Bug#775023: linux-image-3.2.0-4-amd64: Logitech Unifying receiver not recognized correctly
Package: src:linux
Version: 3.2.65-1
Severity: normal
Dear Maintainer,
after last update in wheezy to actual linux-image the detection does not work correctly for my logitech keyboard and mice
wireless devices.
This behaviour looks like an old kernel issue for usb/hid logitech devices.
See: https://bugzilla.kernel.org/show_bug.cgi?id=60507
Just tried stable kernel-image and proposed-update kernel-image. Both do have this failure.
output of dmesg:
[ 84.112035] usb 2-4: new full-speed USB device number 3 using ohci_hcd
[ 84.334042] usb 2-4: New USB device found, idVendor=046d, idProduct=c52b
[ 84.334050] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 84.334056] usb 2-4: Product: USB Receiver
[ 84.334061] usb 2-4: Manufacturer: Logitech
[ 84.644031] usb 2-7: new full-speed USB device number 4 using ohci_hcd
[ 99.820075] usb 2-7: device descriptor read/64, error -110
[ 114.452113] usbcore: registered new interface driver usbhid
[ 114.452121] usbhid: USB HID core driver
[ 114.469398] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-4/input2
[ 114.475034] input: Logitech Unifying Device. Wireless PID:1024 as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.2/0003:046D:C52B.0003/input/input6
[ 114.475390] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1024] on usb-0000:00:02.0-4:1
[ 114.477649] input: Logitech Unifying Device. Wireless PID:2011 as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.2/0003:046D:C52B.0003/input/input7
[ 114.478279] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2011] on usb-0000:00:02.0-4:2
[ 115.100093] usb 2-7: device descriptor read/64, error -110
[ 115.380039] usb 2-7: new full-speed USB device number 5 using ohci_hcd
[ 130.556079] usb 2-7: device descriptor read/64, error -110
[ 145.836044] usb 2-7: device descriptor read/64, error -110
[ 146.116062] usb 2-7: new full-speed USB device number 6 using ohci_hcd
[ 156.524043] usb 2-7: device not accepting address 6, error -110
[ 156.700054] usb 2-7: new full-speed USB device number 7 using ohci_hcd
[ 167.108064] usb 2-7: device not accepting address 7, error -110
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.65-1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=808992a4-a439-4c52-8f40-154f1d7fd66e ro security=apparmor quiet
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[ 36.369810] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[ 36.430612] loop: module loaded
[ 36.509372] w83627ehf: Found W83627DHG chip at 0xa10
[ 37.532643] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 37.579641] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 39.254848] RPC: Registered named UNIX socket transport module.
[ 39.254857] RPC: Registered udp transport module.
[ 39.254862] RPC: Registered tcp transport module.
[ 39.254866] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 39.306056] FS-Cache: Loaded
[ 39.350924] FS-Cache: Netfs 'nfs' registered for caching
[ 39.370318] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 40.076630] type=1400 audit(1420885863.932:2): apparmor="STATUS" operation="profile_load" name="gst_plugin_scanner" pid=2172 comm="apparmor_parser"
[ 40.098670] type=1400 audit(1420885863.952:3): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=2173 comm="apparmor_parser"
[ 40.105841] type=1400 audit(1420885863.960:4): apparmor="STATUS" operation="profile_load" name="/bin/ping" pid=2171 comm="apparmor_parser"
[ 40.121339] type=1400 audit(1420885863.976:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=2175 comm="apparmor_parser"
[ 40.121485] type=1400 audit(1420885863.976:6): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=2174 comm="apparmor_parser"
[ 40.190001] type=1400 audit(1420885864.044:7): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=2177 comm="apparmor_parser"
[ 40.194529] type=1400 audit(1420885864.048:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/chromium-browser/chromium-browser" pid=2176 comm="apparmor_parser"
[ 40.200269] type=1400 audit(1420885864.056:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/chromium-browser/chromium-browser//browser_java" pid=2176 comm="apparmor_parser"
[ 40.203878] type=1400 audit(1420885864.056:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/chromium-browser/chromium-browser//browser_openjdk" pid=2176 comm="apparmor_parser"
[ 40.206072] type=1400 audit(1420885864.060:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=2177 comm="apparmor_parser"
[ 41.203768] fuse init (API version 7.17)
[ 41.558444] auditd (2510): /proc/2510/oom_adj is deprecated, please use /proc/2510/oom_score_adj instead.
[ 43.087973] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input5
[ 46.097465] Bluetooth: Core ver 2.16
[ 46.097529] NET: Registered protocol family 31
[ 46.097534] Bluetooth: HCI device and connection manager initialized
[ 46.097544] Bluetooth: HCI socket layer initialized
[ 46.097549] Bluetooth: L2CAP socket layer initialized
[ 46.097562] Bluetooth: SCO socket layer initialized
[ 46.287378] Bluetooth: RFCOMM TTY layer initialized
[ 46.287392] Bluetooth: RFCOMM socket layer initialized
[ 46.287398] Bluetooth: RFCOMM ver 1.11
[ 46.446748] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 46.446757] Bluetooth: BNEP filters: protocol multicast
[ 46.892073] usb 1-7: device descriptor read/64, error -110
[ 47.342544] r8169 0000:04:00.0: eth0: link down
[ 47.342562] r8169 0000:04:00.0: eth0: link down
[ 47.343391] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 48.062502] lp0: using parport0 (interrupt-driven).
[ 48.062709] lp1: using parport1 (interrupt-driven).
[ 49.712140] r8169 0000:04:00.0: eth0: link up
[ 49.712930] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 50.822011] r8169 0000:04:00.0: eth0: link down
[ 50.859487] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 54.241982] r8169 0000:04:00.0: eth0: link up
[ 54.242426] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 55.352215] r8169 0000:04:00.0: eth0: link down
[ 59.694589] r8169 0000:04:00.0: eth0: link up
[ 60.805224] r8169 0000:04:00.0: eth0: link down
[ 62.108053] usb 1-7: device descriptor read/64, error -110
[ 62.324052] usb 1-7: new high-speed USB device number 6 using ehci_hcd
[ 64.129000] r8169 0000:04:00.0: eth0: link up
[ 64.664049] eth0: no IPv6 routers present
[ 64.878605] vboxdrv: Found 2 processor cores.
[ 64.883501] vboxdrv: fAsync=1 offMin=0x50e5 offMax=0x50e5
[ 64.883846] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[ 64.883852] vboxdrv: Successfully loaded version 4.2.26 (interface 0x001a0007).
[ 65.230576] r8169 0000:04:00.0: eth0: link down
[ 65.285953] vboxpci: IOMMU not found (not registered)
[ 69.802836] r8169 0000:04:00.0: eth0: link up
[ 70.914279] r8169 0000:04:00.0: eth0: link down
[ 72.732037] usb 1-7: device not accepting address 6, error -110
[ 72.844039] usb 1-7: new high-speed USB device number 7 using ehci_hcd
[ 73.474897] r8169 0000:04:00.0: eth0: link up
[ 80.084592] sha1_ssse3: Neither AVX nor SSSE3 is available/usable.
[ 80.752021] eth0: no IPv6 routers present
[ 83.252035] usb 1-7: device not accepting address 7, error -110
[ 83.252073] hub 1-0:1.0: unable to enumerate USB device on port 7
[ 83.580033] usb 2-2: new full-speed USB device number 2 using ohci_hcd
[ 83.805043] usb 2-2: New USB device found, idVendor=03f0, idProduct=2d11
[ 83.805051] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 83.805057] usb 2-2: Product: OfficeJet 6100 Series
[ 83.805062] usb 2-2: Manufacturer: Hewlett-Packard
[ 83.805067] usb 2-2: SerialNumber: MY47SJ33W22R
[ 84.112035] usb 2-4: new full-speed USB device number 3 using ohci_hcd
[ 84.334042] usb 2-4: New USB device found, idVendor=046d, idProduct=c52b
[ 84.334050] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 84.334056] usb 2-4: Product: USB Receiver
[ 84.334061] usb 2-4: Manufacturer: Logitech
[ 84.644031] usb 2-7: new full-speed USB device number 4 using ohci_hcd
[ 99.820075] usb 2-7: device descriptor read/64, error -110
[ 114.452113] usbcore: registered new interface driver usbhid
[ 114.452121] usbhid: USB HID core driver
[ 114.469398] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-4/input2
[ 114.475034] input: Logitech Unifying Device. Wireless PID:1024 as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.2/0003:046D:C52B.0003/input/input6
[ 114.475390] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1024] on usb-0000:00:02.0-4:1
[ 114.477649] input: Logitech Unifying Device. Wireless PID:2011 as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.2/0003:046D:C52B.0003/input/input7
[ 114.478279] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2011] on usb-0000:00:02.0-4:2
[ 115.100093] usb 2-7: device descriptor read/64, error -110
[ 115.380039] usb 2-7: new full-speed USB device number 5 using ohci_hcd
[ 130.556079] usb 2-7: device descriptor read/64, error -110
[ 132.711485] NFS: state manager failed on NFSv4 server sicherung with error 10016
[ 145.836044] usb 2-7: device descriptor read/64, error -110
[ 146.116062] usb 2-7: new full-speed USB device number 6 using ohci_hcd
[ 156.524043] usb 2-7: device not accepting address 6, error -110
[ 156.700054] usb 2-7: new full-speed USB device number 7 using ohci_hcd
[ 167.108064] usb 2-7: device not accepting address 7, error -110
[ 167.108102] hub 2-0:1.0: unable to enumerate USB device on port 7
** Model information
sys_vendor: MSI
product_name: MS-7369
product_version: 1.0
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: V2.9
board_vendor: MSI
board_name: MS-7369
board_version: 1.0
** Loaded modules:
joydev
hid_logitech_dj
usbhid
hid
sha1_generic
hmac
cryptd
aes_x86_64
aes_generic
cbc
cts
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
snd_hrtimer
cpufreq_conservative
cpufreq_userspace
cpufreq_powersave
cpufreq_stats
lp
bnep
rfcomm
bluetooth
rfkill
binfmt_misc
uinput
fuse
rpcsec_gss_krb5
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
w83627ehf
hwmon_vid
loop
amd64_edac_mod
snd_hda_codec_realtek
nvidia(P)
snd_hda_intel
snd_hda_codec
evdev
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
edac_mce_amd
edac_core
snd_seq_midi
snd_seq_midi_event
ppdev
psmouse
serio_raw
powernow_k8
mperf
k8temp
pcspkr
parport_serial
i2c_nforce2
i2c_core
processor
snd_rawmidi
button
snd_seq
snd_seq_device
snd_timer
snd
parport_pc
parport
shpchp
thermal_sys
soundcore
ext4
crc16
jbd2
mbcache
dm_mirror
dm_region_hash
dm_log
dm_mod
microcode
sg
sr_mod
cdrom
sd_mod
crc_t10dif
ata_generic
ohci_hcd
r8169
mii
ahci
libahci
ehci_hcd
libata
scsi_mod
usbcore
usb_common
** PCI devices:
00:00.0 RAM memory [0500]: NVIDIA Corporation MCP65 Memory Controller [10de:0444] (rev a3)
Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7369]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP65 LPC Bridge [10de:0441] (rev a3)
Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7369]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: I/O ports at 2f00 [size=256]
00:01.1 SMBus [0c05]: NVIDIA Corporation MCP65 SMBus [10de:0446] (rev a1)
Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7369]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 14
Region 0: I/O ports at 2900 [size=64]
Region 4: I/O ports at 2d00 [size=64]
Region 5: I/O ports at 2e00 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
00:01.2 RAM memory [0500]: NVIDIA Corporation MCP65 Memory Controller [10de:0445] (rev a1)
Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7369]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:02.0 USB controller [0c03]: NVIDIA Corporation MCP65 USB 1.1 OHCI Controller [10de:0454] (rev a3) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7369]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f9eff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:02.1 USB controller [0c03]: NVIDIA Corporation MCP65 USB 2.0 EHCI Controller [10de:0455] (rev a3) (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7369]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at f9efec00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:07.0 Audio device [0403]: NVIDIA Corporation MCP65 High Definition Audio [10de:044a] (rev a1)
Subsystem: Device [0888:10ec]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 20
Region 0: Memory at f9ef8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:08.0 PCI bridge [0604]: NVIDIA Corporation MCP65 PCI bridge [10de:0449] (rev a1) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:0a.0 IDE interface [0101]: NVIDIA Corporation MCP65 SATA Controller [10de:045d] (rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7369]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 45
Region 0: I/O ports at b080 [size=8]
Region 1: I/O ports at b000 [size=4]
Region 2: I/O ports at ac00 [size=8]
Region 3: I/O ports at a880 [size=4]
Region 4: I/O ports at a800 [size=16]
Region 5: Memory at f9efc000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:0b.0 PCI bridge [0604]: NVIDIA Corporation MCP65 PCI Express bridge [10de:045b] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0c.0 PCI bridge [0604]: NVIDIA Corporation MCP65 PCI Express bridge [10de:045a] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f9f00000-f9ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0d.0 PCI bridge [0604]: NVIDIA Corporation MCP65 PCI Express bridge [10de:0458] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fa000000-febfffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0e.0 PCI bridge [0604]: NVIDIA Corporation MCP65 PCI Express bridge [10de:0459] (rev a1) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd64_edac
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
02:00.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8111 PCI Express-to-PCI Bridge [10b5:8111] (rev 21) (prog-if 00 [Normal decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
03:00.0 Communication controller [0780]: MosChip Semiconductor Technology Ltd. PCI 9835 Multi-I/O Controller [9710:9835] (rev 01)
Subsystem: LSI Logic / Symbios Logic 1P2S [1000:0012]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at cc00 [size=8]
Region 1: I/O ports at c880 [size=8]
Region 2: I/O ports at c800 [size=8]
Region 3: I/O ports at c480 [size=8]
Region 4: I/O ports at c400 [size=8]
Region 5: I/O ports at c080 [size=16]
Kernel driver in use: parport_serial
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 01)
Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:369c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: I/O ports at d800 [size=256]
Region 2: Memory at f9fff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at f9fc0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
05:00.0 VGA compatible controller [0300]: NVIDIA Corporation G98 [GeForce 8400 GS Rev. 2] [10de:06e4] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:1162]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at ec00 [size=128]
[virtual] Expansion ROM at febe0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 03f0:2d11 Hewlett-Packard OfficeJet 6110
Bus 002 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
-- System Information:
Debian Release: 7.7
APT prefers stable
APT policy: (990, 'stable'), (500, 'stable-updates'), (500, 'proposed-updates')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.2.0-4-amd64 suggests:
ii debian-kernel-handbook 1.0.15
ii grub-pc 1.99-27+deb7u2
ii linux-doc-3.2 3.2.63-2+deb7u2
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.36+wheezy.1
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.36+wheezy.1
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
Reply to: