Bug#883935: linux-image-4.9.0-4-amd64: i915 GPU hang after every suspend or hibernate (Hang on render ring)
Package: src:linux
Version: 4.9.65-3
Followup-For: Bug #883935
Dear Maintainer,
I have the same issue, and I find it very annoying. As a workaround I use kernel linux-image-4.12.0-1-amd64, which mostly
manages to wake correctly from hibernation. But honestly, I'm a bit overstrained in using a testing kernel on an otherwise
stable system. I was hoping that the recent update of 4.9.0 kernel maybe fixed the issue, but unfortunately not. It would
be very nice if this could be fixed with a future update.
Thank you in advance!
Christoph
-- Package-specific info:
** Version:
Linux version 4.9.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.65-3 (2017-12-03)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.9.0-4-amd64 root=UUID=39cb1350-d7bf-43e6-9a89-f1821f0ae9b9 ro quiet i915.preliminary_hw_support=1
** Tainted: PUO (4161)
* Proprietary module has been loaded.
* Userspace-defined naughtiness.
* Out-of-tree module has been loaded.
** Kernel log:
[ 167.358244] ata1.00: supports DRM functions and may not be fully accessible
[ 167.358695] ata1.00: configured for UDMA/133
[ 167.383405] usb 1-4: reset high-speed USB device number 2 using xhci_hcd
[ 167.643093] usb 1-7: reset full-speed USB device number 5 using xhci_hcd
[ 167.903455] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[ 167.910793] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
[ 167.946771] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
[ 168.163211] usb 1-9: reset full-speed USB device number 8 using xhci_hcd
[ 168.422910] usb 1-8: reset high-speed USB device number 7 using xhci_hcd
[ 168.830965] usb 1-4.2: reset low-speed USB device number 6 using xhci_hcd
[ 169.387447] usb 1-4.1: reset low-speed USB device number 4 using xhci_hcd
[ 169.720828] PM: restore of devices complete after 2684.862 msecs
[ 169.721308] usb 1-7:1.0: rebind failed: -517
[ 169.721313] usb 1-7:1.1: rebind failed: -517
[ 169.721665] PM: Image restored successfully.
[ 169.721774] PM: Basic memory bitmaps freed
[ 169.721780] Restarting tasks ... done.
[ 169.731277] thermal thermal_zone2: failed to read out thermal zone (-5)
[ 169.739769] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[ 169.746776] Bluetooth: hci0: Device revision is 5
[ 169.746777] Bluetooth: hci0: Secure boot is enabled
[ 169.746778] Bluetooth: hci0: OTP lock is enabled
[ 169.746779] Bluetooth: hci0: API lock is enabled
[ 169.746779] Bluetooth: hci0: Debug lock is disabled
[ 169.746780] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 169.751150] bluetooth hci0: firmware: direct-loading firmware intel/ibt-11-5.sfi
[ 169.751153] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[ 169.865935] e1000e: eth1 NIC Link is Down
[ 169.867438] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 170.075048] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 170.075720] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 170.079558] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 170.082036] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 170.212136] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 170.212626] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 170.309080] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 170.321546] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 170.323628] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 170.458950] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 170.459265] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 170.491370] [drm] RC6 on
[ 170.553392] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 170.603365] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 170.629381] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 170.825772] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input23
[ 171.338681] Bluetooth: hci0: Waiting for firmware download to complete
[ 171.338772] Bluetooth: hci0: Firmware loaded in 1562047 usecs
[ 171.338958] Bluetooth: hci0: Waiting for device to boot
[ 171.349737] Bluetooth: hci0: Device booted in 10636 usecs
[ 171.349930] bluetooth hci0: firmware: direct-loading firmware intel/ibt-11-5.ddc
[ 171.349932] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[ 171.353746] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 174.173465] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 182.459087] [drm] GPU HANG: ecode 9:0:0x81ba3c75, in Xorg [709], reason: Hang on render ring, action: reset
[ 182.459089] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
[ 182.459090] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
[ 182.459091] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
[ 182.459092] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
[ 182.459094] [drm] GPU crash dump saved to /sys/class/drm/card0/error
[ 182.459149] drm/i915: Resetting chip after gpu hang
[ 182.459205] [drm] RC6 on
[ 182.472931] [drm] GuC firmware load skipped
[ 194.470785] drm/i915: Resetting chip after gpu hang
[ 194.470870] [drm] RC6 on
[ 194.486847] [drm] GuC firmware load skipped
[ 204.410003] drm/i915: Resetting chip after gpu hang
[ 204.410066] [drm] RC6 on
[ 204.426139] [drm] GuC firmware load skipped
[ 216.409463] drm/i915: Resetting chip after gpu hang
[ 216.409523] [drm] RC6 on
[ 216.423597] [drm] GuC firmware load skipped
[ 227.480999] drm/i915: Resetting chip after gpu hang
[ 227.481063] [drm] RC6 on
[ 227.497475] [drm] GuC firmware load skipped
[ 237.464539] drm/i915: Resetting chip after gpu hang
[ 237.464597] [drm] RC6 on
[ 237.479871] [drm] GuC firmware load skipped
[ 237.535689] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 237.552167] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 258.143867] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 266.693209] wlp3s0: authenticate with 58:8b:f3:84:5c:0b
[ 266.701978] wlp3s0: send auth to 58:8b:f3:84:5c:0b (try 1/3)
[ 266.709585] wlp3s0: authenticated
[ 266.711040] wlp3s0: associate with 58:8b:f3:84:5c:0b (try 1/3)
[ 266.715945] wlp3s0: RX AssocResp from 58:8b:f3:84:5c:0b (capab=0x411 status=0 aid=2)
[ 266.718935] wlp3s0: associated
[ 266.719028] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 1282.931210] wlp3s0: deauthenticating from 58:8b:f3:84:5c:0b by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1282.965776] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1290.231993] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1290.234425] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1290.250263] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1297.080722] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1303.251580] wlp3s0: authenticate with 58:8b:f3:84:5c:0b
[ 1303.259406] wlp3s0: send auth to 58:8b:f3:84:5c:0b (try 1/3)
[ 1303.262357] wlp3s0: authenticated
[ 1303.265237] wlp3s0: associate with 58:8b:f3:84:5c:0b (try 1/3)
[ 1303.270025] wlp3s0: RX AssocResp from 58:8b:f3:84:5c:0b (capab=0x411 status=0 aid=2)
[ 1303.272353] wlp3s0: associated
[ 1303.272398] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
** Model information
sys_vendor: LENOVO
product_name: 20FXS05500
product_version: ThinkPad T460p
chassis_vendor: LENOVO
chassis_version: None
bios_vendor: LENOVO
bios_version: R07ET52W (0.52 )
board_vendor: LENOVO
board_name: 20FXS05500
board_version: NO DPK
** Loaded modules:
nvidia_uvm(PO)
nvidia(PO)
ctr
ccm
rfcomm
bbswitch(O)
cmac
bnep
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_codec_generic
binfmt_misc
fuse
intel_rapl
arc4
x86_pkg_temp_thermal
intel_powerclamp
coretemp
iwlmvm
mac80211
kvm
irqbypass
crct10dif_pclmul
crc32_pclmul
ghash_clmulni_intel
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
i915
iwlwifi
intel_cstate
btusb
videobuf2_core
btrtl
intel_uncore
btbcm
videodev
btintel
snd_hda_intel
media
bluetooth
intel_rapl_perf
rtsx_pci_ms
snd_hda_codec
cfg80211
drm_kms_helper
memstick
snd_hda_core
pcspkr
drm
snd_hwdep
sg
iTCO_wdt
evdev
joydev
iTCO_vendor_support
snd_pcm
mei_me
i2c_algo_bit
mei
serio_raw
snd_timer
shpchp
wmi
thinkpad_acpi
nvram
snd
soundcore
rfkill
ac
battery
video
button
parport_pc
ppdev
sunrpc
lp
parport
ip_tables
x_tables
autofs4
ext4
crc16
jbd2
crc32c_generic
fscrypto
ecb
mbcache
hid_generic
usbhid
hid
sd_mod
rtsx_pci_sdmmc
mmc_core
crc32c_intel
aesni_intel
aes_x86_64
glue_helper
lrw
gf128mul
ablk_helper
cryptd
psmouse
e1000e
ahci
i2c_i801
ptp
libahci
pps_core
xhci_pci
i2c_smbus
xhci_hcd
libata
rtsx_pci
mfd_core
usbcore
scsi_mod
usb_common
thermal
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Skylake Host Bridge/DRAM Registers [8086:1910] (rev 07)
Subsystem: Lenovo Skylake Host Bridge/DRAM Registers [17aa:5050]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: skl_uncore
00:01.0 PCI bridge [0604]: Intel Corporation Skylake PCIe Controller (x16) [8086:1901] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 120
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:01.2 PCI bridge [0604]: Intel Corporation Skylake PCIe Controller (x4) [8086:1909] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 121
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f1000000-f1ffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 530 [8086:191b] (rev 06) (prog-if 00 [VGA controller])
Subsystem: Lenovo HD Graphics 530 [17aa:5050]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 128
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at e000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller [8086:a12f] (rev 31) (prog-if 30 [XHCI])
Subsystem: Lenovo Sunrise Point-H USB 3.0 xHCI Controller [17aa:5050]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 123
Region 0: Memory at f2220000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-H Thermal subsystem [8086:a131] (rev 31)
Subsystem: Lenovo Sunrise Point-H Thermal subsystem [17aa:5050]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 0: Memory at f224a000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-H CSME HECI #1 [8086:a13a] (rev 31)
Subsystem: Lenovo Sunrise Point-H CSME HECI [17aa:5050]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 125
Region 0: Memory at f224b000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-H SATA Controller [AHCI mode] [8086:a103] (rev 31) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Sunrise Point-H SATA Controller [AHCI mode] [17aa:5050]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 124
Region 0: Memory at f2248000 (32-bit, non-prefetchable) [size=8K]
Region 1: Memory at f224e000 (32-bit, non-prefetchable) [size=256]
Region 2: I/O ports at e080 [size=8]
Region 3: I/O ports at e088 [size=4]
Region 4: I/O ports at e060 [size=32]
Region 5: Memory at f224c000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #1 [8086:a110] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f2100000-f21fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #5 [8086:a114] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: f2000000-f20fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-H LPC Controller [8086:a14d] (rev 31)
Subsystem: Lenovo Sunrise Point-H LPC Controller [17aa:5050]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-H PMC [8086:a121] (rev 31)
Subsystem: Lenovo Sunrise Point-H PMC [17aa:5050]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f2244000 (32-bit, non-prefetchable) [size=16K]
00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-H HD Audio [8086:a170] (rev 31)
Subsystem: Lenovo Sunrise Point-H HD Audio [17aa:5050]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 126
Region 0: Memory at f2240000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at f2230000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-H SMBus [8086:a123] (rev 31)
Subsystem: Lenovo Sunrise Point-H SMBus [17aa:5050]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f224d000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (2) I219-LM [8086:15b7] (rev 31)
Subsystem: Lenovo Ethernet Connection (2) I219-LM [17aa:5050]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 129
Region 0: Memory at f2200000 (32-bit, non-prefetchable) [size=128K]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
02:00.0 3D controller [0302]: NVIDIA Corporation GM108M [GeForce 940MX] [10de:134d] (rev a2)
Subsystem: Lenovo GM108M [GeForce 940MX] [17aa:5050]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f1000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at d000 [size=128]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia
03:00.0 Network controller [0280]: Intel Corporation Wireless 8260 [8086:24f3] (rev 3a)
Subsystem: Intel Corporation Wireless 8260 [8086:1130]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 127
Region 0: Memory at f2100000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS522A PCI Express Card Reader [10ec:522a] (rev 01)
Subsystem: Lenovo RTS522A PCI Express Card Reader [17aa:5050]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 122
Region 0: Memory at f2000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 008: ID 058f:9540 Alcor Micro Corp. AU9540 Smartcard Reader
Bus 001 Device 007: ID 04f2:b541 Chicony Electronics Co., Ltd
Bus 001 Device 005: ID 8087:0a2b Intel Corp.
Bus 001 Device 003: ID 138a:0090 Validity Sensors, Inc.
Bus 001 Device 006: ID 046d:c050 Logitech, Inc. RX 250 Optical Mouse
Bus 001 Device 004: ID 046a:0180 Cherry GmbH
Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 9.3
APT prefers stable
APT policy: (1000, 'stable'), (900, 'stable'), (500, 'stable-updates'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 4.9.0-4-amd64 (SMP w/8 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.9.0-4-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.130
ii kmod 23-2
ii linux-base 4.5
Versions of packages linux-image-4.9.0-4-amd64 recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.1.0-2.3
Versions of packages linux-image-4.9.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta3-5
pn linux-doc-4.9 <none>
Versions of packages linux-image-4.9.0-4-amd64 is related to:
ii firmware-amd-graphics 20161130-3
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 20161130-3
pn firmware-libertas <none>
ii firmware-linux-nonfree 20161130-3
ii firmware-misc-nonfree 20161130-3
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: