Bug#849051: linux-image-4.8.0-2-amd64: Random segfaults with Radeon HD 4250
Package: src:linux
Version: 4.8.11-1
Severity: grave
Justification: causes non-serious data loss
Dear Maintainer,
The recent kernel update causes segfaults and system hanging when using
graphical mode. Segfaults randomly occur to graphical apps, always occur
to apps using hardware acceleration (e.g. chromium), occur under various
DE (tried KDE, Fluxbox). Segfaults never occur in text terminal mode.
However, when I boot into 4.8.0-1 or earlier versions, the system works
flawlessly, including hardware acceleration.
I'll be glad to provide any additional information. Thanks.
-- Package-specific info:
** Version:
Linux version 4.8.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.1 20161019 (Debian 5.4.1-3) ) #1 SMP Debian 4.8.11-1 (2016-12-02)
** Command line:
BOOT_IMAGE=/vmlinuz-4.8.0-2-amd64 root=UUID=7d081ac6-a56b-49a4-8afc-658cb48fc974 ro single resume=/dev/mapper/wd-swap
** Tainted: OE (12288)
* Out-of-tree module has been loaded.
* Unsigned module has been loaded.
** Kernel log:
[ 6.865521] it87: Beeping is supported
[ 6.871580] Loading iSCSI transport class v2.0-870.
[ 6.880628] iscsi: registered transport (tcp)
[ 6.912687] iscsi: registered transport (iser)
[ 7.010766] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 7.012362] ACPI: Power Button [PWRB]
[ 7.014189] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 7.016262] ACPI: Power Button [PWRF]
[ 7.020242] acpi_cpufreq: overriding BIOS provided _PSD data
[ 7.027987] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.039831] wmi: Mapper loaded
[ 7.063462] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.065638] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 7.067853] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 7.070203] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 7.072827] sd 6:0:0:1: Attached scsi generic sg4 type 0
[ 7.075388] sd 6:0:0:2: Attached scsi generic sg5 type 0
[ 7.080628] sd 6:0:0:3: Attached scsi generic sg6 type 0
[ 7.083422] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 7.085055] sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x42
[ 7.085488] sd 7:0:0:0: Attached scsi generic sg7 type 0
[ 7.085571] sd 7:0:0:1: Attached scsi generic sg8 type 0
[ 7.085696] sd 7:0:0:2: Attached scsi generic sg9 type 0
[ 7.085946] sd 7:0:0:3: Attached scsi generic sg10 type 0
[ 7.094338] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 7.095738] sp5100_tco: Last reboot was not triggered by watchdog.
[ 7.098515] sp5100_tco: initialized (0xffffa90f80e6cb00). heartbeat=60 sec (nowayout=0)
[ 7.124534] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input6
[ 7.128612] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC889: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 7.130123] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.131644] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 7.133145] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 7.134637] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
[ 7.136125] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 7.141568] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 7.143094] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 7.144545] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 7.158656] random: crng init done
[ 7.168801] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 7.170315] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 7.171784] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 7.173249] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 7.174874] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 7.176365] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 7.177856] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 7.179407] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 7.199100] kvm: Nested Virtualization enabled
[ 7.200849] kvm: Nested Paging enabled
[ 7.340670] media: Linux media interface: v0.10
[ 7.349591] Linux video capture interface: v2.00
[ 7.364772] uvcvideo: Found UVC 1.00 device <unnamed> (046d:081a)
[ 7.384328] uvcvideo 3-1:1.0: Entity type for entity Extension 4 was not initialized!
[ 7.386372] uvcvideo 3-1:1.0: Entity type for entity Extension 6 was not initialized!
[ 7.388353] uvcvideo 3-1:1.0: Entity type for entity Extension 7 was not initialized!
[ 7.390327] uvcvideo 3-1:1.0: Entity type for entity Processing 2 was not initialized!
[ 7.391761] uvcvideo 3-1:1.0: Entity type for entity Extension 3 was not initialized!
[ 7.393191] uvcvideo 3-1:1.0: Entity type for entity Camera 1 was not initialized!
[ 7.394721] input: UVC Camera (046d:081a) as /devices/pci0000:00/0000:00:13.2/usb3/3-1/3-1:1.0/input/input15
[ 7.396277] usbcore: registered new interface driver uvcvideo
[ 7.397742] USB Video Class driver (1.1.1)
[ 7.639363] ath: EEPROM regdomain: 0x809c
[ 7.639375] ath: EEPROM indicates we should expect a country code
[ 7.639378] ath: doing EEPROM country->regdmn map search
[ 7.639380] ath: country maps to regdmn code: 0x52
[ 7.639382] ath: Country alpha2 being used: CN
[ 7.639392] ath: Regpair used: 0x52
[ 7.657264] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 7.657580] ieee80211 phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81 mem=0xffffa90f81000000, irq=20
[ 7.742237] Adding 8388604k swap on /dev/mapper/wd-swap. Priority:-1 extents:1 across:8388604k FS
[ 7.774859] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 8.136273] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 8.145468] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: acl
[ 8.188901] systemd-journald[321]: Received request to flush runtime journal from PID 1
[ 8.303661] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 8.559437] usb 3-1: Warning! Unlikely big volume range (=6144), cval->res is probably wrong.
[ 8.565469] usb 3-1: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1
[ 8.572190] usbcore: registered new interface driver snd-usb-audio
[ 14.482629] vboxdrv: loading out-of-tree module taints kernel.
[ 14.484803] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 14.490737] vboxdrv: Found 4 processor cores
[ 14.510936] vboxdrv: TSC mode is Invariant, tentative frequency 2611552861 Hz
[ 14.512756] vboxdrv: Successfully loaded version 5.1.12_Debian (interface 0x00280000)
[ 14.520044] VBoxNetFlt: Successfully started.
[ 14.531622] VBoxNetAdp: Successfully started.
[ 14.541558] VBoxPciLinuxInit
[ 14.547048] vboxpci: IOMMU not found (not registered)
[ 15.152607] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.272925] r8169 0000:04:00.0 eth0: link down
[ 15.272953] r8169 0000:04:00.0 eth0: link down
[ 15.272999] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.278443] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.888442] r8169 0000:04:00.0 eth0: link up
[ 17.888486] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.967788] systemd[1]: apt-daily.timer: Adding 10h 6.118413s random time.
[ 21.619454] usb 3-1: reset high-speed USB device number 2 using ehci-pci
[ 43.612113] kactivitymanage[1640]: segfault at 7f66492d1cb0 ip 00007f663802f701 sp 00007ffc15ec7e88 error 4 in libQt5Sql.so.5.7.1[7f6638019000+45000]
[ 43.876541] akonadi_migrati[1819]: segfault at 8 ip 00007efcf2b729a1 sp 00007fff302dc880 error 4 in libQt5XcbQpa.so.5.7.1[7efcf2b38000+fa000]
[ 43.927485] akonadi_newmail[1822]: segfault at 8 ip 00007f912ad9e9a1 sp 00007ffd8d64fec0 error 4 in libQt5XcbQpa.so.5.7.1[7f912ad64000+fa000]
[ 43.946432] akonadi_maildir[1814]: segfault at 8 ip 00007fac6cc319a1 sp 00007ffd45f88100 error 4 in libQt5XcbQpa.so.5.7.1[7fac6cbf7000+fa000]
[ 44.019610] akonadi_maildis[1815]: segfault at 8 ip 00007fdbf80219a1 sp 00007fff2f0177f0 error 4 in libQt5XcbQpa.so.5.7.1[7fdbf7fe7000+fa000]
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: GA-880GMA-USB3
product_version:
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version:
bios_vendor: Award Software International, Inc.
bios_version: F4c
board_vendor: Gigabyte Technology Co., Ltd.
board_name: GA-880GMA-USB3
board_version:
** Loaded modules:
pci_stub
vboxpci(OE)
vboxnetadp(OE)
vboxnetflt(OE)
binfmt_misc
vboxdrv(OE)
arc4
snd_usb_audio
snd_usbmidi_lib
uvcvideo
snd_rawmidi
snd_seq_device
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
videobuf2_core
videodev
media
joydev
evdev
ath9k
ath9k_common
ath9k_hw
kvm_amd
ath
mac80211
kvm
cfg80211
irqbypass
snd_hda_codec_realtek
snd_hda_codec_hdmi
snd_hda_codec_generic
rfkill
serio_raw
k10temp
snd_hda_intel
snd_hda_codec
snd_hda_core
snd_hwdep
sp5100_tco
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_timer
sg
snd
soundcore
wmi
shpchp
acpi_cpufreq
tpm_tis
tpm_tis_core
button
tpm
ib_iser
rdma_cm
iw_cm
ib_cm
ib_core
configfs
iscsi_tcp
libiscsi_tcp
libiscsi
scsi_transport_iscsi
it87
hwmon_vid
parport_pc
ppdev
lp
parport
loop
dm_crypt
ip_tables
x_tables
autofs4
ext4
crc16
jbd2
crc32c_generic
uas
usb_storage
fscrypto
ecb
glue_helper
lrw
gf128mul
ablk_helper
cryptd
aes_x86_64
mbcache
hid_microsoft
hid_generic
usbhid
hid
dm_mod
sr_mod
cdrom
sd_mod
ohci_pci
radeon
i2c_piix4
ahci
libahci
r8169
mii
libata
xhci_pci
scsi_mod
xhci_hcd
i2c_algo_bit
drm_kms_helper
ohci_hcd
ehci_pci
ttm
ehci_hcd
drm
usbcore
usb_common
floppy
fjes
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] RS880 Host Bridge [1022:9601]
Subsystem: Advanced Micro Devices, Inc. [AMD] RS880 Host Bridge [1022:9601]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32
NUMA node: 0
Region 3: Memory at <ignored> (64-bit, non-prefetchable)
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 99
NUMA node: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fd300000-fd4fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) [1022:9604] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 24
NUMA node: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fd200000-fd2fffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:09.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 4) [1022:9608] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 25
NUMA node: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:0a.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 5) [1022:9609] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 26
NUMA node: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1458:b002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 19
NUMA node: 0
Region 0: I/O ports at ff00 [size=8]
Region 1: I/O ports at fe00 [size=4]
Region 2: I/O ports at fd00 [size=8]
Region 3: I/O ports at fc00 [size=4]
Region 4: I/O ports at fb00 [size=16]
Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 18
NUMA node: 0
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB EHCI Controller [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin B routed to IRQ 17
NUMA node: 0
Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 18
NUMA node: 0
Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB EHCI Controller [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin B routed to IRQ 17
NUMA node: 0
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 42)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Kernel modules: i2c_piix4, sp5100_tco
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
Subsystem: Gigabyte Technology Co., Ltd SBx00 Azalia (Intel HDA) [1458:a102]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at fe024000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
NUMA node: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
NUMA node: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=64
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fdb00000-fdbfffff
Prefetchable memory behind bridge: fda00000-fdafffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin C routed to IRQ 18
NUMA node: 0
Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:15.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) [1002:43a0] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 17
NUMA node: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fd800000-fd8fffff
Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:15.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) [1002:43a1] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 17
NUMA node: 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: fd600000-fd6fffff
Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 18
NUMA node: 0
Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB EHCI Controller [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin B routed to IRQ 17
NUMA node: 0
Region 0: Memory at fe028000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
Kernel driver in use: k10temp
Kernel modules: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
01:05.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RS880 [Radeon HD 4250] [1002:9715] (prog-if 00 [VGA controller])
Subsystem: Gigabyte Technology Co., Ltd RS880 [Radeon HD 4250] [1458:d000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 18
NUMA node: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at be00 [size=256]
Region 2: Memory at fd4e0000 (32-bit, non-prefetchable) [size=64K]
Region 5: Memory at fd300000 (32-bit, non-prefetchable) [size=1M]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeon
01:05.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] RS880 HDMI Audio [Radeon HD 4200 Series] [1002:970f]
Subsystem: Gigabyte Technology Co., Ltd RS880 HDMI Audio [Radeon HD 4200 Series] [1458:960f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin B routed to IRQ 19
NUMA node: 0
Region 0: Memory at fd4fc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
02:00.0 USB controller [0c03]: MosChip Semiconductor Technology Ltd. MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at fd2ff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
02:00.1 USB controller [0c03]: MosChip Semiconductor Technology Ltd. MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at fd2fe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
02:00.2 USB controller [0c03]: MosChip Semiconductor Technology Ltd. MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin B routed to IRQ 17
NUMA node: 0
Region 0: Memory at fd2fd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
02:00.3 USB controller [0c03]: MosChip Semiconductor Technology Ltd. MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin B routed to IRQ 17
NUMA node: 0
Region 0: Memory at fd2fc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
02:00.4 USB controller [0c03]: MosChip Semiconductor Technology Ltd. MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin C routed to IRQ 18
NUMA node: 0
Region 0: Memory at fd2fb000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
02:00.5 USB controller [0c03]: MosChip Semiconductor Technology Ltd. MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin C routed to IRQ 18
NUMA node: 0
Region 0: Memory at fd2fa000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
02:00.6 USB controller [0c03]: MosChip Semiconductor Technology Ltd. MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin D routed to IRQ 19
NUMA node: 0
Region 0: Memory at fd2f9000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
02:00.7 USB controller [0c03]: MosChip Semiconductor Technology Ltd. MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin D routed to IRQ 19
NUMA node: 0
Region 0: Memory at fd2f8000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
03:00.0 USB controller [0c03]: Etron Technology, Inc. EJ168 USB 3.0 Host Controller [1b6f:7023] (rev 01) (prog-if 30 [XHCI])
Subsystem: Gigabyte Technology Co., Ltd EJ168 USB 3.0 Host Controller [1458:5007]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 27
NUMA node: 0
Region 0: Memory at fdef8000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
Subsystem: Gigabyte Technology Co., Ltd Onboard Ethernet [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 28
NUMA node: 0
Region 0: I/O ports at ce00 [size=256]
Region 2: Memory at fd9ff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fd9f8000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
05:06.0 Network controller [0280]: Qualcomm Atheros AR5416 Wireless Network Adapter [AR5008 802.11(a)bgn] [168c:0023] (rev 01)
Subsystem: Qualcomm Atheros AR5416 Wireless Network Adapter [AR5008 802.11(a)bgn] [168c:3071]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 20
NUMA node: 0
Region 0: Memory at fdbf0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
Kernel modules: ath9k
** USB devices:
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 013 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 012 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 005: ID 0bda:0151 Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader)
Bus 003 Device 004: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 003 Device 003: ID 0bda:0151 Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader)
Bus 003 Device 002: ID 046d:081a Logitech, Inc.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 010 Device 003: ID 047d:1020 Kensington Expert Mouse Trackball
Bus 010 Device 002: ID 045e:00db Microsoft Corp. Natural Ergonomic Keyboard 4000 V1.0
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 017 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 016 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 015 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 014 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.8.0-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.8.0-2-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.126
ii kmod 23-1
ii linux-base 4.5
Versions of packages linux-image-4.8.0-2-amd64 recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.1.0-2
Versions of packages linux-image-4.8.0-2-amd64 suggests:
ii debian-kernel-handbook 1.0.17
ii extlinux 3:6.03+dfsg-14
ii grub-pc 2.02~beta3-3
pn linux-doc-4.8 <none>
Versions of packages linux-image-4.8.0-2-amd64 is related to:
ii firmware-amd-graphics 20161130-2
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20161130-2
ii firmware-misc-nonfree 20161130-2
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20161130-2
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: