Bug#697019: Bug is fixed: at least for stable debian 7 kernel SMP Debian 3.2.51-1 x86_64
Bug is fixed:
at least for stable debian 7, kernel SMP Debian 3.2.51-1 x86_64
Ext usb-3.0 HDD is mounted properly and it works as expected. Transfer
rate shows usb-3 speed.
PS
==== "uname -a" output:
Linux lenovo 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64 GNU/Linux
==== "lsusb" output:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 5986:0299 Acer, Inc
Bus 003 Device 002: ID 0bc2:2332 Seagate RSS LLC
==== "dmesg" output:
[ 74.355092] hub 2-0:1.0: unable to enumerate USB device on port 2
[ 74.595165] usb 3-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 74.613295] usb 3-2: New USB device found, idVendor=0bc2, idProduct=2332
[ 74.613306] usb 3-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 74.613312] usb 3-2: Product: Portable
[ 74.613316] usb 3-2: Manufacturer: Seagate
[ 74.613320] usb 3-2: SerialNumber: 2GH76WY5
[ 74.750174] Initializing USB Mass Storage driver...
[ 74.750443] scsi7 : usb-storage 3-2:1.0
[ 74.750584] usbcore: registered new interface driver usb-storage
[ 74.750587] USB Mass Storage support registered.
[ 75.747222] scsi 7:0:0:0: Direct-Access Seagate Portable
SF04 PQ: 0 ANSI: 4
[ 75.749760] sd 7:0:0:0: [sdc] 976773164 512-byte logical blocks: (500
GB/465 GiB)
[ 75.750135] sd 7:0:0:0: [sdc] Write Protect is off
[ 75.750143] sd 7:0:0:0: [sdc] Mode Sense: 1c 00 00 00
[ 75.750870] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 75.752304] sd 7:0:0:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 75.806605] sdc: sdc1
[ 75.808055] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 76.429555] fuse init (API version 7.17)
Reply to: