecting the kernel read-only data: 12288k
[ 4.852957] Freeing unused kernel memory: 1992K (ffff9f7a9b00e000 - ffff9f7a9b200000)
[ 4.854687] Freeing unused kernel memory: 1244K (ffff9f7a9b4c9000 - ffff9f7a9b600000)
[ 4.858211] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 4.903134] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 4.903179] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 4.903184] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 4.903190] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 4.903687] random: udevadm: uninitialized urandom read (16 bytes read)
[ 4.903706] random: udevadm: uninitialized urandom read (16 bytes read)
[ 4.904392] random: udevadm: uninitialized urandom read (16 bytes read)
[ 4.904423] random: udevadm: uninitialized urandom read (16 bytes read)
[ 4.904451] random: udevadm: uninitialized urandom read (16 bytes read)
[ 4.904478] random: udevadm: uninitialized urandom read (16 bytes read)
[ 4.936424] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.941139] ACPI: bus type USB registered
[ 4.941165] usbcore: registered new interface driver usbfs
[ 4.941174] usbcore: registered new interface driver hub
[ 4.941244] usbcore: registered new device driver usb
[ 4.941424] SCSI subsystem initialized
[ 4.942054] rtsx_pci 0000:01:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 274
[ 4.942932] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 4.942935] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 4.943880] pps_core: LinuxPPS API ver. 1 registered
[ 4.943880] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 4.944082] PTP clock support registered
[ 4.944266] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 4.944270] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 4.944376] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.944377] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.944378] usb usb1: Product: xHCI Host Controller
[ 4.944378] usb usb1: Manufacturer: Linux 4.9.0-3-amd64 xhci-hcd
[ 4.944379] usb usb1: SerialNumber: 0000:00:14.0
[ 4.944546] hub 1-0:1.0: USB hub found
[ 4.944559] hub 1-0:1.0: 12 ports detected
[ 4.944847] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 4.944847] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 4.945646] libata version 3.00 loaded.
[ 4.950484] AVX2 version of gcm_enc/dec engaged.
[ 4.950485] AES CTR mode by8 optimization enabled
[ 4.954547] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.954548] ACPI: Thermal Zone [CPUZ] (47 C)
[ 4.955026] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 4.955030] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 4.955063] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 4.955064] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.955065] usb usb2: Product: xHCI Host Controller
[ 4.955066] usb usb2: Manufacturer: Linux 4.9.0-3-amd64 xhci-hcd
[ 4.955067] usb usb2: SerialNumber: 0000:00:14.0
[ 4.955340] hub 2-0:1.0: USB hub found
[ 4.955357] hub 2-0:1.0: 6 ports detected
[ 4.961704] usb: port power management may be unreliable
[ 4.962935] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 4.964529] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 4.978632] thermal LNXTHERM:01: registered as thermal_zone1
[ 4.978633] ACPI: Thermal Zone [GFXZ] (0 C)
[ 5.009762] thermal LNXTHERM:02: registered as thermal_zone2
[ 5.009765] ACPI: Thermal Zone [EXTZ] (37 C)
[ 5.038176] thermal LNXTHERM:03: registered as thermal_zone3
[ 5.038181] ACPI: Thermal Zone [LOCZ] (31 C)
[ 5.045040] thermal LNXTHERM:04: registered as thermal_zone4
[ 5.045045] ACPI: Thermal Zone [BATZ] (33 C)
[ 5.046354] thermal LNXTHERM:05: registered as thermal_zone5
[ 5.046357] ACPI: Thermal Zone [PCHZ] (127 C)
[ 5.161107] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 5.246352] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 30:e1:71:89:f1:a4
[ 5.246358] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 5.246471] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[ 5.246558] ahci 0000:00:17.0: version 3.0
[ 5.247391] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
[ 5.247440] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x5 impl SATA mode
[ 5.247448] ahci 0000:00:17.0: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
[ 5.249667] scsi host0: ahci
[ 5.250311] scsi host1: ahci
[ 5.250868] scsi host2: ahci
[ 5.251150] ata1: SATA max UDMA/133 abar m2048@0xe124e000 port 0xe124e100 irq 277
[ 5.251155] ata2: DUMMY
[ 5.251166] ata3: SATA max UDMA/133 abar m2048@0xe124e000 port 0xe124e200 irq 277
[ 5.282385] usb 1-7: new full-speed USB device number 2 using xhci_hcd
[ 5.350517] tsc: Refined TSC clocksource calibration: 2807.999 MHz
[ 5.350540] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2879c523a63, max_idle_ns: 440795252908 ns
[ 5.424734] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b
[ 5.424739] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.546669] usb 1-8: new full-speed USB device number 3 using xhci_hcd
[ 5.564973] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5.567200] ata1.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[ 5.567208] ata1.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 5.567726] ata1.00: ATA-9: HGST HTS541010A7E630, SE0OA4G0, max UDMA/133
[ 5.567733] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 5.570304] ata1.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[ 5.570313] ata1.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 5.570845] ata1.00: configured for UDMA/133
[ 5.571841] scsi 0:0:0:0: Direct-Access ATA HGST HTS541010A7 A4G0 PQ: 0 ANSI: 5
[ 5.689611] usb 1-8: New USB device found, idVendor=138a, idProduct=003f
[ 5.689617] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 5.689620] usb 1-8: SerialNumber: 00305e5f579d
[ 5.810303] usb 1-9: new high-speed USB device number 4 using xhci_hcd
[ 5.851001] random: fast init done
[ 5.887285] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input6
[ 5.916806] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5.917971] ata3.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[ 5.918079] ata3.00: ATA-9: SanDisk SD8SN8U-512G-1006, X4120006, max UDMA/133
[ 5.918084] ata3.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 5.920231] ata3.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[ 5.921220] ata3.00: configured for UDMA/133
[ 5.921957] scsi 2:0:0:0: Direct-Access ATA SanDisk SD8SN8U- 0006 PQ: 0 ANSI: 5
[ 5.964169] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 5.964177] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 5.964291] sd 0:0:0:0: [sda] Write Protect is off
[ 5.964315] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.964320] sd 2:0:0:0: [sdb] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[ 5.964322] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 5.964330] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.964434] sd 2:0:0:0: [sdb] Write Protect is off
[ 5.964436] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.964472] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.965024] sdb: sdb1
[ 5.965414] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 5.982985] usb 1-9: New USB device found, idVendor=04ca, idProduct=7054
[ 5.982987] usb 1-9: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 5.982989] usb 1-9: Product: HP HD Camera
[ 5.982990] usb 1-9: Manufacturer: DETNR01BI49DUK
[ 5.982991] usb 1-9: SerialNumber: 200901010001
[ 5.984772] sda: sda1 sda2 < sda5 >
[ 5.985283] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.311481] device-mapper: uevent: version 1.0.3
[ 6.311554] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 6.374888] clocksource: Switched to clocksource tsc
[ 6.677856] psmouse serio3: synaptics: queried max coordinates: x [..5670], y [..4758]
[ 6.713227] psmouse serio3: synaptics: queried min coordinates: x [1360..], y [1198..]
[ 6.778945] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3139, fw id: 2000742
[ 6.821547] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input7
[ 21.070185] random: crng init done
[ 24.068992] NET: Registered protocol family 38
[ 24.612771] PM: Starting manual resume from disk
[ 24.612776] PM: Hibernation image partition 254:2 present
[ 24.612778] PM: Looking for hibernation image.
[ 24.612975] PM: Image not found (code -22)
[ 24.612977] PM: Hibernation image not present or could not be loaded.
[ 24.725730] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 24.831046] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 24.844325] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 24.844631] systemd[1]: Detected architecture x86-64.
[ 24.844856] systemd[1]: Set hostname to <pc-117-162>.
[ 24.940043] systemd[1]: NetworkManager-wait-online.service: Cannot add dependency job, ignoring: Unit NetworkManager-wait-online.service is masked.
[ 24.940055] systemd[1]: acpid.socket: Cannot add dependency job, ignoring: Unit acpid.socket is masked.
[ 24.940080] systemd[1]: acpid.path: Cannot add dependency job, ignoring: Unit acpid.path is masked.
[ 24.940146] systemd[1]: NetworkManager.service: Cannot add dependency job, ignoring: Unit NetworkManager.service is masked.
[ 24.941152] systemd[1]: Created slice User and Session Slice.
[ 24.941222] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 24.941260] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 24.960682] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ 24.963480] RPC: Registered named UNIX socket transport module.
[ 24.963481] RPC: Registered udp transport module.
[ 24.963482] RPC: Registered tcp transport module.
[ 24.963482] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 24.963982] lp: driver loaded but no devices found
[ 24.965451] ppdev: user-space parallel port driver
[ 24.994978] systemd-journald[302]: Received request to flush runtime journal from PID 1
[ 25.074007] Initializing HPQ6001 module
[ 25.074062] input: HP Wireless hotkeys as /devices/virtual/input/input9
[ 25.074411] ACPI: AC Adapter [AC] (on-line)
[ 25.074547] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10
[ 25.074549] ACPI: Sleep Button [SLPB]
[ 25.074690] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input11
[ 25.074692] ACPI: Lid Switch [LID]
[ 25.074742] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input12
[ 25.074744] ACPI: Power Button [PWRF]
[ 25.080321] hp_accel: hardware type HPB64xx found
[ 25.106333] Bluetooth: Core ver 2.22
[ 25.106344] NET: Registered protocol family 31
[ 25.106344] Bluetooth: HCI device and connection manager initialized
[ 25.106347] Bluetooth: HCI socket layer initialized
[ 25.106349] Bluetooth: L2CAP socket layer initialized
[ 25.106355] Bluetooth: SCO socket layer initialized
[ 25.136721] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 25.136752] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 25.138099] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 25.138873] Bluetooth: HCI UART driver ver 2.3
[ 25.138875] Bluetooth: HCI UART protocol H4 registered
[ 25.138875] Bluetooth: HCI UART protocol BCSP registered
[ 25.138876] Bluetooth: HCI UART protocol LL registered
[ 25.138876] Bluetooth: HCI UART protocol ATH3K registered
[ 25.138877] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 25.138898] Bluetooth: HCI UART protocol Intel registered
[ 25.138909] Bluetooth: HCI UART protocol Broadcom registered
[ 25.138910] Bluetooth: HCI UART protocol QCA registered
[ 25.138911] Bluetooth: HCI UART protocol AG6XX registered
[ 25.138911] Bluetooth: HCI UART protocol Marvell registered
[ 25.140876] [drm] Initialized
[ 25.145128] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 25.145829] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 25.149795] iTCO_vendor_support: vendor-support=0
[ 25.150575] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 25.150700] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 25.150797] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 25.162299] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 25.167437] [drm] Memory usable by graphics device = 4096M
[ 25.167438] [drm] Replacing VGA console driver
[ 25.168583] Console: switching to colour dummy device 80x25
[ 25.178285] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 25.178286] [drm] Driver supports precise vblank timestamp query.
[ 25.180784] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 25.181359] Intel(R) Wireless WiFi driver for Linux
[ 25.181359] Copyright(c) 2003- 2015 Intel Corporation
[ 25.182501] i915 0000:00:02.0: firmware: failed to load i915/skl_dmc_ver1_26.bin (-2)
[ 25.182507] i915 0000:00:02.0: Direct firmware load for i915/skl_dmc_ver1_26.bin failed with error -2
[ 25.182509] i915 0000:00:02.0: Failed to load DMC firmware [https://01.org/linuxgraphics/intel-linux-graphics-firmwares], disabling runtime power management.
[ 25.183868] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-8000C-26.ucode (-2)
[ 25.183873] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-26.ucode failed with error -2
[ 25.183882] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-8000C-25.ucode (-2)
[ 25.183885] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-25.ucode failed with error -2
[ 25.183894] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-8000C-24.ucode (-2)
[ 25.183896] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-24.ucode failed with error -2
[ 25.183904] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-8000C-23.ucode (-2)
[ 25.183907] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-23.ucode failed with error -2
[ 25.188104] [drm] GuC firmware load skipped
[ 25.192547] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-8000C-22.ucode
[ 25.193010] iwlwifi 0000:02:00.0: loaded firmware version 22.361476.0 op_mode iwlmvm
[ 25.208882] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
[ 25.210293] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 25.210988] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 25.212177] wl: loading out-of-tree module taints kernel.
[ 25.212181] wl: module license 'MIXED/Proprietary' taints kernel.
[ 25.212181] Disabling lock debugging due to kernel taint
[ 25.220403] lis3lv02d: 8 bits 3DC sensor found
[ 25.239608] input: PC Speaker as /devices/platform/pcspkr/input/input13
[ 25.257570] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 25.257571] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 25.257571] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 25.257571] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 25.257572] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 25.257572] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 25.365413] ACPI: Battery Slot [BAT0] (battery present)
[ 25.365475] wmi: Mapper loaded
[ 25.553015] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff9f7e89708090 (20160831/exresop-594)
[ 25.553025] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20160831/dswexec-461)
[ 25.553033] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff9f7e908a8cf8), AE_AML_OPERAND_TYPE (20160831/psparse-543)
[ 25.553044] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff9f7e908a8190), AE_AML_OPERAND_TYPE (20160831/psparse-543)
[ 25.553821] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff9f7e89708438 (20160831/exresop-594)
[ 25.553830] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20160831/dswexec-461)
[ 25.553839] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff9f7e908a8cf8), AE_AML_OPERAND_TYPE (20160831/psparse-543)
[ 25.553850] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff9f7e908a8190), AE_AML_OPERAND_TYPE (20160831/psparse-543)
[ 25.554944] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff9f7e89708558 (20160831/exresop-594)
[ 25.554953] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20160831/dswexec-461)
[ 25.554962] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff9f7e908a8cf8), AE_AML_OPERAND_TYPE (20160831/psparse-543)
[ 25.554973] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff9f7e908a8190), AE_AML_OPERAND_TYPE (20160831/psparse-543)
[ 25.555035] input: HP WMI hotkeys as /devices/virtual/input/input14
[ 25.557018] ACPI Error: Attempt to CreateField of length zero (20160831/dsopcode-168)
[ 25.557028] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPI] (Node ffff9f7e908a87d0), AE_AML_OPERAND_VALUE (20160831/psparse-543)
[ 25.557041] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff9f7e908a8190), AE_AML_OPERAND_VALUE (20160831/psparse-543)
[ 25.630522] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.638452] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 25.639266] thermal thermal_zone7: failed to read out thermal zone (-5)
[ 25.844204] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 26.048068] Adding 39510012k swap on /dev/mapper/pc--117--162--vg-swap_1. Priority:-1 extents:1 across:39510012k FS
[ 26.048783] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 26.076072] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 26.244475] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 26.558299] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input15
[ 26.565563] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 26.569183] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16
[ 26.569284] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 26.573257] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 26.573939] fbcon: inteldrmfb (fb0) is primary device
[ 26.602032] snd_hda_codec_conexant hdaudioC0D0: CX20724: BIOS auto-probing.
[ 26.602675] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20724: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 26.602676] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 26.602677] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 26.602678] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 26.602679] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 26.602681] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a
[ 26.602682] snd_hda_codec_conexant hdaudioC0D0: Mic=0x19
[ 26.603818] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 26.613774] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 26.614282] kvm: disabled by bios
[ 26.614465] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 26.614534] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 26.614601] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[ 26.614663] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[ 26.630343] intel_rapl: Found RAPL domain package
[ 26.630345] intel_rapl: Found RAPL domain core
[ 26.630346] intel_rapl: Found RAPL domain uncore
[ 26.790779] [drm] RC6 on
[ 26.897652] NET: Registered protocol family 4
[ 26.899639] NET: Registered protocol family 3
[ 26.901044] NET: Registered protocol family 5
[ 26.914339] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 26.914680] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 27.042381] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 27.042780] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 27.131374] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 27.266317] Netfilter messages via NETLINK v0.30.
[ 27.673614] Console: switching to colour frame buffer device 240x67
[ 27.704130] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 27.809465] usbcore: registered new interface driver btusb
[ 27.810118] Bluetooth: hci0: Firmware revision 0.0 build 95 week 37 2016
[ 27.810877] media: Linux media interface: v0.10
[ 27.814212] Linux video capture interface: v2.00
[ 27.818716] uvcvideo: Found UVC 1.00 device HP HD Camera (04ca:7054)
[ 27.821073] uvcvideo 1-9:1.0: Entity type for entity Extension 4 was not initialized!
[ 27.821076] uvcvideo 1-9:1.0: Entity type for entity Processing 2 was not initialized!
[ 27.821078] uvcvideo 1-9:1.0: Entity type for entity Camera 1 was not initialized!
[ 27.821248] input: HP HD Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/input/input22
[ 27.821408] usbcore: registered new interface driver uvcvideo
[ 27.821408] USB Video Class driver (1.1.1)
[ 27.873586] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 27.873588] Bluetooth: BNEP filters: protocol multicast
[ 27.873590] Bluetooth: BNEP socket layer initialized
[ 130.206445] fuse init (API version 7.26)
[ 132.882882] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 132.883677] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 133.013483] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 133.013890] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 133.112157] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 133.457692] e1000e: eth0 NIC Link is Down
[ 133.675645] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 133.822815] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 133.823578] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 133.951704] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 133.952111] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 134.044599] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 139.738075] wlp2s0: authenticate with 7c:f9:0e:77:bf:4b
[ 139.749918] wlp2s0: send auth to 7c:f9:0e:77:bf:4b (try 1/3)
[ 139.759991] wlp2s0: authenticated
[ 139.762611] wlp2s0: associate with 7c:f9:0e:77:bf:4b (try 1/3)
[ 139.781273] wlp2s0: RX AssocResp from 7c:f9:0e:77:bf:4b (capab=0x8431 status=0 aid=2)
[ 139.788332] wlp2s0: associated
[ 139.788468] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 528.460635] atkbd serio0: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0).
[ 528.460643] atkbd serio0: Use 'setkeycodes e005 <keycode>' to make it known.
[ 3600.399637] atkbd serio0: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0).
[ 3600.399644] atkbd serio0: Use 'setkeycodes e005 <keycode>' to make it known.
[ 5234.088525] atkbd serio0: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0).
[ 5234.088533] atkbd serio0: Use 'setkeycodes e005 <keycode>' to make it known.
[ 7753.589665] atkbd serio0: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0).
[ 7753.589674] atkbd serio0: Use 'setkeycodes e005 <keycode>' to make it known.
[11315.442281] e1000e: eth0 NIC Link is Down
[11315.929586] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=600
[11316.161781] EXT4-fs (sda1): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4
[11316.526076] EXT4-fs (dm-1): re-mounted. Opts: data=ordered,commit=600
[11318.914131] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[12269.195238] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[12269.226429] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=0
[12269.306277] EXT4-fs (sda1): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4
[12269.355117] EXT4-fs (dm-1): re-mounted. Opts: data=ordered,commit=0
[18097.973741] atkbd serio0: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0).
[18097.973744] atkbd serio0: Use 'setkeycodes e005 <keycode>' to make it known.
[25250.155390] wlp2s0: deauthenticated from 7c:f9:0e:77:bf:4b (Reason: 3=DEAUTH_LEAVING)
[25254.456752] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[25254.457509] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[25254.586410] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[25254.586817] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[25254.685684] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[25255.007735] e1000e: eth0 NIC Link is Down
[25255.235832] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[25258.270837] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[25258.271628] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[25258.401938] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[25258.402355] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[25258.500473] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[25505.010481] PM: Syncing filesystems ... done.
[25505.014774] PM: Preparing system for sleep (mem)
[25505.015356] (NULL device *): firmware: direct-loading firmware iwlwifi-8000C-22.ucode
[25505.015363] Freezing user space processes ... (elapsed 0.001 seconds) done.
[25505.016693] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[25505.017771] PM: Suspending system (mem)
[25505.017804] Suspending console(s) (use no_console_suspend to debug)
[25505.018231] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[25505.018297] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[25505.018399] sd 0:0:0:0: [sda] Stopping disk
[25505.020239] sd 2:0:0:0: [sdb] Stopping disk
[25505.143451] e1000e: EEE TX LPI TIMER: 00000011
[25505.143684] ACPI : EC: event blocked
[25505.576342] PM: suspend of devices complete after 558.398 msecs
[25505.599409] PM: late suspend of devices complete after 23.036 msecs
[25505.600606] ACPI : EC: interrupt blocked
[25505.603794] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[25505.692114] PM: noirq suspend of devices complete after 92.697 msecs
[25505.693771] ACPI: Preparing to enter system sleep state S3
[25505.696714] ACPI : EC: EC stopped
[25505.696714] PM: Saving platform NVS memory
[25505.696731] Disabling non-boot CPUs ...
[25505.696993] Broke affinity for irq 277
[25505.698305] smpboot: CPU 1 is now offline
[25505.698787] Broke affinity for irq 277
[25505.698788] Broke affinity for irq 279
[25505.700142] smpboot: CPU 2 is now offline
[25505.700502] Broke affinity for irq 1
[25505.700519] Broke affinity for irq 9
[25505.700528] Broke affinity for irq 12
[25505.700568] Broke affinity for irq 275
[25505.700569] Broke affinity for irq 277
[25505.700570] Broke affinity for irq 279
[25505.700571] Broke affinity for irq 280
[25505.701579] smpboot: CPU 3 is now offline
[25505.704933] ACPI: Low-level resume complete
[25505.705069] ACPI : EC: EC started
[25505.705069] PM: Restoring platform NVS memory
[25505.705811] Suspended for 2159.030 seconds
[25505.705879] Enabling non-boot CPUs ...
[25505.705955] x86: Booting SMP configuration:
[25505.705956] smpboot: Booting Node 0 Processor 1 APIC 0x2
[25505.708925] cache: parent cpu1 should not be sleeping
[25505.709220] CPU1 is up
[25505.709277] smpboot: Booting Node 0 Processor 2 APIC 0x1
[25505.712365] cache: parent cpu2 should not be sleeping
[25505.712666] CPU2 is up
[25505.712729] smpboot: Booting Node 0 Processor 3 APIC 0x3
[25505.715587] cache: parent cpu3 should not be sleeping
[25505.715904] CPU3 is up
[25505.721747] ACPI: Waking up from system sleep state S3
[25505.733465] acpi LNXPOWER:17: Turning OFF
[25505.733513] acpi LNXPOWER:16: Turning OFF
[25505.733560] acpi LNXPOWER:15: Turning OFF
[25505.733607] acpi LNXPOWER:14: Turning OFF
[25505.733655] acpi LNXPOWER:13: Turning OFF
[25505.733702] acpi LNXPOWER:12: Turning OFF
[25505.733749] acpi LNXPOWER:11: Turning OFF
[25505.733795] acpi LNXPOWER:10: Turning OFF
[25505.733841] acpi LNXPOWER:0f: Turning OFF
[25505.733888] acpi LNXPOWER:0e: Turning OFF
[25505.733934] acpi LNXPOWER:0d: Turning OFF
[25505.733981] acpi LNXPOWER:0c: Turning OFF
[25505.734028] acpi LNXPOWER:0b: Turning OFF
[25505.734074] acpi LNXPOWER:0a: Turning OFF
[25505.734121] acpi LNXPOWER:09: Turning OFF
[25505.734168] acpi LNXPOWER:08: Turning OFF
[25505.734214] acpi LNXPOWER:07: Turning OFF
[25505.734261] acpi LNXPOWER:06: Turning OFF
[25505.734307] acpi LNXPOWER:05: Turning OFF
[25505.734541] acpi LNXPOWER:04: Turning OFF
[25505.794890] acpi LNXPOWER:03: Turning OFF
[25505.795280] ACPI : EC: interrupt unblocked
[25505.836854] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[25505.951692] PM: noirq resume of devices complete after 156.673 msecs
[25505.951763] pciehp 0000:00:1c.0:pcie004: Slot(1): Card present
[25505.951767] pciehp 0000:00:1c.0:pcie004: Slot(1): Link Up
[25505.952201] pciehp 0000:00:1c.0:pcie004: Slot(1): Link Up event ignored; already powering on
[25505.958170] PM: early resume of devices complete after 6.403 msecs
[25505.958486] usb usb1: root hub lost power or was reset
[25505.958490] usb usb2: root hub lost power or was reset
[25505.959248] sd 2:0:0:0: [sdb] Starting disk
[25505.959264] sd 0:0:0:0: [sda] Starting disk
[25505.960498] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[25505.961303] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[25506.019873] [drm] GuC firmware load skipped
[25506.058798] pciehp 0000:00:1c.0:pcie004: Device 0000:01:00.0 already exists at 0000:01:00, cannot hot-add
[25506.058801] pciehp 0000:00:1c.0:pcie004: Cannot add device at 0000:01:00
[25506.088992] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[25506.089482] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[25506.170791] pciehp 0000:00:1c.0:pcie004: Device 0000:01:00.0 already exists at 0000:01:00, cannot hot-add
[25506.170796] pciehp 0000:00:1c.0:pcie004: Cannot add device at 0000:01:00
[25506.273238] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[25506.273932] ata3.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[25506.275601] ata3.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[25506.276473] ata3.00: configured for UDMA/133
[25506.310849] usb 1-7: reset full-speed USB device number 2 using xhci_hcd
[25506.571173] usb 1-8: reset full-speed USB device number 3 using xhci_hcd
[25506.831063] usb 1-9: reset high-speed USB device number 4 using xhci_hcd
[25507.246925] ACPI : EC: event unblocked
[25507.249906] ACPI : button: The lid device is not compliant to SW_LID.
[25507.249979] rtc_cmos 00:03: System wakeup disabled by ACPI
[25507.358985] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
[25507.358989] tpm tpm0: TPM is disabled/deactivated (0x7)
[25507.363288] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff9f7e8a24da68 (20160831/exresop-594)
[25507.363294] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20160831/dswexec-461)
[25507.363306] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff9f7e908a8cf8), AE_AML_OPERAND_TYPE (20160831/psparse-543)
[25507.363318] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff9f7e908a8190), AE_AML_OPERAND_TYPE (20160831/psparse-543)
[25507.364946] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff9f7e8d377cf0 (20160831/exresop-594)
[25507.364950] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20160831/dswexec-461)
[25507.364960] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff9f7e908a8cf8), AE_AML_OPERAND_TYPE (20160831/psparse-543)
[25507.364970] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff9f7e908a8190), AE_AML_OPERAND_TYPE (20160831/psparse-543)
[25507.365446] PM: resume of devices complete after 1407.317 msecs
[25507.365635] usb 1-7:1.0: rebind failed: -517
[25507.365640] usb 1-7:1.1: rebind failed: -517
[25507.366011] PM: Finishing wakeup.
[25507.366012] Restarting tasks ... done.
[25507.392427] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[25507.399427] Bluetooth: hci0: Device revision is 5
[25507.399429] Bluetooth: hci0: Secure boot is enabled
[25507.399430] Bluetooth: hci0: OTP lock is enabled
[25507.399431] Bluetooth: hci0: API lock is enabled
[25507.399432] Bluetooth: hci0: Debug lock is disabled
[25507.399433] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[25507.408248] [drm] RC6 on
[25507.496768] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=600
[25507.564604] e1000e: eth0 NIC Link is Down
[25507.590735] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[25507.592244] ata1.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[25507.592246] ata1.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out
[25507.594066] ata1.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[25507.594068] ata1.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out
[25507.594248] ata1.00: configured for UDMA/133
[25507.681951] bluetooth hci0: firmware: direct-loading firmware intel/ibt-11-5.sfi
[25507.681955] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[25508.450884] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[25508.622631] psmouse serio3: synaptics: queried max coordinates: x [..5670], y [..4758]
[25508.662004] psmouse serio3: synaptics: queried min coordinates: x [1360..], y [1198..]
[25509.035697] Bluetooth: hci0: Waiting for firmware download to complete
[25509.036433] Bluetooth: hci0: Firmware loaded in 1608929 usecs
[25509.036510] Bluetooth: hci0: Waiting for device to boot
[25509.047458] Bluetooth: hci0: Device booted in 10708 usecs
[25509.098254] bluetooth hci0: firmware: direct-loading firmware intel/ibt-11-5.ddc
[25509.098268] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[25509.102456] Bluetooth: hci0: Applying Intel DDC parameters completed
[25514.218599] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[25514.219365] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[25514.348161] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[25514.348560] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[25514.436526] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[25515.093605] e1000e: eth0 NIC Link is Down
[25515.306938] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[25515.449895] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[25515.450680] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[25515.579471] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[25515.579871] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[25515.671702] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[25518.012488] wlp2s0: authenticate with 40:65:a3:15:37:9e
[25518.021099] wlp2s0: send auth to 40:65:a3:15:37:9e (try 1/3)
[25518.028651] wlp2s0: authenticated
[25518.030407] wlp2s0: associate with 40:65:a3:15:37:9e (try 1/3)
[25518.036415] wlp2s0: RX AssocResp from 40:65:a3:15:37:9e (capab=0x1411 status=0 aid=2)
[25518.038769] wlp2s0: associated
[25518.038845] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[25543.889829] usb 1-1: new high-speed USB device number 6 using xhci_hcd
[25544.030947] usb 1-1: New USB device found, idVendor=8644, idProduct=800f
[25544.030952] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[25544.030954] usb 1-1: Product: USB Flash Disk
[25544.030957] usb 1-1: Manufacturer: General
[25544.030959] usb 1-1: SerialNumber: 0340100000043239
[25554.117222] usb-storage 1-1:1.0: USB Mass Storage device detected
[25554.117898] scsi host3: usb-storage 1-1:1.0
[25554.118094] usbcore: registered new interface driver usb-storage
[25554.124090] usbcore: registered new interface driver uas
[25555.130147] scsi 3:0:0:0: Direct-Access General USB Flash Disk 1.0 PQ: 0 ANSI: 2
[25555.130938] sd 3:0:0:0: Attached scsi generic sg2 type 0
[25555.131256] sd 3:0:0:0: [sdc] 7831552 512-byte logical blocks: (4.01 GB/3.73 GiB)
[25555.131470] sd 3:0:0:0: [sdc] Write Protect is off
[25555.131474] sd 3:0:0:0: [sdc] Mode Sense: 03 00 00 00
[25555.131686] sd 3:0:0:0: [sdc] No Caching mode page found
[25555.131693] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[25555.133717] sdc: sdc1
[25555.134876] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[25569.658152] UDF-fs: warning (device sdc1): udf_load_vrs: No VRS found
[25569.658156] UDF-fs: warning (device sdc1): udf_fill_super: No partition found (2)
[25569.661772] UDF-fs: warning (device sdc1): udf_load_vrs: No VRS found
[25569.661776] UDF-fs: warning (device sdc1): udf_fill_super: No partition found (2)
[25569.689547] ISOFS: Unable to identify CD-ROM format.
[25569.713548] ISOFS: Unable to identify CD-ROM format.
[25569.727531] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Thanks.
--
Dr. Dindi
Dad, Philosopher, Hacker
Reply to: