Bug#624486: marked as done (linux-image-2.6.38-2-amd64: bug in radeon driver module of linux 2.6.38 (since 2.6.35))

To: Ben Hutchings <benh@debian.org>
Subject: Bug#624486: marked as done (linux-image-2.6.38-2-amd64: bug in radeon driver module of linux 2.6.38 (since 2.6.35))
From: owner@bugs.debian.org (Debian Bug Tracking System)
Date: Tue, 09 Feb 2016 15:29:50 +0000
Message-id: <[🔎] handler.624486.D624486.145503156110612.ackdone@bugs.debian.org>
References: <E1aTAAg-0004ha-Kz@deadeye> <20110428192343.29780.31278.reportbug@lilith.rbi.informatik.uni-frankfurt.de>

Your message dated Tue, 09 Feb 2016 15:25:42 +0000
with message-id <E1aTAAg-0004ha-Kz@deadeye>
and subject line Closing bugs assigned to linux-2.6 package
has caused the Debian Bug report #624486,
regarding linux-image-2.6.38-2-amd64: bug in radeon driver module of linux 2.6.38 (since 2.6.35)
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
624486: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=624486
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems

--- Begin Message ---

To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: linux-image-2.6.38-2-amd64: bug in radeon driver module of linux 2.6.38 (since 2.6.35)
From: Martin Teufel <martin@informatik.uni-frankfurt.de>
Date: Thu, 28 Apr 2011 21:23:43 +0200
Message-id: <20110428192343.29780.31278.reportbug@lilith.rbi.informatik.uni-frankfurt.de>

Package: linux-2.6
Version: 2.6.38-3
Severity: important

Hi,

I encountered a bug in the radeon driver module of 2.6.37 which still exists in 2.6.38.
I have a mainboard called M2A-VM which has VGA, DVI and display port as graphic output ports. When I boot Debian GNU/Linux with Linux 2.6.37 or 2.6.38 I get every 10 seconds:

radeon 0000:01:05.0: HDMI-A-1: EDID block 0 invalid.
[drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID

This error message is spamming to tty1 (and because of my configuration to ttyS0 too). With radeon.modeset=0 set, I get rid of this messages by disabling KMS for this driver.
This behaviour is also described here: http://ubuntuforums.org/showthread.php?t=1607778

My board has no HDMI port btw. - I think the driver should either not search for the HDMI-A-1: EDID block 0 resp. a HDMI connected monitor while the board has no HDMI port at all or just probe for it once instead of every 10 seconds. I don't see any reason for probing every 10 seconds but I don't know if there is one.

I already reportet this on the LKML btw.

Regards,
Martin


-- Package-specific info:
** Version:
Linux version 2.6.38-2-amd64 (Debian 2.6.38-3) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-15) ) #1 SMP Thu Apr 7 04:28:07 UTC 2011

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.38-2-amd64 root=UUID=c491e50b-1626-4ab2-bb2f-9d9c795a0ea9 ro console=tty0 console=ttyS0,115200n8 drm_kms_helper.poll=0

** Not tainted

** Kernel log:
[    7.020103] input: PS/2 Logitech Mouse as /devices/platform/i8042/serio1/input/input4
[    7.029227] [drm:drm_edid_block_valid] *ERROR* Raw EDID:
[    7.034620] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.034623] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.034626] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.034628] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.034631] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.034633] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.034636] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.034639] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.034641] 
[    7.086413] [drm:drm_edid_block_valid] *ERROR* Raw EDID:
[    7.091835] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.091838] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.091840] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.091843] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.091845] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.091848] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.091850] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.091853] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.091855] 
[    7.142701] [drm:drm_edid_block_valid] *ERROR* Raw EDID:
[    7.148085] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.148088] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.148090] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.148093] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.148095] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.148098] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.148101] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.148103] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.148105] 
[    7.198952] [drm:drm_edid_block_valid] *ERROR* Raw EDID:
[    7.204332] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.204335] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.204337] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.204340] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.204343] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.204345] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.204348] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.204350] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[    7.204352] 
[    7.205893] radeon 0000:01:05.0: HDMI-A-1: EDID block 0 invalid.
[    7.211985] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[    7.224664] [drm] fb mappable at 0xFA040000
[    7.228916] [drm] vram apper at 0xFA000000
[    7.233062] [drm] size 2150400
[    7.236169] [drm] fb depth is 8
[    7.239361] [drm]    pitch is 1792
[    7.250869] Console: switching to colour frame buffer device 200x75
[    7.259926] fb0: radeondrmfb frame buffer device
[    7.264602] drm: registered panic notifier
[    7.268751] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:05.0 on minor 0
[    7.432983] EXT4-fs (sda2): re-mounted. Opts: (null)
[    7.474855] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,discard
[    7.506133] device-mapper: uevent: version 1.0.3
[    7.511004] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[    7.552684] loop: module loaded
[    8.663420] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
[    8.678647] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: usrquota,discard
[    8.713969] EXT3-fs: barriers not enabled
[    8.718188] kjournald starting.  Commit interval 5 seconds
[    8.723772] EXT3-fs (sdd1): using internal journal
[    8.728628] EXT3-fs (sdd1): mounted filesystem with ordered data mode
[    8.826022] ip_tables: (C) 2000-2006 Netfilter Core Team
[    8.851297] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    9.001858] fuse init (API version 7.16)
[    9.109312] RPC: Registered udp transport module.
[    9.114105] RPC: Registered tcp transport module.
[    9.118857] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    9.158793] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    9.186948] r8169 0000:03:00.0: eth0: link down
[    9.187077] svc: failed to register lockdv1 RPC service (errno 97).
[    9.187135] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[    9.187342] NFSD: starting 90-second grace period
[    9.210489] r8169 0000:03:00.0: eth0: link down
[    9.216580] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.555506] sshd (1507): /proc/1507/oom_adj is deprecated, please use /proc/1507/oom_score_adj instead.
[    9.578463] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2 cpu cores) (version 2.20.00)
[    9.578516] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x12
[    9.578519] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x14
[    9.578522] powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x16
[   12.597874] r8169 0000:03:00.0: eth0: link up
[   12.610517] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   22.832024] eth0: no IPv6 routers present
[  273.680818] Intel AES-NI instructions are not detected.
[  273.701504] padlock_aes: VIA PadLock not detected.
[  273.728378] padlock_sha: VIA PadLock Hash Engine not detected.
[  405.957356] Adding 16785868k swap on /dev/mapper/swap.  Priority:-1 extents:1 across:16785868k 
[  543.357385] EXT3-fs: barriers not enabled
[  543.377623] kjournald starting.  Commit interval 5 seconds
[  543.384191] EXT3-fs (dm-1): using internal journal
[  543.389099] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[  610.654570] EXT3-fs: barriers not enabled
[  610.675751] kjournald starting.  Commit interval 5 seconds
[  610.681562] EXT3-fs (dm-2): using internal journal
[  610.686469] EXT3-fs (dm-2): mounted filesystem with ordered data mode
[  663.977484] EXT3-fs: barriers not enabled
[  664.041755] kjournald starting.  Commit interval 5 seconds
[  664.048537] EXT3-fs (dm-3): using internal journal
[  664.053453] EXT3-fs (dm-3): mounted filesystem with ordered data mode

** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: Phoenix Technologies, LTD
bios_version: ASUS M2A-VM ACPI BIOS Revision 1705
board_vendor: ASUSTeK Computer INC.
board_name: M2A-VM
board_version: 1.XX    

** Loaded modules:
Module                  Size  Used by
sha256_generic         16797  8 
cryptd                 14463  0 
aes_x86_64             16796  32 
aes_generic            37122  1 aes_x86_64
powernow_k8            17321  1 
mperf                  12411  1 powernow_k8
cpufreq_stats          12713  0 
cpufreq_userspace      12576  0 
cpufreq_powersave      12454  0 
cpufreq_conservative    13878  0 
nfsd                  258505  11 
lockd                  70844  1 nfsd
nfs_acl                12511  1 nfsd
auth_rpcgss            36692  1 nfsd
sunrpc                162075  12 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs               12591  1 nfsd
fuse                   61520  3 
xt_tcpudp              12527  4 
nf_conntrack_ipv4      18081  2 
nf_defrag_ipv4         12483  1 nf_conntrack_ipv4
xt_state               12503  2 
nf_conntrack           55903  2 nf_conntrack_ipv4,xt_state
iptable_filter         12536  1 
ip_tables              21818  1 iptable_filter
x_tables               18839  4 xt_tcpudp,xt_state,iptable_filter,ip_tables
ext3                  112218  4 
jbd                    41698  1 ext3
cbc                    12747  16 
loop                   22515  0 
dm_crypt               22256  4 
dm_mod                 62467  9 dm_crypt
snd_hda_codec_realtek   283856  1 
snd_hda_intel          25946  0 
snd_hda_codec          67647  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              13148  1 snd_hda_codec
radeon                717227  1 
ttm                    52155  1 radeon
snd_pcm_oss            40662  0 
snd_mixer_oss          17905  1 snd_pcm_oss
drm_kms_helper         26893  1 radeon
drm                   165567  3 radeon,ttm,drm_kms_helper
snd_pcm                67327  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
i2c_algo_bit           12834  1 radeon
power_supply           13475  1 radeon
ftdi_sio               38182  0 
tpm_tis                13125  0 
snd_timer              22658  1 snd_pcm
tpm                    17726  1 tpm_tis
snd                    52280  8 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
tpm_bios               12903  1 tpm
i2c_piix4              12536  0 
edac_core              35344  0 
psmouse                55199  0 
soundcore              13014  1 snd
shpchp                 31221  0 
pcspkr                 12579  0 
usbserial              31986  1 ftdi_sio
serio_raw              12878  0 
evdev                  17475  3 
i2c_core               23725  5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_piix4
k8temp                 12531  0 
asus_atk0110           17276  0 
processor              27431  1 powernow_k8
edac_mce_amd           17103  0 
snd_page_alloc         12969  2 snd_hda_intel,snd_pcm
button                 12994  0 
pci_hotplug            26711  1 shpchp
ext4                  285166  3 
mbcache                12930  2 ext3,ext4
jbd2                   65157  1 ext4
crc16                  12343  1 ext4
sg                     25769  0 
sd_mod                 35501  13 
sr_mod                 21824  0 
cdrom                  35134  1 sr_mod
crc_t10dif             12348  1 sd_mod
ata_generic            12479  0 
ohci_hcd               26400  0 
sata_mv                27174  1 
ahci                   25089  7 
pata_atiixp            12689  0 
ehci_hcd               39529  0 
libahci                22568  1 ahci
libata                147240  5 ata_generic,sata_mv,ahci,pata_atiixp,libahci
fan                    12674  0 
usbcore               122908  5 ftdi_sio,usbserial,ohci_hcd,ehci_hcd
scsi_mod              161457  4 sg,sd_mod,sr_mod,libata
thermal                17330  0 
thermal_sys            17939  3 processor,fan,thermal
r8169                  37209  0 
mii                    12634  1 r8169
nls_base               12753  1 usbcore

** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910]
	Subsystem: ASUSTeK Computer Inc. Device [1043:826d]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 64

00:01.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) [1002:7912] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 99
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: fde00000-fdffffff
	Prefetchable memory behind bridge: 00000000fa000000-00000000fbffffff
	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:06.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2) [1002:7916] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fdc00000-fddfffff
	Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:07.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) [1002:7917] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: fd800000-fd8fffff
	Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0])
	Subsystem: ASUSTeK Computer Inc. Device [1043:8231]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin A routed to IRQ 22
	Region 0: I/O ports at ff00 [size=8]
	Region 1: I/O ports at fe00 [size=4]
	Region 2: I/O ports at fd00 [size=8]
	Region 3: I/O ports at fc00 [size=4]
	Region 4: I/O ports at fb00 [size=16]
	Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin D routed to IRQ 19
	Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Region 0: I/O ports at 0b00 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: piix4_smbus

00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at f900 [size=16]
	Kernel driver in use: pata_atiixp

00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
	Subsystem: ASUSTeK Computer Inc. Device [1043:8249]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin ? routed to IRQ 16
	Region 0: Memory at fe020000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel

00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
	Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
	I/O behind bridge: 0000b000-0000bfff
	Memory behind bridge: fda00000-fdafffff
	Prefetchable memory behind bridge: fd900000-fd9fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>
	Kernel driver in use: k8temp

01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS690 [Radeon X1200 Series] [1002:791e] (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device [1043:826d]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at fa000000 (64-bit, prefetchable) [size=32M]
	Region 2: Memory at fdff0000 (64-bit, non-prefetchable) [size=64K]
	Region 4: I/O ports at ce00 [size=256]
	Region 5: Memory at fde00000 (32-bit, non-prefetchable) [size=1M]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: radeon

02:00.0 SCSI storage controller [0100]: HighPoint Technologies, Inc. RocketRAID 230x 4 Port SATA-II Controller [1103:2300] (rev 02)
	Subsystem: Marvell Technology Group Ltd. Device [11ab:11ab]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at fdc00000 (64-bit, non-prefetchable) [size=1M]
	Region 2: I/O ports at ee00 [size=256]
	[virtual] Expansion ROM at fdd80000 [disabled] [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: sata_mv

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
	Subsystem: ASUSTeK Computer Inc. P5B [1043:81aa]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 42
	Region 0: I/O ports at de00 [size=256]
	Region 2: Memory at fd8ff000 (64-bit, non-prefetchable) [size=4K]
	Expansion ROM at fd8c0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: r8169


** USB devices:
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 6.0.1
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.38-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=de_DE (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.38-2-amd64 depends on:
ii  debconf [debconf-2.0]         1.5.36.1   Debian configuration management sy
ii  initramfs-tools [linux-initra 0.98.8     tools for generating an initramfs
ii  linux-base                    3.2        Linux image base package
ii  module-init-tools             3.12-1     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.38-2-amd64 recommends:
ii  firmware-linux-free           3          Binary firmware for various driver

Versions of packages linux-image-2.6.38-2-amd64 suggests:
ii  grub-pc                 1.98+20100804-14 GRand Unified Bootloader, version 
pn  linux-doc-2.6.38        <none>           (no description available)

Versions of packages linux-image-2.6.38-2-amd64 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
* linux-image-2.6.38-2-amd64/postinst/missing-firmware-2.6.38-2-amd64:
  linux-image-2.6.38-2-amd64/prerm/removing-running-kernel-2.6.38-2-amd64: true
  linux-image-2.6.38-2-amd64/postinst/ignoring-do-bootloader-2.6.38-2-amd64:
  linux-image-2.6.38-2-amd64/postinst/depmod-error-initrd-2.6.38-2-amd64: false

--- End Message ---

--- Begin Message ---

To: 624486-done@bugs.debian.org
Subject: Closing bugs assigned to linux-2.6 package
From: Ben Hutchings <benh@debian.org>
Date: Tue, 09 Feb 2016 15:25:42 +0000
Message-id: <E1aTAAg-0004ha-Kz@deadeye>

Version: 3.4.1-1~experimental.1+rm

Debian 6.0 Long Term Support is now ending, and the 'linux-2.6' source
package will no longer be updated.  This bug is being closed on the
assumption that it does not affect the kernel versions in newer Debian
releases.

If you can still reproduce this bug in a newer release, please reopen
the bug report and reassign it to 'src:linux' and the affected version
of the package.  You can find the package version for the running
kernel by running:

    uname -v

or the versions of all installed kernel packages by running:

    dpkg -l 'linux-image-[34]*' | grep ^.i

and looking at the third column.

I apologise that we weren't able to provide a specific resolution for
this bug.

Ben.

-- 
Ben Hutchings - Debian developer, member of Linux kernel and LTS teams

--- End Message ---

Reply to:

Prev by Date: Bug#622842: marked as done (firmware-brcm80211: not getting an associated point)
Next by Date: Bug#622993: marked as done (linux-image-2.6.38-2-amd64: every 10s I get "[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid ...")
Previous by thread: Bug#622842: marked as done (firmware-brcm80211: not getting an associated point)
Next by thread: Bug#622993: marked as done (linux-image-2.6.38-2-amd64: every 10s I get "[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid ...")
Index(es):
- Date
- Thread