[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#632187: marked as done (linux-image-2.6.32-5-amd64: kernel hangs for 120 seconds while booting)



Your message dated Tue, 09 Feb 2016 15:25:42 +0000
with message-id <E1aTAAg-0004hm-MB@deadeye>
and subject line Closing bugs assigned to linux-2.6 package
has caused the Debian Bug report #632187,
regarding linux-image-2.6.32-5-amd64: kernel hangs for 120 seconds while booting
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
632187: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=632187
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-35
Severity: important

the kernel hangs while booting for 120 and has this error in the kernel-log


-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-35) (dannf@debian.org) (gcc
version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue Jun 14 09:42:28 UTC 2011

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64
root=UUID=027d2b15-ed0b-4609-b1b4-da974ef9bdf0 ro rootdelay=9

** Not tainted

** Kernel log:
[  360.749487]  0000000000015780 0000000000015780 ffff88013cbbcdb0
ffff88013cbbd0a8
[  360.749706] Call Trace:
[  360.749769]  [<ffffffff812fbab6>] ? mutex_lock+0xd/0x31
[  360.749831]  [<ffffffff810a8a0f>] ? trace_module_notify+0x46e/0x47f
[  360.749894]  [<ffffffffa00aa000>] ? wait_scan_init+0x0/0xd
[scsi_wait_scan]
[  360.749957]  [<ffffffff8122133d>] ? wait_for_device_probe+0x64/0x83
[  360.750017]  [<ffffffff81064f1a>] ? autoremove_wake_function+0x0/0x2e
[  360.750078]  [<ffffffff810689cd>] ?
__blocking_notifier_call_chain+0x51/0x5f
[  360.750140]  [<ffffffffa00aa009>] ? wait_scan_init+0x9/0xd
[scsi_wait_scan]
[  360.750201]  [<ffffffff8100a065>] ? do_one_initcall+0x64/0x174
[  360.750261]  [<ffffffff8107a9cc>] ? sys_init_module+0xc5/0x21a
[  360.750320]  [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b
[  480.748022] INFO: task modprobe:267 blocked for more than 120 seconds.
[  480.748084] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[  480.748157] modprobe      D ffff88013cbbd4c0     0   267     77
0x00000000
[  480.748291]  ffff88013cbbd4c0 0000000000000086 0000000000000000
ffff88013ca0cd80
[  480.748510]  ffffc90000623bc0 0000001000000000 000000000000f9e0
ffff88013c2d3fd8
[  480.748730]  0000000000015780 0000000000015780 ffff88013cbbcdb0
ffff88013cbbd0a8
[  480.748960] Call Trace:
[  480.749019]  [<ffffffff812fbab6>] ? mutex_lock+0xd/0x31
[  480.749079]  [<ffffffff810a8a0f>] ? trace_module_notify+0x46e/0x47f
[  480.749141]  [<ffffffffa00aa000>] ? wait_scan_init+0x0/0xd
[scsi_wait_scan]
[  480.749203]  [<ffffffff8122133d>] ? wait_for_device_probe+0x64/0x83
[  480.749262]  [<ffffffff81064f1a>] ? autoremove_wake_function+0x0/0x2e
[  480.749322]  [<ffffffff810689cd>] ?
__blocking_notifier_call_chain+0x51/0x5f
[  480.749384]  [<ffffffffa00aa009>] ? wait_scan_init+0x9/0xd
[scsi_wait_scan]
[  480.749444]  [<ffffffff8100a065>] ? do_one_initcall+0x64/0x174
[  480.749503]  [<ffffffff8107a9cc>] ? sys_init_module+0xc5/0x21a
[  480.749562]  [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b
[  547.148010] megaraid: sync cmd failed
[  555.148009] megaraid: blocked mailbox
[  555.148067] megaraid: Inquiry3 failed
[  555.148220] megaraid: maibox adapter did not initialize
[  555.148290] megaraid 0000:05:00.0: PCI INT A disabled
[  564.187021] PM: Starting manual resume from disk
[  564.187095] PM: Resume from partition 8:2
[  564.187097] PM: Checking hibernation image.
[  564.187261] PM: Error -22 checking image file
[  564.187265] PM: Resume from disk failed.
[  564.196441] PM: Marking nosave pages: 00000000000a0000 - 0000000000100000
[  564.196450] PM: Marking nosave pages: 00000000bffc0000 - 0000000100000000
[  564.198165] PM: Basic memory bitmaps created
[  564.226877] PM: Basic memory bitmaps freed
[  564.264248] kjournald starting.  Commit interval 5 seconds
[  564.264261] EXT3-fs: mounted filesystem with ordered data mode.
[  566.832989] udev[379]: starting version 164
[  567.389886] processor LNXCPU:00: registered as cooling_device0
[  567.390085] processor LNXCPU:01: registered as cooling_device1
[  567.390250] processor LNXCPU:02: registered as cooling_device2
[  567.390405] processor LNXCPU:03: registered as cooling_device3
[  567.391876] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[  567.391990] ACPI: Power Button [PWRF]
[  567.394532] input: PC Speaker as /devices/platform/pcspkr/input/input3
[  567.444663] EDAC MC: Ver: 2.1.0 Jun 14 2011
[  567.453869] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD
(20090903/video-1882)
[  567.454274] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:11/LNXVIDEO:00/input/input4
[  567.454516] ACPI: Video Device [EVGA] (multi-head: no  rom: yes 
post: no)
[  567.455925] dcdbas dcdbas: Dell Systems Management Base Driver
(version 5.6.0-3.2)
[  567.480922] Contact your BIOS vendor to see if the E752x error
registers can be safely un-hidden
[  567.558398] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  567.574547] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  567.602261] udev[401]: renamed network interface eth2 to eth2-eth1
[  567.605980] udev[394]: renamed network interface eth1 to eth2
[  567.653274] udev[401]: renamed network interface eth2-eth1 to eth1
[  567.817573] intel_rng: FWH not detected
[  567.831707] intel_rng: FWH not detected
[  567.930302] [drm] Initialized drm 1.1.0 20060810
[  568.011535] st0: Block limits 1 - 16777215 bytes.
[  568.116419] [drm] radeon defaulting to userspace modesetting.
[  568.116873] pci 0000:12:0d.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[  568.117174] [drm] Initialized radeon 1.32.0 20080528 for 0000:12:0d.0
on minor 0
[  568.215972] Error: Driver 'pcspkr' is already registered, aborting...
[  568.241078] Error: Driver 'pcspkr' is already registered, aborting...
[  568.444110] input: ImPS/2 Generic Wheel Mouse as
/devices/platform/i8042/serio1/input/input5
[  570.259725] Adding 9767512k swap on /dev/sda2.  Priority:-1 extents:1
across:9767512k
[  570.392779] EXT3 FS on sda3, internal journal
[  570.595110] loop: module loaded
[  570.637640] ipmi message handler version 39.2
[  570.641541] IPMI System Interface driver.
[  570.641612] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o
address 0xca8, slave address 0x20, irq 0
[  571.239971] ipmi: Found new BMC (man_id: 0x0002a2,  prod_id: 0x0000,
dev_id: 0x20)
[  571.240079] IPMI kcs interface initialized
[  571.255583] ipmi device interface
[  573.157941] fuse init (API version 7.13)
[  573.250741] kjournald starting.  Commit interval 5 seconds
[  573.250865] EXT3 FS on sda1, internal journal
[  573.250968] EXT3-fs: mounted filesystem with ordered data mode.
[  573.265065] kjournald starting.  Commit interval 5 seconds
[  573.265287] EXT3 FS on sdb2, internal journal
[  573.265390] EXT3-fs: mounted filesystem with ordered data mode.
[  573.275617] kjournald starting.  Commit interval 5 seconds
[  573.275724] EXT3 FS on sdb1, internal journal
[  573.275826] EXT3-fs: mounted filesystem with ordered data mode.
[  573.286228] kjournald starting.  Commit interval 5 seconds
[  573.286452] EXT3 FS on sdb3, internal journal
[  573.286554] EXT3-fs: mounted filesystem with ordered data mode.
[  575.179958] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  575.180298] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: RX/TX
[  575.181018] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  585.956274] eth0: no IPv6 routers present

** Model information
sys_vendor: Dell Computer Corporation
product_name: PowerEdge 2800
product_version:
chassis_vendor: Dell Computer Corporation
chassis_version:
bios_vendor: Dell Computer Corporation
bios_version: A06
board_vendor: Dell Computer Corporation
board_name: 0T7916
board_version: A02

** Loaded modules:
Module                  Size  Used by
binfmt_misc             6431  1
fuse                   50892  1
ipmi_devintf            6587  0
ipmi_si                30960  0
ipmi_msghandler        26634  2 ipmi_devintf,ipmi_si
loop                   11799  0
snd_pcm_oss            32591  0
snd_mixer_oss          12606  1 snd_pcm_oss
radeon                574844  0
ttm                    40146  1 radeon
drm_kms_helper         20369  1 radeon
snd_pcm                60503  1 snd_pcm_oss
drm                   142327  3 radeon,ttm,drm_kms_helper
i2c_algo_bit            4225  1 radeon
i2c_core               15819  4 radeon,drm_kms_helper,drm,i2c_algo_bit
rng_core                3006  0
snd_timer              15582  1 snd_pcm
psmouse                49937  0
snd                    46526  4 snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
shpchp                 26264  0
soundcore               4598  1 snd
pci_hotplug            21203  1 shpchp
snd_page_alloc          6249  1 snd_pcm
e752x_edac              9393  0
dcdbas                  5048  0
video                  17445  0
evdev                   7352  6
edac_core              29261  1 e752x_edac
output                  1692  1 video
pcspkr                  1699  0
serio_raw               3752  0
button                  4650  0
processor              29935  0
ext3                  106630  5
jbd                    37085  1 ext3
mbcache                 5050  1 ext3
sd_mod                 29921  8
crc_t10dif              1276  1 sd_mod
osst                   45317  0
st                     30916  0
ch                      9992  0
sg                     24069  0
sr_mod                 12602  0
cdrom                  29415  1 sr_mod
ata_generic             3239  0
uhci_hcd               18521  0
ata_piix               21124  0
libata                133760  2 ata_generic,ata_piix
qla1280                19065  0
aic7xxx               107123  1
floppy                 49087  0
scsi_transport_spi     18774  1 aic7xxx
thermal                11674  0
i2o_core               30751  0
megaraid_mbox          23160  6
e1000                  85517  0
ehci_hcd               32081  0
usbcore               122498  3 uhci_hcd,ehci_hcd
nls_base                6377  1 usbcore
scsi_mod              126517  11
sd_mod,osst,st,ch,sg,sr_mod,libata,qla1280,aic7xxx,scsi_transport_spi,megaraid_mbox
megaraid_mm             6449  1 megaraid_mbox
thermal_sys            11942  3 video,processor,thermal

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation E7520 Memory Controller
Hub [8086:3590] (rev 09)
        Subsystem: Dell Device [1028:016e]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: [40] Vendor Specific Information: Len=05 <?>

00:02.0 PCI bridge [0604]: Intel Corporation E7525/E7520/E7320 PCI
Express Port A [8086:3595] (rev 09) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=01, subordinate=05, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: fe400000-feafffff
        Prefetchable memory behind bridge: 00000000c8000000-00000000d7ffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] MSI: Enable+ Count=1/2 Maskable- 64bit-
                Address: fee0f00c  Data: 4151
        Capabilities: [64] Express (v1) Root Port (Slot-), MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- RBE- FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 256 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
                LnkCap: Port #2, Speed 2.5GT/s, Width x4, ASPM L0s,
Latency L0 <4us, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal+
PMEIntEna+ CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap-
ChkEn-
        Kernel driver in use: pcieport

00:03.0 PCI bridge [0604]: Intel Corporation E7525/E7520/E7320 PCI
Express Port A1 [8086:3596] (rev 09) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=06, subordinate=08, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: fdf00000-fe3fffff
        Prefetchable memory behind bridge: 00000000da000000-00000000da0fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] MSI: Enable+ Count=1/2 Maskable- 64bit-
                Address: fee0f00c  Data: 4159
        Capabilities: [64] Express (v1) Root Port (Slot-), MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- RBE- FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 256 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
                LnkCap: Port #3, Speed 2.5GT/s, Width x4, ASPM L0s,
Latency L0 <4us, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal+
PMEIntEna+ CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap-
ChkEn-
        Kernel driver in use: pcieport

00:04.0 PCI bridge [0604]: Intel Corporation E7525/E7520 PCI Express
Port B [8086:3597] (rev 09) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=09, subordinate=0b, sec-latency=0
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: fde00000-fdefffff
        Prefetchable memory behind bridge: 00000000d9000000-00000000d9ffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] MSI: Enable+ Count=1/2 Maskable- 64bit-
                Address: fee0f00c  Data: 4161
        Capabilities: [64] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- RBE- FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq- AuxPwr-
TransPend-
                LnkCap: Port #4, Speed 2.5GT/s, Width x4, ASPM L0s,
Latency L0 <4us, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+
Surprise-
                        Slot #6, PowerLimit 25.000W; Interlock- NoCompl-
                SltCtl: Enable: AttnBtn+ PwrFlt+ MRL- PresDet+ CmdCplt-
HPIrq+ LinkChg-
                        Control: AttnInd Off, PwrInd Off, Power+ Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL+ CmdCplt+
PresDet- Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna+ CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO+ CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                AERCap: First Error Pointer: 0e, GenCap- CGenEn- ChkCap-
ChkEn-
        Kernel driver in use: pcieport

00:05.0 PCI bridge [0604]: Intel Corporation E7520 PCI Express Port B1
[8086:3598] (rev 09) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=0c, subordinate=0e, sec-latency=0
        I/O behind bridge: 0000a000-0000bfff
        Memory behind bridge: fd900000-fddfffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] MSI: Enable+ Count=1/2 Maskable- 64bit-
                Address: fee0f00c  Data: 4169
        Capabilities: [64] Express (v1) Root Port (Slot-), MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- RBE- FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 256 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
                LnkCap: Port #5, Speed 2.5GT/s, Width x4, ASPM L0s,
Latency L0 <4us, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal+
PMEIntEna+ CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap-
ChkEn-
        Kernel driver in use: pcieport

00:06.0 PCI bridge [0604]: Intel Corporation E7520 PCI Express Port C
[8086:3599] (rev 09) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=0f, subordinate=11, sec-latency=0
        I/O behind bridge: 00009000-00009fff
        Memory behind bridge: fd800000-fd8fffff
        Prefetchable memory behind bridge: 00000000d8000000-00000000d8ffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] MSI: Enable+ Count=1/2 Maskable- 64bit-
                Address: fee0f00c  Data: 4171
        Capabilities: [64] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- RBE- FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq- AuxPwr-
TransPend-
                LnkCap: Port #6, Speed 2.5GT/s, Width x8, ASPM L0s,
Latency L0 <4us, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+
Surprise-
                        Slot #7, PowerLimit 25.000W; Interlock- NoCompl-
                SltCtl: Enable: AttnBtn+ PwrFlt+ MRL- PresDet+ CmdCplt-
HPIrq+ LinkChg-
                        Control: AttnInd Off, PwrInd Off, Power+ Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL+ CmdCplt+
PresDet- Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna+ CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO+ CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                AERCap: First Error Pointer: 0e, GenCap- CGenEn- ChkCap-
ChkEn-
        Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Dell Device [1028:016e]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 4: I/O ports at 7ce0 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Dell Device [1028:016e]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 19
        Region 4: I/O ports at 7cc0 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Dell Device [1028:016e]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 4: I/O ports at 7ca0 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
        Subsystem: Dell Device [1028:016e]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin D routed to IRQ 23
        Region 0: Memory at feb00000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev c2) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=12, subordinate=12, sec-latency=32
        I/O behind bridge: 00008000-00008fff
        Memory behind bridge: fd600000-fd7fffff
        Prefetchable memory behind bridge: c0000000-c7ffffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
Interface Bridge [8086:24d0] (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
        Subsystem: Dell Device [1028:016e]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
        Latency: 0
        Interrupt: pin A routed to IRQ 0
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at fc00 [size=16]
        Region 5: Memory at da100000 (32-bit, non-prefetchable) [size=1K]
        Kernel driver in use: ata_piix

01:00.0 PCI bridge [0604]: Intel Corporation 80332 [Dobson] I/O
processor (A-Segment Bridge) [8086:0330] (rev 06) (prog-if 00 [Normal
decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=01, secondary=02, subordinate=02, sec-latency=64
        Memory behind bridge: fe900000-feafffff
        Prefetchable memory behind bridge: 00000000d7f00000-00000000d7ffffff
        Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [44] Express (v1) PCI/PCI-X Bridge, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
BrConfRtry-
                        MaxPayload 256 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr-
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s,
Latency L0 unlimited, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
        Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [6c] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [d8] PCI-X bridge device
                Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD-
Freq=133MHz
                Status: Dev=01:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
                Upstream: Capacity=65535 CommitmentLimit=65535
                Downstream: Capacity=65535 CommitmentLimit=65535
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap-
ChkEn-
        Capabilities: [300 v1] Power Budgeting <?>

01:00.2 PCI bridge [0604]: Intel Corporation 80332 [Dobson] I/O
processor (B-Segment Bridge) [8086:0332] (rev 06) (prog-if 00 [Normal
decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=01, secondary=03, subordinate=05, sec-latency=32
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: fe500000-fe8fffff
        Prefetchable memory behind bridge: 00000000c8000000-00000000cfffffff
        Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [44] Express (v1) PCI/PCI-X Bridge, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
BrConfRtry-
                        MaxPayload 256 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr-
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s,
Latency L0 unlimited, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
        Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [6c] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [d8] PCI-X bridge device
                Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD-
Freq=conv
                Status: Dev=01:00.2 64bit- 133MHz- SCD- USC- SCO- SRD-
                Upstream: Capacity=65535 CommitmentLimit=65535
                Downstream: Capacity=65535 CommitmentLimit=65535
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap-
ChkEn-
        Capabilities: [300 v1] Power Budgeting <?>

02:0e.0 RAID bus controller [0104]: Dell PowerEdge Expandable RAID
controller 4 [1028:0013] (rev 06)
        Subsystem: Dell PowerEdge Expandable RAID Controller 4e/Di
[1028:016e]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping+ SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (32000ns min), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 46
        Region 0: Memory at d7ff0000 (32-bit, prefetchable) [size=64K]
        Region 2: Memory at fe9c0000 (32-bit, non-prefetchable) [size=256K]
        Expansion ROM at fea00000 [disabled] [size=128K]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [d0] MSI: Enable- Count=1/2 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [e0] PCI-X non-bridge device
                Command: DPERE- ERO- RBC=512 OST=4
                Status: Dev=02:0e.0 64bit+ 133MHz+ SCD- USC- DC=bridge
DMMRBC=1024 DMOST=4 DMCRS=16 RSCEM- 266MHz- 533MHz-
        Kernel driver in use: megaraid

03:0b.0 PCI bridge [0604]: Digital Equipment Corporation DECchip 21154
[1011:0026] (rev 05) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32
        Bus: primary=03, secondary=04, subordinate=05, sec-latency=32
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: fe600000-fe8fffff
        Prefetchable memory behind bridge: 00000000c8000000-00000000cfffffff
        Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [dc] Power Management version 1
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
                Bridge: PM- B3+

04:00.0 PCI bridge [0604]: Digital Equipment Corporation DECchip 21154
[1011:0026] (rev 05) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32
        Bus: primary=04, secondary=05, subordinate=05, sec-latency=32
        Memory behind bridge: fe800000-fe8fffff
        Prefetchable memory behind bridge: 00000000c8000000-00000000cfffffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [dc] Power Management version 1
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
                Bridge: PM- B3+

04:01.0 SCSI storage controller [0100]: QLogic Corp. ISP12160 Dual
Channel Ultra3 SCSI Processor [1077:1216] (rev 06)
        Subsystem: American Megatrends Inc. QLA12160 on AMI MegaRAID
[101e:8493]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (16000ns min), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 7
        Region 0: I/O ports at ec00 [size=256]
        Region 1: Memory at fe6ff000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at fe700000 [disabled] [size=128K]
        Capabilities: [44] Power Management version 1
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

05:00.0 I2O [0e00]: American Megatrends Inc. MegaRAID [101e:1960] (rev
20) (prog-if 01)
        Subsystem: Dell PowerEdge RAID Controller 3/DC [1028:0493]
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 37
        Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M]
        Expansion ROM at fe800000 [disabled] [size=64K]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

06:00.0 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI
Bridge A [8086:0329] (rev 09) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=06, secondary=07, subordinate=07, sec-latency=32
        Memory behind bridge: fe200000-fe3fffff
        Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [44] Express (v1) PCI/PCI-X Bridge, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
BrConfRtry-
                        MaxPayload 256 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr-
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s,
Latency L0 unlimited, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
        Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [6c] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [d8] PCI-X bridge device
                Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD-
Freq=conv
                Status: Dev=06:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
                Upstream: Capacity=65535 CommitmentLimit=65535
                Downstream: Capacity=65535 CommitmentLimit=65535
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap-
ChkEn-
        Capabilities: [300 v1] Power Budgeting <?>

06:00.2 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI
Bridge B [8086:032a] (rev 09) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=06, secondary=08, subordinate=08, sec-latency=32
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: fe000000-fe1fffff
        Prefetchable memory behind bridge: 00000000da000000-00000000da0fffff
        Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [44] Express (v1) PCI/PCI-X Bridge, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
BrConfRtry-
                        MaxPayload 256 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr-
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s,
Latency L0 unlimited, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
        Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [6c] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [d8] PCI-X bridge device
                Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD-
Freq=conv
                Status: Dev=06:00.2 64bit- 133MHz- SCD- USC- SCO- SRD-
                Upstream: Capacity=65535 CommitmentLimit=65535
                Downstream: Capacity=65535 CommitmentLimit=65535
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap-
ChkEn-
        Capabilities: [300 v1] Power Budgeting <?>

07:04.0 Ethernet controller [0200]: Intel Corporation 82543GC Gigabit
Ethernet Controller (Fiber) [8086:1001] (rev 02)
        Subsystem: Intel Corporation PRO/1000 F Server Adapter [8086:1003]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (63750ns min), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 106
        Region 0: Memory at fe2e0000 (32-bit, non-prefetchable) [size=128K]
        Region 1: Memory at fe2d0000 (32-bit, non-prefetchable) [size=64K]
        Expansion ROM at fe300000 [disabled] [size=64K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: e1000

08:02.0 SCSI storage controller [0100]: Adaptec AHA-3960D / AIC-7899A
U160/m [9005:00c0] (rev 01)
        Subsystem: Adaptec AHA-3960D U160/m [9005:f620]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 96
        BIST result: 00
        Region 0: I/O ports at dc00 [disabled] [size=256]
        Region 1: Memory at fe0ff000 (64-bit, non-prefetchable) [size=4K]
        Expansion ROM at fe100000 [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: aic7xxx

08:02.1 SCSI storage controller [0100]: Adaptec AHA-3960D / AIC-7899A
U160/m [9005:00c0] (rev 01)
        Subsystem: Adaptec AHA-3960D U160/m [9005:f620]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 97
        BIST result: 00
        Region 0: I/O ports at d800 [disabled] [size=256]
        Region 1: Memory at fe0fe000 (64-bit, non-prefetchable) [size=4K]
        Expansion ROM at da000000 [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: aic7xxx

0c:00.0 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI
Bridge A [8086:0329] (rev 09) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=0c, secondary=0d, subordinate=0d, sec-latency=32
        I/O behind bridge: 0000b000-0000bfff
        Memory behind bridge: fdc00000-fddfffff
        Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [44] Express (v1) PCI/PCI-X Bridge, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
BrConfRtry-
                        MaxPayload 256 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr-
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s,
Latency L0 unlimited, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
        Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [6c] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [d8] PCI-X bridge device
                Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD-
Freq=conv
                Status: Dev=0c:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
                Upstream: Capacity=65535 CommitmentLimit=65535
                Downstream: Capacity=65535 CommitmentLimit=65535
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap-
ChkEn-
        Capabilities: [300 v1] Power Budgeting <?>

0c:00.2 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI
Bridge B [8086:032a] (rev 09) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=0c, secondary=0e, subordinate=0e, sec-latency=32
        I/O behind bridge: 0000a000-0000afff
        Memory behind bridge: fda00000-fdbfffff
        Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [44] Express (v1) PCI/PCI-X Bridge, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
BrConfRtry-
                        MaxPayload 256 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr-
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s,
Latency L0 unlimited, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
        Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [6c] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [d8] PCI-X bridge device
                Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD-
Freq=conv
                Status: Dev=0c:00.2 64bit- 133MHz- SCD- USC- SCO- SRD-
                Upstream: Capacity=65535 CommitmentLimit=65535
                Downstream: Capacity=65535 CommitmentLimit=65535
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr-
                AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap-
ChkEn-
        Capabilities: [300 v1] Power Budgeting <?>

0d:07.0 Ethernet controller [0200]: Intel Corporation 82541GI Gigabit
Ethernet Controller [8086:1076] (rev 05)
        Subsystem: Dell PRO/1000 MT Network Connection [1028:016d]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (63750ns min), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 64
        Region 0: Memory at fdce0000 (32-bit, non-prefetchable) [size=128K]
        Region 2: I/O ports at bcc0 [size=64]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [e4] PCI-X non-bridge device
                Command: DPERE- ERO+ RBC=512 OST=1
                Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple
DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
        Kernel driver in use: e1000

0e:08.0 Ethernet controller [0200]: Intel Corporation 82541GI Gigabit
Ethernet Controller [8086:1076] (rev 05)
        Subsystem: Dell PRO/1000 MT Network Connection [1028:016d]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (63750ns min), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 65
        Region 0: Memory at fdae0000 (32-bit, non-prefetchable) [size=128K]
        Region 2: I/O ports at acc0 [size=64]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [e4] PCI-X non-bridge device
                Command: DPERE- ERO+ RBC=512 OST=1
                Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple
DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
        Kernel driver in use: e1000

12:0d.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon
RV100 QY [Radeon 7000/VE] [1002:5159] (prog-if 00 [VGA controller])
        Subsystem: Dell Device [1028:016e]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+
ParErr- Stepping+ SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (2000ns min), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at c0000000 (32-bit, prefetchable) [size=128M]
        Region 1: I/O ports at 8c00 [size=256]
        Region 2: Memory at fd6f0000 (32-bit, non-prefetchable) [size=64K]
        [virtual] Expansion ROM at fd600000 [disabled] [size=128K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-


** USB devices:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 413c:a001 Dell Computer Corp. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 6.0.2
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii  debconf [debconf-2.0]        1.5.36.1    Debian configuration
management sy
ii  initramfs-tools [linux-initr 0.98.8      tools for generating an
initramfs
ii  linux-base                   3.2~bpo60+1 Linux image base package
ii  module-init-tools            3.12-1      tools for managing Linux
kernel mo

Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii  firmware-linux-free           2.6.32-35  Binary firmware for various
driver

Versions of packages linux-image-2.6.32-5-amd64 suggests:
ii  grub                          0.97-64    GRand Unified Bootloader
(dummy pa
pn  linux-doc-2.6.32              <none>     (no description available)

Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
ii  firmware-linux-nonfree        0.28       Binary firmware for various
driver
ii  firmware-qlogic               0.28       Binary firmware for QLogic
IBA7220
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
* linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
  linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
 
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64:
false
 
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64:
true



--- End Message ---
--- Begin Message ---
Version: 3.4.1-1~experimental.1+rm

Debian 6.0 Long Term Support is now ending, and the 'linux-2.6' source
package will no longer be updated.  This bug is being closed on the
assumption that it does not affect the kernel versions in newer Debian
releases.

If you can still reproduce this bug in a newer release, please reopen
the bug report and reassign it to 'src:linux' and the affected version
of the package.  You can find the package version for the running
kernel by running:

    uname -v

or the versions of all installed kernel packages by running:

    dpkg -l 'linux-image-[34]*' | grep ^.i

and looking at the third column.

I apologise that we weren't able to provide a specific resolution for
this bug.

Ben.

-- 
Ben Hutchings - Debian developer, member of Linux kernel and LTS teams

--- End Message ---

Reply to: