Bug#766909: linux-image-3.16-2-686-pae: During boot failed to load ar3k/AthrBT_0x01020200.dfu
Package: src:linux
Version: 3.16.3-2
Severity: minor
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these template lines ***
-- Package-specific info:
** Version:
Linux version 3.16-2-686-pae (debian-kernel@lists.debian.org) (gcc version
4.8.3 (Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20)
** Command line:
BOOT_IMAGE=/vmlinuz-3.16-2-686-pae root=UUID=4af80214-
e63d-447d-8bfb-468032bd71a6 ro quiet
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[ 17.895050] [drm] Loading CAICOS Microcode
[ 17.909096] radeon 0000:02:00.0: firmware: direct-loading firmware
radeon/CAICOS_pfp.bin
[ 17.968749] radeon 0000:02:00.0: firmware: direct-loading firmware
radeon/CAICOS_me.bin
[ 17.980321] radeon 0000:02:00.0: firmware: direct-loading firmware
radeon/BTC_rlc.bin
[ 18.001057] radeon 0000:02:00.0: firmware: direct-loading firmware
radeon/CAICOS_mc.bin
[ 18.012283] radeon 0000:02:00.0: firmware: direct-loading firmware
radeon/CAICOS_smc.bin
[ 18.012308] [drm] Internal thermal controller with fan control
[ 18.013500] [drm] radeon: power management initialized
[ 18.014398] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 18.029323] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
[ 18.029559] radeon 0000:02:00.0: WB enabled
[ 18.029563] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr
0x0000000040000c00 and cpu addr 0xffad6c00
[ 18.029578] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr
0x0000000040000c0c and cpu addr 0xffad6c0c
[ 18.031104] radeon 0000:02:00.0: fence driver on ring 5 use gpu addr
0x0000000000072118 and cpu addr 0xfa032118
[ 18.031106] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 18.031107] [drm] Driver supports precise vblank timestamp query.
[ 18.031133] radeon 0000:02:00.0: irq 44 for MSI/MSI-X
[ 18.031149] radeon 0000:02:00.0: radeon: using MSI.
[ 18.031186] [drm] radeon: irq initialized.
[ 18.047658] [drm] ring test on 0 succeeded in 1 usecs
[ 18.047717] [drm] ring test on 3 succeeded in 1 usecs
[ 18.234195] [drm] ring test on 5 succeeded in 1 usecs
[ 18.234213] [drm] UVD initialized successfully.
[ 18.234603] [drm] ib test on ring 0 succeeded in 0 usecs
[ 18.234662] [drm] ib test on ring 3 succeeded in 0 usecs
[ 18.385923] [drm] ib test on ring 5 succeeded
[ 18.386767] [drm] Radeon Display Connectors
[ 18.394389] radeon 0000:02:00.0: No connectors reported connected with
modes
[ 18.394402] [drm] Cannot find any crtc or sizes - going 1024x768
[ 18.399727] [drm] fb mappable at 0xB0474000
[ 18.399732] [drm] vram apper at 0xB0000000
[ 18.399735] [drm] size 3145728
[ 18.399739] [drm] fb depth is 24
[ 18.399742] [drm] pitch is 4096
[ 18.400130] radeon 0000:02:00.0: fb1: radeondrmfb frame buffer device
[ 18.400170] [drm] Initialized radeon 2.39.0 20080528 for 0000:02:00.0 on
minor 1
[ 18.976213] fglrx: module license 'Proprietary. (C) 2002 - ATI
Technologies, Starnberg, GERMANY' taints kernel.
[ 18.976222] Disabling lock debugging due to kernel taint
[ 19.013805] <6>[fglrx] Maximum main memory to use for locked dma buffers:
5353 MBytes.
[ 19.013986] <6>[fglrx] vendor: 1002 device: 9649 count: 1
[ 19.014302] <6>[fglrx] vendor: 1002 device: 6760 count: 2
[ 19.014634] <6>[fglrx] ioport: bar 1, base 0xf000, size: 0x100
[ 19.015117] <6>[fglrx] ioport: bar 4, base 0xe000, size: 0x100
[ 19.015318] <6>[fglrx] Kernel PAT support is enabled
[ 19.015356] <6>[fglrx] module loaded - fglrx 14.20.7 [Sep 2 2014] with 2
minors
[ 20.378663] r8169 0000:03:00.0: firmware: direct-loading firmware
rtl_nic/rtl8168e-3.fw
[ 20.480159] r8169 0000:03:00.0 eth0: link down
[ 20.480234] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.480253] r8169 0000:03:00.0 eth0: link down
[ 20.742147] RPC: Registered named UNIX socket transport module.
[ 20.742153] RPC: Registered udp transport module.
[ 20.742154] RPC: Registered tcp transport module.
[ 20.742156] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 20.792728] FS-Cache: Loaded
[ 20.914889] FS-Cache: Netfs 'nfs' registered for caching
[ 20.990976] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 22.112048] r8169 0000:03:00.0 eth0: link up
[ 22.112071] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 29.777461] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 41.719152] apm: BIOS not found.
[ 60.055299] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
[ 60.055430] radeon 0000:02:00.0: WB enabled
[ 60.055441] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr
0x0000000040000c00 and cpu addr 0xffad6c00
[ 60.055448] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr
0x0000000040000c0c and cpu addr 0xffad6c0c
[ 60.058239] radeon 0000:02:00.0: fence driver on ring 5 use gpu addr
0x0000000000072118 and cpu addr 0xfa032118
[ 60.074841] [drm] ring test on 0 succeeded in 2 usecs
[ 60.074911] [drm] ring test on 3 succeeded in 1 usecs
[ 60.251312] [drm] ring test on 5 succeeded in 1 usecs
[ 60.251322] [drm] UVD initialized successfully.
[ 60.251383] [drm] ib test on ring 0 succeeded in 0 usecs
[ 60.251442] [drm] ib test on ring 3 succeeded in 1 usecs
[ 60.403516] [drm] ib test on ring 5 succeeded
[ 60.757214] vgaarb: device changed decodes:
PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 60.757227] vgaarb: device changed decodes:
PCI:0000:00:01.0,olddecodes=io+mem,decodes=none:owns=none
[ 136.190229] wlan0: authenticate with 00:1c:28:3c:29:db
[ 136.203509] wlan0: send auth to 00:1c:28:3c:29:db (try 1/3)
[ 136.205683] wlan0: authenticated
[ 136.209529] wlan0: associate with 00:1c:28:3c:29:db (try 1/3)
[ 136.226119] wlan0: RX AssocResp from 00:1c:28:3c:29:db (capab=0x411
status=0 aid=1)
[ 136.226184] wlan0: associated
[ 136.226197] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 136.227312] cfg80211: Calling CRDA for country: DE
[ 136.283990] ath: EEPROM regdomain: 0x8114
[ 136.283996] ath: EEPROM indicates we should expect a country code
[ 136.283999] ath: doing EEPROM country->regdmn map search
[ 136.284000] ath: country maps to regdmn code: 0x37
[ 136.284002] ath: Country alpha2 being used: DE
[ 136.284004] ath: Regpair used: 0x37
[ 136.284006] ath: regdomain 0x8114 dynamically updated by country IE
[ 136.284073] cfg80211: Regulatory domain changed to country: DE
[ 136.284075] cfg80211: DFS Master region: ETSI
[ 136.284077] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 136.284080] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 136.284083] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 136.284085] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz), (N/A, 2000
mBm), (0 s)
[ 136.284088] cfg80211: (5470000 KHz - 5725000 KHz @ 80000 KHz), (N/A, 2698
mBm), (0 s)
[ 136.284090] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A,
4000 mBm), (N/A)
[ 1151.827506] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at
byte 6
[ 1151.840066] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver
resynced.
[ 1342.062125] wlan0: AP 00:1c:28:3c:29:db changed bandwidth, new config is
2452 MHz, width 1 (2452/0 MHz)
** Model information
not available
** Loaded modules:
ctr
ccm
cpufreq_conservative
cpufreq_userspace
cpufreq_stats
cpufreq_powersave
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
fglrx(PO)
joydev
snd_hda_codec_realtek
arc4
ath9k
uvcvideo
ath9k_common
ath9k_hw
videobuf2_vmalloc
videobuf2_memops
ath
videobuf2_core
ath3k
v4l2_common
btusb
videodev
mac80211
radeon
bluetooth
media
psmouse
samsung_laptop
evdev
6lowpan_iphc
cfg80211
kvm_amd
rfkill
kvm
ttm
drm_kms_helper
serio_raw
snd_hda_codec_generic
snd_hda_codec_hdmi
pcspkr
drm
snd_hda_intel
k10temp
snd_hda_controller
snd_hda_codec
i2c_algo_bit
snd_hwdep
i2c_piix4
i2c_core
snd_pcm
video
shpchp
ac
snd_timer
battery
button
acpi_cpufreq
processor
snd
soundcore
loop
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
sg
sd_mod
sr_mod
crc_t10dif
cdrom
crct10dif_generic
crct10dif_common
ohci_pci
sdhci_pci
sdhci
mmc_core
r8169
mii
thermal
thermal_sys
ahci
libahci
ohci_hcd
ehci_pci
ehci_hcd
libata
scsi_mod
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h
Processor Root Complex [1022:1705]
Subsystem: Samsung Electronics Co Ltd Device [144d:c624]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] Sumo [Radeon HD 6480G] [1002:9649] (prog-if 00 [VGA controller])
Subsystem: Samsung Electronics Co Ltd Device [144d:c625]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at a0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at f000 [size=256]
Region 2: Memory at feb00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: radeon
00:01.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI]
BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series] [1002:1714]
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek HDMI Audio
[Radeon HD 6500D and 6400G-6600G series] [1002:1714]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 42
Region 0: Memory at feb44000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Family 12h
Processor Root Port [1022:1707] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d0100000-d02fffff
Prefetchable memory behind bridge: 00000000d0300000-00000000d04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Family 12h
Processor Root Port [1022:1708] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000b0000000-00000000bfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Family 12h
Processor Root Port [1022:1709] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] FCH SATA
Controller [AHCI mode] [1022:7801] (prog-if 01 [AHCI 1.0])
Subsystem: Samsung Electronics Co Ltd Device [144d:c624]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 41
Region 0: I/O ports at f140 [size=8]
Region 1: I/O ports at f130 [size=4]
Region 2: I/O ports at f120 [size=8]
Region 3: I/O ports at f110 [size=4]
Region 4: I/O ports at f100 [size=16]
Region 5: Memory at feb50000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI
Controller [1022:7807] (rev 11) (prog-if 10 [OHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c624]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feb4f000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI
Controller [1022:7808] (rev 11) (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c624]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at feb4e000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI
Controller [1022:7807] (rev 11) (prog-if 10 [OHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c624]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feb4d000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI
Controller [1022:7808] (rev 11) (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c624]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at feb4c000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller
[1022:780b] (rev 13)
Subsystem: Samsung Electronics Co Ltd Device [144d:c624]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: piix4_smbus
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] FCH Azalia
Controller [1022:780d] (rev 01)
Subsystem: Samsung Electronics Co Ltd Device [144d:c624]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at feb40000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge
[1022:780e] (rev 11)
Subsystem: Samsung Electronics Co Ltd Device [144d:c624]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge
[1022:780f] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI
Controller [1022:7809] (rev 11) (prog-if 10 [OHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c624]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at feb4b000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:14.7 SD Host controller [0805]: Advanced Micro Devices, Inc. [AMD] FCH SD
Flash Controller [1022:7806] (prog-if 01)
Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller
[1022:7806]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 39, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at feb4a000 (64-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
00:15.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Hudson PCI to
PCI bridge (PCIE port 0) [1022:43a0] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: fe900000-fe9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:15.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Hudson PCI to
PCI bridge (PCIE port 2) [1022:43a2] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=08, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe800000-fe8fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI
Controller [1022:7807] (rev 11) (prog-if 10 [OHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c624]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feb49000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI
Controller [1022:7808] (rev 11) (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c624]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at feb48000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h
Processor Function 0 [1022:1700] (rev 43)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h
Processor Function 1 [1022:1701]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h
Processor Function 2 [1022:1702]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h
Processor Function 3 [1022:1703]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h
Processor Function 4 [1022:1704]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h
Processor Function 6 [1022:1718]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h
Processor Function 5 [1022:1716]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h
Processor Function 7 [1022:1719]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
02:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] Seymour [Radeon HD 6400M/7400M Series] [1002:6760] (prog-if 00 [VGA
controller])
Subsystem: Samsung Electronics Co Ltd Radeon HD 7470M [144d:c625]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fea20000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at e000 [size=256]
Expansion ROM at fea00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
Subsystem: Samsung Electronics Co Ltd Device [144d:c624]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at d0004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
05:00.0 Network controller [0280]: Qualcomm Atheros AR9485 Wireless Network
Adapter [168c:0032] (rev 01)
Subsystem: Samsung Electronics Co Ltd Device [144d:4105]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe900000 (64-bit, non-prefetchable) [size=512K]
Expansion ROM at fe980000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
** USB devices:
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 2232:1020
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 0cf3:3004 Atheros Communications, Inc.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 3.16-2-686-pae (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.16-2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.116
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-3.16-2-686-pae recommends:
ii firmware-linux-free 3.3
ii libc6-i686 2.19-11
Versions of packages linux-image-3.16-2-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-15
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16-2-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.43
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.43
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16-2-686-pae/postinst/depmod-error-initrd-3.16-2-686-pae:
false
linux-image-3.16-2-686-pae/prerm/removing-running-kernel-3.16-2-686-pae:
true
linux-image-3.16-2-686-pae/postinst/mips-initrd-3.16-2-686-pae:
I am not sure if the selected package is really the correct one. Maybe someone
could assign this report to the correct package, if needed. In the package
information about 'firmware-atheros' I have found the files mentioned in the
error message. But 'firmware-atheros' is not installed on my system.
When booting my notebook, I get this error message:
usb 5-1: firmware: failed to load ar3k/AthrBT_0x01020200.dfu (-2)
Bluetooth: Loading patch file failed
I do not know where it comes from. I do not need any bluetooth functionality,
but I don't know how to disable it. Sorry, if this sounds a bit strange but I
am just a debian user and no professional.
Best regards
Christian
Reply to: