[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#712984: marked as done (linux-image-3.9-1-amd64: Unable to find LVM volume system/root)



Your message dated Wed, 04 Mar 2015 21:19:26 +0000
with message-id <E1YTGhS-0004UD-2M@franck.debian.org>
and subject line Bug#678696: fixed in initramfs-tools 0.119
has caused the Debian Bug report #678696,
regarding linux-image-3.9-1-amd64: Unable to find LVM volume system/root
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
678696: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=678696
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 3.9.6-1
Severity: grave
Justification: renders package unusable

Hallo,

I am using Debian testing and today I got an update of the kernel from
3.2 to 3.9. I can't boot with the new kernel, I can however still boot
with the old (3.2) kernel becaus I didn't remove it.

I have multiple harddisks in my computer. On one of it, I have a normal
partition, formated with ext4 for /boot which I use for booting. The
other disk space is used for LVM as phisical disks in my volume group
"system". This volume group contains among others the logical volumes
"root" and "swap".
The kernel is started with the argument:
	root=/dev/mapper/system-root

This configuration (still) works with the 3.2 kernel. When I'm booting
the 3.9 kernel, I get the following messages:

	Booting kernel
	Loading, please wait...
		Volume group "system" not found
		Skipping volume group system
	Unable to find LVM volume system/root
	...
	Unable to find LVM volume system/swap

After a timeout, I get a busybox shell. The commands "lvm vgs" and
"lvm lvs" do show there the correct information. The directory
"/dev/mapper" shows however only the entry "control".

Can it be that a module isn't loaded? But how can then the LVM be found
in the busybox shell?

Regards,
Vincent Smeets

-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
sys_vendor: MSI
product_name: MS-7250
product_version: 1.0
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: MS-7250
bios_version: V1.11
board_vendor: MSI
board_name: MS-7250
board_version: 1.0

** PCI devices:
00:00.0 RAM memory [0500]: NVIDIA Corporation MCP55 Memory Controller [10de:0369] (rev a1)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7250]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP55 LPC Bridge [10de:0360] (rev a2)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7250]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: I/O ports at 2f00 [size=128]

00:01.1 SMBus [0c05]: NVIDIA Corporation MCP55 SMBus [10de:0368] (rev a2)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7250]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 2900 [size=64]
	Region 4: I/O ports at 2d00 [size=64]
	Region 5: I/O ports at 2e00 [size=64]
	Capabilities: <access denied>
	Kernel driver in use: nForce2_smbus

00:02.0 USB controller [0c03]: NVIDIA Corporation MCP55 USB Controller [10de:036c] (rev a1) (prog-if 10 [OHCI])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7250]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at fbefb000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci_hcd

00:02.1 USB controller [0c03]: NVIDIA Corporation MCP55 USB Controller [10de:036d] (rev a2) (prog-if 20 [EHCI])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7250]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 22
	Region 0: Memory at fbefac00 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:04.0 IDE interface [0101]: NVIDIA Corporation MCP55 IDE [10de:036e] (rev a1) (prog-if 8a [Master SecP PriP])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7250]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
	Region 4: I/O ports at ffa0 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: pata_amd

00:05.0 IDE interface [0101]: NVIDIA Corporation MCP55 SATA Controller [10de:037f] (rev a2) (prog-if 85 [Master SecO PriO])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7250]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 21
	Region 0: I/O ports at c480 [size=8]
	Region 1: I/O ports at c400 [size=4]
	Region 2: I/O ports at c080 [size=8]
	Region 3: I/O ports at c000 [size=4]
	Region 4: I/O ports at bc00 [size=16]
	Region 5: Memory at fbef9000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: sata_nv

00:05.1 IDE interface [0101]: NVIDIA Corporation MCP55 SATA Controller [10de:037f] (rev a2) (prog-if 85 [Master SecO PriO])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7250]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 23
	Region 0: I/O ports at b880 [size=8]
	Region 1: I/O ports at b800 [size=4]
	Region 2: I/O ports at b480 [size=8]
	Region 3: I/O ports at b400 [size=4]
	Region 4: I/O ports at b080 [size=16]
	Region 5: Memory at fbef8000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: sata_nv

00:05.2 IDE interface [0101]: NVIDIA Corporation MCP55 SATA Controller [10de:037f] (rev a2) (prog-if 85 [Master SecO PriO])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7250]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin C routed to IRQ 22
	Region 0: I/O ports at b000 [size=8]
	Region 1: I/O ports at ac00 [size=4]
	Region 2: I/O ports at a880 [size=8]
	Region 3: I/O ports at a800 [size=4]
	Region 4: I/O ports at a480 [size=16]
	Region 5: Memory at fbef7000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: sata_nv

00:06.0 PCI bridge [0604]: NVIDIA Corporation MCP55 PCI bridge [10de:0370] (rev a2) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: fbf00000-fbffffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR+
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:06.1 Audio device [0403]: NVIDIA Corporation MCP55 High Definition Audio [10de:0371] (rev a2)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7250]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (500ns min, 1250ns max)
	Interrupt: pin B routed to IRQ 21
	Region 0: Memory at fbef0000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:08.0 Bridge [0680]: NVIDIA Corporation MCP55 Ethernet [10de:0373] (rev a2)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7250]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 46
	Region 0: Memory at fbef6000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at a400 [size=8]
	Region 2: Memory at fbefa800 (32-bit, non-prefetchable) [size=256]
	Region 3: Memory at fbefa400 (32-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: forcedeth

00:09.0 Bridge [0680]: NVIDIA Corporation MCP55 Ethernet [10de:0373] (rev a2)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7250]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at fbef5000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at a080 [size=8]
	Region 2: Memory at fbefa000 (32-bit, non-prefetchable) [size=256]
	Region 3: Memory at fbef4c00 (32-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: forcedeth

00:0a.0 PCI bridge [0604]: NVIDIA Corporation MCP55 PCI Express bridge [10de:0376] (rev a2) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:0b.0 PCI bridge [0604]: NVIDIA Corporation MCP55 PCI Express bridge [10de:0374] (rev a2) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:0c.0 PCI bridge [0604]: NVIDIA Corporation MCP55 PCI Express bridge [10de:0374] (rev a2) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:0d.0 PCI bridge [0604]: NVIDIA Corporation MCP55 PCI Express bridge [10de:0378] (rev a2) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:0e.0 PCI bridge [0604]: NVIDIA Corporation MCP55 PCI Express bridge [10de:0375] (rev a2) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:0f.0 PCI bridge [0604]: NVIDIA Corporation MCP55 PCI Express bridge [10de:0377] (rev a2) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fc000000-febfffff
	Prefetchable memory behind bridge: 00000000c4000000-00000000cfffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>
	Kernel driver in use: k8temp

01:00.0 Serial controller [0700]: Timedia Technology Co Ltd PCI2S550 (Dual 16550 UART) [1409:7168] (rev 01) (prog-if 02 [16550])
	Subsystem: Timedia Technology Co Ltd SER4036A3V (2x RS232 port) [1409:0002]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 19
	Region 0: I/O ports at dc00 [size=32]
	Kernel driver in use: serial

01:04.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev 80) (prog-if 10 [OHCI])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:250d]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (8000ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at fbfff800 (32-bit, non-prefetchable) [size=2K]
	Region 1: I/O ports at d880 [size=128]
	Capabilities: <access denied>
	Kernel driver in use: firewire_ohci

07:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF116 [GeForce GTX 550 Ti] [10de:1244] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: Point of View BV Device [1acc:5515]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=32M]
	Region 1: Memory at c8000000 (64-bit, prefetchable) [size=128M]
	Region 3: Memory at c4000000 (64-bit, prefetchable) [size=64M]
	Region 5: I/O ports at ec00 [size=128]
	[virtual] Expansion ROM at feb80000 [disabled] [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: nvidia

07:00.1 Audio device [0403]: NVIDIA Corporation GF116 High Definition Audio Controller [10de:0bee] (rev a1)
	Subsystem: Point of View BV Device [1acc:5515]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at feb7c000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
Bus 002 Device 003: ID 045e:00dd Microsoft Corp. Comfort Curve Keyboard 2000 V1.0


-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=nl_NL.UTF-8, LC_CTYPE=nl_NL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.9-1-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.50
ii  initramfs-tools [linux-initramfs-tool]  0.112
ii  kmod                                    9-3
ii  linux-base                              3.5
ii  module-init-tools                       9-3

Versions of packages linux-image-3.9-1-amd64 recommends:
ii  firmware-linux-free  3.2

Versions of packages linux-image-3.9-1-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 1.99-27+deb7u1
pn  linux-doc-3.9           <none>

Versions of packages linux-image-3.9-1-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.9-1-amd64/postinst/ignoring-ramdisk:
  linux-image-3.9-1-amd64/postinst/missing-firmware-3.9-1-amd64:
  linux-image-3.9-1-amd64/prerm/removing-running-kernel-3.9-1-amd64: true
  linux-image-3.9-1-amd64/postinst/depmod-error-initrd-3.9-1-amd64: false

--- End Message ---
--- Begin Message ---
Source: initramfs-tools
Source-Version: 0.119

We believe that the bug you reported is fixed in the latest version of
initramfs-tools, which is due to be installed in the Debian FTP archive.

A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 678696@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Ben Hutchings <ben@decadent.org.uk> (supplier of updated initramfs-tools package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@ftp-master.debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Format: 1.8
Date: Sun, 01 Mar 2015 23:58:49 +0000
Source: initramfs-tools
Binary: initramfs-tools
Architecture: all source
Version: 0.119
Distribution: unstable
Urgency: medium
Maintainer: Debian kernel team <debian-kernel@lists.debian.org>
Changed-By: Ben Hutchings <ben@decadent.org.uk>
Closes: 627547 678696 688794 697335 707583 744836 752789 759552 762042 762768 762984 764020 764022 764388 765614 766448 771301 773250
Description: 
 initramfs-tools - generic modular initramfs generator
Changes:
 initramfs-tools (0.119) unstable; urgency=medium
 .
   The "Wait smarter not harder" release
 .
   [ Ben Hutchings ]
   * [bf238f6] Always generate ORDER files in mkinitramfs (Closes: #688794)
   * [8529550] Move get_source, set_initlist, get_prereq_pairs, call_scripts to
     hook-functions
   * [6ba2e93] hook-functions: Add modules for various important device types
     (Closes: #762042)
   * [9c8bde8] mkinitramfs.8: Update default temporary directory
     (Closes: #764388)
   * [1bd461e] initramfs-tools.8: Refer to lsinitramfs rather than suggesting
     gunzip | cpio (Closes: #764022)
   * [64d39d0] Add comment to /usr/share/initramfs-tools/modules that it is not
     a config file (Closes: #752789)
   * [4f1414b] initramfs-tools.8: Improve documentation of break parameter.
     Thanks to Helmut Grohne <helmut@subdivi.de> (Closes: #707583)
   * [a5fbfb8] update-initramfs: Fix error message in case of excess arguments
     (Closes: #627547)
   * [738678f] initramfs.conf.5: Update configuration directory (Closes: #759552)
   * [3862d9b] update-initramfs: Consistently show which options take arguments
     (Closes: #762768)
   * [35bdb74] Refer to lsinitramfs(8) from {initramfs-tools,mkinitramfs,
     update-initramfs}(8) (Closes: #764020)
   * [cf9691d] mkinitramfs: Use default xz compression level rather than -8
     (Closes: #697335)
   * [10ebca7] mkinitramfs: Improve warning text when missing modules.
     Thanks to Trent W. Buck <trentbuck@gmail.com> (Closes: #744836)
   * [540dcb6] initramfs-tools.8: Refer to 'phase' rather than 'stage' of
     initramfs execution
   * [c7a3b31] initramfs-tools.8: Briefly document the kernel hooks
   * [274f945] hooks/fsck: Remove dependency on hwclock by disabling e2fsck time
     check
   * [1780a66] checkfs: Continue unless fsck reports uncorrectable errors
     (Closes: #765614)
   * [e5526cd] checkfs: Correct error messages and emergency shell in case of
     failure
   * [9daea18] hooks/fsck: Fix type lookup for mount by UUID or label with
     type=auto (Closes: #766448)
   * [2b1d834] dep_add_modules: Add modules needed for /usr device
   * [a164229] NEWS: Begin a NEWS entry for the fsck and /usr-mount changes
   * [2bbe817] NEWS: Document the possible need to update mdadm INITRDSTART
     (Closes: #771301)
   * [884a518] control: Ensure cryptsetup is upgraded to support mounting /usr
   * [7b4635c] Allow passing arguments to hooks and scripts
   * [2e2f753] local: Call local-block boot scripts to prepare additional block
     devices
   * [3a1db85] control: Add versioned Breaks on lvm2 without a local-block boot
     script (Closes: #762984)
   * [d4e5601] local: Invoke local-block scripts from the loop in
     local_device_setup (Closes: #678696)
   * [8402332] local: Use max(30, rootdelay) as timeout for block device to
     appear
   * [adfa0f6] NEWS: Add an entry about e2fsck behaviour with RTC set to local
     time
 .
   [ Bastian Blank ]
   * [9bc3a78] hook-functions: Add xhci-pci to module list (Closes: #773250)
Checksums-Sha1: 
 01602f05882a14e119bcd3450a1c44e73ea0e29c 1709 initramfs-tools_0.119.dsc
 ea3094b9b105532768c869513ce9e0838bbf2c27 80016 initramfs-tools_0.119.tar.xz
 c67f8ea782560493272d38ba68718c0ff7eb8512 95294 initramfs-tools_0.119_all.deb
Checksums-Sha256: 
 8e4fad86d563dde610e81f7976ec811aef6ab0762dde4f8e6e0ad9f11ca0b3fe 1709 initramfs-tools_0.119.dsc
 80624cf26b0c52da40d4888dffc1140a030849e16536808d6a83a5d21e66166a 80016 initramfs-tools_0.119.tar.xz
 6b781a29249616a4e6fe369fe9cc57e8d9e5f8b82d8007c9e81d52f047d780ed 95294 initramfs-tools_0.119_all.deb
Files: 
 d7e311ee5dada18ec57fe60b4a19ed3c 1709 utils optional initramfs-tools_0.119.dsc
 0fd19c5c9581b799e76e08af366f9976 80016 utils optional initramfs-tools_0.119.tar.xz
 071a6cf6d93386b171dbea89b3060d62 95294 utils optional initramfs-tools_0.119_all.deb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
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=kxdX
-----END PGP SIGNATURE-----

--- End Message ---

Reply to: