Bug#764703: linux-image-3.16-2-amd64: simple-scan (and maybe colord) hung (D) when a HP F2280 scanner is on / standby
Package: src:linux
Version: 3.16.3-2
Severity: normal
Dear Maintainer,
The computer is a desktop with KDE and an HP Deskjet F2280 printer /
scanner. It upgraded a while ago to Jessie. I believe that the scanner
was not used for quite some time. While this is a KDE system, GNOME's
simple-scan is used for scanning. The system also has a webcam.
Recently the user noticed that scanning may leave a hung simple-scan
window. Digging further I noticed that even if I try to kill them they
are left zombies (Z) and there are several processes on the system in
D state.
One scenario is starting simple-scan when the scanner is on, turning it
off and then trying to scan. This seems to cause colord-sane to hang:
$ ps aux | grep ' [D]'
colord 4871 0.0 0.4 261804 9292 ? Dl 12:45 0:00 /usr/lib/colord/colord-sane
Turning the scanner back on (after a very long time) released the process.
However if I start the scanner while simple-scan is running, I get the
following two processes hung:
$ ps aux | grep ' [D]'
lp 7003 0.1 0.9 126484 19236 ? D 14:25 0:00 /usr/bin/python /usr/lib/cups/backend/hpfax
lp 7004 0.0 0.1 36160 3068 ? D 14:25 0:00 hp
The trace I get from the kernel for the location of the task is the
same as the one below for colord-sane.
Powering the scanner on again while simple-scan is running may produce
another pair of D state hp and hpfax processes.
-- Package-specific info:
** Version:
Linux version 3.16-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16-2-amd64 root=UUID=415906d6-2b68-474b-b4b8-efd7690f3f59 ro quiet
** Not tainted
** Kernel log:
[ 1200.092116] ffffffffa015a044 ffff88003b3953f0 00000000ffffffff ffffffffa015a048
[ 1200.092122] Call Trace:
[ 1200.092149] [<ffffffff81508e35>] ? schedule_preempt_disabled+0x25/0x70
[ 1200.092154] [<ffffffff8150a8f3>] ? __mutex_lock_slowpath+0xd3/0x1c0
[ 1200.092163] [<ffffffff8150a9fb>] ? mutex_lock+0x1b/0x2a
[ 1200.092171] [<ffffffffa0157387>] ? pp_ioctl+0x27/0x970 [ppdev]
[ 1200.092177] [<ffffffff811b750f>] ? do_vfs_ioctl+0x2cf/0x4b0
[ 1200.092182] [<ffffffff811b7771>] ? SyS_ioctl+0x81/0xa0
[ 1200.092187] [<ffffffff8150c26d>] ? system_call_fast_compare_end+0x10/0x15
[ 1320.092126] INFO: task colord-sane:4871 blocked for more than 120 seconds.
[ 1320.092135] Not tainted 3.16-2-amd64 #1
[ 1320.092137] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1320.092140] colord-sane D ffff88003b395848 0 4871 1235 0x00000000
[ 1320.092147] ffff88003b3953f0 0000000000000086 0000000000014240 ffff88003b2e3fd8
[ 1320.092151] 0000000000014240 ffff88003b3953f0 ffffffffa015a040 ffff88003b2e3e78
[ 1320.092155] ffffffffa015a044 ffff88003b3953f0 00000000ffffffff ffffffffa015a048
[ 1320.092159] Call Trace:
[ 1320.092204] [<ffffffff81508e35>] ? schedule_preempt_disabled+0x25/0x70
[ 1320.092209] [<ffffffff8150a8f3>] ? __mutex_lock_slowpath+0xd3/0x1c0
[ 1320.092216] [<ffffffff8150a9fb>] ? mutex_lock+0x1b/0x2a
[ 1320.092222] [<ffffffffa0157387>] ? pp_ioctl+0x27/0x970 [ppdev]
[ 1320.092232] [<ffffffff811b750f>] ? do_vfs_ioctl+0x2cf/0x4b0
[ 1320.092235] [<ffffffff811b7771>] ? SyS_ioctl+0x81/0xa0
[ 1320.092238] [<ffffffff8150c26d>] ? system_call_fast_compare_end+0x10/0x15
[ 1440.092107] INFO: task colord-sane:4871 blocked for more than 120 seconds.
[ 1440.092116] Not tainted 3.16-2-amd64 #1
[ 1440.092119] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1440.092122] colord-sane D ffff88003b395848 0 4871 1235 0x00000000
[ 1440.092129] ffff88003b3953f0 0000000000000086 0000000000014240 ffff88003b2e3fd8
[ 1440.092135] 0000000000014240 ffff88003b3953f0 ffffffffa015a040 ffff88003b2e3e78
[ 1440.092139] ffffffffa015a044 ffff88003b3953f0 00000000ffffffff ffffffffa015a048
[ 1440.092145] Call Trace:
[ 1440.092173] [<ffffffff81508e35>] ? schedule_preempt_disabled+0x25/0x70
[ 1440.092178] [<ffffffff8150a8f3>] ? __mutex_lock_slowpath+0xd3/0x1c0
[ 1440.092187] [<ffffffff8150a9fb>] ? mutex_lock+0x1b/0x2a
[ 1440.092195] [<ffffffffa0157387>] ? pp_ioctl+0x27/0x970 [ppdev]
[ 1440.092201] [<ffffffff811b750f>] ? do_vfs_ioctl+0x2cf/0x4b0
[ 1440.092205] [<ffffffff811b7771>] ? SyS_ioctl+0x81/0xa0
[ 1440.092210] [<ffffffff8150c26d>] ? system_call_fast_compare_end+0x10/0x15
[ 1560.092085] INFO: task colord-sane:4871 blocked for more than 120 seconds.
[ 1560.092092] Not tainted 3.16-2-amd64 #1
[ 1560.092095] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1560.092098] colord-sane D ffff88003b395848 0 4871 1235 0x00000000
[ 1560.092105] ffff88003b3953f0 0000000000000086 0000000000014240 ffff88003b2e3fd8
[ 1560.092111] 0000000000014240 ffff88003b3953f0 ffffffffa015a040 ffff88003b2e3e78
[ 1560.092115] ffffffffa015a044 ffff88003b3953f0 00000000ffffffff ffffffffa015a048
[ 1560.092121] Call Trace:
[ 1560.092148] [<ffffffff81508e35>] ? schedule_preempt_disabled+0x25/0x70
[ 1560.092154] [<ffffffff8150a8f3>] ? __mutex_lock_slowpath+0xd3/0x1c0
[ 1560.092162] [<ffffffff8150a9fb>] ? mutex_lock+0x1b/0x2a
[ 1560.092170] [<ffffffffa0157387>] ? pp_ioctl+0x27/0x970 [ppdev]
[ 1560.092176] [<ffffffff811b750f>] ? do_vfs_ioctl+0x2cf/0x4b0
[ 1560.092181] [<ffffffff811b7771>] ? SyS_ioctl+0x81/0xa0
[ 1560.092186] [<ffffffff8150c26d>] ? system_call_fast_compare_end+0x10/0x15
[ 1572.937894] perf interrupt took too long (5054 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[ 1680.092085] INFO: task colord-sane:4871 blocked for more than 120 seconds.
[ 1680.092094] Not tainted 3.16-2-amd64 #1
[ 1680.092096] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1680.092100] colord-sane D ffff88003b395848 0 4871 1235 0x00000000
[ 1680.092107] ffff88003b3953f0 0000000000000086 0000000000014240 ffff88003b2e3fd8
[ 1680.092113] 0000000000014240 ffff88003b3953f0 ffffffffa015a040 ffff88003b2e3e78
[ 1680.092117] ffffffffa015a044 ffff88003b3953f0 00000000ffffffff ffffffffa015a048
[ 1680.092123] Call Trace:
[ 1680.092149] [<ffffffff81508e35>] ? schedule_preempt_disabled+0x25/0x70
[ 1680.092155] [<ffffffff8150a8f3>] ? __mutex_lock_slowpath+0xd3/0x1c0
[ 1680.092163] [<ffffffff8150a9fb>] ? mutex_lock+0x1b/0x2a
[ 1680.092172] [<ffffffffa0157387>] ? pp_ioctl+0x27/0x970 [ppdev]
[ 1680.092178] [<ffffffff811b750f>] ? do_vfs_ioctl+0x2cf/0x4b0
[ 1680.092182] [<ffffffff811b7771>] ? SyS_ioctl+0x81/0xa0
[ 1680.092187] [<ffffffff8150c26d>] ? system_call_fast_compare_end+0x10/0x15
[ 1800.092099] INFO: task colord-sane:4871 blocked for more than 120 seconds.
[ 1800.092108] Not tainted 3.16-2-amd64 #1
[ 1800.092111] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1800.092114] colord-sane D ffff88003b395848 0 4871 1235 0x00000000
[ 1800.092121] ffff88003b3953f0 0000000000000086 0000000000014240 ffff88003b2e3fd8
[ 1800.092127] 0000000000014240 ffff88003b3953f0 ffffffffa015a040 ffff88003b2e3e78
[ 1800.092131] ffffffffa015a044 ffff88003b3953f0 00000000ffffffff ffffffffa015a048
[ 1800.092137] Call Trace:
[ 1800.092165] [<ffffffff81508e35>] ? schedule_preempt_disabled+0x25/0x70
[ 1800.092171] [<ffffffff8150a8f3>] ? __mutex_lock_slowpath+0xd3/0x1c0
[ 1800.092179] [<ffffffff8150a9fb>] ? mutex_lock+0x1b/0x2a
[ 1800.092187] [<ffffffffa0157387>] ? pp_ioctl+0x27/0x970 [ppdev]
[ 1800.092193] [<ffffffff811b750f>] ? do_vfs_ioctl+0x2cf/0x4b0
[ 1800.092198] [<ffffffff811b7771>] ? SyS_ioctl+0x81/0xa0
[ 1800.092203] [<ffffffff8150c26d>] ? system_call_fast_compare_end+0x10/0x15
[ 1920.092083] INFO: task colord-sane:4871 blocked for more than 120 seconds.
[ 1920.092091] Not tainted 3.16-2-amd64 #1
[ 1920.092094] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1920.092097] colord-sane D ffff88003b395848 0 4871 1235 0x00000000
[ 1920.092104] ffff88003b3953f0 0000000000000086 0000000000014240 ffff88003b2e3fd8
[ 1920.092110] 0000000000014240 ffff88003b3953f0 ffffffffa015a040 ffff88003b2e3e78
[ 1920.092115] ffffffffa015a044 ffff88003b3953f0 00000000ffffffff ffffffffa015a048
[ 1920.092120] Call Trace:
[ 1920.092146] [<ffffffff81508e35>] ? schedule_preempt_disabled+0x25/0x70
[ 1920.092152] [<ffffffff8150a8f3>] ? __mutex_lock_slowpath+0xd3/0x1c0
[ 1920.092160] [<ffffffff8150a9fb>] ? mutex_lock+0x1b/0x2a
[ 1920.092168] [<ffffffffa0157387>] ? pp_ioctl+0x27/0x970 [ppdev]
[ 1920.092174] [<ffffffff811b750f>] ? do_vfs_ioctl+0x2cf/0x4b0
[ 1920.092179] [<ffffffff811b7771>] ? SyS_ioctl+0x81/0xa0
[ 1920.092184] [<ffffffff8150c26d>] ? system_call_fast_compare_end+0x10/0x15
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 0505
board_vendor: ASUSTeK Computer INC.
board_name: P5G41C-M LX
board_version: Rev X.0x
** Loaded modules:
cpufreq_stats
cpufreq_userspace
cpufreq_conservative
cpufreq_powersave
usblp
binfmt_misc
cfg80211
rfkill
uvcvideo
snd_usb_audio
videobuf2_vmalloc
videobuf2_memops
snd_usbmidi_lib
videobuf2_core
snd_rawmidi
v4l2_common
videodev
snd_seq_device
joydev
hid_generic
media
usbhid
hid
coretemp
evdev
kvm_intel
kvm
iTCO_wdt
iTCO_vendor_support
i915
snd_hda_codec_via
snd_hda_codec_generic
psmouse
pcspkr
serio_raw
snd_hda_intel
video
snd_hda_controller
snd_hda_codec
snd_hwdep
snd_pcm
lpc_ich
snd_timer
drm_kms_helper
mfd_core
drm
snd
shpchp
soundcore
rng_core
i2c_algo_bit
i2c_core
asus_atk0110
button
acpi_cpufreq
processor
thermal_sys
loop
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
sd_mod
crc_t10dif
crct10dif_generic
sg
sr_mod
cdrom
crct10dif_common
ata_generic
ata_piix
libata
scsi_mod
r8169
mii
ehci_pci
uhci_hcd
ehci_hcd
usbcore
usb_common
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
#NetworkManager#iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 20:cf:30:85:82:0c brd ff:ff:ff:ff:ff:ff
inet 192.168.0.100/24 brd 192.168.0.255 scope global dynamic eth0
valid_lft 4808sec preferred_lft 4808sec
inet6 fe80::22cf:30ff:fe85:820c/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
eth0: 4311173 12314 0 0 0 0 0 0 2885812 9186 0 0 0 0 0 0
lo: 18720 111 0 0 0 0 0 0 18720 111 0 0 0 0 0 0
*** Protocol statistics:
Ip:
12625 total packets received
1 with invalid addresses
0 forwarded
0 incoming packets discarded
12580 incoming packets delivered
8912 requests sent out
4 dropped because of missing route
Icmp:
3 ICMP messages received
3 input ICMP message failed.
ICMP input histogram:
destination unreachable: 3
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
IcmpMsg:
InType3: 3
Tcp:
178 active connections openings
619 passive connection openings
30 failed connection attempts
2 connection resets received
2 connections established
6367 segments received
6322 segments send out
41 segments retransmited
3 bad segments received.
63 resets sent
Udp:
5985 packets received
0 packets to unknown port received.
0 packet receive errors
2518 packets sent
UdpLite:
TcpExt:
667 TCP sockets finished time wait in fast timer
87 delayed acks sent
Quick ack mode was activated 2 times
1610 packet headers predicted
1757 acknowledgments not containing data payload received
258 predicted acknowledgments
5 times recovered from packet loss by selective acknowledgements
1 congestion windows recovered without slow start after partial ack
9 fast retransmits
3 forward retransmits
3 other TCP timeouts
TCPLossProbes: 20
TCPLossProbeRecovery: 12
2 DSACKs sent for old packets
1 DSACKs received
8 connections reset due to unexpected data
2 connections reset due to early user close
TCPSackShiftFallback: 16
TCPRcvCoalesce: 182
TCPOFOQueue: 65
TCPChallengeACK: 3
TCPSYNChallenge: 3
TCPAutoCorking: 597
TCPSynRetrans: 9
TCPOrigDataSent: 2308
IpExt:
InMcastPkts: 5745
OutMcastPkts: 426
InBcastPkts: 99
OutBcastPkts: 48
InOctets: 4172116
OutOctets: 2722944
InMcastOctets: 1458568
OutMcastOctets: 67107
InBcastOctets: 9034
OutBcastOctets: 2352
InNoECTPkts: 12667
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e30] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:836d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e32] (rev 03) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:836d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at dc00 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:8415]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at feaf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 80000000-801fffff
Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at feaf7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 0: I/O ports at d080 [size=8]
Region 1: I/O ports at d000 [size=4]
Region 2: I/O ports at cc00 [size=8]
Region 3: I/O ports at c880 [size=4]
Region 4: I/O ports at c800 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 03)
Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard [1043:83a3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 42
Region 0: I/O ports at e800 [size=256]
Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fdff8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at febf0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 003 Device 014: ID 1c4f:0034 SiGma Micro
Bus 003 Device 005: ID 045e:0779 Microsoft Corp. LifeCam HD-3000
Bus 003 Device 004: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business
Bus 003 Device 003: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=he_IL.UTF-8, LC_CTYPE=he_IL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.16-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.116
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-3.16-2-amd64 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.16-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-22
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16-2-amd64/prerm/removing-running-kernel-3.16-2-amd64: true
linux-image-3.16-2-amd64/postinst/mips-initrd-3.16-2-amd64:
linux-image-3.16-2-amd64/postinst/depmod-error-initrd-3.16-2-amd64: false
Reply to: