[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#633919: marked as done (/lib/modules/2.6.39-2-amd64/kernel/net/wireless/cfg80211.ko: cfg80211 calling CRDA drops wireless connection, clears ssid)



Your message dated Tue, 09 Feb 2016 15:25:42 +0000
with message-id <E1aTAAg-0004hr-MV@deadeye>
and subject line Closing bugs assigned to linux-2.6 package
has caused the Debian Bug report #633919,
regarding /lib/modules/2.6.39-2-amd64/kernel/net/wireless/cfg80211.ko: cfg80211 calling CRDA drops wireless connection, clears ssid
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
633919: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=633919
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.39-2
Severity: important
File: /lib/modules/2.6.39-2-amd64/kernel/net/wireless/cfg80211.ko
Tags: upstream


I have a Lenovo Thinkpad T420, with "Intel(R) Centrino(R) Advanced-N 6205 AGN"
wireless card.  wheezy is installed.  I sometimes connect to one of two
different wireless networks, both unsecured (I configure the wireless through
/etc/network/interfaces).  In both instances, the connection will drop several
times per day, without any provocation.  Another wheezy install on different
hardware had no such problems.  I imagine the issue is with the wireless card,
as that seems to be the most relevant hardware difference between the new laptop
and the old laptop.

The network interrupts are strange, in that they leave essentially no
trace in 'dmesg'.  Things do register via 'iwevent':

2011-07-13 22:08 [root@******* miforbes]# iwevent
Waiting for Wireless Events from interfaces...
23:27:39.200445   wlan0    New Access Point/Cell address:Not-Associated

after this event `iwconfig' shows no essid associated with wlan0:

2011-07-14 20:23 [~]$ /sbin/iwconfig 
lo        no wireless extensions.

eth0      no wireless extensions.

wlan0     IEEE 802.11abg  ESSID:off/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=15 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off

The "normal" output of 'iwconfig' is:

2011-07-14 20:44 [root@********* miforbes]# iwconfig 
lo        no wireless extensions.

eth0      no wireless extensions.

wlan0     IEEE 802.11abg  ESSID:"********"                                                                                                                                                                                         
          Mode:Managed  Frequency:2.412 GHz  Access Point: **************                                                                                                                                                     
          Bit Rate=48 Mb/s   Tx-Power=15 dBm                                                                                                                                                                                        
          Retry  long limit:7   RTS thr:off   Fragment thr:off                                                                                                                                                                      
          Encryption key:off                                                                                                                                                                                                        
          Power Management:off                                                                                                                                                                                                      
          Link Quality=43/70  Signal level=-67 dBm                                                                                                                                                                                  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0                                                                                                                                                                  
          Tx excessive retries:0  Invalid misc:61   Missed beacon:0 

so it seems like the signal strength is decent.

Restoring the essid with 'iwconfig wlan0 essid ******' fixes the
problem, no need to even restart dhcp.  Interestingly, the last thing that
appears in dmesg before the disconnect is always

[ 1280.279761] cfg80211: Calling CRDA to update world regulatory domain
[ 1280.287981] cfg80211: World regulatory domain updated:
[ 1280.287989] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1280.287997] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1280.288005] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1280.288011] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1280.288017] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1280.288024] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1280.288047] cfg80211: Calling CRDA for country: US
[ 1280.296588] cfg80211: Regulatory domain changed to country: US
[ 1280.296596] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1280.296604] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 1280.296611] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 1280.296618] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1280.296624] cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1280.296630] cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1280.296636] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)

(the below dmesg output has this happen twice, note the afs server
losing internet access).

Various searches indicate to me that cfg80211 is reseting the
connection, and that this is causing the problem.  However, I cannot
identify why it is being called.

I have tried several things to fix this.  I've tried the options:

options iwlagn 11n_disable=1 11n_disable50=1

as well as

options iwlagn swcrypto50=1 swcrypto=1

and 

options cfg80211 ieee80211_regdom=US

in modprobe.d conf files (currently these are all enabled).  Initially crda was not even installed, and I
took this as the reason the wireless was failing, that is the dmesg just
showed:

[12626.267794] cfg80211: Calling CRDA to update world regulatory domain
[12758.689580] afs: Lost contact with file server 18.9.60.13 in cell athena.mit.edu (all multi-homed ip addresses down for the server)
[12758.689590] afs: Lost contact with file server 18.9.60.13 in cell athena.mit.edu (all multi-homed ip addresses down for the server)

without crda actually being run.  So I installed
crda.deb and iw.deb from the repository, but this only produced more verbose output in dmesg
with regards to what crda was doing.

I have also upgraded my firmware from the version in wheezy, to the latest
version from the firmware homepage http://intellinuxwireless.org/.

The disconnects seem to happen during network inactivity as well as
activity (including leaving a ping running).  

I thought at one point it might be some sort of power management issue, but this
doesn't seem to make sense given the reliable connection to cfg80211, which I
don't think has a connection to power management.

It seems likely (but I haven't tried) that a network configuration daemon (networkmanager,wicd) could
solve this problem by reconnecting on each disconnect, but this seems to only
mask the issue.

I've had a remarkable lack of success in finding similar bugs, and am not
entirely sure that cfg80211 is actually the problem.  However the following
URL's seem vaguely similar to my problem:

http://www.linuxforums.org/forum/slackware-linux/171903-avoid-calling-crda.html
http://osdir.com/ml/debian-kernel/2011-05/msg00480.html	
http://www.devheads.net/linux/fedora/user/how-can-i-stop-network-scan-cfg80211.htm

Any help would really be appreciated.

-Michael
miforbes@mit.edu

-- Package-specific info:
** Version:
Linux version 2.6.39-2-amd64 (Debian 2.6.39-2) (ben@decadent.org.uk) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Wed Jun 8 11:01:04 UTC 2011

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.39-2-amd64 root=/dev/mapper/vg0-lv0 ro quiet

** Tainted: PO (4097)
 * Proprietary module has been loaded.
 * Out-of-tree module has been loaded.

** Kernel log:
[   10.797325] i915 0000:00:02.0: power state changed by ACPI to D0
[   10.797330] i915 0000:00:02.0: power state changed by ACPI to D0
[   10.797335] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   10.797338] i915 0000:00:02.0: setting latency timer to 64
[   10.810797] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[   10.810800] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[   10.810895] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   10.810905] iwlagn 0000:03:00.0: setting latency timer to 64
[   10.810948] iwlagn 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[   10.821599] iwlagn 0000:03:00.0: device EEPROM VER=0x715, CALIB=0x6
[   10.821601] iwlagn 0000:03:00.0: Device SKU: 0Xb
[   10.821602] iwlagn 0000:03:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3
[   10.821640] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[   10.821736] iwlagn 0000:03:00.0: irq 46 for MSI/MSI-X
[   10.825203] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[   10.825209] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   10.825211] [drm] Driver supports precise vblank timestamp query.
[   10.832932] usbcore: registered new interface driver usbserial
[   10.833066] USB Serial support registered for generic
[   10.833081] usbcore: registered new interface driver usbserial_generic
[   10.833083] usbserial: USB Serial Driver core
[   10.853725] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[   10.962357] USB Serial support registered for GSM modem (1-port)
[   10.962378] usbcore: registered new interface driver option
[   10.962380] option: v0.7.2:USB Driver for GSM modems
[   11.008914] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   11.008918] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[   11.025234] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000
[   11.025251] serio: Synaptics pass-through port at isa0060/serio1/input0
[   11.061364] fbcon: inteldrmfb (fb0) is primary device
[   11.074747] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[   11.076636] usb 1-1: new high speed USB device number 2 using ehci_hcd
[   11.090472] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[   11.090474] thinkpad_acpi: http://ibm-acpi.sf.net/
[   11.090475] thinkpad_acpi: ThinkPad BIOS 83ET57WW (1.27 ), EC unknown
[   11.090476] thinkpad_acpi: Lenovo ThinkPad T420, model 4177CTO
[   11.090806] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[   11.090928] thinkpad_acpi: radio switch found; radios are enabled
[   11.093207] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[   11.093547] Registered led device: tpacpi::thinklight
[   11.093589] Registered led device: tpacpi::power
[   11.093627] Registered led device: tpacpi::standby
[   11.093651] Registered led device: tpacpi::thinkvantage
[   11.093717] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
[   11.093813] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[   11.094763] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[   11.136617] firewire_core: created device fw0: GUID 0021cc200604cf76, S400
[   11.184246] iwlagn 0000:03:00.0: loaded firmware version 17.168.5.3 build 42301
[   11.184678] Registered led device: phy0-led
[   11.213003] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[   11.213005] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   11.213258] hub 1-1:1.0: USB hub found
[   11.213348] hub 1-1:1.0: 6 ports detected
[   11.234146] Console: switching to colour frame buffer device 200x56
[   11.237099] fb0: inteldrmfb frame buffer device
[   11.237100] drm: registered panic notifier
[   11.258057] acpi device:01: registered as cooling_device4
[   11.258165] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[   11.258215] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[   11.259976] acpi device:0b: registered as cooling_device5
[   11.260139] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input8
[   11.260185] ACPI: Video Device [VID1] (multi-head: yes  rom: yes  post: no)
[   11.260318] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   11.260674] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.260737] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[   11.260766] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   11.314561] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   11.324321] usb 2-1: new high speed USB device number 2 using ehci_hcd
[   11.325853] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[   11.456569] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[   11.456579] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   11.456808] hub 2-1:1.0: USB hub found
[   11.456878] hub 2-1:1.0: 8 ports detected
[   11.528168] usb 1-1.4: new full speed USB device number 3 using ehci_hcd
[   11.628974] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[   11.628984] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   11.628989] usb 1-1.4: Product: Broadcom Bluetooth Device
[   11.628994] usb 1-1.4: Manufacturer: Broadcom Corp
[   11.628998] usb 1-1.4: SerialNumber: EC55F9F020A9
[   11.700014] usb 1-1.6: new high speed USB device number 4 using ehci_hcd
[   11.798074] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b221
[   11.798084] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   11.798090] usb 1-1.6: Product: Integrated Camera
[   11.798094] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[   11.872744] Linux media interface: v0.10
[   11.890290] Linux video capture interface: v2.00
[   11.894359] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b221)
[   11.896091] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input10
[   11.896149] usbcore: registered new interface driver uvcvideo
[   11.896151] USB Video Class driver (v1.0.0)
[   11.936280] Bluetooth: Core ver 2.16
[   11.936304] NET: Registered protocol family 31
[   11.936305] Bluetooth: HCI device and connection manager initialized
[   11.936308] Bluetooth: HCI socket layer initialized
[   11.936310] Bluetooth: L2CAP socket layer initialized
[   11.936342] Bluetooth: SCO socket layer initialized
[   11.947642] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   11.947801] usbcore: registered new interface driver btusb
[   12.016245] cfg80211: World regulatory domain updated:
[   12.016248] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.016251] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.016253] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.016254] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.016256] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.016258] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.016404] cfg80211: Calling CRDA for country: US
[   12.019046] cfg80211: Regulatory domain changed to country: US
[   12.019048] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.019051] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   12.019053] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   12.019055] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.019057] cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.019058] cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.019060] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   13.293481] EXT4-fs (dm-1): re-mounted. Opts: (null)
[   13.470535] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[   13.601417] loop: module loaded
[   14.135619] Adding 7811068k swap on /dev/mapper/vg0-lv2.  Priority:-1 extents:1 across:7811068k 
[   15.055780] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   15.068529] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[   15.198602] EXT3-fs: barriers not enabled
[   15.203989] kjournald starting.  Commit interval 5 seconds
[   15.204032] EXT3-fs (loop0): warning: maximal mount count reached, running e2fsck is recommended
[   15.204408] EXT3-fs (loop0): using internal journal
[   15.204411] EXT3-fs (loop0): recovery complete
[   15.204413] EXT3-fs (loop0): mounted filesystem with ordered data mode
[   15.280129] EXT3-fs: barriers not enabled
[   15.299891] kjournald starting.  Commit interval 5 seconds
[   15.299932] EXT3-fs (loop1): warning: maximal mount count reached, running e2fsck is recommended
[   15.300199] EXT3-fs (loop1): using internal journal
[   15.300202] EXT3-fs (loop1): recovery complete
[   15.300205] EXT3-fs (loop1): mounted filesystem with ordered data mode
[   15.355451] EXT3-fs: barriers not enabled
[   15.363980] kjournald starting.  Commit interval 5 seconds
[   15.363991] EXT3-fs (loop2): warning: maximal mount count reached, running e2fsck is recommended
[   15.364349] EXT3-fs (loop2): using internal journal
[   15.364351] EXT3-fs (loop2): recovery complete
[   15.364354] EXT3-fs (loop2): mounted filesystem with ordered data mode
[   16.719572] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.511021] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   17.767364] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input11
[   96.429069] fuse init (API version 7.16)
[   97.691134] lp: driver loaded but no devices found
[   97.724516] Disabling lock debugging due to kernel taint
[   97.724522] openafs: module license 'http://www.openafs.org/dl/license10.html' taints kernel.
[   97.837099] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[   97.901981] ppdev: user-space parallel port driver
[   98.318111] enabling dynamically allocated vcaches
[   98.318113] Starting AFS cache scan...
[   98.632250] ip_tables: (C) 2000-2006 Netfilter Core Team
[   99.386592] sshd (2098): /proc/2098/oom_adj is deprecated, please use /proc/2098/oom_score_adj instead.
[   99.669028] found 607 non-empty cache files (7%).
[  100.054534] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[  100.197009] Bluetooth: RFCOMM TTY layer initialized
[  100.197013] Bluetooth: RFCOMM socket layer initialized
[  100.197014] Bluetooth: RFCOMM ver 1.11
[  100.207523] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  100.207532] Bluetooth: BNEP filters: protocol multicast
[  103.571707] e1000e 0000:00:19.0: PME# enabled
[  121.985770] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=0
[  122.201202] EXT4-fs (sda5): re-mounted. Opts: commit=0
[  122.469208] EXT4-fs (dm-4): re-mounted. Opts: commit=0
[  146.913978] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  150.147872] wlan0: authenticate with 16:18:0a:30:23:5c (try 1)
[  150.176008] wlan0: authenticated
[  150.176447] wlan0: associate with 16:18:0a:30:23:5c (try 1)
[  150.208221] wlan0: RX AssocResp from 16:18:0a:30:23:5c (capab=0x21 status=0 aid=3)
[  150.208230] wlan0: associated
[  150.210942] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  150.211200] cfg80211: Calling CRDA for country: US
[  150.219363] cfg80211: Regulatory domain changed to country: US
[  150.219371] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  150.219380] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[  150.219386] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[  150.219392] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  150.219398] cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  150.219405] cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  150.219411] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[  160.685714] wlan0: no IPv6 routers present
[ 1280.279761] cfg80211: Calling CRDA to update world regulatory domain
[ 1280.287981] cfg80211: World regulatory domain updated:
[ 1280.287989] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1280.287997] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1280.288005] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1280.288011] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1280.288017] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1280.288024] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1280.288047] cfg80211: Calling CRDA for country: US
[ 1280.296588] cfg80211: Regulatory domain changed to country: US
[ 1280.296596] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1280.296604] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 1280.296611] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 1280.296618] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1280.296624] cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1280.296630] cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1280.296636] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 1383.107768] afs: Lost contact with file server 18.9.60.13 in cell athena.mit.edu (all multi-homed ip addresses down for the server)
[ 1383.107779] afs: Lost contact with file server 18.9.60.13 in cell athena.mit.edu (all multi-homed ip addresses down for the server)
[ 1859.769728] afs: Lost contact with file server 18.9.60.94 in cell athena.mit.edu (all multi-homed ip addresses down for the server)
[ 1859.769740] afs: Lost contact with file server 18.9.60.94 in cell athena.mit.edu (all multi-homed ip addresses down for the server)
[ 1870.460644] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1872.212104] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1872.213996] wlan0: authenticate with 16:18:0a:30:23:5c (try 1)
[ 1872.267404] wlan0: authenticated
[ 1872.269214] wlan0: associate with 16:18:0a:30:23:5c (try 1)
[ 1872.296344] wlan0: RX AssocResp from 16:18:0a:30:23:5c (capab=0x21 status=0 aid=3)
[ 1872.296353] wlan0: associated
[ 1872.300500] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1872.300649] cfg80211: Calling CRDA for country: US
[ 1872.308520] cfg80211: Regulatory domain changed to country: US
[ 1872.308527] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1872.308535] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 1872.308543] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 1872.308549] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1872.308555] cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1872.308561] cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1872.308567] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 1876.882912] afs: Lost contact with file server 18.9.60.97 in cell athena.mit.edu (all multi-homed ip addresses down for the server)
[ 1876.882924] afs: Lost contact with file server 18.9.60.97 in cell athena.mit.edu (all multi-homed ip addresses down for the server)
[ 1882.902834] wlan0: no IPv6 routers present
[ 1885.469028] afs: file server 18.9.60.97 in cell athena.mit.edu is back up (multi-homed address; other same-host interfaces may still be down)
[ 1885.469039] afs: file server 18.9.60.97 in cell athena.mit.edu is back up (multi-homed address; other same-host interfaces may still be down)
[ 1885.469049] afs: file server 18.9.60.13 in cell athena.mit.edu is back up (multi-homed address; other same-host interfaces may still be down)
[ 1885.469057] afs: file server 18.9.60.13 in cell athena.mit.edu is back up (multi-homed address; other same-host interfaces may still be down)
[ 1885.469065] afs: file server 18.9.60.94 in cell athena.mit.edu is back up (multi-homed address; other same-host interfaces may still be down)
[ 1885.469072] afs: file server 18.9.60.94 in cell athena.mit.edu is back up (multi-homed address; other same-host interfaces may still be down)
[ 1959.091794] ''OUT-internet':'IN= OUT=wlan0 SRC=10.33.3.109 DST=72.47.193.52 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=TCP SPT=59898 DPT=80 WINDOW=0 RES=0x00 RST URGP=0 
[ 6023.006347] cfg80211: Calling CRDA to update world regulatory domain
[ 6023.014480] cfg80211: World regulatory domain updated:
[ 6023.014488] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6023.014496] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6023.014503] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6023.014509] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6023.014515] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6023.014521] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6023.014544] cfg80211: Calling CRDA for country: US
[ 6023.022918] cfg80211: Regulatory domain changed to country: US
[ 6023.022926] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6023.022934] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 6023.022941] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 6023.022969] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6023.022979] cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6023.022987] cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6023.022996] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 6148.544135] iwlagn 0000:03:00.0: Error: Response NULL in 'REPLY_ADD_STA'
[ 6148.544150] iwlagn 0000:03:00.0: Adding station ff:ff:ff:ff:ff:ff failed.
[ 6148.545239] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6149.779715] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6149.780084] wlan0: authenticate with 16:18:0a:30:23:5c (try 1)
[ 6149.819507] wlan0: authenticated
[ 6149.821014] wlan0: associate with 16:18:0a:30:23:5c (try 1)
[ 6149.837640] wlan0: RX AssocResp from 16:18:0a:30:23:5c (capab=0x21 status=0 aid=3)
[ 6149.837652] wlan0: associated
[ 6149.840630] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 6149.840794] cfg80211: Calling CRDA for country: US
[ 6149.848763] cfg80211: Regulatory domain changed to country: US
[ 6149.848770] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6149.848779] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 6149.848786] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 6149.848792] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6149.848798] cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6149.848804] cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6149.848810] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 6160.097802] wlan0: no IPv6 routers present

** Model information
sys_vendor: LENOVO
product_name: 4177CTO
product_version: ThinkPad T420
chassis_vendor: LENOVO
chassis_version: Not Available
bios_vendor: LENOVO
bios_version: 83ET57WW (1.27 )
board_vendor: LENOVO
board_name: 4177CTO
board_version: Not Available

** Loaded modules:
Module                  Size  Used by
nf_conntrack_ftp       12572  0 
nf_conntrack_irc       12427  0 
xt_tcpudp              12527  28 
xt_state               12503  35 
ipt_LOG                12605  12 
xt_limit               12638  14 
bnep                   17424  2 
rfcomm                 32744  8 
nf_conntrack_ipv4      18081  35 
nf_conntrack           56001  4 nf_conntrack_ftp,nf_conntrack_irc,xt_state,nf_conntrack_ipv4
nf_defrag_ipv4         12483  1 nf_conntrack_ipv4
iptable_filter         12536  1 
ip_tables              21818  1 iptable_filter
x_tables               18886  6 xt_tcpudp,xt_state,ipt_LOG,xt_limit,iptable_filter,ip_tables
parport_pc             22191  0 
ppdev                  12725  0 
openafs               623927  2 
lp                     17190  0 
parport                31650  3 parport_pc,ppdev,lp
acpi_cpufreq           12849  1 
mperf                  12411  1 acpi_cpufreq
cpufreq_conservative    13147  0 
cpufreq_userspace      12576  0 
cpufreq_stats          12713  0 
cpufreq_powersave      12454  0 
uinput                 17392  1 
fuse                   61554  3 
ext3                  112254  3 
jbd                    41698  1 ext3
loop                   22479  6 
firewire_sbp2          17825  0 
btusb                  17417  2 
bluetooth             107224  23 bnep,rfcomm,btusb
uvcvideo               57386  0 
videodev               66266  1 uvcvideo
media                  18148  1 videodev
v4l2_compat_ioctl32    16575  1 videodev
snd_hda_codec_conexant    40393  1 
arc4                   12458  2 
ecb                    12737  2 
snd_hda_intel          25946  0 
joydev                 17138  0 
snd_hda_codec          67865  2 snd_hda_codec_conexant,snd_hda_intel
thinkpad_acpi          60656  0 
snd_hwdep              13148  1 snd_hda_codec
snd_pcm                67276  2 snd_hda_intel,snd_hda_codec
option                 24802  0 
usb_wwan               17206  1 option
snd_seq                44678  0 
usbserial              31986  2 option,usb_wwan
snd_timer              22658  2 snd_pcm,snd_seq
iwlagn                174901  0 
nouveau               515735  0 
i915                  329754  2 
ehci_hcd               39487  0 
sdhci_pci              13184  0 
usbcore               127203  7 btusb,uvcvideo,option,usb_wwan,usbserial,ehci_hcd
i2c_i801               16870  0 
sg                     25769  0 
ttm                    52224  1 nouveau
snd_seq_device         13155  1 snd_seq
drm_kms_helper         26950  2 nouveau,i915
snd                    52324  9 snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,thinkpad_acpi,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
mac80211              181270  1 iwlagn
soundcore              13014  1 snd
firewire_ohci          35027  0 
cfg80211              126244  2 iwlagn,mac80211
sdhci                  21685  1 sdhci_pci
snd_page_alloc         12969  2 snd_hda_intel,snd_pcm
firewire_core          47790  2 firewire_sbp2,firewire_ohci
drm                   166500  5 nouveau,i915,ttm,drm_kms_helper
sr_mod                 21824  0 
e1000e                128034  0 
cdrom                  35134  1 sr_mod
i2c_algo_bit           12834  2 nouveau,i915
i2c_core               23766  7 videodev,nouveau,i915,i2c_i801,drm_kms_helper,drm,i2c_algo_bit
mmc_core               58824  1 sdhci
nvram                  12997  1 thinkpad_acpi
rfkill                 19014  4 bluetooth,thinkpad_acpi,cfg80211
ac                     12624  0 
psmouse                55199  0 
evdev                  17475  28 
serio_raw              12878  0 
battery                13109  0 
power_supply           13475  3 nouveau,ac,battery
pcspkr                 12579  0 
button                 12895  2 nouveau,i915
processor              27431  5 acpi_cpufreq
video                  17553  2 nouveau,i915
wmi                    13202  0 
crc_itu_t              12347  1 firewire_core
ext4                  317160  3 
mbcache                12930  2 ext3,ext4
jbd2                   65105  1 ext4
crc16                  12343  2 bluetooth,ext4
sha256_generic         16797  2 
aes_x86_64             16796  16 
aes_generic            37122  1 aes_x86_64
cbc                    12747  8 
dm_crypt               22257  1 
dm_mod                 62468  14 dm_crypt
sd_mod                 35644  3 
crc_t10dif             12348  1 sd_mod
ahci                   25089  2 
libahci                22616  1 ahci
libata                151572  2 ahci,libahci
scsi_mod              161557  5 firewire_sbp2,sg,sr_mod,sd_mod,libata
thermal                17330  0 
thermal_sys            17939  3 processor,video,thermal

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

#auto eth0
#iface eth0 inet static
#	address  192.168.1.2
#	netmask 255.255.255.0
#	gateway 192.168.1.1

#mapping eth0
#	script ifscheme-mapping

auto wlan0
allow-hotplug wlan0

mapping wlan0
	script ifscheme-mapping

iface wlan0-s inet dhcp
	wireless-essid **********

iface wlan0-sr inet dhcp
	wireless-essid **********

#essid's cleared for privacy

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
    link/ether 00:21:cc:5f:7e:d7 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
    link/ether a0:88:b4:68:59:e4 brd ff:ff:ff:ff:ff:ff
    inet 10.33.3.109/21 brd 10.33.7.255 scope global wlan0
    inet6 fe80::a288:b4ff:fe68:59e4/64 scope link 
       valid_lft forever preferred_lft forever

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
    lo:  213946    1203    0    0    0     0          0         0   213946    1203    0    0    0     0       0          0
  eth0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
 wlan0: 50729748  216624    0    0    0     0          0         0  4837104   28310    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    169646 total packets received
    2707 with invalid addresses
    0 forwarded
    0 incoming packets discarded
    28020 incoming packets delivered
    30054 requests sent out
    1 outgoing packets dropped
    324 dropped because of missing route
    55 reassemblies required
    25 packets reassembled ok
Icmp:
    1404 ICMP messages received
    0 input ICMP message failed.
    ICMP input histogram:
        destination unreachable: 388
        echo replies: 1016
    1518 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        destination unreachable: 390
        echo request: 1128
IcmpMsg:
        InType0: 1016
        InType3: 388
        OutType3: 390
        OutType8: 1128
Tcp:
    1337 active connections openings
    0 passive connection openings
    23 failed connection attempts
    74 connection resets received
    24 connections established
    20445 segments received
    21165 segments send out
    312 segments retransmited
    0 bad segments received.
    398 resets sent
Udp:
    5494 packets received
    22 packets to unknown port received.
    0 packet receive errors
    7056 packets sent
UdpLite:
TcpExt:
    696 TCP sockets finished time wait in fast timer
    38 packets rejects in established connections because of timestamp
    827 delayed acks sent
    Quick ack mode was activated 238 times
    491 packets directly queued to recvmsg prequeue.
    481339 bytes directly received in process context from prequeue
    12214 packet headers predicted
    438 packets header predicted and directly queued to user
    2319 acknowledgments not containing data payload received
    321 predicted acknowledgments
    5 congestion windows recovered without slow start by DSACK
    201 congestion windows recovered without slow start after partial ack
    1 timeouts after SACK recovery
    1 timeouts in loss state
    12 retransmits in slow start
    272 other TCP timeouts
    201 DSACKs sent for old packets
    126 DSACKs received
    70 connections reset due to unexpected data
    32 connections reset due to early user close
    TCPDSACKIgnoredOld: 25
    TCPDSACKIgnoredNoUndo: 25
    TCPSpuriousRTOs: 2
IpExt:
    InMcastPkts: 31610
    OutMcastPkts: 184
    InBcastPkts: 76703
    InOctets: 45706267
    OutOctets: 4148703
    InMcastOctets: 6382150
    OutMcastOctets: 20111
    InBcastOctets: 11700118

*** Device features:
eth0: 0x1149a9
lo: 0x201b7c65
wlan0: 0x6000

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
	Subsystem: Lenovo Device [17aa:21ce]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel

00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00005000-00005fff
	Memory behind bridge: f0000000-f10fffff
	Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller])
	Subsystem: Lenovo Device [17aa:21d0]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 47
	Region 0: Memory at f1400000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at 6000 [size=64]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: i915

00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family HECI Controller #1 [8086:1c3a] (rev 04)
	Subsystem: Lenovo Device [17aa:21ce]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at f3a25000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>

00:16.3 Serial controller [0700]: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller [8086:1c3d] (rev 04) (prog-if 02 [16550])
	Subsystem: Lenovo Device [17aa:21ce]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at 60b0 [size=8]
	Region 1: Memory at f3a2c000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: serial

00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
	Subsystem: Lenovo Device [17aa:21ce]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 44
	Region 0: Memory at f3a00000 (32-bit, non-prefetchable) [disabled] [size=128K]
	Region 1: Memory at f3a2b000 (32-bit, non-prefetchable) [disabled] [size=4K]
	Region 2: I/O ports at 6080 [disabled] [size=32]
	Capabilities: <access denied>
	Kernel driver in use: e1000e

00:1a.0 USB Controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Lenovo Device [17aa:21ce]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f3a2a000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04)
	Subsystem: Lenovo Device [17aa:21ce]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 48
	Region 0: Memory at f3a20000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Memory behind bridge: f3900000-f39fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: f3100000-f38fffff
	Prefetchable memory behind bridge: 00000000f1800000-00000000f1ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: f2800000-f30fffff
	Prefetchable memory behind bridge: 00000000f2000000-00000000f27fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Lenovo Device [17aa:21ce]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at f3a29000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1f.0 ISA bridge [0601]: Intel Corporation QM67 Express Chipset Family LPC Controller [8086:1c4f] (rev 04)
	Subsystem: Lenovo Device [17aa:21ce]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) (prog-if 01 [AHCI 1.0])
	Subsystem: Lenovo Device [17aa:21ce]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 43
	Region 0: I/O ports at 60a8 [size=8]
	Region 1: I/O ports at 60bc [size=4]
	Region 2: I/O ports at 60a0 [size=8]
	Region 3: I/O ports at 60b8 [size=4]
	Region 4: I/O ports at 6060 [size=32]
	Region 5: Memory at f3a28000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04)
	Subsystem: Lenovo Device [17aa:21ce]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at f3a24000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at efa0 [size=32]
	Kernel driver in use: i801_smbus

01:00.0 VGA compatible controller [0300]: nVidia Corporation Device [10de:1057] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: Lenovo Device [17aa:21d0]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f0000000 (32-bit, non-prefetchable) [disabled] [size=16M]
	Region 1: Memory at c0000000 (64-bit, prefetchable) [disabled] [size=256M]
	Region 3: Memory at d0000000 (64-bit, prefetchable) [disabled] [size=32M]
	Region 5: I/O ports at 5000 [disabled] [size=128]
	Expansion ROM at f1000000 [disabled] [size=512K]
	Capabilities: <access denied>

03:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205 [8086:0085] (rev 34)
	Subsystem: Intel Corporation Centrino Advanced-N 6205 AGN [8086:1311]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 46
	Region 0: Memory at f3900000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: iwlagn

0d:00.0 System peripheral [0880]: Ricoh Co Ltd Device [1180:e823] (rev 05) (prog-if 01)
	Subsystem: Lenovo Device [17aa:21ce]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f2801000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: sdhci-pci

0d:00.3 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd FireWire Host Controller [1180:e832] (rev 04) (prog-if 10 [OHCI])
	Subsystem: Lenovo Device [17aa:21ce]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin D routed to IRQ 45
	Region 0: Memory at f2800000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: firewire_ohci


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 0a5c:217f Broadcom Corp. Bluetooth Controller
Bus 001 Device 004: ID 04f2:b221 Chicony Electronics Co., Ltd 


-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.39-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.39-2-amd64 depends on:
ii  debconf [debconf-2.0]         1.5.40     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.99       tools for generating an initramfs
ii  linux-base                    3.2        Linux image base package
ii  module-init-tools             3.16-1     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.39-2-amd64 recommends:
pn  firmware-linux-free           <none>     (no description available)

Versions of packages linux-image-2.6.39-2-amd64 suggests:
ii  grub-pc                       1.99-6     GRand Unified Bootloader, version 
pn  linux-doc-2.6.39              <none>     (no description available)

Versions of packages linux-image-2.6.39-2-amd64 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
ii  firmware-iwlwifi              0.30       Binary firmware for Intel Wireless
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
  linux-image-2.6.39-2-amd64/postinst/depmod-error-initrd-2.6.39-2-amd64: false
  linux-image-2.6.39-2-amd64/postinst/ignoring-ramdisk:
  linux-image-2.6.39-2-amd64/prerm/removing-running-kernel-2.6.39-2-amd64: true
  linux-image-2.6.39-2-amd64/postinst/missing-firmware-2.6.39-2-amd64:



--- End Message ---
--- Begin Message ---
Version: 3.4.1-1~experimental.1+rm

Debian 6.0 Long Term Support is now ending, and the 'linux-2.6' source
package will no longer be updated.  This bug is being closed on the
assumption that it does not affect the kernel versions in newer Debian
releases.

If you can still reproduce this bug in a newer release, please reopen
the bug report and reassign it to 'src:linux' and the affected version
of the package.  You can find the package version for the running
kernel by running:

    uname -v

or the versions of all installed kernel packages by running:

    dpkg -l 'linux-image-[34]*' | grep ^.i

and looking at the third column.

I apologise that we weren't able to provide a specific resolution for
this bug.

Ben.

-- 
Ben Hutchings - Debian developer, member of Linux kernel and LTS teams

--- End Message ---

Reply to: