Your message dated Mon, 27 Oct 2014 00:56:34 +0000 with message-id <1414371394.16849.3.camel@decadent.org.uk> and subject line Re: Bug#766909: linux-image-3.16-2-686-pae: During boot failed to load ar3k/AthrBT_0x01020200.dfu has caused the Debian Bug report #766909, regarding linux-image-3.16-2-686-pae: During boot failed to load ar3k/AthrBT_0x01020200.dfu to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 766909: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=766909 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: linux-image-3.16-2-686-pae: During boot failed to load ar3k/AthrBT_0x01020200.dfu
- From: naitsirch <login.naitsirch@arcor.de>
- Date: Sun, 26 Oct 2014 20:35:14 +0100
- Message-id: <[🔎] 1762221.bCvOaLAjzB@christian>
Package: src:linux Version: 3.16.3-2 Severity: minor Dear Maintainer, *** Reporter, please consider answering these questions, where appropriate *** * What led up to the situation? * What exactly did you do (or not do) that was effective (or ineffective)? * What was the outcome of this action? * What outcome did you expect instead? *** End of the template - remove these template lines *** -- Package-specific info: ** Version: Linux version 3.16-2-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20) ** Command line: BOOT_IMAGE=/vmlinuz-3.16-2-686-pae root=UUID=4af80214- e63d-447d-8bfb-468032bd71a6 ro quiet ** Tainted: PO (4097) * Proprietary module has been loaded. * Out-of-tree module has been loaded. ** Kernel log: [ 17.895050] [drm] Loading CAICOS Microcode [ 17.909096] radeon 0000:02:00.0: firmware: direct-loading firmware radeon/CAICOS_pfp.bin [ 17.968749] radeon 0000:02:00.0: firmware: direct-loading firmware radeon/CAICOS_me.bin [ 17.980321] radeon 0000:02:00.0: firmware: direct-loading firmware radeon/BTC_rlc.bin [ 18.001057] radeon 0000:02:00.0: firmware: direct-loading firmware radeon/CAICOS_mc.bin [ 18.012283] radeon 0000:02:00.0: firmware: direct-loading firmware radeon/CAICOS_smc.bin [ 18.012308] [drm] Internal thermal controller with fan control [ 18.013500] [drm] radeon: power management initialized [ 18.014398] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 18.029323] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000). [ 18.029559] radeon 0000:02:00.0: WB enabled [ 18.029563] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffad6c00 [ 18.029578] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffad6c0c [ 18.031104] radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xfa032118 [ 18.031106] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 18.031107] [drm] Driver supports precise vblank timestamp query. [ 18.031133] radeon 0000:02:00.0: irq 44 for MSI/MSI-X [ 18.031149] radeon 0000:02:00.0: radeon: using MSI. [ 18.031186] [drm] radeon: irq initialized. [ 18.047658] [drm] ring test on 0 succeeded in 1 usecs [ 18.047717] [drm] ring test on 3 succeeded in 1 usecs [ 18.234195] [drm] ring test on 5 succeeded in 1 usecs [ 18.234213] [drm] UVD initialized successfully. [ 18.234603] [drm] ib test on ring 0 succeeded in 0 usecs [ 18.234662] [drm] ib test on ring 3 succeeded in 0 usecs [ 18.385923] [drm] ib test on ring 5 succeeded [ 18.386767] [drm] Radeon Display Connectors [ 18.394389] radeon 0000:02:00.0: No connectors reported connected with modes [ 18.394402] [drm] Cannot find any crtc or sizes - going 1024x768 [ 18.399727] [drm] fb mappable at 0xB0474000 [ 18.399732] [drm] vram apper at 0xB0000000 [ 18.399735] [drm] size 3145728 [ 18.399739] [drm] fb depth is 24 [ 18.399742] [drm] pitch is 4096 [ 18.400130] radeon 0000:02:00.0: fb1: radeondrmfb frame buffer device [ 18.400170] [drm] Initialized radeon 2.39.0 20080528 for 0000:02:00.0 on minor 1 [ 18.976213] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 18.976222] Disabling lock debugging due to kernel taint [ 19.013805] <6>[fglrx] Maximum main memory to use for locked dma buffers: 5353 MBytes. [ 19.013986] <6>[fglrx] vendor: 1002 device: 9649 count: 1 [ 19.014302] <6>[fglrx] vendor: 1002 device: 6760 count: 2 [ 19.014634] <6>[fglrx] ioport: bar 1, base 0xf000, size: 0x100 [ 19.015117] <6>[fglrx] ioport: bar 4, base 0xe000, size: 0x100 [ 19.015318] <6>[fglrx] Kernel PAT support is enabled [ 19.015356] <6>[fglrx] module loaded - fglrx 14.20.7 [Sep 2 2014] with 2 minors [ 20.378663] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw [ 20.480159] r8169 0000:03:00.0 eth0: link down [ 20.480234] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.480253] r8169 0000:03:00.0 eth0: link down [ 20.742147] RPC: Registered named UNIX socket transport module. [ 20.742153] RPC: Registered udp transport module. [ 20.742154] RPC: Registered tcp transport module. [ 20.742156] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 20.792728] FS-Cache: Loaded [ 20.914889] FS-Cache: Netfs 'nfs' registered for caching [ 20.990976] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 22.112048] r8169 0000:03:00.0 eth0: link up [ 22.112071] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 29.777461] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 41.719152] apm: BIOS not found. [ 60.055299] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000). [ 60.055430] radeon 0000:02:00.0: WB enabled [ 60.055441] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffad6c00 [ 60.055448] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffad6c0c [ 60.058239] radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xfa032118 [ 60.074841] [drm] ring test on 0 succeeded in 2 usecs [ 60.074911] [drm] ring test on 3 succeeded in 1 usecs [ 60.251312] [drm] ring test on 5 succeeded in 1 usecs [ 60.251322] [drm] UVD initialized successfully. [ 60.251383] [drm] ib test on ring 0 succeeded in 0 usecs [ 60.251442] [drm] ib test on ring 3 succeeded in 1 usecs [ 60.403516] [drm] ib test on ring 5 succeeded [ 60.757214] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none [ 60.757227] vgaarb: device changed decodes: PCI:0000:00:01.0,olddecodes=io+mem,decodes=none:owns=none [ 136.190229] wlan0: authenticate with 00:1c:28:3c:29:db [ 136.203509] wlan0: send auth to 00:1c:28:3c:29:db (try 1/3) [ 136.205683] wlan0: authenticated [ 136.209529] wlan0: associate with 00:1c:28:3c:29:db (try 1/3) [ 136.226119] wlan0: RX AssocResp from 00:1c:28:3c:29:db (capab=0x411 status=0 aid=1) [ 136.226184] wlan0: associated [ 136.226197] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 136.227312] cfg80211: Calling CRDA for country: DE [ 136.283990] ath: EEPROM regdomain: 0x8114 [ 136.283996] ath: EEPROM indicates we should expect a country code [ 136.283999] ath: doing EEPROM country->regdmn map search [ 136.284000] ath: country maps to regdmn code: 0x37 [ 136.284002] ath: Country alpha2 being used: DE [ 136.284004] ath: Regpair used: 0x37 [ 136.284006] ath: regdomain 0x8114 dynamically updated by country IE [ 136.284073] cfg80211: Regulatory domain changed to country: DE [ 136.284075] cfg80211: DFS Master region: ETSI [ 136.284077] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 136.284080] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 136.284083] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 136.284085] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) [ 136.284088] cfg80211: (5470000 KHz - 5725000 KHz @ 80000 KHz), (N/A, 2698 mBm), (0 s) [ 136.284090] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 1151.827506] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6 [ 1151.840066] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced. [ 1342.062125] wlan0: AP 00:1c:28:3c:29:db changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz) ** Model information not available ** Loaded modules: ctr ccm cpufreq_conservative cpufreq_userspace cpufreq_stats cpufreq_powersave nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc fglrx(PO) joydev snd_hda_codec_realtek arc4 ath9k uvcvideo ath9k_common ath9k_hw videobuf2_vmalloc videobuf2_memops ath videobuf2_core ath3k v4l2_common btusb videodev mac80211 radeon bluetooth media psmouse samsung_laptop evdev 6lowpan_iphc cfg80211 kvm_amd rfkill kvm ttm drm_kms_helper serio_raw snd_hda_codec_generic snd_hda_codec_hdmi pcspkr drm snd_hda_intel k10temp snd_hda_controller snd_hda_codec i2c_algo_bit snd_hwdep i2c_piix4 i2c_core snd_pcm video shpchp ac snd_timer battery button acpi_cpufreq processor snd soundcore loop fuse parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 sg sd_mod sr_mod crc_t10dif cdrom crct10dif_generic crct10dif_common ohci_pci sdhci_pci sdhci mmc_core r8169 mii thermal thermal_sys ahci libahci ohci_hcd ehci_pci ehci_hcd libata scsi_mod usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Complex [1022:1705] Subsystem: Samsung Electronics Co Ltd Device [144d:c624] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Sumo [Radeon HD 6480G] [1002:9649] (prog-if 00 [VGA controller]) Subsystem: Samsung Electronics Co Ltd Device [144d:c625] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 43 Region 0: Memory at a0000000 (32-bit, prefetchable) [size=256M] Region 1: I/O ports at f000 [size=256] Region 2: Memory at feb00000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: radeon 00:01.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series] [1002:1714] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series] [1002:1714] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 42 Region 0: Memory at feb44000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Port [1022:1707] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: d0100000-d02fffff Prefetchable memory behind bridge: 00000000d0300000-00000000d04fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:03.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Port [1022:1708] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fea00000-feafffff Prefetchable memory behind bridge: 00000000b0000000-00000000bfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Port [1022:1709] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] [1022:7801] (prog-if 01 [AHCI 1.0]) Subsystem: Samsung Electronics Co Ltd Device [144d:c624] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 41 Region 0: I/O ports at f140 [size=8] Region 1: I/O ports at f130 [size=4] Region 2: I/O ports at f120 [size=8] Region 3: I/O ports at f110 [size=4] Region 4: I/O ports at f100 [size=16] Region 5: Memory at feb50000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller [1022:7807] (rev 11) (prog-if 10 [OHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c624] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at feb4f000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller [1022:7808] (rev 11) (prog-if 20 [EHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c624] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at feb4e000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller [1022:7807] (rev 11) (prog-if 10 [OHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c624] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at feb4d000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller [1022:7808] (rev 11) (prog-if 20 [EHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c624] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at feb4c000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller [1022:780b] (rev 13) Subsystem: Samsung Electronics Co Ltd Device [144d:c624] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: piix4_smbus 00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller [1022:780d] (rev 01) Subsystem: Samsung Electronics Co Ltd Device [144d:c624] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at feb40000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge [1022:780e] (rev 11) Subsystem: Samsung Electronics Co Ltd Device [144d:c624] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge [1022:780f] (rev 40) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=04, subordinate=04, sec-latency=64 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller [1022:7809] (rev 11) (prog-if 10 [OHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c624] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at feb4b000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:14.7 SD Host controller [0805]: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller [1022:7806] (prog-if 01) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller [1022:7806] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 39, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at feb4a000 (64-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci 00:15.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0) [1022:43a0] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Memory behind bridge: fe900000-fe9fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:15.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 2) [1022:43a2] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=06, subordinate=08, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fe800000-fe8fffff Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller [1022:7807] (rev 11) (prog-if 10 [OHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c624] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at feb49000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller [1022:7808] (rev 11) (prog-if 20 [EHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c624] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at feb48000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 [1022:1700] (rev 43) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1 [1022:1701] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2 [1022:1702] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3 [1022:1703] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k10temp 00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4 [1022:1704] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6 [1022:1718] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5 [1022:1716] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7 [1022:1719] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 02:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series] [1002:6760] (prog-if 00 [VGA controller]) Subsystem: Samsung Electronics Co Ltd Radeon HD 7470M [144d:c625] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at b0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at fea20000 (64-bit, non-prefetchable) [size=128K] Region 4: I/O ports at e000 [size=256] Expansion ROM at fea00000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: radeon 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06) Subsystem: Samsung Electronics Co Ltd Device [144d:c624] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 40 Region 0: I/O ports at d000 [size=256] Region 2: Memory at d0004000 (64-bit, prefetchable) [size=4K] Region 4: Memory at d0000000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 05:00.0 Network controller [0280]: Qualcomm Atheros AR9485 Wireless Network Adapter [168c:0032] (rev 01) Subsystem: Samsung Electronics Co Ltd Device [144d:4105] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe900000 (64-bit, non-prefetchable) [size=512K] Expansion ROM at fe980000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k ** USB devices: Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 2232:1020 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 0cf3:3004 Atheros Communications, Inc. Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 3.16-2-686-pae (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.16-2-686-pae depends on: ii debconf [debconf-2.0] 1.5.53 ii initramfs-tools [linux-initramfs-tool] 0.116 ii kmod 18-3 ii linux-base 3.5 ii module-init-tools 18-3 Versions of packages linux-image-3.16-2-686-pae recommends: ii firmware-linux-free 3.3 ii libc6-i686 2.19-11 Versions of packages linux-image-3.16-2-686-pae suggests: pn debian-kernel-handbook <none> ii grub-pc 2.02~beta2-15 pn linux-doc-3.16 <none> Versions of packages linux-image-3.16-2-686-pae is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux 0.43 ii firmware-linux-nonfree 0.43 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> ii firmware-realtek 0.43 pn xen-hypervisor <none> -- debconf information: linux-image-3.16-2-686-pae/postinst/depmod-error-initrd-3.16-2-686-pae: false linux-image-3.16-2-686-pae/prerm/removing-running-kernel-3.16-2-686-pae: true linux-image-3.16-2-686-pae/postinst/mips-initrd-3.16-2-686-pae: I am not sure if the selected package is really the correct one. Maybe someone could assign this report to the correct package, if needed. In the package information about 'firmware-atheros' I have found the files mentioned in the error message. But 'firmware-atheros' is not installed on my system. When booting my notebook, I get this error message: usb 5-1: firmware: failed to load ar3k/AthrBT_0x01020200.dfu (-2) Bluetooth: Loading patch file failed I do not know where it comes from. I do not need any bluetooth functionality, but I don't know how to disable it. Sorry, if this sounds a bit strange but I am just a debian user and no professional. Best regards Christian
--- End Message ---
--- Begin Message ---
- To: 766909-done@bugs.debian.org
- Subject: Re: Bug#766909: linux-image-3.16-2-686-pae: During boot failed to load ar3k/AthrBT_0x01020200.dfu
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Mon, 27 Oct 2014 00:56:34 +0000
- Message-id: <1414371394.16849.3.camel@decadent.org.uk>
- In-reply-to: <[🔎] 1762221.bCvOaLAjzB@christian>
- References: <[🔎] 1762221.bCvOaLAjzB@christian>
On Sun, 2014-10-26 at 20:35 +0100, naitsirch wrote: [...] > I am not sure if the selected package is really the correct one. Maybe someone > could assign this report to the correct package, if needed. In the package > information about 'firmware-atheros' I have found the files mentioned in the > error message. But 'firmware-atheros' is not installed on my system. So this is not a bug. > When booting my notebook, I get this error message: > usb 5-1: firmware: failed to load ar3k/AthrBT_0x01020200.dfu (-2) > Bluetooth: Loading patch file failed > > I do not know where it comes from. I do not need any bluetooth functionality, > but I don't know how to disable it. Sorry, if this sounds a bit strange but I > am just a debian user and no professional. Ignore the error message if you don't care about the Bluetooth device. Ben. -- Ben Hutchings Theory and practice are closer in theory than in practice. - John Levine, moderator of comp.compilersAttachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---