Bug#745089: linux-image-3.13-1-686-pae: kernel block java (both open and oracle java)
Package: src:linux
Version: 3.13.7-1
Severity: normal
Dear Maintainer,
After java 7.51 release, java ins't work with kernels up to 3.10.x. java 7.51
and 7.55 only work with kernel version 3.2.0-4 (and, my be, below).
There is a big thread (in Portuguese) about this bug [1].
Debian kernels versions 3.10.x, 3.11.x, 3.12.x e 3.13.x java 7.51 and 7.55
(oracle and openjdk) not work.
Kernels 3.12.6 and 3.12.9 compiled from kernel.org work very well.
Here is a diff from debian kernel and kernel.org version:
-# Linux/i386 3.12.6 Kernel Configuration
+# Linux/x86 3.12.6 Kernel Configuration
+CONFIG_MEMCG_DISABLED=y
+CONFIG_MICROCODE_XEN=y
-CONFIG_BMP085=y
+CONFIG_BMP085=m
-CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_AUFS_FS=m
+CONFIG_AUFS_BRANCH_MAX_127=y
+CONFIG_AUFS_SBILIST=y
+CONFIG_AUFS_EXPORT=y
+CONFIG_AUFS_BR_HFSPLUS=y
+CONFIG_AUFS_BDEV_LOOP=y
+CONFIG_MAGIC_SYSRQ_DEFAULT_MASK=0x01b6
I have collected this info from that thread. Thanks to Junior Polegato and
others brazilian debian guys.
1. https://lists.debian.org/debian-user-portuguese/2014/01/msg00118.html
-- Package-specific info:
** Version:
Linux version 3.13-1-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-16) ) #1 SMP Debian 3.13.7-1 (2014-03-25)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.13-1-686-pae root=UUID=e9b159ef-cf9a-490b-8c19-6dc6d63439c4 ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 18.745509] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 18.745543] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 18.745636] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 18.907117] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 18.909165] excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[ 18.909182] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[ 18.909993] excluding 0x3f0-0x3ff 0x4d0-0x4d7
[ 18.910006] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[ 18.910691] clean.
[ 18.910703] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[ 18.911272] excluding 0xc80-0xcbf
[ 18.911288] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 18.911307] excluding 0xc0000-0xcffff 0xe0000-0xfffff
[ 18.911320] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 18.911340] excluding 0xa0000000-0xa0ffffff
[ 18.911353] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 18.911372] excluding 0x60000000-0x60ffffff
[ 18.911385] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 18.912347] clean.
[ 19.263328] input: Dell WMI hotkeys as /devices/virtual/input/input12
[ 19.282170] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 19.550318] Console: switching to colour frame buffer device 160x50
[ 19.554537] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 19.554539] i915 0000:00:02.0: registered panic notifier
[ 19.555423] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 19.555696] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input14
[ 19.555765] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 19.555790] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 19.623911] media: Linux media interface: v0.10
[ 19.848600] Linux video capture interface: v2.00
[ 20.011023] uvcvideo: Found UVC 1.00 device USB2.0 Camera (1871:0101)
[ 20.012513] input: USB2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb7/7-4/7-4.4/7-4.4:1.0/input/input16
[ 20.012644] usbcore: registered new interface driver uvcvideo
[ 20.012646] USB Video Class driver (1.1.1)
[ 20.604199] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input15
[ 20.625429] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input13
[ 24.766232] Adding 3905532k swap on /dev/sda5. Priority:-1 extents:1 across:3905532k
[ 24.786475] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 25.038982] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 25.745137] lp: driver loaded but no devices found
[ 25.770615] ppdev: user-space parallel port driver
[ 25.943570] loop: module loaded
[ 26.062713] fuse init (API version 7.22)
[ 26.155022] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 27.427315] RPC: Registered named UNIX socket transport module.
[ 27.427318] RPC: Registered udp transport module.
[ 27.427319] RPC: Registered tcp transport module.
[ 27.427321] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 27.466132] FS-Cache: Loaded
[ 27.508384] FS-Cache: Netfs 'nfs' registered for caching
[ 27.568023] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 29.321571] vboxdrv: Found 2 processor cores.
[ 29.321855] vboxdrv: fAsync=0 offMin=0x4af offMax=0xc4a
[ 29.321924] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 29.321926] vboxdrv: Successfully loaded version 4.3.10_Debian (interface 0x001a0007).
[ 29.683867] vboxpci: IOMMU not found (not compiled)
[ 30.042698] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input17
[ 36.978628] systemd-logind[3143]: New seat seat0.
[ 37.002492] systemd-logind[3143]: Watching system buttons on /dev/input/event12 (Video Bus)
[ 37.002569] systemd-logind[3143]: Watching system buttons on /dev/input/event5 (Power Button)
[ 37.002638] systemd-logind[3143]: Watching system buttons on /dev/input/event4 (Lid Switch)
[ 37.002710] systemd-logind[3143]: Watching system buttons on /dev/input/event6 (Sleep Button)
[ 37.126085] iwl3945 0000:0c:00.0: firmware: direct-loading firmware iwlwifi-3945-2.ucode
[ 37.126098] iwl3945 0000:0c:00.0: loaded firmware version 15.32.2.9
[ 37.194051] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 37.226770] tg3 0000:09:00.0: irq 46 for MSI/MSI-X
[ 37.261868] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 44.030702] apm: BIOS not found.
[ 44.132231] Bluetooth: Core ver 2.17
[ 44.132252] NET: Registered protocol family 31
[ 44.132254] Bluetooth: HCI device and connection manager initialized
[ 44.132264] Bluetooth: HCI socket layer initialized
[ 44.132267] Bluetooth: L2CAP socket layer initialized
[ 44.132272] Bluetooth: SCO socket layer initialized
[ 44.162690] Bluetooth: RFCOMM TTY layer initialized
[ 44.162702] Bluetooth: RFCOMM socket layer initialized
[ 44.162707] Bluetooth: RFCOMM ver 1.11
[ 44.281289] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 44.281293] Bluetooth: BNEP filters: protocol multicast
[ 44.281302] Bluetooth: BNEP socket layer initialized
[ 44.504745] wlan0: authenticate with f8:1a:67:7e:13:26
[ 44.509828] wlan0: send auth to f8:1a:67:7e:13:26 (try 1/3)
[ 44.512134] wlan0: authenticated
[ 44.516056] wlan0: associate with f8:1a:67:7e:13:26 (try 1/3)
[ 44.518761] wlan0: RX AssocResp from f8:1a:67:7e:13:26 (capab=0x421 status=0 aid=2)
[ 44.520180] wlan0: associated
[ 44.520199] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 47.056782] systemd-logind[3143]: New session 1 of user Debian-gdm.
[ 47.056875] systemd-logind[3143]: Linked /tmp/.X11-unix/X0 to /run/user/108/X11-display.
[ 55.152108] Ebtables v2.0 registered
[ 55.432764] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 55.651419] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 123.394323] systemd-logind[3143]: New session 2 of user marcelo.
[ 123.394413] systemd-logind[3143]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
[ 145.934323] ISO 9660 Extensions: IEEE_1282
[ 498.341105] perf samples too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 1142.232740] nautilus[6688]: segfault at 10037 ip b653a0f9 sp bf94a900 error 4 in libsqlite3.so.0.8.6[b64ff000+bb000]
[ 1144.889889] nautilus[6802]: segfault at 10037 ip b660d0f9 sp bfda1bd0 error 4 in libsqlite3.so.0.8.6[b65d2000+bb000]
[ 1145.655231] nautilus[6812]: segfault at 10037 ip b659b0f9 sp bfa58520 error 4 in libsqlite3.so.0.8.6[b6560000+bb000]
[ 2128.923724] perf samples too long (5011 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
** Model information
not available
** Loaded modules:
isofs
ecb
ip6table_filter
ip6_tables
iptable_filter
ip_tables
ebtable_nat
ebtables
x_tables
cpufreq_stats
cpufreq_userspace
cpufreq_conservative
cpufreq_powersave
bnep
rfcomm
bluetooth
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
binfmt_misc
uinput
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
fuse
ecryptfs
loop
firewire_sbp2
parport_pc
ppdev
lp
parport
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
videodev
media
joydev
psmouse
arc4
dell_wmi
sparse_keymap
iTCO_wdt
iTCO_vendor_support
dell_laptop
dcdbas
coretemp
kvm_intel
kvm
serio_raw
pcspkr
i915
drm_kms_helper
evdev
snd_hda_codec_idt
snd_hda_intel
drm
i2c_i801
snd_hda_codec
iwl3945
snd_hwdep
i2c_algo_bit
iwlegacy
pcmcia
i2c_core
snd_pcm
mac80211
snd_page_alloc
yenta_socket
pcmcia_rsrc
snd_seq
snd_seq_device
snd_timer
snd
cfg80211
pcmcia_core
rfkill
soundcore
acpi_cpufreq
lpc_ich
wmi
mfd_core
button
battery
ac
video
processor
ext4
crc16
mbcache
jbd2
dm_mod
hid_generic
usbhid
hid
sd_mod
crc_t10dif
crct10dif_common
sg
sr_mod
cdrom
ata_generic
firewire_ohci
ata_piix
firewire_core
crc_itu_t
thermal
libata
scsi_mod
thermal_sys
ehci_pci
uhci_hcd
ehci_hcd
tg3
ptp
pps_core
libphy
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
Subsystem: Dell Device [1028:01f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 0c) (prog-if 00 [VGA controller])
Subsystem: Dell Latitude D630 [1028:01f9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at efe8 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 0c)
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f20 [size=32]
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f00 [size=32]
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
Subsystem: Dell Dell Latitude D630 [1028:01f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f4000000-f41fffff
Prefetchable memory behind bridge: 00000000f4200000-00000000f43fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: fe800000-fe8fffff
Prefetchable memory behind bridge: 00000000f4400000-00000000f45fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 [8086:2849] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fe700000-fe7fffff
Prefetchable memory behind bridge: 00000000f4600000-00000000f47fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f80 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f60 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6f40 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=07, sec-latency=32
I/O behind bridge: 00005000-00005fff
Memory behind bridge: fe600000-fe6fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f3ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 02)
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 6fa0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode] [8086:2828] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 6eb0 [size=8]
Region 1: I/O ports at 6eb8 [size=4]
Region 2: I/O ports at 6ec0 [size=8]
Region 3: I/O ports at 6ec8 [size=4]
Region 4: I/O ports at 6ee0 [size=16]
Region 5: I/O ports at eff0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe9fbf00 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 10c0 [size=32]
Kernel driver in use: i801_smbus
03:01.0 CardBus bridge [0607]: O2 Micro, Inc. Cardbus bridge [1217:7135] (rev 21)
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
Memory window 0: f0000000-f3ffffff (prefetchable)
Memory window 1: f4c00000-f4ffffff
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Capabilities: <access denied>
Kernel driver in use: yenta_cardbus
03:01.4 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Firewire (IEEE 1394) [1217:00f7] (rev 02) (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fe6ff000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at fe6fe800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express [14e4:1673] (rev 02)
Subsystem: Dell Device [1028:01f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at fe7f0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
Subsystem: Intel Corporation Device [8086:1021]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at fe8ff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945
** USB devices:
Bus 007 Device 006: ID 1871:0101 Aveo Technology Corp. UVC camera (Bresser microscope)
Bus 007 Device 005: ID 1a2c:0021 China Resource Semico Co., Ltd Keyboard
Bus 007 Device 004: ID 15d9:0a4f Trust International B.V.
Bus 007 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 004: ID 0b97:7772 O2 Micro, Inc. OZ776 CCID Smartcard Reader
Bus 005 Device 003: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (900, 'testing'), (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 3.13-1-686-pae (SMP w/2 CPU cores)
Locale: LANG=pt_BR.utf8, LC_CTYPE=pt_BR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.13-1-686-pae depends on:
ii debconf [debconf-2.0] 1.5.52
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 16-2
ii linux-base 3.5
ii module-init-tools 16-2
Versions of packages linux-image-3.13-1-686-pae recommends:
ii firmware-linux-free 3.3
ii libc6-i686 2.18-4
Versions of packages linux-image-3.13-1-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-22
pn linux-doc-3.13 <none>
Versions of packages linux-image-3.13-1-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.41
pn firmware-libertas <none>
ii firmware-linux 0.41
ii firmware-linux-nonfree 0.41
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.13-1-686-pae/prerm/removing-running-kernel-3.13-1-686-pae: true
linux-image-3.13-1-686-pae/postinst/depmod-error-initrd-3.13-1-686-pae: false
Reply to: