Bug#863843: bugs.debian.org: Encrypted partition not accessible after resume
On Thu 01-Jun-2017 at 00:15:29 +0200, Ben Hutchings <ben@decadent.org.uk> wrote:
> Control: tag -1 moreinfo
>
> On Wed, 31 May 2017 21:34:59 +0200 Garjola Dindi <garjola@garjola.net>
> wrote:
> [...]
>> For several weeks now I have been having issues after resume (both
> from RAM or from disk): my /home seems not to be accessible (at least
> for writing). This does not happen every time, but more something like
> once every 10 or 20 resume cycles.
> [...]
>
> Please send the messages that appear in the kernel log when you resume.
> (Run 'dmesg' as root to show the kernel log.)
>
> Ben.
Hi,
The problem appeared again. I ran dmesg and piped the output to a file
(in one of the non encrypted partitions) just after the problematic
resume, but after reboot (to be able to send this message), the file was
gone.
Below is the output of dmesg after a fresh reboot and one successful
suspend/resume cycle. I dont't know if is is useful, since the problem
has not happened since the reboot.
Thanks.
[ 0.000000] Linux version 4.9.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170425 (Debian 6.3.0-16) ) #1 SMP Debian 4.9.25-1 (2017-05-02)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.0-3-amd64 root=UUID=98ae6177-1de0-4af2-b905-687df457f1ca ro quiet resume=/dev/mapper/pc--117--162--vg-swap_1
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c70fafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c70fb000-0x00000000c7c7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c7c7f000-0x00000000c7e7efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c7e7f000-0x00000000c7efefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000c7eff000-0x00000000c7efffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7f00000-0x00000000cc7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedf0000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff700000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000008317fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: HP HP EliteBook 840 G3/8079, BIOS N75 Ver. 01.13 11/01/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x831800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 1 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 2 base 00CC000000 mask 7FFC000000 uncachable
[ 0.000000] 3 base 00CA000000 mask 7FFE000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xc7f00 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff884280097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x6c7b2e000, 0x6c7b2efff] PGTABLE
[ 0.000000] BRK [0x6c7b2f000, 0x6c7b2ffff] PGTABLE
[ 0.000000] BRK [0x6c7b30000, 0x6c7b30fff] PGTABLE
[ 0.000000] BRK [0x6c7b31000, 0x6c7b31fff] PGTABLE
[ 0.000000] BRK [0x6c7b32000, 0x6c7b32fff] PGTABLE
[ 0.000000] BRK [0x6c7b33000, 0x6c7b33fff] PGTABLE
[ 0.000000] BRK [0x6c7b34000, 0x6c7b34fff] PGTABLE
[ 0.000000] BRK [0x6c7b35000, 0x6c7b35fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35893000-0x36c40fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FBE30 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x00000000C7EFD0E8 0000C4 (v01 HPQOEM SLIC-BPC 00000000 01000013)
[ 0.000000] ACPI: FACP 0x00000000C7EF1000 0000F4 (v05 HPQOEM SLIC-BPC 00000000 HP 00000001)
[ 0.000000] ACPI: DSDT 0x00000000C7EC7000 026168 (v02 HPQOEM 8079 00000000 INTL 20121018)
[ 0.000000] ACPI: FACS 0x00000000C7E68000 000040
[ 0.000000] ACPI: SSDT 0x00000000C7EFC000 000108 (v02 HP ShmTable 00000001 INTL 20121018)
[ 0.000000] ACPI: TCPA 0x00000000C7EFA000 000032 (v02 HPQOEM EDK2 00000002 01000013)
[ 0.000000] ACPI: SSDT 0x00000000C7EF9000 0003B8 (v02 HPQOEM TcgTable 00001000 INTL 20121018)
[ 0.000000] ACPI: UEFI 0x00000000C7E7A000 000042 (v01 HPQOEM EDK2 00000002 01000013)
[ 0.000000] ACPI: SSDT 0x00000000C7EF3000 0051FA (v02 SaSsdt SaSsdt 00003000 INTL 20121018)
[ 0.000000] ACPI: SSDT 0x00000000C7EF2000 0005B1 (v01 Intel PerfTune 00001000 INTL 20121018)
[ 0.000000] ACPI: HPET 0x00000000C7EF0000 000038 (v01 HPQOEM 8079 00000001 HP 00000001)
[ 0.000000] ACPI: APIC 0x00000000C7EEF000 0000BC (v01 HPQOEM 8079 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 0x00000000C7EEE000 00003C (v01 HPQOEM 8079 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 0x00000000C7EC6000 00019A (v02 HPQOEM Sata0Ide 00001000 INTL 20121018)
[ 0.000000] ACPI: SSDT 0x00000000C7EC5000 000729 (v01 HPQOEM PtidDevc 00001000 INTL 20121018)
[ 0.000000] ACPI: SSDT 0x00000000C7EC4000 0003DC (v02 HPQOEM SDS_RTD3 00001000 INTL 20121018)
[ 0.000000] ACPI: SSDT 0x00000000C7EC3000 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20121018)
[ 0.000000] ACPI: SSDT 0x00000000C7EC1000 001B5C (v01 HP LAPTOPPC 00001000 INTL 20121018)
[ 0.000000] ACPI: NHLT 0x00000000C7EC0000 00002D (v00 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: ASF! 0x00000000C7EBF000 0000A5 (v32 HPQOEM UYA 00000001 TFSM 000F4240)
[ 0.000000] ACPI: FPDT 0x00000000C7EBE000 000044 (v01 HPQOEM EDK2 00000002 01000013)
[ 0.000000] ACPI: BGRT 0x00000000C7EBD000 000038 (v01 HPQOEM EDK2 00000002 01000013)
[ 0.000000] ACPI: SSDT 0x00000000C7EFB000 000260 (v02 HP PwrCtlEv 00000001 INTL 20121018)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000008317fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x8317fb000-0x8317fffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000008317fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c70fafff]
[ 0.000000] node 0: [mem 0x00000000c7eff000-0x00000000c7efffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000008317fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000008317fffff]
[ 0.000000] On node 0 totalpages: 8358040
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12676 pages used for memmap
[ 0.000000] DMA32 zone: 811260 pages, LIFO batch:31
[ 0.000000] Normal zone: 117856 pages used for memmap
[ 0.000000] Normal zone: 7542784 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000ca800000-0x00000000cc7fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc70fb000-0xc7c7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7c7f000-0xc7e7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7e7f000-0xc7efefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7f00000-0xcc7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfedeffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedf0000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff6fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff700000-0xffffffff]
[ 0.000000] e820: [mem 0xcc800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff884ab1400000 s103512 r8192 d31656 u524288
[ 0.000000] pcpu-alloc: s103512 r8192 d31656 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 8227423
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-3-amd64 root=UUID=98ae6177-1de0-4af2-b905-687df457f1ca ro quiet resume=/dev/mapper/pc--117--162--vg-swap_1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 32805436K/33432160K available (6179K kernel code, 1136K rwdata, 2852K rodata, 1392K init, 688K bss, 626724K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:1024 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 2800.000 MHz processor
[ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 5616.00 BogoMIPS (lpj=11232000)
[ 0.000024] pid_max: default: 32768 minimum: 301
[ 0.000038] ACPI: Core revision 20160831
[ 0.036067] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.036113] Security Framework initialized
[ 0.036114] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.036118] AppArmor: AppArmor disabled by boot time parameter
[ 0.037677] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.043585] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.046194] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.046219] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.046558] CPU: Physical Processor ID: 0
[ 0.046559] CPU: Processor Core ID: 0
[ 0.046563] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.046564] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.046569] mce: CPU supports 8 MCE banks
[ 0.046577] CPU0: Thermal monitoring enabled (TM1)
[ 0.046593] process: using mwait in idle threads
[ 0.046596] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.046596] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.047021] Freeing SMP alternatives memory: 24K (ffffffffb727a000 - ffffffffb7280000)
[ 0.050178] ftrace: allocating 25141 entries in 99 pages
[ 0.060513] smpboot: Max logical packages: 2
[ 0.061717] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.065968] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.105659] TSC deadline timer enabled
[ 0.105664] smpboot: CPU0: Intel(R) Core(TM) i7-6600U CPU @ 2.60GHz (family: 0x6, model: 0x4e, stepping: 0x3)
[ 0.105667] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.105696] ... version: 4
[ 0.105697] ... bit width: 48
[ 0.105697] ... generic registers: 4
[ 0.105698] ... value mask: 0000ffffffffffff
[ 0.105698] ... max period: 00007fffffffffff
[ 0.105699] ... fixed-purpose events: 3
[ 0.105699] ... event mask: 000000070000000f
[ 0.106231] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.106320] x86: Booting SMP configuration:
[ 0.106321] .... node #0, CPUs: #1 #2 #3
[ 0.347801] x86: Booted up 1 node, 4 CPUs
[ 0.347803] smpboot: Total of 4 processors activated (22467.67 BogoMIPS)
[ 0.352455] devtmpfs: initialized
[ 0.352516] x86/mm: Memory block size: 128MB
[ 0.357910] PM: Registering ACPI NVS region [mem 0xc7c7f000-0xc7e7efff] (2097152 bytes)
[ 0.357992] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.357999] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.358039] pinctrl core: initialized pinctrl subsystem
[ 0.358145] NET: Registered protocol family 16
[ 0.371791] cpuidle: using governor ladder
[ 0.387813] cpuidle: using governor menu
[ 0.387959] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.387963] ACPI: bus type PCI registered
[ 0.387967] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.388062] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.388064] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.388067] PCI: Using configuration type 1 for base access
[ 0.404089] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.404090] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.404286] ACPI: Added _OSI(Module Device)
[ 0.404287] ACPI: Added _OSI(Processor Device)
[ 0.404287] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.404288] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.405537] ACPI: Executed 17 blocks of module-level executable AML code
[ 0.414608] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.419247] ACPI: Dynamic OEM Table Load:
[ 0.419275] ACPI: SSDT 0xFFFF884A8D12C800 0006A2 (v02 PmRef Cpu0Ist 00003000 INTL 20121018)
[ 0.419489] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.420516] ACPI: Dynamic OEM Table Load:
[ 0.420522] ACPI: SSDT 0xFFFF884A8D127C00 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20121018)
[ 0.421150] ACPI: Dynamic OEM Table Load:
[ 0.421156] ACPI: SSDT 0xFFFF884A8D12C000 0005AA (v02 PmRef ApIst 00003000 INTL 20121018)
[ 0.421615] ACPI: Dynamic OEM Table Load:
[ 0.421620] ACPI: SSDT 0xFFFF884A8D132400 000119 (v02 PmRef ApCst 00003000 INTL 20121018)
[ 0.423151] ACPI : EC: EC started
[ 0.423151] ACPI : EC: interrupt blocked
[ 3.844524] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 3.844525] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 3.844526] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 3.844527] ACPI: Interpreter enabled
[ 3.844572] ACPI: (supports S0 S3 S4 S5)
[ 3.844572] ACPI: Using IOAPIC for interrupt routing
[ 3.844608] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 3.845785] ACPI: Power Resource [PG01] (on)
[ 3.846113] ACPI: Power Resource [PG02] (on)
[ 3.846455] ACPI: Power Resource [PG00] (on)
[ 3.851717] ACPI: Power Resource [WRST] (on)
[ 3.851948] ACPI: Power Resource [PXP] (on)
[ 3.980912] ACPI: Power Resource [WRST] (on)
[ 3.981298] ACPI: Power Resource [WRST] (on)
[ 3.981775] ACPI: Power Resource [WRST] (on)
[ 3.982153] ACPI: Power Resource [WRST] (on)
[ 3.982554] ACPI: Power Resource [WRST] (on)
[ 3.982932] ACPI: Power Resource [WRST] (on)
[ 3.983309] ACPI: Power Resource [WRST] (on)
[ 3.983687] ACPI: Power Resource [WRST] (on)
[ 3.984063] ACPI: Power Resource [WRST] (on)
[ 3.984442] ACPI: Power Resource [WRST] (on)
[ 3.984822] ACPI: Power Resource [WRST] (on)
[ 3.985168] ACPI: Power Resource [WRST] (on)
[ 3.985515] ACPI: Power Resource [WRST] (on)
[ 3.985861] ACPI: Power Resource [WRST] (on)
[ 3.986210] ACPI: Power Resource [WRST] (on)
[ 3.986556] ACPI: Power Resource [WRST] (on)
[ 3.986902] ACPI: Power Resource [WRST] (on)
[ 3.987248] ACPI: Power Resource [WRST] (on)
[ 3.987594] ACPI: Power Resource [WRST] (on)
[ 3.992843] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 3.992847] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 3.995340] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 3.995341] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 3.997126] PCI host bridge to bus 0000:00
[ 3.997128] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 3.997129] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 3.997130] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 3.997131] pci_bus 0000:00: root bus resource [mem 0xcc800000-0xf7ffffff window]
[ 3.997132] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 3.997133] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 3.997140] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
[ 3.997837] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
[ 3.997846] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff 64bit]
[ 3.997852] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 3.997855] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 3.998616] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 3.998632] pci 0000:00:14.0: reg 0x10: [mem 0xe1220000-0xe122ffff 64bit]
[ 3.998691] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 3.999409] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 3.999444] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 3.999459] pci 0000:00:14.2: reg 0x10: [mem 0xe124b000-0xe124bfff 64bit]
[ 4.000256] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[ 4.000402] pci 0000:00:15.0: reg 0x10: [mem 0xe124c000-0xe124cfff 64bit]
[ 4.001583] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 4.001604] pci 0000:00:16.0: reg 0x10: [mem 0xe124d000-0xe124dfff 64bit]
[ 4.001668] pci 0000:00:16.0: PME# supported from D3hot
[ 4.002369] pci 0000:00:16.3: [8086:9d3d] type 00 class 0x070002
[ 4.002382] pci 0000:00:16.3: reg 0x10: [io 0x3080-0x3087]
[ 4.002388] pci 0000:00:16.3: reg 0x14: [mem 0xe124a000-0xe124afff]
[ 4.003121] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[ 4.003135] pci 0000:00:17.0: reg 0x10: [mem 0xe1248000-0xe1249fff]
[ 4.003142] pci 0000:00:17.0: reg 0x14: [mem 0xe1250000-0xe12500ff]
[ 4.003149] pci 0000:00:17.0: reg 0x18: [io 0x3088-0x308f]
[ 4.003156] pci 0000:00:17.0: reg 0x1c: [io 0x3090-0x3093]
[ 4.003163] pci 0000:00:17.0: reg 0x20: [io 0x3040-0x305f]
[ 4.003169] pci 0000:00:17.0: reg 0x24: [mem 0xe124e000-0xe124e7ff]
[ 4.003206] pci 0000:00:17.0: PME# supported from D3hot
[ 4.003918] pci 0000:00:1c.0: [8086:9d11] type 01 class 0x060400
[ 4.003974] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 4.004692] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 4.004728] pci 0000:00:1c.3: [8086:9d13] type 01 class 0x060400
[ 4.004786] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 4.005483] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 4.005529] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
[ 4.006292] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 4.006303] pci 0000:00:1f.2: reg 0x10: [mem 0xe1240000-0xe1243fff]
[ 4.007050] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040380
[ 4.007072] pci 0000:00:1f.3: reg 0x10: [mem 0xe1244000-0xe1247fff 64bit]
[ 4.007105] pci 0000:00:1f.3: reg 0x20: [mem 0xe1230000-0xe123ffff 64bit]
[ 4.007154] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 4.007858] pci 0000:00:1f.3: System wakeup disabled by ACPI
[ 4.007894] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 4.007940] pci 0000:00:1f.4: reg 0x10: [mem 0xe124f000-0xe124f0ff 64bit]
[ 4.008008] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 4.008783] pci 0000:00:1f.6: [8086:156f] type 00 class 0x020000
[ 4.008802] pci 0000:00:1f.6: reg 0x10: [mem 0xe1200000-0xe121ffff]
[ 4.008899] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 4.009575] pci 0000:00:1f.6: System wakeup disabled by ACPI
[ 4.009667] pci 0000:01:00.0: [10ec:522a] type 00 class 0xff0000
[ 4.009688] pci 0000:01:00.0: reg 0x10: [mem 0xe1000000-0xe1000fff]
[ 4.009822] pci 0000:01:00.0: supports D1 D2
[ 4.009823] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[ 4.009915] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 4.020472] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 4.020476] pci 0000:00:1c.0: bridge window [mem 0xe1000000-0xe10fffff]
[ 4.020590] pci 0000:02:00.0: [8086:24f3] type 00 class 0x028000
[ 4.020626] pci 0000:02:00.0: reg 0x10: [mem 0xe1100000-0xe1101fff 64bit]
[ 4.020856] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 4.021053] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 4.032540] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 4.032543] pci 0000:00:1c.3: bridge window [mem 0xe1100000-0xe11fffff]
[ 4.035209] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 4.035255] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 4.035299] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 4.035344] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 4.035389] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 4.035432] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 4.035475] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 4.035519] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 4.035863] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 4.035906] ACPI : EC: interrupt unblocked
[ 4.035912] ACPI : EC: event unblocked
[ 4.035919] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 4.035921] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 4.036028] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 4.036029] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 4.036031] vgaarb: loaded
[ 4.036031] vgaarb: bridge control possible 0000:00:02.0
[ 4.036090] PCI: Using ACPI for IRQ routing
[ 4.042873] PCI: pci_cache_line_size set to 64 bytes
[ 4.043044] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[ 4.043045] e820: reserve RAM buffer [mem 0xc70fb000-0xc7ffffff]
[ 4.043046] e820: reserve RAM buffer [mem 0xc7f00000-0xc7ffffff]
[ 4.043047] e820: reserve RAM buffer [mem 0x831800000-0x833ffffff]
[ 4.043196] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 4.043200] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 4.045241] clocksource: Switched to clocksource hpet
[ 4.050817] VFS: Disk quotas dquot_6.6.0
[ 4.050838] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 4.050905] pnp: PnP ACPI init
[ 4.051034] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[ 4.051036] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 4.051037] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 4.051038] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
[ 4.051039] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 4.051041] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 4.051327] system 00:01: [io 0x2000-0x20fe] has been reserved
[ 4.051328] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 4.051542] system 00:02: [io 0x0680-0x069f] has been reserved
[ 4.051543] system 00:02: [io 0xffff] has been reserved
[ 4.051543] system 00:02: [io 0xffff] has been reserved
[ 4.051544] system 00:02: [io 0xffff] has been reserved
[ 4.051545] system 00:02: [io 0x1800-0x18fe] has been reserved
[ 4.051546] system 00:02: [io 0x164e-0x164f] has been reserved
[ 4.051548] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 4.051637] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 4.051669] system 00:04: [io 0x1854-0x1857] has been reserved
[ 4.051670] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 4.051689] pnp 00:05: Plug and Play ACPI device, IDs HPQ8002 PNP0303 (active)
[ 4.051707] pnp 00:06: Plug and Play ACPI device, IDs SYN3037 SYN0100 SYN0002 PNP0f13 (active)
[ 4.051757] system 00:07: [io 0x0200-0x023f] has been reserved
[ 4.051759] system 00:07: [mem 0xfedf0000-0xfedfffff] has been reserved
[ 4.051760] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 4.052797] system 00:08: [mem 0xfe031000-0xfe031fff] has been reserved
[ 4.052798] system 00:08: [mem 0xfe030008-0xfe030fff] has been reserved
[ 4.052799] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 4.053199] system 00:09: [mem 0xfe030000-0xfe030007] has been reserved
[ 4.053200] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 4.053465] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 4.053466] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 4.053467] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 4.053468] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[ 4.053469] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 4.053470] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 4.053471] system 00:0a: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 4.053472] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 4.053473] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 4.053474] system 00:0a: [mem 0xcc800000-0xcc81ffff] has been reserved
[ 4.053475] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 4.053706] pnp 00:0b: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 4.053840] pnp: PnP ACPI: found 12 devices
[ 4.060637] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 4.060646] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 4.060648] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 4.060656] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 4.060657] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 4.060658] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 4.060659] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 4.060663] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcc900000-0xccafffff 64bit pref]
[ 4.060665] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 4.060667] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 4.060669] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 4.060672] pci 0000:00:1c.0: bridge window [mem 0xe1000000-0xe10fffff]
[ 4.060674] pci 0000:00:1c.0: bridge window [mem 0xcc900000-0xccafffff 64bit pref]
[ 4.060678] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 4.060680] pci 0000:00:1c.3: bridge window [mem 0xe1100000-0xe11fffff]
[ 4.060686] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 4.060687] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 4.060688] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 4.060689] pci_bus 0000:00: resource 7 [mem 0xcc800000-0xf7ffffff window]
[ 4.060690] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 4.060690] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 4.060691] pci_bus 0000:01: resource 1 [mem 0xe1000000-0xe10fffff]
[ 4.060692] pci_bus 0000:01: resource 2 [mem 0xcc900000-0xccafffff 64bit pref]
[ 4.060693] pci_bus 0000:02: resource 1 [mem 0xe1100000-0xe11fffff]
[ 4.060840] NET: Registered protocol family 2
[ 4.061011] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 4.061310] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 4.061419] TCP: Hash tables configured (established 262144 bind 65536)
[ 4.061445] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 4.061516] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 4.061608] NET: Registered protocol family 1
[ 4.061619] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 4.171819] PCI: CLS 0 bytes, default 64
[ 4.171855] Unpacking initramfs...
[ 4.487386] Freeing initrd memory: 20152K (ffff8842b5893000 - ffff8842b6c41000)
[ 4.487389] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 4.487391] software IO TLB [mem 0xc30fb000-0xc70fb000] (64MB) mapped at [ffff8843430fb000-ffff8843470fafff]
[ 4.487693] audit: initializing netlink subsys (disabled)
[ 4.487709] audit: type=2000 audit(1496352007.476:1): initialized
[ 4.488104] workingset: timestamp_bits=40 max_order=23 bucket_order=0
[ 4.488187] zbud: loaded
[ 4.489145] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 4.489189] io scheduler noop registered
[ 4.489190] io scheduler deadline registered
[ 4.489201] io scheduler cfq registered (default)
[ 4.489721] aer 0000:00:1c.0:pcie002: service driver aer loaded
[ 4.489739] aer 0000:00:1c.3:pcie002: service driver aer loaded
[ 4.489749] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 4.489750] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 4.489752] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[ 4.489758] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 4.489759] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 4.489761] pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded
[ 4.489766] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.489773] pciehp 0000:00:1c.0:pcie004: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 4.489795] pciehp 0000:00:1c.0:pcie004: service driver pciehp loaded
[ 4.489798] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 4.489809] intel_idle: MWAIT substates: 0x11142120
[ 4.489809] intel_idle: v0.4.1 model 0x4E
[ 4.489992] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 4.490168] GHES: HEST is not enabled!
[ 4.490217] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.511012] 0000:00:16.3: ttyS0 at I/O 0x3080 (irq = 19, base_baud = 115200) is a 16550A
[ 4.511185] Linux agpgart interface v0.103
[ 4.557309] tpm_tis 00:0b: 1.2 TPM (device-id 0x1B, rev-id 16)
[ 4.941311] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
[ 4.941368] tpm tpm0: TPM is disabled/deactivated (0x7)
[ 4.941507] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 4.941508] AMD IOMMUv2 functionality not available on this system
[ 4.941793] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 4.943323] i8042: Detected active multiplexing controller, rev 1.1
[ 4.943926] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.943929] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 4.943953] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 4.943973] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 4.943991] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 4.944404] mousedev: PS/2 mouse device common for all mice
[ 4.944448] rtc_cmos 00:03: RTC can wake from S4
[ 4.944999] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 4.945080] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 4.945086] intel_pstate: Intel P-state driver initializing
[ 4.945356] intel_pstate: HWP enabled
[ 4.945520] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.945776] NET: Registered protocol family 10
[ 4.945987] mip6: Mobile IPv6
[ 4.945988] NET: Registered protocol family 17
[ 4.945990] mpls_gso: MPLS GSO support
[ 4.946163] microcode: sig=0x406e3, pf=0x80, revision=0x94
[ 4.946222] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 4.946333] registered taskstats version 1
[ 4.946346] zswap: loaded using pool lzo/zbud
[ 4.970449] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 4.993615] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
[ 4.993708] ima: No TPM chip found, activating TPM-bypass!
[ 4.996949] rtc_cmos 00:03: setting system clock to 2017-06-01 21:20:08 UTC (1496352008)
[ 4.997131] PM: Checking hibernation image partition /dev/mapper/pc--117--162--vg-swap_1
[ 4.997139] PM: Hibernation image not present or could not be loaded.
[ 4.999349] Freeing unused kernel memory: 1392K (ffffffffb711e000 - ffffffffb727a000)
[ 4.999350] Write protecting the kernel read-only data: 12288k
[ 4.999759] Freeing unused kernel memory: 1996K (ffff88494720d000 - ffff884947400000)
[ 5.001549] Freeing unused kernel memory: 1244K (ffff8849476c9000 - ffff884947800000)
[ 5.005189] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 5.057319] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 5.057384] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 5.057391] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 5.057400] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 5.058066] random: udevadm: uninitialized urandom read (16 bytes read)
[ 5.058090] random: udevadm: uninitialized urandom read (16 bytes read)
[ 5.058872] random: udevadm: uninitialized urandom read (16 bytes read)
[ 5.058906] random: udevadm: uninitialized urandom read (16 bytes read)
[ 5.058936] random: udevadm: uninitialized urandom read (16 bytes read)
[ 5.058965] random: udevadm: uninitialized urandom read (16 bytes read)
[ 5.092094] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.096782] ACPI: bus type USB registered
[ 5.096806] usbcore: registered new interface driver usbfs
[ 5.096814] usbcore: registered new interface driver hub
[ 5.096851] usbcore: registered new device driver usb
[ 5.097445] SCSI subsystem initialized
[ 5.098214] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 5.098219] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 5.098518] rtsx_pci 0000:01:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 274
[ 5.099098] libata version 3.00 loaded.
[ 5.099343] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 5.099355] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 5.099481] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.099482] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.099484] usb usb1: Product: xHCI Host Controller
[ 5.099485] usb usb1: Manufacturer: Linux 4.9.0-3-amd64 xhci-hcd
[ 5.099486] usb usb1: SerialNumber: 0000:00:14.0
[ 5.099633] hub 1-0:1.0: USB hub found
[ 5.099649] hub 1-0:1.0: 12 ports detected
[ 5.100374] pps_core: LinuxPPS API ver. 1 registered
[ 5.100375] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 5.100591] PTP clock support registered
[ 5.102149] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 5.102150] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 5.107704] AVX2 version of gcm_enc/dec engaged.
[ 5.107705] AES CTR mode by8 optimization enabled
[ 5.112314] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 5.112318] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 5.112356] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 5.112357] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.112359] usb usb2: Product: xHCI Host Controller
[ 5.112360] usb usb2: Manufacturer: Linux 4.9.0-3-amd64 xhci-hcd
[ 5.112361] usb usb2: SerialNumber: 0000:00:14.0
[ 5.112493] hub 2-0:1.0: USB hub found
[ 5.112506] hub 2-0:1.0: 6 ports detected
[ 5.116471] usb: port power management may be unreliable
[ 5.117824] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.117825] ACPI: Thermal Zone [CPUZ] (32 C)
[ 5.117948] ahci 0000:00:17.0: version 3.0
[ 5.118163] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
[ 5.118188] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x5 impl SATA mode
[ 5.118191] ahci 0000:00:17.0: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
[ 5.118856] scsi host0: ahci
[ 5.118984] scsi host1: ahci
[ 5.119119] scsi host2: ahci
[ 5.119178] ata1: SATA max UDMA/133 abar m2048@0xe124e000 port 0xe124e100 irq 276
[ 5.119179] ata2: DUMMY
[ 5.119181] ata3: SATA max UDMA/133 abar m2048@0xe124e000 port 0xe124e200 irq 276
[ 5.119379] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 5.148306] thermal LNXTHERM:01: registered as thermal_zone1
[ 5.148307] ACPI: Thermal Zone [GFXZ] (0 C)
[ 5.171576] thermal LNXTHERM:02: registered as thermal_zone2
[ 5.171578] ACPI: Thermal Zone [EXTZ] (27 C)
[ 5.193837] thermal LNXTHERM:03: registered as thermal_zone3
[ 5.193838] ACPI: Thermal Zone [LOCZ] (24 C)
[ 5.203847] thermal LNXTHERM:04: registered as thermal_zone4
[ 5.203848] ACPI: Thermal Zone [BATZ] (24 C)
[ 5.204309] thermal LNXTHERM:05: registered as thermal_zone5
[ 5.204311] ACPI: Thermal Zone [PCHZ] (127 C)
[ 5.331926] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 5.417065] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 30:e1:71:89:f1:a4
[ 5.417073] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 5.417208] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[ 5.418121] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 5.438853] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5.440982] ata1.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[ 5.440989] ata1.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 5.441193] ata1.00: ATA-9: HGST HTS541010A7E630, SE0OA4G0, max UDMA/133
[ 5.441198] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 5.441337] usb 1-7: new full-speed USB device number 2 using xhci_hcd
[ 5.443517] ata1.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[ 5.443525] ata1.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 5.444070] ata1.00: configured for UDMA/133
[ 5.445140] scsi 0:0:0:0: Direct-Access ATA HGST HTS541010A7 A4G0 PQ: 0 ANSI: 5
[ 5.509671] tsc: Refined TSC clocksource calibration: 2807.989 MHz
[ 5.509696] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2879bbf0a17, max_idle_ns: 440795299209 ns
[ 5.583992] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b
[ 5.583998] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.705617] usb 1-8: new full-speed USB device number 3 using xhci_hcd
[ 5.792542] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5.793830] ata3.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[ 5.793942] ata3.00: ATA-9: SanDisk SD8SN8U-512G-1006, X4120006, max UDMA/133
[ 5.793947] ata3.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 5.796444] ata3.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[ 5.797659] ata3.00: configured for UDMA/133
[ 5.798617] scsi 2:0:0:0: Direct-Access ATA SanDisk SD8SN8U- 0006 PQ: 0 ANSI: 5
[ 5.843143] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 5.843145] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 5.843169] sd 0:0:0:0: [sda] Write Protect is off
[ 5.843172] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.843182] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.843312] sd 2:0:0:0: [sdb] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[ 5.843314] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 5.843513] sd 2:0:0:0: [sdb] Write Protect is off
[ 5.843516] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.843562] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.844305] sdb: sdb1
[ 5.844729] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 5.851351] usb 1-8: New USB device found, idVendor=138a, idProduct=003f
[ 5.851352] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 5.851353] usb 1-8: SerialNumber: 00305e5f579d
[ 5.891595] sda: sda1 sda2 < sda5 >
[ 5.892731] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.904051] random: fast init done
[ 6.021787] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input6
[ 6.029316] usb 1-9: new high-speed USB device number 4 using xhci_hcd
[ 6.203804] usb 1-9: New USB device found, idVendor=04ca, idProduct=7054
[ 6.203813] usb 1-9: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 6.203817] usb 1-9: Product: HP HD Camera
[ 6.203821] usb 1-9: Manufacturer: DETNR01BI49DUK
[ 6.203824] usb 1-9: SerialNumber: 200901010001
[ 6.222325] device-mapper: uevent: version 1.0.3
[ 6.222551] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 6.533816] clocksource: Switched to clocksource tsc
[ 6.796708] psmouse serio3: synaptics: queried max coordinates: x [..5670], y [..4758]
[ 6.830944] psmouse serio3: synaptics: queried min coordinates: x [1360..], y [1198..]
[ 6.895635] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3139, fw id: 2000742
[ 6.937470] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input7
[ 10.354959] random: crng init done
[ 14.096750] NET: Registered protocol family 38
[ 15.041022] PM: Starting manual resume from disk
[ 15.041028] PM: Hibernation image partition 254:2 present
[ 15.041029] PM: Looking for hibernation image.
[ 15.041192] PM: Image not found (code -22)
[ 15.041194] PM: Hibernation image not present or could not be loaded.
[ 15.379584] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 15.495936] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.509923] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 15.510225] systemd[1]: Detected architecture x86-64.
[ 15.510454] systemd[1]: Set hostname to <pc-117-162>.
[ 15.611739] systemd[1]: acpid.socket: Cannot add dependency job, ignoring: Unit acpid.socket is masked.
[ 15.611749] systemd[1]: acpid.path: Cannot add dependency job, ignoring: Unit acpid.path is masked.
[ 15.611766] systemd[1]: NetworkManager-wait-online.service: Cannot add dependency job, ignoring: Unit NetworkManager-wait-online.service is masked.
[ 15.611874] systemd[1]: NetworkManager.service: Cannot add dependency job, ignoring: Unit NetworkManager.service is masked.
[ 15.612524] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 15.612597] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 15.612625] systemd[1]: Listening on LVM2 poll daemon socket.
[ 15.629723] lp: driver loaded but no devices found
[ 15.631022] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ 15.637403] ppdev: user-space parallel port driver
[ 15.654108] RPC: Registered named UNIX socket transport module.
[ 15.654109] RPC: Registered udp transport module.
[ 15.654110] RPC: Registered tcp transport module.
[ 15.654110] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 15.664644] systemd-journald[300]: Received request to flush runtime journal from PID 1
[ 15.754945] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input9
[ 15.754950] ACPI: Sleep Button [SLPB]
[ 15.755056] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input10
[ 15.755058] ACPI: Lid Switch [LID]
[ 15.755123] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input11
[ 15.755126] ACPI: Power Button [PWRF]
[ 15.756181] Initializing HPQ6001 module
[ 15.757247] ACPI: AC Adapter [AC] (off-line)
[ 15.757319] input: HP Wireless hotkeys as /devices/virtual/input/input12
[ 15.771332] ACPI: Battery Slot [BAT0] (battery present)
[ 15.781623] hp_accel: hardware type HPB64xx found
[ 15.795626] wmi: Mapper loaded
[ 15.801076] Bluetooth: Core ver 2.22
[ 15.801088] NET: Registered protocol family 31
[ 15.801089] Bluetooth: HCI device and connection manager initialized
[ 15.801092] Bluetooth: HCI socket layer initialized
[ 15.801094] Bluetooth: L2CAP socket layer initialized
[ 15.801100] Bluetooth: SCO socket layer initialized
[ 15.803790] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 15.806300] Bluetooth: HCI UART driver ver 2.3
[ 15.806301] Bluetooth: HCI UART protocol H4 registered
[ 15.806302] Bluetooth: HCI UART protocol BCSP registered
[ 15.806306] Bluetooth: HCI UART protocol LL registered
[ 15.806308] Bluetooth: HCI UART protocol ATH3K registered
[ 15.806310] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 15.806854] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 15.806894] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 15.808142] Bluetooth: HCI UART protocol Intel registered
[ 15.808159] Bluetooth: HCI UART protocol Broadcom registered
[ 15.808160] Bluetooth: HCI UART protocol QCA registered
[ 15.808160] Bluetooth: HCI UART protocol AG6XX registered
[ 15.808161] Bluetooth: HCI UART protocol Marvell registered
[ 15.813059] iTCO_vendor_support: vendor-support=0
[ 15.815330] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 15.815471] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 15.816411] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 15.816667] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 15.816786] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.817376] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 15.817759] [drm] Initialized
[ 15.834789] input: PC Speaker as /devices/platform/pcspkr/input/input13
[ 15.848655] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 15.848657] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 15.848658] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 15.848658] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 15.848659] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 15.848660] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 15.852049] Intel(R) Wireless WiFi driver for Linux
[ 15.852050] Copyright(c) 2003- 2015 Intel Corporation
[ 15.857036] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-8000C-26.ucode (-2)
[ 15.857108] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-26.ucode failed with error -2
[ 15.857122] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-8000C-25.ucode (-2)
[ 15.857190] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-25.ucode failed with error -2
[ 15.857200] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-8000C-24.ucode (-2)
[ 15.857291] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-24.ucode failed with error -2
[ 15.857301] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-8000C-23.ucode (-2)
[ 15.857361] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-23.ucode failed with error -2
[ 15.874873] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-8000C-22.ucode
[ 15.875487] iwlwifi 0000:02:00.0: loaded firmware version 22.361476.0 op_mode iwlmvm
[ 15.877547] [drm] Memory usable by graphics device = 4096M
[ 15.877549] [drm] Replacing VGA console driver
[ 15.879520] Console: switching to colour dummy device 80x25
[ 15.881176] kvm: disabled by bios
[ 15.891740] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 15.891742] [drm] Driver supports precise vblank timestamp query.
[ 15.892698] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
[ 15.893008] intel_rapl: Found RAPL domain package
[ 15.893010] intel_rapl: Found RAPL domain core
[ 15.893012] intel_rapl: Found RAPL domain uncore
[ 15.893340] i915 0000:00:02.0: firmware: failed to load i915/skl_dmc_ver1_26.bin (-2)
[ 15.893348] i915 0000:00:02.0: Direct firmware load for i915/skl_dmc_ver1_26.bin failed with error -2
[ 15.893350] i915 0000:00:02.0: Failed to load DMC firmware [https://01.org/linuxgraphics/intel-linux-graphics-firmwares], disabling runtime power management.
[ 15.894095] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 15.894838] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 15.895748] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 15.903542] wl: loading out-of-tree module taints kernel.
[ 15.903546] wl: module license 'MIXED/Proprietary' taints kernel.
[ 15.903546] Disabling lock debugging due to kernel taint
[ 15.908042] lis3lv02d: 8 bits 3DC sensor found
[ 15.917669] [drm] GuC firmware load skipped
[ 15.983336] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff884a894fc798 (20160831/exresop-594)
[ 15.983349] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20160831/dswexec-461)
[ 15.983361] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff884a908a8988), AE_AML_OPERAND_TYPE (20160831/psparse-543)
[ 15.983375] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff884a908a87a8), AE_AML_OPERAND_TYPE (20160831/psparse-543)
[ 15.984377] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff884a894fc9d8 (20160831/exresop-594)
[ 15.984388] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20160831/dswexec-461)
[ 15.984400] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff884a908a8988), AE_AML_OPERAND_TYPE (20160831/psparse-543)
[ 15.984414] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff884a908a87a8), AE_AML_OPERAND_TYPE (20160831/psparse-543)
[ 15.994103] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff884a894fc240 (20160831/exresop-594)
[ 15.994119] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20160831/dswexec-461)
[ 15.994133] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff884a908a8988), AE_AML_OPERAND_TYPE (20160831/psparse-543)
[ 15.994212] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff884a908a87a8), AE_AML_OPERAND_TYPE (20160831/psparse-543)
[ 15.995116] input: HP WMI hotkeys as /devices/virtual/input/input14
[ 15.999240] ACPI Error: Attempt to CreateField of length zero (20160831/dsopcode-168)
[ 15.999255] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPI] (Node ffff884a908a8190), AE_AML_OPERAND_VALUE (20160831/psparse-543)
[ 15.999273] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff884a908a87a8), AE_AML_OPERAND_VALUE (20160831/psparse-543)
[ 16.030485] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 16.030791] thermal thermal_zone8: failed to read out thermal zone (-5)
[ 16.107555] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 16.175261] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=600
[ 16.764719] Adding 39510012k swap on /dev/mapper/pc--117--162--vg-swap_1. Priority:-1 extents:1 across:39510012k FS
[ 17.193344] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input15
[ 17.202876] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 17.206084] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16
[ 17.207176] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 17.207184] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 17.210452] fbcon: inteldrmfb (fb0) is primary device
[ 17.227292] snd_hda_codec_conexant hdaudioC0D0: CX20724: BIOS auto-probing.
[ 17.227902] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20724: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 17.227903] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 17.227904] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 17.227904] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 17.227905] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 17.227906] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a
[ 17.227907] snd_hda_codec_conexant hdaudioC0D0: Mic=0x19
[ 17.228971] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 17.237140] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 17.239372] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 17.239429] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 17.239480] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[ 17.239535] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[ 17.829810] [drm] RC6 on
[ 18.295879] Console: switching to colour frame buffer device 240x67
[ 18.316004] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=600
[ 18.316859] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 19.668715] media: Linux media interface: v0.10
[ 19.672336] Linux video capture interface: v2.00
[ 19.738663] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=600
[ 19.797607] uvcvideo: Found UVC 1.00 device HP HD Camera (04ca:7054)
[ 19.799799] uvcvideo 1-9:1.0: Entity type for entity Extension 4 was not initialized!
[ 19.799803] uvcvideo 1-9:1.0: Entity type for entity Processing 2 was not initialized!
[ 19.799804] uvcvideo 1-9:1.0: Entity type for entity Camera 1 was not initialized!
[ 19.799897] input: HP HD Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/input/input22
[ 19.799959] usbcore: registered new interface driver uvcvideo
[ 19.799960] USB Video Class driver (1.1.1)
[ 20.444641] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 20.515494] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 20.878339] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=600
[ 20.926687] EXT4-fs (sda1): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4
[ 22.097876] usbcore: registered new interface driver btusb
[ 22.100333] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[ 22.107348] Bluetooth: hci0: Device revision is 5
[ 22.107352] Bluetooth: hci0: Secure boot is enabled
[ 22.107355] Bluetooth: hci0: OTP lock is enabled
[ 22.107357] Bluetooth: hci0: API lock is enabled
[ 22.107359] Bluetooth: hci0: Debug lock is disabled
[ 22.107363] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 22.117589] bluetooth hci0: firmware: direct-loading firmware intel/ibt-11-5.sfi
[ 22.117597] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[ 22.212329] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=600
[ 22.294670] EXT4-fs (sda1): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4
[ 23.370354] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=600
[ 23.461345] EXT4-fs (sda1): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4
[ 23.479186] Bluetooth: hci0: Waiting for firmware download to complete
[ 23.479275] Bluetooth: hci0: Firmware loaded in 1349093 usecs
[ 23.479306] Bluetooth: hci0: Waiting for device to boot
[ 23.490308] Bluetooth: hci0: Device booted in 10754 usecs
[ 23.497324] bluetooth hci0: firmware: direct-loading firmware intel/ibt-11-5.ddc
[ 23.497328] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[ 23.498308] Bluetooth: hci0: Failed to send Intel_Write_DDC (-22)
[ 29.657288] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 29.892565] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 29.892566] Bluetooth: BNEP filters: protocol multicast
[ 29.892570] Bluetooth: BNEP socket layer initialized
[ 30.110849] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=600
[ 30.160739] EXT4-fs (sda1): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4
[ 30.171903] EXT4-fs (dm-1): re-mounted. Opts: data=ordered,commit=600
[ 30.640021] NET: Registered protocol family 4
[ 30.642362] NET: Registered protocol family 3
[ 30.654011] NET: Registered protocol family 5
[ 30.681307] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 30.681700] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 30.816665] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 30.817060] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 30.900638] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 31.052388] Netfilter messages via NETLINK v0.30.
[ 36.665562] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 39.752981] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 39.753753] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 39.882221] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 39.882621] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 39.982244] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 40.216050] e1000e: eth0 NIC Link is Down
[ 40.441408] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 40.600022] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 40.600734] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 40.731235] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 40.731635] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 40.823716] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 46.419303] wlp2s0: authenticate with 40:65:a3:15:37:9e
[ 46.432185] wlp2s0: send auth to 40:65:a3:15:37:9e (try 1/3)
[ 46.440268] wlp2s0: authenticated
[ 46.444705] wlp2s0: associate with 40:65:a3:15:37:9e (try 1/3)
[ 46.448494] wlp2s0: RX AssocResp from 40:65:a3:15:37:9e (capab=0x1411 status=0 aid=3)
[ 46.456029] wlp2s0: associated
[ 46.456135] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 69.755860] fuse init (API version 7.26)
[ 736.630419] PM: Syncing filesystems ... done.
[ 736.859880] PM: Preparing system for sleep (mem)
[ 736.860616] (NULL device *): firmware: direct-loading firmware intel/ibt-11-5.ddc
[ 736.861067] (NULL device *): firmware: direct-loading firmware intel/ibt-11-5.sfi
[ 736.861609] (NULL device *): firmware: direct-loading firmware iwlwifi-8000C-22.ucode
[ 736.861645] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 736.863504] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 736.864764] PM: Suspending system (mem)
[ 736.864833] Suspending console(s) (use no_console_suspend to debug)
[ 736.974636] wlp2s0: deauthenticating from 40:65:a3:15:37:9e by local choice (Reason: 3=DEAUTH_LEAVING)
[ 736.974900] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[ 736.975194] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 736.982212] sd 2:0:0:0: [sdb] Stopping disk
[ 737.102167] ACPI : EC: event blocked
[ 737.187537] sd 0:0:0:0: [sda] Stopping disk
[ 737.738942] PM: suspend of devices complete after 764.935 msecs
[ 737.765913] PM: late suspend of devices complete after 26.964 msecs
[ 737.766724] ACPI : EC: interrupt blocked
[ 737.769262] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 737.850329] PM: noirq suspend of devices complete after 84.412 msecs
[ 737.851371] ACPI: Preparing to enter system sleep state S3
[ 737.853435] ACPI : EC: EC stopped
[ 737.853436] PM: Saving platform NVS memory
[ 737.853488] Disabling non-boot CPUs ...
[ 737.855038] smpboot: CPU 1 is now offline
[ 737.855578] Broke affinity for irq 275
[ 737.855580] Broke affinity for irq 280
[ 737.856907] smpboot: CPU 2 is now offline
[ 737.857274] Broke affinity for irq 1
[ 737.857291] Broke affinity for irq 9
[ 737.857300] Broke affinity for irq 12
[ 737.857340] Broke affinity for irq 275
[ 737.857341] Broke affinity for irq 276
[ 737.857343] Broke affinity for irq 279
[ 737.857344] Broke affinity for irq 280
[ 737.858358] smpboot: CPU 3 is now offline
[ 737.861033] ACPI: Low-level resume complete
[ 737.861150] ACPI : EC: EC started
[ 737.861151] PM: Restoring platform NVS memory
[ 737.861881] Suspended for 6.361 seconds
[ 737.861922] Enabling non-boot CPUs ...
[ 737.861974] x86: Booting SMP configuration:
[ 737.861975] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 737.864619] cache: parent cpu1 should not be sleeping
[ 737.864821] CPU1 is up
[ 737.864856] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 737.867497] cache: parent cpu2 should not be sleeping
[ 737.867681] CPU2 is up
[ 737.867716] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 737.870199] cache: parent cpu3 should not be sleeping
[ 737.870396] CPU3 is up
[ 737.874187] ACPI: Waking up from system sleep state S3
[ 737.884577] acpi LNXPOWER:17: Turning OFF
[ 737.884606] acpi LNXPOWER:16: Turning OFF
[ 737.884634] acpi LNXPOWER:15: Turning OFF
[ 737.884662] acpi LNXPOWER:14: Turning OFF
[ 737.884690] acpi LNXPOWER:13: Turning OFF
[ 737.884726] acpi LNXPOWER:12: Turning OFF
[ 737.884754] acpi LNXPOWER:11: Turning OFF
[ 737.884782] acpi LNXPOWER:10: Turning OFF
[ 737.884809] acpi LNXPOWER:0f: Turning OFF
[ 737.884837] acpi LNXPOWER:0e: Turning OFF
[ 737.884864] acpi LNXPOWER:0d: Turning OFF
[ 737.884892] acpi LNXPOWER:0c: Turning OFF
[ 737.884919] acpi LNXPOWER:0b: Turning OFF
[ 737.884947] acpi LNXPOWER:0a: Turning OFF
[ 737.884974] acpi LNXPOWER:09: Turning OFF
[ 737.885002] acpi LNXPOWER:08: Turning OFF
[ 737.885029] acpi LNXPOWER:07: Turning OFF
[ 737.885057] acpi LNXPOWER:06: Turning OFF
[ 737.885085] acpi LNXPOWER:05: Turning OFF
[ 737.885234] acpi LNXPOWER:04: Turning OFF
[ 737.948830] acpi LNXPOWER:03: Turning OFF
[ 737.949209] ACPI : EC: interrupt unblocked
[ 737.990828] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 738.105583] PM: noirq resume of devices complete after 156.630 msecs
[ 738.105655] pciehp 0000:00:1c.0:pcie004: Slot(1): Card present
[ 738.105658] pciehp 0000:00:1c.0:pcie004: Slot(1): Link Up
[ 738.106086] pciehp 0000:00:1c.0:pcie004: Slot(1): Link Up event ignored; already powering on
[ 738.123678] PM: early resume of devices complete after 18.014 msecs
[ 738.124048] usb usb1: root hub lost power or was reset
[ 738.124052] usb usb2: root hub lost power or was reset
[ 738.124593] sd 0:0:0:0: [sda] Starting disk
[ 738.124613] sd 2:0:0:0: [sdb] Starting disk
[ 738.126648] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 738.127457] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 738.185983] [drm] GuC firmware load skipped
[ 738.212803] pciehp 0000:00:1c.0:pcie004: Device 0000:01:00.0 already exists at 0000:01:00, cannot hot-add
[ 738.212806] pciehp 0000:00:1c.0:pcie004: Cannot add device at 0000:01:00
[ 738.255579] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 738.255966] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 738.320749] pciehp 0000:00:1c.0:pcie004: Device 0000:01:00.0 already exists at 0000:01:00, cannot hot-add
[ 738.320753] pciehp 0000:00:1c.0:pcie004: Cannot add device at 0000:01:00
[ 738.439823] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 738.440504] ata3.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[ 738.443243] ata3.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[ 738.444497] ata3.00: configured for UDMA/133
[ 738.473157] usb 1-8: reset full-speed USB device number 3 using xhci_hcd
[ 738.733036] usb 1-9: reset high-speed USB device number 4 using xhci_hcd
[ 738.993207] usb 1-7: reset full-speed USB device number 2 using xhci_hcd
[ 739.404809] ACPI : EC: event unblocked
[ 739.406014] ACPI : button: The lid device is not compliant to SW_LID.
[ 739.406084] rtc_cmos 00:03: System wakeup disabled by ACPI
[ 739.516981] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
[ 739.516984] tpm tpm0: TPM is disabled/deactivated (0x7)
[ 739.521038] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff884a870a1af8 (20160831/exresop-594)
[ 739.521044] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20160831/dswexec-461)
[ 739.521056] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff884a908a8988), AE_AML_OPERAND_TYPE (20160831/psparse-543)
[ 739.521067] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff884a908a87a8), AE_AML_OPERAND_TYPE (20160831/psparse-543)
[ 739.522718] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff884a8622b1b0 (20160831/exresop-594)
[ 739.522722] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20160831/dswexec-461)
[ 739.522732] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff884a908a8988), AE_AML_OPERAND_TYPE (20160831/psparse-543)
[ 739.522742] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff884a908a87a8), AE_AML_OPERAND_TYPE (20160831/psparse-543)
[ 739.523204] PM: resume of devices complete after 1399.560 msecs
[ 739.523423] usb 1-7:1.0: rebind failed: -517
[ 739.523429] usb 1-7:1.1: rebind failed: -517
[ 739.523978] PM: Finishing wakeup.
[ 739.523981] Restarting tasks ... done.
[ 739.527374] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[ 739.534371] Bluetooth: hci0: Device revision is 5
[ 739.534372] Bluetooth: hci0: Secure boot is enabled
[ 739.534373] Bluetooth: hci0: OTP lock is enabled
[ 739.534373] Bluetooth: hci0: API lock is enabled
[ 739.534374] Bluetooth: hci0: Debug lock is disabled
[ 739.534375] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 739.534377] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[ 739.586818] [drm] RC6 on
[ 739.756684] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 739.758298] ata1.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[ 739.758303] ata1.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 739.760186] ata1.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[ 739.760191] ata1.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 739.760386] ata1.00: configured for UDMA/133
[ 740.723407] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 740.724236] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 740.807391] psmouse serio3: synaptics: queried max coordinates: x [..5670], y [..4758]
[ 740.837249] psmouse serio3: synaptics: queried min coordinates: x [1360..], y [1198..]
[ 740.852553] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 740.852914] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 740.943348] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 741.185540] e1000e: eth0 NIC Link is Down
[ 741.256308] Bluetooth: hci0: Waiting for firmware download to complete
[ 741.256378] Bluetooth: hci0: Firmware loaded in 1689614 usecs
[ 741.256413] Bluetooth: hci0: Waiting for device to boot
[ 741.267406] Bluetooth: hci0: Device booted in 10762 usecs
[ 741.267418] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[ 741.268413] Bluetooth: hci0: Failed to send Intel_Write_DDC (-22)
[ 741.405046] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 745.020624] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 745.021399] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 745.158637] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 745.159037] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 745.258394] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 748.987711] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 748.988508] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 749.119218] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 749.119718] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 749.221934] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 749.907404] e1000e: eth0 NIC Link is Down
[ 750.129204] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 750.300500] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 750.301245] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 750.430632] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 750.431032] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 750.526811] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
--
Dr. Dindi
Dad, Philosopher, Hacker
Reply to: