Bug#738991: linux-image-3.12-1-amd64: Dell E7230 (and similar) : unable to use external monitor through dock
Package: src:linux
Version: 3.12.9-1
Severity: normal
Tags: patch upstream
Dear Maintainer,
As per https://bugs.freedesktop.org/show_bug.cgi?id=73694 ,
connecting an external monitor via a port replicator does not work, and one gets
lots of
[ 71.064428] [drm:intel_dp_complete_link_train] *ERROR* failed to train DP, aborting
[ 72.050687] [drm:intel_dp_complete_link_train] *ERROR* failed to train DP, aborting
[ 72.896907] [drm:intel_dp_complete_link_train] *ERROR* failed to train DP, aborting
Comment 2 to that bug suggests a patch https://bugs.freedesktop.org/attachment.cgi?id=92231
It works for me against 3.12 and the reporter said it worked against 3.13 as well.
Please include !
Cheers,
Itai.
-- Package-specific info:
** Version:
Linux version 3.12-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-14) ) #1 SMP Debian 3.12.9-1 (2014-02-01)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.12-1-amd64 root=/dev/sda1 ro resume=LABEL=Swap quiet splash
** Tainted: WO (4608)
* Taint on warning.
* Out-of-tree module has been loaded.
** Kernel log:
[ 3.115193] uvcvideo: Found UVC 1.00 device <unnamed> (046d:08ca)
[ 3.132914] input: UVC Camera (046d:08ca) as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input14
[ 3.132955] usbcore: registered new interface driver uvcvideo
[ 3.132956] USB Video Class driver (1.1.1)
[ 3.361031] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 3.368413] usb 4-1.6.1: new high-speed USB device number 7 using ehci-pci
[ 3.388824] Adding 15623208k swap on /dev/sdb2. Priority:-1 extents:1 across:15623208k
[ 3.460697] usb 4-1.6.1: New USB device found, idVendor=0424, idProduct=2640
[ 3.460699] usb 4-1.6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.461095] hub 4-1.6.1:1.0: USB hub found
[ 3.461179] hub 4-1.6.1:1.0: 3 ports detected
[ 3.587714] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.732335] usb 4-1.6.1.1: new high-speed USB device number 8 using ehci-pci
[ 3.857739] vboxdrv: Found 4 processor cores.
[ 3.857928] vboxdrv: fAsync=0 offMin=0x18d offMax=0x3114
[ 3.857970] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 3.857971] vboxdrv: Successfully loaded version 4.3.2_Debian (interface 0x001a0005).
[ 3.883049] usb 4-1.6.1.1: New USB device found, idVendor=0424, idProduct=4060
[ 3.883053] usb 4-1.6.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.883054] usb 4-1.6.1.1: Product: Ultra Fast Media Reader
[ 3.883056] usb 4-1.6.1.1: Manufacturer: Generic
[ 3.883057] usb 4-1.6.1.1: SerialNumber: F110A60117AA
[ 3.908414] usb-storage 4-1.6.1.1:1.0: USB Mass Storage device detected
[ 3.908605] scsi6 : usb-storage 4-1.6.1.1:1.0
[ 3.908656] usbcore: registered new interface driver usb-storage
[ 3.912116] vboxpci: IOMMU not found (not registered)
[ 3.915409] lp: driver loaded but no devices found
[ 3.927614] ppdev: user-space parallel port driver
[ 3.968282] usb 4-1.6.1.3: new full-speed USB device number 9 using ehci-pci
[ 3.936051] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
[ 4.060225] parport0: irq 7 detected
[ 4.064641] usb 4-1.6.1.3: New USB device found, idVendor=050d, idProduct=0121
[ 4.064643] usb 4-1.6.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.064645] usb 4-1.6.1.3: Product: BELKIN BLUETOOTH USB ADAPTER CL. 1
[ 4.064646] usb 4-1.6.1.3: Manufacturer: Broadcom Corp
[ 4.080519] Bluetooth: Core ver 2.16
[ 4.080529] NET: Registered protocol family 31
[ 4.080530] Bluetooth: HCI device and connection manager initialized
[ 4.080535] Bluetooth: HCI socket layer initialized
[ 4.080537] Bluetooth: L2CAP socket layer initialized
[ 4.080540] Bluetooth: SCO socket layer initialized
[ 4.081752] usbcore: registered new interface driver btusb
[ 4.100257] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
[ 4.156164] lp0: using parport0 (polling).
[ 4.204109] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
[ 4.204344] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.919104] scsi 6:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.82 PQ: 0 ANSI: 0
[ 4.919327] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 4.935947] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 7.364331] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 7.364366] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 13.727133] type=1305 audit(1391582859.679:62167): auid=4294967295 ses=4294967295 op="remove rule" key=(null) list=4 res=1
[ 13.727137] type=1305 audit(1391582859.679:62168): audit_enabled=0 old=1 auid=4294967295 ses=4294967295
[ 13.727137] res=1
[158378.186128] perf samples too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[184539.576704] dconf worker[29912]: segfault at 8 ip 00007f5689a4839c sp 00007f566ed98930 error 4 in libgio-2.0.so.0.3600.4[7f56899a5000+154000]
[203392.134441] 5:3:3: cannot get freq at ep 0x86
[203392.141941] 5:3:3: cannot set freq 16000 to ep 0x86
[203397.138555] 5:3:3: cannot set freq 16000 to ep 0x86
[203402.137417] 5:3:3: cannot set freq 16000 to ep 0x86
[203407.136156] 5:3:3: cannot set freq 16000 to ep 0x86
[203412.134932] 5:3:3: cannot set freq 16000 to ep 0x86
[203417.133654] 5:3:3: cannot set freq 16000 to ep 0x86
[203422.132517] 5:3:3: cannot set freq 16000 to ep 0x86
[203427.131237] 5:3:3: cannot set freq 16000 to ep 0x86
[203432.129974] 5:3:3: cannot set freq 16000 to ep 0x86
[203437.128729] 5:3:3: cannot set freq 16000 to ep 0x86
[203437.927718] hda-intel 0000:00:1b.0: Unstable LPIB (65420 >= 32768); disabling LPIB delay counting
[203442.127449] 5:3:3: cannot set freq 16000 to ep 0x86
[203447.126311] 5:3:3: cannot set freq 16000 to ep 0x86
[203452.125051] 5:3:3: cannot set freq 16000 to ep 0x86
[203457.123789] 5:3:3: cannot set freq 16000 to ep 0x86
[203462.122527] 5:3:3: cannot set freq 16000 to ep 0x86
[203467.121392] 5:3:3: cannot set freq 16000 to ep 0x86
[204001.892127] traps: gmpc[26332] trap int3 ip:7f63e778be8d sp:7ffff61ec940 error:0
[204003.483584] traps: gmpc[26333] trap int3 ip:7fde2d409e8d sp:7fff4fc3bce0 error:0
[204005.723099] traps: gmpc[26335] trap int3 ip:7f685e873e8d sp:7fff2a793500 error:0
[204007.290862] traps: gmpc[26336] trap int3 ip:7f8cfdc88e8d sp:7ffff307f320 error:0
[204008.682452] traps: gmpc[26337] trap int3 ip:7f9c9cfbee8d sp:7fffa7592a10 error:0
[204010.218147] traps: gmpc[26339] trap int3 ip:7fb0fb2f4e8d sp:7fff62b402d0 error:0
[204015.297048] traps: gmpc[26341] trap int3 ip:7f7c936bae8d sp:7fff411c9f20 error:0
[204028.678656] traps: gmpc[26372] trap int3 ip:7feaf2715e8d sp:7fff6f758440 error:0
[204031.069255] traps: gmpc[26374] trap int3 ip:7f2059212e8d sp:7ffffdb50d50 error:0
[443342.367504] vboxdrv: Found 4 processor cores.
[443342.367632] vboxdrv: fAsync=0 offMin=0x1e3 offMax=0xdd1
[443342.367670] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[443342.367671] vboxdrv: Successfully loaded version 4.3.2_Debian (interface 0x001a0005).
[443342.384168] vboxpci: IOMMU not found (not registered)
[606103.993593] systemd-udevd[16838]: starting version 204
[606113.739995] systemd-journald[241]: Received SIGTERM
[606125.129667] vboxdrv: Found 4 processor cores.
[606125.129777] vboxdrv: fAsync=0 offMin=0x43d offMax=0x1dbb
[606125.129815] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[606125.129816] vboxdrv: Successfully loaded version 4.3.2_Debian (interface 0x001a0005).
[606125.146015] vboxpci: IOMMU not found (not registered)
[625885.328164] tun: Universal TUN/TAP device driver, 1.6
[625885.328167] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[707151.085573] gnome-shell[15409]: segfault at 6e0eb50 ip 0000000006e0eb50 sp 00007ffff414ac08 error 15
[718619.516892] traps: gmpc[29406] trap int3 ip:7f2c64a2ae8d sp:7fff4f063520 error:0
[725862.980380] [drm:ring_stuck] *ERROR* Kicking stuck semaphore on render ring
** Model information
sys_vendor: Dell Inc.
product_name: OptiPlex 990
product_version: 01
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A07
board_vendor: Dell Inc.
board_name: 06D7TR
board_version: A00
** Loaded modules:
ecb
tun
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
btusb
bluetooth
rfkill
parport_pc
ppdev
lp
pci_stub
parport
usb_storage
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
snd_usb_audio
videodev
snd_usbmidi_lib
media
snd_rawmidi
snd_seq_device
x86_pkg_temp_thermal
intel_powerclamp
coretemp
kvm_intel
kvm
iTCO_wdt
crct10dif_pclmul
iTCO_vendor_support
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
dcdbas
cryptd
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
psmouse
serio_raw
snd_hwdep
snd_pcm
i2c_i801
snd_page_alloc
lpc_ich
snd_timer
mfd_core
snd
soundcore
evdev
processor
mei_me
mei
fuse
ecryptfs
autofs4
hid_generic
usbhid
hid
ext4
crc16
mbcache
jbd2
sg
sd_mod
sr_mod
crc_t10dif
cdrom
crct10dif_common
ahci
libahci
xhci_hcd
ehci_pci
ehci_hcd
libata
scsi_mod
usbcore
i915
usb_common
video
e1000e
i2c_algo_bit
drm_kms_helper
ptp
pps_core
drm
i2c_core
thermal_sys
button
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0100] (rev 09)
Subsystem: Dell Device [1028:047e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0102] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:047e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at e0c00000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 3000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Dell Device [1028:047e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 48
Region 0: Memory at e1ab0000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:16.3 Serial controller [0700]: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller [8086:1c3d] (rev 04) (prog-if 02 [16550])
Subsystem: Dell Device [1028:047e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 30e0 [size=8]
Region 1: Memory at e1a90000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
Subsystem: Dell Device [1028:047e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 40
Region 0: Memory at e1a00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at e1a80000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 3080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:047e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e1a70000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04)
Subsystem: Dell Device [1028:047e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 49
Region 0: Memory at e1a60000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: e1000000-e19fffff
Prefetchable memory behind bridge: 00000000e0000000-00000000e09fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:047e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: Memory at e1a50000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation Q67 Express Chipset Family LPC Controller [8086:1c4e] (rev 04)
Subsystem: Dell Device [1028:047e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller [8086:1c02] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:047e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 47
Region 0: I/O ports at 30d0 [size=8]
Region 1: I/O ports at 30c0 [size=4]
Region 2: I/O ports at 30b0 [size=8]
Region 3: I/O ports at 30a0 [size=4]
Region 4: I/O ports at 3060 [size=32]
Region 5: Memory at e1a40000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04)
Subsystem: Dell Device [1028:047e]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e1a30000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 3040 [size=32]
02:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 03) (prog-if 30 [XHCI])
Subsystem: Dell Device [1028:0498]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e1000000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
** USB devices:
Bus 004 Device 009: ID 050d:0121 Belkin Components F5D5050 100Mbps Ethernet
Bus 004 Device 008: ID 0424:4060 Standard Microsystems Corp. Ultra Fast Media Reader
Bus 004 Device 007: ID 0424:2640 Standard Microsystems Corp. USB 2.0 Hub
Bus 004 Device 006: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 004 Device 005: ID 046d:08ca Logitech, Inc. Mic (Fusion)
Bus 004 Device 004: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 004 Device 003: ID 046d:c315 Logitech, Inc. Classic Keyboard 200
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (600, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.12-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.12-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.52
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 16-2
ii linux-base 3.5
ii module-init-tools 16-2
Versions of packages linux-image-3.12-1-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.12-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-22
pn linux-doc-3.12 <none>
Versions of packages linux-image-3.12-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.12-1-amd64/prerm/removing-running-kernel-3.12-1-amd64: true
linux-image-3.12-1-amd64/postinst/depmod-error-initrd-3.12-1-amd64: false
Reply to: