Your message dated Thu, 02 Jan 2014 00:17:02 +0000 with message-id <1388621822.22017.1.camel@deadeye.wl.decadent.org.uk> and subject line Re: Bug#697019: Bug is fixed: at least for stable debian 7 kernel SMP Debian 3.2.51-1 x86_64 has caused the Debian Bug report #697019, regarding linux-image-3.2.0-4-amd64: USB 3.0 ext HDD drive doesnt work and hangs usb 3.0 hub to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 697019: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=697019 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.2.0-4-amd64: USB 3.0 ext HDD drive doesnt work and hangs usb 3.0 hub
- From: Nick Y Kuzminyh <nickkuz@fryazino.net>
- Date: Mon, 31 Dec 2012 00:55:04 +0400
- Message-id: <20121230205504.3777.1469.reportbug@lenovo.frya.fryazino.net>
Package: src:linux Version: 3.2.35-2 Severity: normal Problem take place for portable usb 3.0 HDD (no external power source). There are two USB 3.0 ports at my laptop. There is no problem with USB 2.0 HDD and various USB 1.1 devices (such as mouse) at the usb 3.0 ports. When I plug usb 3.0 HDD device, hdd led goes On, after 5-7 sec hdd led goes Off. Hdd is not mounted. After that fail, both USB 3.0 ports became completely unusable (until reboot). Laptop Lenovo Thinkpad Edge 330G (3354-24G), CPU: Pentium B970, chipset: Intel HM77 Express, IO Controller: Intel Corporation 7 Series/C210 Series Chipset, In BIOS menu, "USB 3.0 Support=Enabled" problematic device: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub kernel log file comments: I've made the following actions: 1) attach USB 3.0 HDD drive (Seagate 500Gb) to USB 2.0 port, device is mounted properly. Unmount and detach. 2) attach old usb 2.0 HDD drive (Transcend 160Gb) to USB 3.0 port, device is mounted properly. Unmount and detach. 3) attach USB 3.0 HDD drive (Seagate 500Gb) to USB 2.0 port, device is not mounted, both USB 3.0 ports became unusable -- Package-specific info: ** Version: Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2 ** Command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=UUID=5e0a1d7f-3997-43f1-931f-ce10d19ee440 ro quiet ** Tainted: PCO (5121) * Proprietary module has been loaded. * Module from drivers/staging has been loaded. * Out-of-tree module has been loaded. ** Kernel log: [ 7.025540] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 7.477404] fbcon: inteldrmfb (fb0) is primary device [ 7.661640] Console: switching to colour frame buffer device 170x48 [ 7.665231] fb0: inteldrmfb frame buffer device [ 7.665233] drm: registered panic notifier [ 7.667136] acpi device:47: registered as cooling_device2 [ 7.667369] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10 [ 7.667418] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 7.667466] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 8.914523] Adding 9764860k swap on /dev/sda5. Priority:-1 extents:1 across:9764860k [ 8.945570] EXT4-fs (sda2): re-mounted. Opts: (null) [ 9.514518] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 9.629825] loop: module loaded [ 11.148729] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 11.330414] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input11 [ 13.803327] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 13.935770] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null) [ 14.035077] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 14.126082] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 15.511759] RPC: Registered named UNIX socket transport module. [ 15.511764] RPC: Registered udp transport module. [ 15.511767] RPC: Registered tcp transport module. [ 15.511770] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 15.550982] FS-Cache: Loaded [ 15.616493] FS-Cache: Netfs 'nfs' registered for caching [ 15.644544] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 18.138183] vboxdrv: Found 2 processor cores. [ 18.138595] vboxdrv: fAsync=0 offMin=0x8f0 offMax=0x1eae [ 18.138711] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 18.138716] vboxdrv: Successfully loaded version 4.1.18_Debian (interface 0x00190000). [ 18.255433] vboxpci: IOMMU not found (not registered) [ 18.787906] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12 [ 20.497047] Bluetooth: Core ver 2.16 [ 20.497067] NET: Registered protocol family 31 [ 20.497069] Bluetooth: HCI device and connection manager initialized [ 20.497072] Bluetooth: HCI socket layer initialized [ 20.497074] Bluetooth: L2CAP socket layer initialized [ 20.497079] Bluetooth: SCO socket layer initialized [ 20.537311] Bluetooth: RFCOMM TTY layer initialized [ 20.537322] Bluetooth: RFCOMM socket layer initialized [ 20.537327] Bluetooth: RFCOMM ver 1.11 [ 20.715213] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.715217] Bluetooth: BNEP filters: protocol multicast [ 22.450059] lp: driver loaded but no devices found [ 22.612065] ppdev: user-space parallel port driver [ 22.742709] r8169 0000:08:00.0: firmware: agent loaded rtl_nic/rtl8168e-3.fw into memory [ 22.850251] r8169 0000:08:00.0: eth0: link down [ 22.851233] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 35.798672] wlan0: no IPv6 routers present [ 189.016146] usb 1-1.2: new high-speed USB device number 4 using ehci_hcd [ 189.135709] usb 1-1.2: New USB device found, idVendor=0bc2, idProduct=2332 [ 189.135713] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 189.135716] usb 1-1.2: Product: Portable [ 189.135718] usb 1-1.2: Manufacturer: Seagate [ 189.135720] usb 1-1.2: SerialNumber: 2GH76WY5 [ 189.241115] Initializing USB Mass Storage driver... [ 189.241269] scsi7 : usb-storage 1-1.2:1.0 [ 189.241344] usbcore: registered new interface driver usb-storage [ 189.241346] USB Mass Storage support registered. [ 190.240438] scsi 7:0:0:0: Direct-Access Seagate Portable SF04 PQ: 0 ANSI: 4 [ 190.242179] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 190.242484] sd 7:0:0:0: [sdc] 976773164 512-byte logical blocks: (500 GB/465 GiB) [ 190.243105] sd 7:0:0:0: [sdc] Write Protect is off [ 190.243109] sd 7:0:0:0: [sdc] Mode Sense: 1c 00 00 00 [ 190.243934] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 190.301402] sdc: sdc1 [ 190.303859] sd 7:0:0:0: [sdc] Attached SCSI disk [ 191.485818] fuse init (API version 7.17) [ 215.726384] usb 1-1.2: USB disconnect, device number 4 [ 215.727532] sd 7:0:0:0: [sdc] Synchronizing SCSI cache [ 215.727575] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 233.033455] usb 3-4: new high-speed USB device number 2 using xhci_hcd [ 233.050297] usb 3-4: New USB device found, idVendor=152d, idProduct=2329 [ 233.050301] usb 3-4: New USB device strings: Mfr=1, Product=11, SerialNumber=5 [ 233.050304] usb 3-4: Product: StoreJet Transcend [ 233.050306] usb 3-4: Manufacturer: JMicron [ 233.050308] usb 3-4: SerialNumber: 1090439977FF [ 233.050492] usb 3-4: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes [ 233.050497] usb 3-4: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes [ 233.051117] scsi8 : usb-storage 3-4:1.0 [ 234.049471] scsi 8:0:0:0: Direct-Access StoreJet Transcend PQ: 0 ANSI: 2 CCS [ 234.050699] sd 8:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 234.051052] sd 8:0:0:0: [sdc] Write Protect is off [ 234.051056] sd 8:0:0:0: [sdc] Mode Sense: 34 00 00 00 [ 234.051137] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 234.051384] sd 8:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 234.100444] sdc: sdc1 [ 234.102572] sd 8:0:0:0: [sdc] Attached SCSI disk [ 234.962844] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended [ 234.963318] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 255.738870] usb 3-4: USB disconnect, device number 2 [ 277.926370] xhci_hcd 0000:00:14.0: Timeout while waiting for address device command [ 278.130295] xhci_hcd 0000:00:14.0: ERROR no room on ep ring [ 278.130300] xhci_hcd 0000:00:14.0: ERR: No room for command on command ring [ 278.334188] usb 4-4: device not accepting address 2, error -12 [ 278.334198] xhci_hcd 0000:00:14.0: ERROR no room on ep ring [ 278.334201] xhci_hcd 0000:00:14.0: ERR: No room for command on command ring [ 278.334206] xhci_hcd 0000:00:14.0: ERROR no room on ep ring [ 278.334208] xhci_hcd 0000:00:14.0: ERR: No room for command on command ring [ 278.334211] hub 4-0:1.0: couldn't allocate port 4 usb_device ** Model information sys_vendor: LENOVO product_name: 335424G product_version: ThinkPad Edge E330 chassis_vendor: LENOVO chassis_version: Not Available bios_vendor: LENOVO bios_version: H3ET65WW(1.02) board_vendor: LENOVO board_name: 335424G board_version: Not Defined ** Loaded modules: fuse usb_storage parport_pc ppdev lp parport bnep rfcomm bluetooth pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) binfmt_misc uinput nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc ext2 loop uvcvideo videodev v4l2_compat_ioctl32 media snd_hda_codec_hdmi snd_hda_codec_realtek i915 drm_kms_helper lib80211_crypt_tkip drm wl(P) joydev i2c_algo_bit acpi_cpufreq thinkpad_acpi snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc coretemp i2c_i801 i2c_core nvram mperf snd_seq rfkill snd_seq_device psmouse rts_pstor(C) iTCO_wdt iTCO_vendor_support snd_timer crc32c_intel ghash_clmulni_intel snd cryptd battery ac serio_raw evdev pcspkr power_supply video button processor lib80211 soundcore wmi ext4 crc16 jbd2 mbcache sg sd_mod crc_t10dif thermal thermal_sys ahci libahci xhci_hcd ehci_hcd r8169 mii libata scsi_mod usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) Subsystem: Lenovo Device [17aa:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0106] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:5006] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 44 Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 4000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI]) Subsystem: Lenovo Device [17aa:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 41 Region 0: Memory at f1600000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) Subsystem: Lenovo Device [17aa:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at f1615000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI]) Subsystem: Lenovo Device [17aa:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f161a000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) Subsystem: Lenovo Device [17aa:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 43 Region 0: Memory at f1610000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: f1500000-f15fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 [8086:1e14] (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=07, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f0d00000-f14fffff Prefetchable memory behind bridge: 00000000f0400000-00000000f0bfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 [8086:1e16] (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00002000-00002fff Prefetchable memory behind bridge: 00000000f0c00000-00000000f0cfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI]) Subsystem: Lenovo Device [17aa:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f1619000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge [0601]: Intel Corporation HM77 Express Chipset LPC Controller [8086:1e57] (rev 04) Subsystem: Lenovo Device [17aa:5006] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Lenovo Device [17aa:5006] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 42 Region 0: I/O ports at 4088 [size=8] Region 1: I/O ports at 409c [size=4] Region 2: I/O ports at 4080 [size=8] Region 3: I/O ports at 4098 [size=4] Region 4: I/O ports at 4060 [size=32] Region 5: Memory at f1618000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) Subsystem: Lenovo Device [17aa:5006] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at f1614000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at efa0 [size=32] 02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0608] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at f1500000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: wl 03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209] (rev 01) Subsystem: Lenovo Device [17aa:5006] Physical Slot: 1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f0d00000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: rts_pstor 08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 07) Subsystem: Lenovo Device [17aa:5006] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 40 Region 0: I/O ports at 2000 [size=256] Region 2: Memory at f0c04000 (64-bit, prefetchable) [size=4K] Region 4: Memory at f0c00000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 5986:0299 Acer, Inc -- System Information: Debian Release: 7.0 APT prefers testing APT policy: (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-4-amd64 depends on: ii debconf [debconf-2.0] 1.5.48 ii initramfs-tools [linux-initramfs-tool] 0.109 ii kmod 9-2 ii linux-base 3.5 ii module-init-tools 9-2 Versions of packages linux-image-3.2.0-4-amd64 recommends: ii firmware-linux-free 3.1 Versions of packages linux-image-3.2.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-23.1 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> ii firmware-brcm80211 0.36 pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> ii firmware-realtek 0.36 pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk: linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
--- End Message ---
--- Begin Message ---
- To: 697019-done@bugs.debian.org
- Subject: Re: Bug#697019: Bug is fixed: at least for stable debian 7 kernel SMP Debian 3.2.51-1 x86_64
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Thu, 02 Jan 2014 00:17:02 +0000
- Message-id: <1388621822.22017.1.camel@deadeye.wl.decadent.org.uk>
- In-reply-to: <[🔎] 52C46062.8070304@fryazino.net>
- References: <[🔎] 52C46062.8070304@fryazino.net>
Version: 3.2.51-1 On Wed, 2014-01-01 at 22:37 +0400, Nikolay Kuzminykh wrote: > Bug is fixed: > at least for stable debian 7, kernel SMP Debian 3.2.51-1 x86_64 > Ext usb-3.0 HDD is mounted properly and it works as expected. Transfer > rate shows usb-3 speed. [...] Thanks for letting us know, and sorry we didn't fix it sooner. Ben. -- Ben Hutchings The program is absolutely right; therefore, the computer must be wrong.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---