Bug#690162: linux-image-3.2.0-4-amd64: logitech-djreceiver does not recognize K400 keyboard
Package: src:linux
Version: 3.2.65-1+deb7u2
Followup-For: Bug #690162
Dear Maintainer,
The logitech-djreceiver module does not recognize and disables my Logitech K400 wireless keyboard.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.65-1+deb7u2
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=07af437e-8f03-4d95-a499-c5ba36ea9110 ro quiet
** Not tainted
** Kernel log:
[ 1.601593] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.601595] sd 3:0:0:0: [sdd] 58626288 512-byte logical blocks: (30.0 GB/27.9 GiB)
[ 1.601629] sd 3:0:0:0: [sdd] Write Protect is off
[ 1.601631] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.601642] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.602453] sdd: sdd1 sdd2 < sdd5 sdd6 sdd7 sdd8 >
[ 1.602527] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.602561] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.602588] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.602619] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.602768] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 1.641443] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.641445] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.641603] hub 1-1:1.0: USB hub found
[ 1.641693] hub 1-1:1.0: 6 ports detected
[ 1.654085] sdc:
[ 1.654197] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.657113] sda:
[ 1.657203] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.659832] sdb:
[ 1.659927] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.725043] Refined TSC clocksource calibration: 3491.914 MHz.
[ 1.725046] Switching to clocksource tsc
[ 1.753012] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.889231] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.889233] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.889390] hub 2-1:1.0: USB hub found
[ 1.889483] hub 2-1:1.0: 6 ports detected
[ 2.056755] usb 3-6: new full-speed USB device number 2 using xhci_hcd
[ 2.075033] usb 3-6: New USB device found, idVendor=046d, idProduct=c52b
[ 2.075034] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.075035] usb 3-6: Product: USB Receiver
[ 2.075036] usb 3-6: Manufacturer: Logitech
[ 2.077222] usbcore: registered new interface driver usbhid
[ 2.077224] usbhid: USB HID core driver
[ 2.079753] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-6/input2
[ 2.079996] logitech-djreceiver 0003:046D:C52B.0003: logi_dj_probe:logi_dj_recv_query_paired_devices error:-32
[ 2.080115] logitech-djreceiver: probe of 0003:046D:C52B.0003 failed with error -32
[ 2.124592] PM: Starting manual resume from disk
[ 2.124594] PM: Hibernation image partition 8:53 present
[ 2.124595] PM: Looking for hibernation image.
[ 2.124782] PM: Image not found (code -22)
[ 2.124784] PM: Hibernation image not present or could not be loaded.
[ 2.130578] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.343810] udevd[390]: starting version 175
[ 2.377955] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 2.377962] ACPI: Power Button [PWRB]
[ 2.378008] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.378012] ACPI: Power Button [PWRF]
[ 2.378454] ACPI: Requesting acpi_cpufreq
[ 2.381359] Monitor-Mwait will be used to enter C-1 state
[ 2.381369] Monitor-Mwait will be used to enter C-2 state
[ 2.381378] ACPI: acpi_idle registered with cpuidle
[ 2.401342] iTCO_vendor_support: vendor-support=0
[ 2.402742] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 2.402812] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 2.404931] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 2.405059] ACPI: resource 0000:00:1f.3 [io 0xf040-0xf05f] conflicts with ACPI region SMBI [io 0xf040-0xf04f]
[ 2.405061] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.412489] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 2.425505] snd_hda_intel 0000:00:03.0: irq 43 for MSI/MSI-X
[ 2.425521] snd_hda_intel 0000:00:03.0: setting latency timer to 64
[ 2.430596] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 5.449888] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000
[ 6.453046] hda-intel: No response from codec, disabling MSI: last cmd=0x000f0000
[ 7.456174] hda-intel: Codec #0 probe error; disabling it...
[ 8.475307] hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x000f0001
[ 8.480116] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 8.480186] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 8.787237] Adding 3905532k swap on /dev/sdd5. Priority:-1 extents:1 across:3905532k SS
[ 8.790200] EXT4-fs (sdd1): re-mounted. Opts: (null)
[ 8.813448] EXT4-fs (sdd1): re-mounted. Opts: errors=remount-ro
[ 8.821096] loop: module loaded
[ 9.008365] EXT4-fs (sdd6): mounted filesystem with ordered data mode. Opts: (null)
[ 9.013279] EXT4-fs (sdd8): mounted filesystem with ordered data mode. Opts: (null)
[ 9.017178] EXT4-fs (sdd7): mounted filesystem with ordered data mode. Opts: (null)
[ 9.165300] RPC: Registered named UNIX socket transport module.
[ 9.165302] RPC: Registered udp transport module.
[ 9.165303] RPC: Registered tcp transport module.
[ 9.165303] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.168197] FS-Cache: Loaded
[ 9.172489] FS-Cache: Netfs 'nfs' registered for caching
[ 9.175269] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 9.474021] Bluetooth: Core ver 2.16
[ 9.474034] NET: Registered protocol family 31
[ 9.474035] Bluetooth: HCI device and connection manager initialized
[ 9.474037] Bluetooth: HCI socket layer initialized
[ 9.474038] Bluetooth: L2CAP socket layer initialized
[ 9.474041] Bluetooth: SCO socket layer initialized
[ 9.479476] Bluetooth: RFCOMM TTY layer initialized
[ 9.479479] Bluetooth: RFCOMM socket layer initialized
[ 9.479481] Bluetooth: RFCOMM ver 1.11
[ 9.498706] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 9.498709] Bluetooth: BNEP filters: protocol multicast
[ 9.634371] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
[ 9.738268] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
[ 9.738614] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.820782] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 12.821887] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 23.722355] eth0: no IPv6 routers present
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: B85N PHOENIX
product_version: To be filled by O.E.M.
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: F6
board_vendor: Gigabyte Technology Co., Ltd.
board_name: B85N PHOENIX-CF
board_version: x.x
** Loaded modules:
bnep
rfcomm
bluetooth
rfkill
binfmt_misc
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
snd_hda_codec_realtek
coretemp
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
aes_generic
cryptd
snd_hda_intel
evdev
snd_hda_codec
snd_hwdep
psmouse
snd_pcm
pcspkr
snd_page_alloc
snd_seq
serio_raw
snd_seq_device
snd_timer
i2c_i801
i2c_core
iTCO_wdt
snd
iTCO_vendor_support
acpi_cpufreq
mperf
soundcore
video
processor
button
ext4
crc16
jbd2
mbcache
hid_logitech_dj
usbhid
hid
sg
sd_mod
crc_t10dif
xhci_hcd
thermal
fan
thermal_sys
ahci
libahci
ehci_hcd
libata
scsi_mod
usbcore
usb_common
e1000e
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Haswell DRAM Controller [8086:0c00] (rev 06)
Subsystem: Giga-byte Technology Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:041e] (rev 06) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device [1458:d000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:03.0 Audio device [0403]: Intel Corporation Haswell HD Audio Controller [8086:0c0c] (rev 06)
Subsystem: Intel Corporation Device [8086:2010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7c34000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation Lynx Point USB xHCI Host Controller [8086:8c31] (rev 05) (prog-if 30 [XHCI])
Subsystem: Giga-byte Technology Device [1458:5007]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f7c20000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation Lynx Point MEI Controller #1 [8086:8c3a] (rev 04)
Subsystem: Giga-byte Technology Device [1458:1c3a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7c40000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:16.3 Serial controller [0700]: Intel Corporation Lynx Point KT Controller [8086:8c3d] (rev 04) (prog-if 02 [16550])
Subsystem: Giga-byte Technology Device [1458:1c3a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f0e0 [size=8]
Region 1: Memory at f7c3e000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection I217-V [8086:153b] (rev 05)
Subsystem: Giga-byte Technology Device [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f7c00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f7c3d000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation Lynx Point USB Enhanced Host Controller #2 [8086:8c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7c3c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation Lynx Point High Definition Audio Controller [8086:8c20] (rev 05)
Subsystem: Giga-byte Technology Device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f7c30000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1d.0 USB controller [0c03]: Intel Corporation Lynx Point USB Enhanced Host Controller #1 [8086:8c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7c3b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation Lynx Point LPC Controller [8086:8c50] (rev 05)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation Lynx Point 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology Device [1458:b005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 41
Region 0: I/O ports at f0d0 [size=8]
Region 1: I/O ports at f0c0 [size=4]
Region 2: I/O ports at f0b0 [size=8]
Region 3: I/O ports at f0a0 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7c3a000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation Lynx Point SMBus Controller [8086:8c22] (rev 05)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7c39000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 003 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
-- System Information:
Debian Release: 7.8
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-amd64 recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u2
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
Reply to: