[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#775023: marked as done (linux-image-3.2.0-4-amd64: Logitech Unifying receiver not recognized correctly)

Your message dated Sat, 10 Jan 2015 18:01:47 +0000
with message-id <1420912907.2327.15.camel@decadent.org.uk>
and subject line Re: Bug#775023: Please close bug
has caused the Debian Bug report #775023,
regarding linux-image-3.2.0-4-amd64: Logitech Unifying receiver not recognized correctly
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
775023: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=775023
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: src:linux
Version: 3.2.65-1
Severity: normal

Dear Maintainer,

after last update in wheezy to actual linux-image the detection does not work correctly for my logitech keyboard and mice 
wireless devices.

This behaviour looks like an old kernel issue for usb/hid logitech devices.

See: https://bugzilla.kernel.org/show_bug.cgi?id=60507

Just tried stable kernel-image and proposed-update kernel-image. Both do have this failure.

output of dmesg:

[   84.112035] usb 2-4: new full-speed USB device number 3 using ohci_hcd
[   84.334042] usb 2-4: New USB device found, idVendor=046d, idProduct=c52b
[   84.334050] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   84.334056] usb 2-4: Product: USB Receiver
[   84.334061] usb 2-4: Manufacturer: Logitech
[   84.644031] usb 2-7: new full-speed USB device number 4 using ohci_hcd
[   99.820075] usb 2-7: device descriptor read/64, error -110
[  114.452113] usbcore: registered new interface driver usbhid
[  114.452121] usbhid: USB HID core driver
[  114.469398] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-4/input2
[  114.475034] input: Logitech Unifying Device. Wireless PID:1024 as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.2/0003:046D:C52B.0003/input/input6
[  114.475390] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1024] on usb-0000:00:02.0-4:1
[  114.477649] input: Logitech Unifying Device. Wireless PID:2011 as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.2/0003:046D:C52B.0003/input/input7
[  114.478279] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2011] on usb-0000:00:02.0-4:2
[  115.100093] usb 2-7: device descriptor read/64, error -110
[  115.380039] usb 2-7: new full-speed USB device number 5 using ohci_hcd
[  130.556079] usb 2-7: device descriptor read/64, error -110
[  145.836044] usb 2-7: device descriptor read/64, error -110
[  146.116062] usb 2-7: new full-speed USB device number 6 using ohci_hcd
[  156.524043] usb 2-7: device not accepting address 6, error -110
[  156.700054] usb 2-7: new full-speed USB device number 7 using ohci_hcd
[  167.108064] usb 2-7: device not accepting address 7, error -110



-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.65-1

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=808992a4-a439-4c52-8f40-154f1d7fd66e ro security=apparmor quiet

** Tainted: PO (4097)
 * Proprietary module has been loaded.
 * Out-of-tree module has been loaded.

** Kernel log:
[   36.369810] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[   36.430612] loop: module loaded
[   36.509372] w83627ehf: Found W83627DHG chip at 0xa10
[   37.532643] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[   37.579641] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   39.254848] RPC: Registered named UNIX socket transport module.
[   39.254857] RPC: Registered udp transport module.
[   39.254862] RPC: Registered tcp transport module.
[   39.254866] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   39.306056] FS-Cache: Loaded
[   39.350924] FS-Cache: Netfs 'nfs' registered for caching
[   39.370318] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   40.076630] type=1400 audit(1420885863.932:2): apparmor="STATUS" operation="profile_load" name="gst_plugin_scanner" pid=2172 comm="apparmor_parser"
[   40.098670] type=1400 audit(1420885863.952:3): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=2173 comm="apparmor_parser"
[   40.105841] type=1400 audit(1420885863.960:4): apparmor="STATUS" operation="profile_load" name="/bin/ping" pid=2171 comm="apparmor_parser"
[   40.121339] type=1400 audit(1420885863.976:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=2175 comm="apparmor_parser"
[   40.121485] type=1400 audit(1420885863.976:6): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=2174 comm="apparmor_parser"
[   40.190001] type=1400 audit(1420885864.044:7): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=2177 comm="apparmor_parser"
[   40.194529] type=1400 audit(1420885864.048:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/chromium-browser/chromium-browser" pid=2176 comm="apparmor_parser"
[   40.200269] type=1400 audit(1420885864.056:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/chromium-browser/chromium-browser//browser_java" pid=2176 comm="apparmor_parser"
[   40.203878] type=1400 audit(1420885864.056:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/chromium-browser/chromium-browser//browser_openjdk" pid=2176 comm="apparmor_parser"
[   40.206072] type=1400 audit(1420885864.060:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=2177 comm="apparmor_parser"
[   41.203768] fuse init (API version 7.17)
[   41.558444] auditd (2510): /proc/2510/oom_adj is deprecated, please use /proc/2510/oom_score_adj instead.
[   43.087973] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input5
[   46.097465] Bluetooth: Core ver 2.16
[   46.097529] NET: Registered protocol family 31
[   46.097534] Bluetooth: HCI device and connection manager initialized
[   46.097544] Bluetooth: HCI socket layer initialized
[   46.097549] Bluetooth: L2CAP socket layer initialized
[   46.097562] Bluetooth: SCO socket layer initialized
[   46.287378] Bluetooth: RFCOMM TTY layer initialized
[   46.287392] Bluetooth: RFCOMM socket layer initialized
[   46.287398] Bluetooth: RFCOMM ver 1.11
[   46.446748] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   46.446757] Bluetooth: BNEP filters: protocol multicast
[   46.892073] usb 1-7: device descriptor read/64, error -110
[   47.342544] r8169 0000:04:00.0: eth0: link down
[   47.342562] r8169 0000:04:00.0: eth0: link down
[   47.343391] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   48.062502] lp0: using parport0 (interrupt-driven).
[   48.062709] lp1: using parport1 (interrupt-driven).
[   49.712140] r8169 0000:04:00.0: eth0: link up
[   49.712930] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   50.822011] r8169 0000:04:00.0: eth0: link down
[   50.859487] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   54.241982] r8169 0000:04:00.0: eth0: link up
[   54.242426] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   55.352215] r8169 0000:04:00.0: eth0: link down
[   59.694589] r8169 0000:04:00.0: eth0: link up
[   60.805224] r8169 0000:04:00.0: eth0: link down
[   62.108053] usb 1-7: device descriptor read/64, error -110
[   62.324052] usb 1-7: new high-speed USB device number 6 using ehci_hcd
[   64.129000] r8169 0000:04:00.0: eth0: link up
[   64.664049] eth0: no IPv6 routers present
[   64.878605] vboxdrv: Found 2 processor cores.
[   64.883501] vboxdrv: fAsync=1 offMin=0x50e5 offMax=0x50e5
[   64.883846] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[   64.883852] vboxdrv: Successfully loaded version 4.2.26 (interface 0x001a0007).
[   65.230576] r8169 0000:04:00.0: eth0: link down
[   65.285953] vboxpci: IOMMU not found (not registered)
[   69.802836] r8169 0000:04:00.0: eth0: link up
[   70.914279] r8169 0000:04:00.0: eth0: link down
[   72.732037] usb 1-7: device not accepting address 6, error -110
[   72.844039] usb 1-7: new high-speed USB device number 7 using ehci_hcd
[   73.474897] r8169 0000:04:00.0: eth0: link up
[   80.084592] sha1_ssse3: Neither AVX nor SSSE3 is available/usable.
[   80.752021] eth0: no IPv6 routers present
[   83.252035] usb 1-7: device not accepting address 7, error -110
[   83.252073] hub 1-0:1.0: unable to enumerate USB device on port 7
[   83.580033] usb 2-2: new full-speed USB device number 2 using ohci_hcd
[   83.805043] usb 2-2: New USB device found, idVendor=03f0, idProduct=2d11
[   83.805051] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   83.805057] usb 2-2: Product: OfficeJet 6100 Series
[   83.805062] usb 2-2: Manufacturer: Hewlett-Packard
[   83.805067] usb 2-2: SerialNumber: MY47SJ33W22R
[   84.112035] usb 2-4: new full-speed USB device number 3 using ohci_hcd
[   84.334042] usb 2-4: New USB device found, idVendor=046d, idProduct=c52b
[   84.334050] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   84.334056] usb 2-4: Product: USB Receiver
[   84.334061] usb 2-4: Manufacturer: Logitech
[   84.644031] usb 2-7: new full-speed USB device number 4 using ohci_hcd
[   99.820075] usb 2-7: device descriptor read/64, error -110
[  114.452113] usbcore: registered new interface driver usbhid
[  114.452121] usbhid: USB HID core driver
[  114.469398] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-4/input2
[  114.475034] input: Logitech Unifying Device. Wireless PID:1024 as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.2/0003:046D:C52B.0003/input/input6
[  114.475390] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1024] on usb-0000:00:02.0-4:1
[  114.477649] input: Logitech Unifying Device. Wireless PID:2011 as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.2/0003:046D:C52B.0003/input/input7
[  114.478279] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2011] on usb-0000:00:02.0-4:2
[  115.100093] usb 2-7: device descriptor read/64, error -110
[  115.380039] usb 2-7: new full-speed USB device number 5 using ohci_hcd
[  130.556079] usb 2-7: device descriptor read/64, error -110
[  132.711485] NFS: state manager failed on NFSv4 server sicherung with error 10016
[  145.836044] usb 2-7: device descriptor read/64, error -110
[  146.116062] usb 2-7: new full-speed USB device number 6 using ohci_hcd
[  156.524043] usb 2-7: device not accepting address 6, error -110
[  156.700054] usb 2-7: new full-speed USB device number 7 using ohci_hcd
[  167.108064] usb 2-7: device not accepting address 7, error -110
[  167.108102] hub 2-0:1.0: unable to enumerate USB device on port 7

** Model information
sys_vendor: MSI
product_name: MS-7369
product_version: 1.0
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: V2.9
board_vendor: MSI
board_name: MS-7369
board_version: 1.0

** Loaded modules:
joydev
hid_logitech_dj
usbhid
hid
sha1_generic
hmac
cryptd
aes_x86_64
aes_generic
cbc
cts
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
snd_hrtimer
cpufreq_conservative
cpufreq_userspace
cpufreq_powersave
cpufreq_stats
lp
bnep
rfcomm
bluetooth
rfkill
binfmt_misc
uinput
fuse
rpcsec_gss_krb5
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
w83627ehf
hwmon_vid
loop
amd64_edac_mod
snd_hda_codec_realtek
nvidia(P)
snd_hda_intel
snd_hda_codec
evdev
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
edac_mce_amd
edac_core
snd_seq_midi
snd_seq_midi_event
ppdev
psmouse
serio_raw
powernow_k8
mperf
k8temp
pcspkr
parport_serial
i2c_nforce2
i2c_core
processor
snd_rawmidi
button
snd_seq
snd_seq_device
snd_timer
snd
parport_pc
parport
shpchp
thermal_sys
soundcore
ext4
crc16
jbd2
mbcache
dm_mirror
dm_region_hash
dm_log
dm_mod
microcode
sg
sr_mod
cdrom
sd_mod
crc_t10dif
ata_generic
ohci_hcd
r8169
mii
ahci
libahci
ehci_hcd
libata
scsi_mod
usbcore
usb_common

** PCI devices:
00:00.0 RAM memory [0500]: NVIDIA Corporation MCP65 Memory Controller [10de:0444] (rev a3)
	Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7369]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP65 LPC Bridge [10de:0441] (rev a3)
	Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7369]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Region 0: I/O ports at 2f00 [size=256]

00:01.1 SMBus [0c05]: NVIDIA Corporation MCP65 SMBus [10de:0446] (rev a1)
	Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7369]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 14
	Region 0: I/O ports at 2900 [size=64]
	Region 4: I/O ports at 2d00 [size=64]
	Region 5: I/O ports at 2e00 [size=64]
	Capabilities: <access denied>
	Kernel driver in use: nForce2_smbus

00:01.2 RAM memory [0500]: NVIDIA Corporation MCP65 Memory Controller [10de:0445] (rev a1)
	Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7369]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:02.0 USB controller [0c03]: NVIDIA Corporation MCP65 USB 1.1 OHCI Controller [10de:0454] (rev a3) (prog-if 10 [OHCI])
	Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7369]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at f9eff000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci_hcd

00:02.1 USB controller [0c03]: NVIDIA Corporation MCP65 USB 2.0 EHCI Controller [10de:0455] (rev a3) (prog-if 20 [EHCI])
	Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7369]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 22
	Region 0: Memory at f9efec00 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:07.0 Audio device [0403]: NVIDIA Corporation MCP65 High Definition Audio [10de:044a] (rev a1)
	Subsystem: Device [0888:10ec]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (500ns min, 1250ns max)
	Interrupt: pin B routed to IRQ 20
	Region 0: Memory at f9ef8000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:08.0 PCI bridge [0604]: NVIDIA Corporation MCP65 PCI bridge [10de:0449] (rev a1) (prog-if 01 [Subtractive decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:0a.0 IDE interface [0101]: NVIDIA Corporation MCP65 SATA Controller [10de:045d] (rev a3) (prog-if 85 [Master SecO PriO])
	Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7369]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 45
	Region 0: I/O ports at b080 [size=8]
	Region 1: I/O ports at b000 [size=4]
	Region 2: I/O ports at ac00 [size=8]
	Region 3: I/O ports at a880 [size=4]
	Region 4: I/O ports at a800 [size=16]
	Region 5: Memory at f9efc000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:0b.0 PCI bridge [0604]: NVIDIA Corporation MCP65 PCI Express bridge [10de:045b] (rev a1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:0c.0 PCI bridge [0604]: NVIDIA Corporation MCP65 PCI Express bridge [10de:045a] (rev a1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: f9f00000-f9ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:0d.0 PCI bridge [0604]: NVIDIA Corporation MCP65 PCI Express bridge [10de:0458] (rev a1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fa000000-febfffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:0e.0 PCI bridge [0604]: NVIDIA Corporation MCP65 PCI Express bridge [10de:0459] (rev a1) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Kernel driver in use: amd64_edac

00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>
	Kernel driver in use: k8temp

02:00.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8111 PCI Express-to-PCI Bridge [10b5:8111] (rev 21) (prog-if 00 [Normal decode])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
	I/O behind bridge: 0000c000-0000cfff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

03:00.0 Communication controller [0780]: MosChip Semiconductor Technology Ltd. PCI 9835 Multi-I/O Controller [9710:9835] (rev 01)
	Subsystem: LSI Logic / Symbios Logic 1P2S [1000:0012]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 19
	Region 0: I/O ports at cc00 [size=8]
	Region 1: I/O ports at c880 [size=8]
	Region 2: I/O ports at c800 [size=8]
	Region 3: I/O ports at c480 [size=8]
	Region 4: I/O ports at c400 [size=8]
	Region 5: I/O ports at c080 [size=16]
	Kernel driver in use: parport_serial

04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 01)
	Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:369c]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 44
	Region 0: I/O ports at d800 [size=256]
	Region 2: Memory at f9fff000 (64-bit, non-prefetchable) [size=4K]
	Expansion ROM at f9fc0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: r8169

05:00.0 VGA compatible controller [0300]: NVIDIA Corporation G98 [GeForce 8400 GS Rev. 2] [10de:06e4] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:1162]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
	Region 5: I/O ports at ec00 [size=128]
	[virtual] Expansion ROM at febe0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: nvidia


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 03f0:2d11 Hewlett-Packard OfficeJet 6110
Bus 002 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver


-- System Information:
Debian Release: 7.7
  APT prefers stable
  APT policy: (990, 'stable'), (500, 'stable-updates'), (500, 'proposed-updates')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.49
ii  initramfs-tools [linux-initramfs-tool]  0.109.1
ii  kmod                                    9-3
ii  linux-base                              3.5
ii  module-init-tools                       9-3

Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii  firmware-linux-free  3.2

Versions of packages linux-image-3.2.0-4-amd64 suggests:
ii  debian-kernel-handbook  1.0.15
ii  grub-pc                 1.99-27+deb7u2
ii  linux-doc-3.2           3.2.63-2+deb7u2

Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
ii  firmware-linux          0.36+wheezy.1
ii  firmware-linux-nonfree  0.36+wheezy.1
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
ii  firmware-realtek        0.36+wheezy.1
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
  linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
  linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
  linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:

--- End Message ---
--- Begin Message --- 
Control: notfound -1 3.2.65-1

On Sat, 2015-01-10 at 18:04 +0100, Wolfgang Schnitker wrote:
> Dear Maintainer,
> 
> I just did a housecleaning in my box. Must be a USB misconnect due to dust.
[...]

Thanks for letting us know.

Ben.

-- 
Ben Hutchings
Everything should be made as simple as possible, but not simpler.
                                                           - Albert Einstein

Attachment: signature.asc
Description: This is a digitally signed message part


--- End Message ---
Reply to: