Bug#742226: linux-image-3.13-1-amd64: Internet banking fails to detect Java with Debian kernels
Package: src:linux
Version: 3.13.6-1
Severity: important
Dear Maintainer,
When using Debian kernels, my browser fails to detect Java when accessing my Internet Banking. When using vanilla kernels, everything works perfectly.
More precisely:
The Internet banking site is Banco do Brasil (http://www.bb.com.br . Clicking on the small blue OK button on the top of the page launches the Java security applet required to access the bank account).
On the same computer:
- When booting with the linux-image-3.13-1-amd64, the browser returns an error (No Java detected)
- When booting with the vanilla linux kernel (3.13.6, compiled with kernel-package), the Java applet executes normally.
This problem seems to be independent from the Internet browser (the same behavior is observed with Iceweasel, Chromium and Opera) and independent from the Java version (problem observed with OpenJDK6, OpenJDK7 and Oracle's Java 7).
Note that this problem was oberved with other versions of the kernel (3.10 for instance), but does not occur on Wheezy (Unless the kernel is upgraded with Jessie's one for instance).
I believe that one of the patch applied on Debian kernel interferes with the relationship between the Browser and Java when running the Internet banking applet.
Could you please investigated?
Thank you.
Sincerely,
-- Package-specific info:
** Version:
Linux version 3.13-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-16) ) #1 SMP Debian 3.13.6-1 (2014-03-19)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.13-1-amd64 root=UUID=d82080a0-6d04-4273-ba17-219f53d534ba ro quiet
** Not tainted
** Kernel log:
[ 2.419178] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff:
[ 2.419191] excluding 0xa0000000-0xa0ffffff
[ 2.419209] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff:
[ 2.419221] excluding 0x60000000-0x60ffffff
[ 2.419490] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 2.419498] excluding 0xc0000-0xcffff 0xe0000-0xfffff
[ 2.419526] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 2.419539] excluding 0xa0000000-0xa0ffffff
[ 2.419557] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 2.419569] excluding 0x60000000-0x60ffffff
[ 2.559078] usb 4-1: New USB device found, idVendor=046d, idProduct=c50e
[ 2.559089] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.559096] usb 4-1: Product: USB RECEIVER
[ 2.559103] usb 4-1: Manufacturer: Logitech
[ 2.580700] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.590801] random: nonblocking pool is initialized
[ 2.597147] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input16
[ 2.600092] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 2.600168] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 2.600238] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 2.600528] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \_SB_.C003.C004.C0D2 1 (20131115/utaddress-251)
[ 2.600535] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.600541] ACPI Warning: 0x0000000000001130-0x000000000000113f SystemIO conflicts with Region \_SB_.C003.C004.C0E4 1 (20131115/utaddress-251)
[ 2.600546] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.600548] ACPI Warning: 0x0000000000001100-0x000000000000112f SystemIO conflicts with Region \_SB_.C003.C004.C0E4 1 (20131115/utaddress-251)
[ 2.600552] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.600554] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.600886] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 2.600941] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
[ 2.602479] usbcore: registered new interface driver usbhid
[ 2.602482] usbhid: USB HID core driver
[ 2.603720] iTCO_vendor_support: vendor-support=0
[ 2.604254] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 2.604303] iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060)
[ 2.604851] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.607658] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[ 2.607669] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.0/input/input21
[ 2.608123] hid-generic 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.1-1/input0
[ 2.899002] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa44793/0x300000/0x0, board id: 71, fw id: 240405
[ 2.899017] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[ 2.938591] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
[ 3.300034] pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1
[ 3.300042] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0d0000-0x0dffff:
[ 3.302143] clean.
[ 3.302146] pcmcia_socket pcmcia_socket1: cs: memory probe 0xe4130000-0xe43fffff:
[ 3.306554] excluding 0xe43f0000-0xe441bfff
[ 3.306700] pcmcia 1.0: pcmcia: registering new device pcmcia1.0 (IRQ: 17)
[ 3.355376] scsi5 : pata_pcmcia
[ 3.355450] ata6: PATA max PIO0 cmd 0x7100 ctl 0x710e irq 17
[ 3.431335] Adding 2097148k swap on /dev/sda6. Priority:-1 extents:1 across:2097148k SS
[ 3.452975] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 3.517441] EXT4-fs (sda5): re-mounted. Opts: discard,data=ordered,errors=remount-ro
[ 3.708230] device-mapper: uevent: version 1.0.3
[ 3.708408] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 3.876948] lp0: using parport0 (interrupt-driven).
[ 3.886044] ppdev: user-space parallel port driver
[ 3.903378] fuse init (API version 7.22)
[ 3.906293] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: discard,data=ordered
[ 3.927659] loop: module loaded
[ 4.304375] RPC: Registered named UNIX socket transport module.
[ 4.304379] RPC: Registered udp transport module.
[ 4.304381] RPC: Registered tcp transport module.
[ 4.304383] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.308358] FS-Cache: Loaded
[ 4.316691] FS-Cache: Netfs 'nfs' registered for caching
[ 4.325944] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 5.240358] Bluetooth: Core ver 2.17
[ 5.240603] NET: Registered protocol family 31
[ 5.240606] Bluetooth: HCI device and connection manager initialized
[ 5.241645] Bluetooth: HCI socket layer initialized
[ 5.241675] Bluetooth: L2CAP socket layer initialized
[ 5.241684] Bluetooth: SCO socket layer initialized
[ 5.257413] Bluetooth: RFCOMM TTY layer initialized
[ 5.257432] Bluetooth: RFCOMM socket layer initialized
[ 5.257440] Bluetooth: RFCOMM ver 1.11
[ 5.258212] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.258217] Bluetooth: BNEP filters: protocol multicast
[ 5.258228] Bluetooth: BNEP socket layer initialized
[ 5.910488] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 5.985796] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input23
[ 6.012120] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 6.012283] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.181669] psmouse serio5: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 6.275240] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8.845435] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input22
[ 9.687720] wlan0: authenticate with 2c:b0:5d:3d:50:7e
[ 9.705709] wlan0: send auth to 2c:b0:5d:3d:50:7e (try 1/3)
[ 9.707949] wlan0: send auth to 2c:b0:5d:3d:50:7e (try 2/3)
[ 9.745083] wlan0: authenticated
[ 9.745392] iwl4965 0000:10:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 9.745402] iwl4965 0000:10:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 9.748104] wlan0: associate with 2c:b0:5d:3d:50:7e (try 1/3)
[ 9.749146] wlan0: RX AssocResp from 2c:b0:5d:3d:50:7e (capab=0x11 status=0 aid=1)
[ 9.776262] wlan0: associated
[ 9.776329] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 11.188877] type=1006 audit(1395343678.047:2): pid=3295 uid=0 old auid=4294967295 new auid=1026 old ses=4294967295 new ses=1 res=1
[ 31.504765] Key type dns_resolver registered
[ 31.534650] NFS: Registering the id_resolver key type
[ 31.534666] Key type id_resolver registered
[ 31.534669] Key type id_legacy registered
** Model information
sys_vendor: Hewlett-Packard
product_name: HP Compaq 8510p
product_version: F.15
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: 68MVD Ver. F.15
board_vendor: Hewlett-Packard
board_name: 30C5
board_version: KBC Version 71.36
** Loaded modules:
nfsv4
dns_resolver
ctr
ccm
cpufreq_userspace
cpufreq_powersave
cpufreq_stats
cpufreq_conservative
bnep
rfcomm
bluetooth
autofs4
uinput
rpcsec_gss_krb5
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
loop
firewire_sbp2
fuse
ppdev
lp
dm_crypt
dm_mod
pata_pcmcia
joydev
hid_generic
snd_hda_codec_hdmi
iTCO_wdt
iTCO_vendor_support
usbhid
hid
hp_wmi
sparse_keymap
pcmcia
coretemp
kvm_intel
kvm
pcspkr
psmouse
serio_raw
evdev
lpc_ich
mfd_core
yenta_socket
pcmcia_rsrc
pcmcia_core
arc4
snd_hda_codec_analog
battery
wmi
snd_hda_intel
parport_pc
parport
snd_hda_codec
snd_hwdep
snd_pcm
snd_page_alloc
snd_seq
snd_seq_device
tpm_infineon
snd_timer
tpm
video
hp_accel
lis3lv02d
iwl4965
input_polldev
iwlegacy
mac80211
acpi_cpufreq
button
snd
cfg80211
ac
processor
rfkill
soundcore
ext4
crc16
mbcache
jbd2
sd_mod
crct10dif_generic
sg
crc_t10dif
sr_mod
cdrom
crct10dif_common
ata_generic
sdhci_pci
sdhci
mmc_core
firewire_ohci
firewire_core
crc_itu_t
ahci
libahci
ata_piix
libata
scsi_mod
fan
thermal
thermal_sys
ehci_pci
uhci_hcd
ehci_hcd
e1000e
usbcore
usb_common
ptp
pps_core
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
Subsystem: Hewlett-Packard Company Device [103c:30c5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port [8086:2a01] (rev 0c) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: e4400000-e44fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:19.0 Ethernet controller [0200]: Intel Corporation 82566MM Gigabit Network Connection [8086:1049] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30c5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at e4500000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at e4520000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 5000 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30c5]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 5020 [size=32]
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30c5]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 5040 [size=32]
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:30c5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e4521000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30c5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at e4524000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: e4000000-e40fffff
Prefetchable memory behind bridge: 00000000c8000000-00000000c81fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=28, subordinate=28, sec-latency=0
I/O behind bridge: 00002000-00003fff
Memory behind bridge: e0000000-e3ffffff
Prefetchable memory behind bridge: 00000000c8200000-00000000c83fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30c5]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 5060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30c5]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at 5080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30c5]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 50a0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:30c5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at e4528000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=07, sec-latency=32
I/O behind bridge: 00007000-00007fff
Memory behind bridge: e4100000-e43fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000c7ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M-E) LPC Interface Controller [8086:2811] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30c5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device [103c:30c5]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 50c0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:30c5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 45
Region 0: I/O ports at 13f0 [size=8]
Region 1: I/O ports at 15f4 [size=4]
Region 2: I/O ports at 1370 [size=8]
Region 3: I/O ports at 1574 [size=4]
Region 4: I/O ports at 5100 [size=32]
Region 5: Memory at e4529000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV630/M76 [Mobility Radeon HD 2600] [1002:9581] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:30c5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 4000 [size=256]
Region 2: Memory at e4400000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at e4420000 [disabled] [size=128K]
Capabilities: <access denied>
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] RV630 HDMI Audio [Radeon HD 2600 Series] [1002:aa08]
Subsystem: Hewlett-Packard Company Device [103c:30c5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 48
Region 0: Memory at e4410000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
02:06.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b9)
Subsystem: Hewlett-Packard Company Device [103c:30c5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e4100000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=03, sec-latency=176
Memory window 0: c0000000-c3ffffff (prefetchable)
Memory window 1: cc000000-cfffffff
I/O window 0: 00007000-000070ff
I/O window 1: 00007400-000074ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Capabilities: <access denied>
Kernel driver in use: yenta_cardbus
02:06.1 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b9)
Subsystem: Hewlett-Packard Company Device [103c:30c5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin B routed to IRQ 17
Region 0: Memory at e4101000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=04, subordinate=07, sec-latency=176
Memory window 0: c4000000-c7ffffff (prefetchable)
Memory window 1: e8000000-ebffffff
I/O window 0: 00007800-000078ff
I/O window 1: 00007c00-00007cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
Capabilities: <access denied>
Kernel driver in use: yenta_cardbus
02:06.2 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 03) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:30c5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e4102000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
02:06.3 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 20)
Subsystem: Hewlett-Packard Company Device [103c:30c5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 19
Region 0: Memory at e4103000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
10:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection [8086:4229] (rev 61)
Subsystem: Intel Corporation Vaio VGN-SZ79SN_C [8086:1100]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at e4000000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwl4965
** USB devices:
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (900, 'testing'), (450, 'unstable'), (50, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.13-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.13-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.52
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 16-2
ii linux-base 3.5
ii module-init-tools 16-2
Versions of packages linux-image-3.13-1-amd64 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.13-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-22
pn linux-doc-3.13 <none>
Versions of packages linux-image-3.13-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.41
pn firmware-libertas <none>
ii firmware-linux 0.41
ii firmware-linux-nonfree 0.41
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.13-1-amd64/postinst/depmod-error-initrd-3.13-1-amd64: false
linux-image-3.13-1-amd64/prerm/removing-running-kernel-3.13-1-amd64: true
Reply to: