Bug#808286: linux-image-4.3.0-1-amd64: IP assigned to interface in DOWN state is reachable.
Package: src:linux
Version: 4.3.3-1
Severity: normal
Dear Maintainer,
It looks like general problem with Linux kernel (tested on different versions with different
distributions - 2.x, 3.x, sometimes bug is present, sometimes not), but when I tested on
linux-image-4.2.0-1-amd64 4.2.6-3 (kernel from unstable) and was OK, and now on
linux-image-4.3.0-1-amd64 4.3.3-1 (current from unstable) bug returned.
This bug is also present in:
linux-image-3.16.0-4-amd64 3.16.7-ckt11-1+deb8u6 (Debian stable)
Steps to reproduce:
ip link add name eth0.3713 link eth0 type vlan id 3713
ip link set eth0.3713 up
ip a a 192.168.67.67/24 dev eth0.3713
fping 192.168.67.67
(is alive)
ip link set eth0.3713 down
fping 192.168.67.67
(is still alive!)
ip a output:
5: eth0.3713@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
link/ether 5c:f9:dd:40:d3:38 brd ff:ff:ff:ff:ff:ff
inet 192.168.67.67/24 scope global eth0.3713
valid_lft forever preferred_lft forever
I expect interface in DOWN state to be inactive (in any way), so IP assigned to this interface
should not be reachable.
Doesn't matter if iface is physical (eth1) or vlan-interface. But some people reported different results.
This check was made on Jessie with kernel from unstable, but also is present on full stable (with stable kernel,
as mentioned before).
Regards,
Paweł
-- Package-specific info:
** Version:
Linux version 4.3.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20151207 (Debian 5.3.1-3) ) #1 SMP Debian 4.3.3-1 (2015-12-15)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.3.0-1-amd64 root=UUID=8e32ea56-95cb-4eb0-9099-8a59ed3f1ce2 ro quiet
** Not tainted
** Kernel log:
[ 2.085956] [drm] Driver supports precise vblank timestamp query.
[ 2.086055] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.107573] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.107723] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[ 2.107906] [drm] Initialized i915 1.6.0 20150731 for 0000:00:02.0 on minor 0
[ 2.122710] iTCO_vendor_support: vendor-support=0
[ 2.124667] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 2.124720] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.124934] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.141794] fbcon: inteldrmfb (fb0) is primary device
[ 2.146651] cfg80211: World regulatory domain updated:
[ 2.146653] cfg80211: DFS Master region: unset
[ 2.146653] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2.146656] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2.146658] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2.146659] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 2.146661] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 2.146663] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 2.146664] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 2.146666] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 2.146667] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 2.240075] intel_rapl: Found RAPL domain package
[ 2.240076] intel_rapl: Found RAPL domain core
[ 2.240078] intel_rapl: Found RAPL domain uncore
[ 2.243522] ath9k 0000:01:00.0 wlan1: renamed from wlan0
[ 2.246140] input: Dell WMI hotkeys as /devices/virtual/input/input12
[ 2.255815] systemd-udevd[260]: renamed network interface wlan0 to wlan1
[ 2.503769] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A
[ 2.503807] [drm:cpt_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
[ 2.652201] clocksource: Switched to clocksource tsc
[ 2.925724] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7
[ 2.968486] usbcore: registered new interface driver rtsx_usb
[ 3.043187] Console: switching to colour frame buffer device 170x48
[ 3.078304] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.324768] Process accounting resumed
[ 3.385281] random: nonblocking pool is initialized
[ 3.417447] zram: Added device: zram0
[ 3.418846] zram: Added device: zram1
[ 3.421456] zram: Added device: zram2
[ 3.422368] zram0: detected capacity change from 0 to 1048576000
[ 3.423040] zram1: detected capacity change from 0 to 1048576000
[ 3.423736] zram2: detected capacity change from 0 to 1048576000
[ 3.951352] Adding 1023996k swap on /dev/zram0. Priority:60 extents:1 across:1023996k SSFS
[ 3.968390] Adding 1023996k swap on /dev/zram1. Priority:60 extents:1 across:1023996k SSFS
[ 3.972984] Adding 1023996k swap on /dev/zram2. Priority:60 extents:1 across:1023996k SSFS
[ 4.272508] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 10.029488] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.030331] alx 0000:02:00.0 eth0: NIC Up: 100 Mbps Full
[ 10.030557] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 11.727076] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.727081] Bluetooth: BNEP filters: protocol multicast
[ 11.727085] Bluetooth: BNEP socket layer initialized
[ 12.016686] Bluetooth: RFCOMM TTY layer initialized
[ 12.016694] Bluetooth: RFCOMM socket layer initialized
[ 12.016700] Bluetooth: RFCOMM ver 1.11
[ 12.169748] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 12.293045] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.293839] alx 0000:02:00.0 eth0: NIC Up: 100 Mbps Full
[ 12.294003] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 12.388954] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.389730] alx 0000:02:00.0 eth0: NIC Up: 100 Mbps Full
[ 12.389895] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 280.870949] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 294.857118] 8021q: 802.1Q VLAN Support v1.8
[ 6742.506147] perf interrupt took too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[12398.502149] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci
[16688.690402] device-mapper: uevent: version 1.0.3
[16688.690462] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[16689.936605] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[16689.940448] JFS: nTxBlock = 8192, nTxLock = 65536
[16689.952370] ntfs: driver 2.1.32 [Flags: R/W MODULE].
[16689.962689] QNX4 filesystem 0.2.3 registered.
[16690.588720] EXT4-fs (sda4): unable to read superblock
[16690.589912] EXT4-fs (sda4): unable to read superblock
[16690.591215] EXT4-fs (sda4): unable to read superblock
[16690.594911] XFS (sda4): Invalid superblock magic number
[16690.597326] FAT-fs (sda4): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[16690.597395] FAT-fs (sda4): bogus number of reserved sectors
[16690.597398] FAT-fs (sda4): Can't find a valid FAT filesystem
[16690.598644] FAT-fs (sda4): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[16690.598712] FAT-fs (sda4): bogus number of reserved sectors
[16690.598714] FAT-fs (sda4): Can't find a valid FAT filesystem
[16690.602375] MINIX-fs: unable to read superblock
[16690.605160] attempt to access beyond end of device
[16690.605165] sda4: rw=16, want=3, limit=2
[16690.605167] hfsplus: unable to find HFS+ superblock
[16690.606484] qnx4: no qnx4 filesystem (no root dir).
[16690.607673] ufs: You didn't specify the type of your ufs filesystem
mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...
>>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
[16690.608977] hfs: can't find a HFS filesystem on dev sda4
[25891.987881] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci
[31664.983390] alx 0000:02:00.0 eth0: Link Down
[31666.527966] alx 0000:02:00.0 eth0: NIC Up: 100 Mbps Full
[37612.524355] perf interrupt took too long (5005 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[77260.768985] Process accounting resumed
[81641.899219] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci
[91716.328383] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci
** Model information
sys_vendor: Dell Inc.
product_name: Vostro 3360
product_version:
chassis_vendor: Dell Inc.
chassis_version: 0.1
bios_vendor: Dell Inc.
bios_version: A04
board_vendor: Dell Inc.
board_name: 07X5MJ
board_version: FAB1
** Loaded modules:
nls_utf8
ufs
qnx4
hfsplus
hfs
minix
ntfs
vfat
msdos
fat
jfs
xfs
libcrc32c
dm_mod
cpuid
8021q
garp
mrp
stp
llc
iptable_filter
ip_tables
x_tables
rfcomm
bnep
binfmt_misc
zram
zsmalloc
lz4_compress
rtsx_usb_sdmmc
rtsx_usb_ms
mmc_core
memstick
rtsx_usb
joydev
dell_wmi
sparse_keymap
intel_rapl
iosf_mbi
x86_pkg_temp_thermal
intel_powerclamp
coretemp
kvm_intel
kvm
crct10dif_pclmul
crc32_pclmul
jitterentropy_rng
iTCO_wdt
iTCO_vendor_support
v4l2_common
sha256_ssse3
videodev
sha256_generic
dell_laptop
uinput
dcdbas
hmac
tun
nfsd
nfs_acl
dell_smm_hwmon
drbg
ansi_cprng
nfs
fscache
arc4
media
snd_hda_codec_hdmi
lockd
aesni_intel
grace
aes_x86_64
lrw
gf128mul
glue_helper
btusb
ablk_helper
ath9k
btrtl
cryptd
cdc_mbim
ath9k_common
btbcm
psmouse
snd_hda_codec_cirrus
ath9k_hw
i915
ath
btintel
serio_raw
mac80211
snd_hda_codec_generic
bluetooth
i2c_i801
cfg80211
snd_hda_intel
cdc_ncm
evdev
usbnet
auth_rpcgss
snd_hda_codec
cdc_wdm
mii
cdc_acm
lpc_ich
oid_registry
drm_kms_helper
rfkill
mfd_core
wmi
snd_hda_core
dell_smo8800
drm
snd_hwdep
sunrpc
snd_pcm
video
snd_timer
battery
cpufreq_stats
snd
i2c_algo_bit
cpufreq_userspace
mei_me
cpufreq_powersave
soundcore
cpufreq_conservative
ac
speedstep_lib
shpchp
mei
button
processor
ipmi_watchdog
ipmi_poweroff
ipmi_devintf
ipmi_msghandler
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
btrfs
xor
hid_generic
usbhid
hid
raid6_pq
sg
sd_mod
ahci
libahci
libata
scsi_mod
crc32c_intel
xhci_pci
ehci_pci
xhci_hcd
ehci_hcd
alx
mdio
usbcore
usb_common
thermal
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09)
Subsystem: Dell Device [1028:055c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: ivb_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:055c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 3000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Dell Device [1028:055c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 24
Region 0: Memory at d0600000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Dell Device [1028:055c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 26
Region 0: Memory at d0615000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:055c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d061a000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Dell Device [1028:055c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at d0610000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: d0500000-d05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 [8086:1e18] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d0400000-d04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:055c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d0619000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM77 Express Chipset LPC Controller [8086:1e57] (rev 04)
Subsystem: Dell Device [1028:055c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:055c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 25
Region 0: I/O ports at 3098 [size=8]
Region 1: I/O ports at 30bc [size=4]
Region 2: I/O ports at 3090 [size=8]
Region 3: I/O ports at 30b8 [size=4]
Region 4: I/O ports at 3060 [size=32]
Region 5: Memory at d0618000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
Subsystem: Dell Device [1028:055c]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 0
Region 0: Memory at d0614000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
01:00.0 Network controller [0280]: Qualcomm Atheros AR9462 Wireless Network Adapter [168c:0034] (rev 01)
Subsystem: Dell Device [1028:020a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0500000 (64-bit, non-prefetchable) [size=512K]
Expansion ROM at d0580000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
02:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8161 Gigabit Ethernet [1969:1091] (rev 10)
Subsystem: Dell Device [1028:055c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at d0400000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at 2000 [size=128]
Capabilities: <access denied>
Kernel driver in use: alx
** USB devices:
Bus 002 Device 003: ID 413c:818e Dell Computer Corp.
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 003: ID 138a:0011 Validity Sensors, Inc. VFS5011 Fingerprint Reader
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 062a:0000 Creative Labs Optical mouse
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 8.2
APT prefers stable
APT policy: (500, 'stable'), (200, 'unstable'), (190, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.3.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.3.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools [linux-initramfs-tool] 0.120
ii kmod 18-3
ii linux-base 3.5
Versions of packages linux-image-4.3.0-1-amd64 recommends:
ii firmware-linux-free 3.3
pn irqbalance <none>
Versions of packages linux-image-4.3.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-22+deb8u1
pn linux-doc-4.3 <none>
Versions of packages linux-image-4.3.0-1-amd64 is related to:
ii firmware-atheros 0.43
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 0.43
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-4.3.0-1-amd64/postinst/mips-initrd-4.3.0-1-amd64:
linux-image-4.3.0-1-amd64/postinst/depmod-error-initrd-4.3.0-1-amd64: false
linux-image-4.3.0-1-amd64/prerm/removing-running-kernel-4.3.0-1-amd64: true
Reply to: