--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32-bpo.3-amd64: burning DVD+RW very slow with HL-DT-ST DVD+/-RW GSA-U20N
- From: hikaru <hikaru.debian@web.de>
- Date: Tue, 20 Apr 2010 19:40:00 +0200
- Message-id: <20100420174000.4888.67029.reportbug@debian820QM.lan>
Package: linux-2.6
Version: 2.6.32-9~bpo50+1
Severity: normal
Burning DVD+RW with the OEM(?) notebook drive HL-DT-ST DVD+/-RW GSA-U20N
is very slow (100-300kB/s) with kernel 2.6.32. It seems to me like there
is some problem with the throughput of the device buffer, since it's
almost always empty and isn't filled fluently.
I checked the backports kernels 2.6.30 and 2.6.29 too, they are also affected.
Also 2.6.28 from grml 2009.05 has this problem.
DVD-R(W) and CD-R(W) are not affected. And with 2.6.26 the speed is
also normal for DVD+RW (>3MB/s). CentOS with kernel 2.6.18 works fine
too, so it seems to be a problem with recent kernel versions.
It's independent of the wodim/cdrecord choice. I tried both with
Lenny and 2.6.32. Both have this very poor DVD+RW writing speed while
they work fine with 2.6.26 and the very same disc. I also tried
different disc brands but always had the same result.
The notebook is from DELL (chipset: Intel PM55), but the same drive should
also be found in different recent Lenovo Thinkpads.
example output of wodim -v dev=/dev/dvd -pad <image name>:
--------------------
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent
defaults.
TOC Type: 1 = CD-ROM
scsidev: '/dev/dvd'
devname: '/dev/dvd'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
SCSI buffer size: 64512
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVD+-RW GSA-U20N'
Revision : 'A201'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x001A (DVD+RW)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW) (current)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1114112 = 1088 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if
device
communication breaks or freezes immediately after that.
Drive DMA Speed: 15620 kB/s 88x CD 11x DVD
FIFO size : 12582912 = 12288 KB
Track 01: data 688 MB padsize: 30 KB
Total size: 790 MB (78:17.94) = 352346 sectors
Lout start: 790 MB (78:19/71) = 352346 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
wodim: WARNING: Data may not fit on standard 74min disk.
Speed set to 3324 KB/s
Starting to write CD/DVD at speed 2.0 in real unknown mode for single
session.
Last chance to quit, starting real write in 0 seconds. Operation
starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 02: 80 of 688 MB written (fifo 98%) [buf 45%] 0.1x.^Cwodim:
Caught interrupt.
Writing time: 626.733s
Min drive buffer fill was 0%
Total of 44 possible drive buffer underruns predicted.
wodim: fifo had 1523 puts and 1333 gets.
wodim: fifo was 0 times empty and 686 times full, min fill was 93%.
--------------------
output of hdparm -iI /dev/dvd:
--------------------
/dev/dvd:
Model=HL-DT-ST DVD+/-RW GSA-U20N , FwRev=A201 ,
SerialNo=K0Z948J1659
Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=unknown, BuffSize=0kB, MaxMultSect=0
(maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=no
Drive conforms to: Unspecified: ATA/ATAPI-4,5,6,7
* signifies the current active mode
ATAPI CD-ROM, with removable media
Model Number: HL-DT-ST DVD+/-RW GSA-U20N
Serial Number: K0Z948J1659
Firmware Revision: A201
Standards:
Likely used CD-ROM ATAPI-1
Configuration:
DRQ response: 50us.
Packet size: 12 bytes
Capabilities:
LBA, IORDY(can be disabled)
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5
*udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* Power Management feature set
* PACKET command feature set
* DEVICE_RESET command
* NOP cmd
* SATA-I signaling speed (1.5Gb/s)
* Phy event counters
* Asynchronous notification (eg. media change)
* Software settings preservation
--------------------
-- Package-specific info:
** Version:
Linux version 2.6.32-bpo.3-amd64 (Debian 2.6.32-9~bpo50+1) (norbert@tretkowski.de) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Mon Mar 15 13:49:35 UTC 2010
** Command line:
root=/dev/sda1 ro
** Tainted: PW (513)
* Proprietary module has been loaded.
* Taint on warning.
** Kernel log:
[ 8.232400] [<ffffffff8122e7da>] ? menu_select+0x145/0x205
[ 8.233164] [<ffffffff8122dadb>] ? cpuidle_idle_call+0x95/0xee
[ 8.233945] [<ffffffff8100fe90>] ? cpu_idle+0xa2/0xda
[ 8.236452] ---[ end trace eeb2c40081769569 ]---
[ 8.239888] yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cf8, PCI irq 19
[ 8.240054] yenta_cardbus 0000:03:01.0: Socket status: 30000006
[ 8.240211] pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
[ 8.240392] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 8.240570] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xf1c00000 - 0xf1cfffff
[ 8.249556] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 8.263115] acpi device:24: registered as cooling_device8
[ 8.300521] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:22/LNXVIDEO:00/input/input9
[ 8.307449] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 8.482776] alloc irq_desc for 21 on node -1
[ 8.482780] alloc kstat_irqs on node -1
[ 8.482791] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 8.483017] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8.505735] usb-storage: device scan complete
[ 8.514556] scsi 6:0:0:0: Direct-Access Lexar ExpressCard 1100 PQ: 0 ANSI: 0 CCS
[ 8.515222] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 8.515926] sd 6:0:0:0: [sdc] 31457280 512-byte logical blocks: (16.1 GB/15.0 GiB)
[ 8.516799] sd 6:0:0:0: [sdc] Write Protect is off
[ 8.516911] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 8.516915] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 8.519788] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 8.519903] sdc: sdc1 sdc2
[ 8.521417] sdc2: <solaris: [s0] sdc5 [s2] sdc6 [s8] sdc7 >
[ 8.523793] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 8.523930] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 8.657326] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 8.666839] input: HDA Intel Mic at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.667073] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 8.667313] input: HDA Intel Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 8.667571] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 9.699279] Adding 9767480k swap on /dev/sda6. Priority:-1 extents:1 across:9767480k
[ 10.040428] EXT3 FS on sda1, internal journal
[ 10.706318] loop: module loaded
[ 11.182740] fuse init (API version 7.13)
[ 11.282745] kjournald starting. Commit interval 5 seconds
[ 11.282789] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 11.283337] EXT3 FS on sda5, internal journal
[ 11.283592] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.338874] kjournald starting. Commit interval 5 seconds
[ 11.338936] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 11.339604] EXT3 FS on sdb5, internal journal
[ 11.339859] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.368073] kjournald starting. Commit interval 5 seconds
[ 11.368632] EXT3 FS on sda2, internal journal
[ 11.368933] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.223590] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/serio2/input/input15
[ 12.739335] alloc irq_desc for 37 on node -1
[ 12.739337] alloc kstat_irqs on node -1
[ 12.739354] tg3 0000:09:00.0: irq 37 for MSI/MSI-X
[ 12.805580] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.275789] ACPI Warning for \_PR_.CPU0._PSD: Return Package type mismatch at index 4 - found [NULL Object Descriptor], expected Integer (20090903/nspredef-1012)
[ 13.275797] ACPI: Invalid _PSD data
[ 13.275842] ACPI Warning for \_PR_.CPU1._PSD: Return Package type mismatch at index 4 - found [NULL Object Descriptor], expected Integer (20090903/nspredef-1012)
[ 13.275848] ACPI: Invalid _PSD data
[ 13.275891] ACPI Warning for \_PR_.CPU2._PSD: Return Package type mismatch at index 4 - found [NULL Object Descriptor], expected Integer (20090903/nspredef-1012)
[ 13.275897] ACPI: Invalid _PSD data
[ 13.275940] ACPI Warning for \_PR_.CPU3._PSD: Return Package type mismatch at index 4 - found [NULL Object Descriptor], expected Integer (20090903/nspredef-1012)
[ 13.275946] ACPI: Invalid _PSD data
[ 13.275989] ACPI Warning for \_PR_.CPU4._PSD: Return Package type mismatch at index 4 - found [NULL Object Descriptor], expected Integer (20090903/nspredef-1012)
[ 13.275994] ACPI: Invalid _PSD data
[ 13.276107] ACPI Warning for \_PR_.CPU5._PSD: Return Package type mismatch at index 4 - found [NULL Object Descriptor], expected Integer (20090903/nspredef-1012)
[ 13.276113] ACPI: Invalid _PSD data
[ 13.276154] ACPI Warning for \_PR_.CPU6._PSD: Return Package type mismatch at index 4 - found [NULL Object Descriptor], expected Integer (20090903/nspredef-1012)
[ 13.276160] ACPI: Invalid _PSD data
[ 13.276199] ACPI Warning for \_PR_.CPU7._PSD: Return Package type mismatch at index 4 - found [NULL Object Descriptor], expected Integer (20090903/nspredef-1012)
[ 13.276204] ACPI: Invalid _PSD data
[ 14.358073] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 14.358235] tg3: eth0: Flow control is off for TX and off for RX.
[ 14.359114] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.668469] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 15.668471] vboxdrv: Successfully done.
[ 15.668472] vboxdrv: Found 8 processor cores.
[ 15.668512] VBoxDrv: dbg - g_abExecMemory=ffffffffa02ea360
[ 15.669198] vboxdrv: fAsync=0 offMin=0xd3 offMax=0x17691
[ 15.669389] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 15.669559] vboxdrv: Successfully loaded version 3.1.6 (interface 0x00100001).
[ 18.076769] Bluetooth: Core ver 2.15
[ 18.077118] NET: Registered protocol family 31
[ 18.077272] Bluetooth: HCI device and connection manager initialized
[ 18.077426] Bluetooth: HCI socket layer initialized
[ 18.106664] Bluetooth: L2CAP ver 2.14
[ 18.106823] Bluetooth: L2CAP socket layer initialized
[ 18.114473] Bluetooth: RFCOMM TTY layer initialized
[ 18.114647] Bluetooth: RFCOMM socket layer initialized
[ 18.114805] Bluetooth: RFCOMM ver 1.11
[ 20.450927] nvidia: module license 'NVIDIA' taints kernel.
[ 20.450933] Disabling lock debugging due to kernel taint
[ 21.099870] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 21.099917] nvidia 0000:01:00.0: setting latency timer to 64
[ 21.100285] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.53 Wed Dec 9 15:29:46 PST 2009
[ 36.185094] eth0: no IPv6 routers present
[ 42.007384] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[ 42.017949] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[ 42.029692] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[ 42.040919] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[ 206.716524] CE: hpet increasing min_delta_ns to 15000 nsec
** Model information
sys_vendor: Dell Inc.
product_name: Precision M6500
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A00
board_vendor: Dell Inc.
board_name:
board_version:
** Loaded modules:
Module Size Used by
ext2 52825 4
nvidia 9505953 31
rfcomm 29437 0
l2cap 24656 5 rfcomm
crc16 1319 1 l2cap
bluetooth 41731 4 rfcomm,l2cap
vboxnetadp 4225 0
vboxnetflt 9978 0
vboxdrv 1710854 2 vboxnetadp,vboxnetflt
acpi_cpufreq 5523 0
cpufreq_powersave 902 0
cpufreq_conservative 5162 0
cpufreq_userspace 1960 0
cpufreq_stats 2659 0
fuse 49886 1
firewire_sbp2 11402 0
loop 11735 0
snd_hda_codec_idt 42433 1
snd_hda_intel 19571 1
joydev 8379 0
pcmcia 19426 0
snd_hda_codec 54212 2 snd_hda_codec_idt,snd_hda_intel
snd_hwdep 5364 1 snd_hda_codec
snd_pcm_oss 32591 0
snd_mixer_oss 12606 1 snd_pcm_oss
snd_pcm 60615 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
uvcvideo 51663 0
videodev 29865 1 uvcvideo
v4l1_compat 11442 2 uvcvideo,videodev
video 17461 0
dell_laptop 1969 0
yenta_socket 19115 1
output 1692 1 video
ac 2192 0
snd_seq_midi 4400 0
rfkill 12932 2 bluetooth,dell_laptop
rsrc_nonstatic 7294 1 yenta_socket
wmi 4307 0
v4l2_compat_ioctl32 8538 1 videodev
tifm_7xx1 3850 0
i2c_i801 7798 0
battery 4998 0
snd_rawmidi 15483 1 snd_seq_midi
pcmcia_core 23974 3 pcmcia,yenta_socket,rsrc_nonstatic
button 4634 0
tifm_core 4324 1 tifm_7xx1
dcdbas 5000 1 dell_laptop
i2c_core 15552 3 nvidia,videodev,i2c_i801
snd_seq_midi_event 4628 1 snd_seq_midi
serio_raw 3752 0
snd_seq 42657 2 snd_seq_midi,snd_seq_midi_event
psmouse 49473 0
evdev 7336 8
snd_timer 15470 2 snd_pcm,snd_seq
snd_seq_device 4477 3 snd_seq_midi,snd_rawmidi,snd_seq
processor 30103 9 acpi_cpufreq
snd 46318 13 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 4598 1 snd
snd_page_alloc 6137 2 snd_hda_intel,snd_pcm
pcspkr 1699 0
ext3 106070 4
jbd 36813 1 ext3
mbcache 4970 2 ext2,ext3
sg 18696 6
sr_mod 12602 0
cdrom 29399 1 sr_mod
sd_mod 29609 12
crc_t10dif 1276 1 sd_mod
usbhid 32988 0
usb_storage 38425 4
hid 62745 1 usbhid
ahci 31990 9
sdhci_pci 5533 0
sdhci 13902 1 sdhci_pci
mmc_core 45040 1 sdhci
led_class 2401 1 sdhci
libata 131879 1 ahci
firewire_ohci 19436 0
firewire_core 36560 2 firewire_sbp2,firewire_ohci
crc_itu_t 1307 1 firewire_core
ehci_hcd 30466 0
tg3 95439 0
scsi_mod 121653 6 firewire_sbp2,sg,sr_mod,sd_mod,usb_storage,libata
libphy 13510 1 tg3
usbcore 121495 5 uvcvideo,usbhid,usb_storage,ehci_hcd
nls_base 6377 1 usbcore
thermal 11674 0
fan 3346 0
thermal_sys 11878 4 video,processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Clarksfield/Lynnfield DMI [8086:d132] (rev 11)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:03.0 PCI bridge [0604]: Intel Corporation Clarksfield/Lynnfield PCI Express Root Port 1 [8086:d138] (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f2000000-f6efffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:08.0 System peripheral [0880]: Intel Corporation Clarksfield/Lynnfield System Management Registers [8086:d155] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:08.1 System peripheral [0880]: Intel Corporation Clarksfield/Lynnfield Semaphore and Scratchpad Registers [8086:d156] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:08.2 System peripheral [0880]: Intel Corporation Clarksfield/Lynnfield System Control and Status Registers [8086:d157] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:08.3 System peripheral [0880]: Intel Corporation Clarksfield/Lynnfield Miscellaneous Registers [8086:d158] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.0 System peripheral [0880]: Intel Corporation Device [8086:d150] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.1 System peripheral [0880]: Intel Corporation Device [8086:d151] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1a.0 USB Controller [0c03]: Intel Corporation Ibex Peak USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:02ef]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fed1d000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation Ibex Peak High Definition Audio [8086:3b56] (rev 05)
Subsystem: Dell Device [1028:02ef]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f6ffc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation Ibex Peak PCI Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation Ibex Peak PCI Express Root Port 4 [8086:3b48] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0d, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f1e00000-f1ffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation Ibex Peak PCI Express Root Port 5 [8086:3b4a] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.5 PCI bridge [0604]: Intel Corporation Ibex Peak PCI Express Root Port 6 [8086:3b4c] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Memory behind bridge: f1d00000-f1dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.6 PCI bridge [0604]: Intel Corporation Ibex Peak PCI Express Root Port 7 [8086:3b4e] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0f, subordinate=0f, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.7 PCI bridge [0604]: Intel Corporation Ibex Peak PCI Express Root Port 8 [8086:3b50] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation Ibex Peak USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:02ef]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=07, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f1c00000-f1cfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation Ibex Peak LPC Interface Controller [8086:3b03] (rev 05)
Subsystem: Dell Device [1028:02ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 SATA controller [0106]: Intel Corporation Ibex Peak 6 port SATA AHCI Controller [8086:3b2f] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:02ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 36
Region 0: I/O ports at 6e70 [size=8]
Region 1: I/O ports at 6e78 [size=4]
Region 2: I/O ports at 6e80 [size=8]
Region 3: I/O ports at 6e88 [size=4]
Region 4: I/O ports at 6ea0 [size=32]
Region 5: Memory at fed1e000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation Ibex Peak SMBus Controller [8086:3b30] (rev 05)
Subsystem: Dell Device [1028:02ef]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 0: Memory at f6ffb000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1100 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:00.0 VGA compatible controller [0300]: nVidia Corporation Device [10de:061d] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:02ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f2000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at df00 [size=128]
[virtual] Expansion ROM at f6e00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia, nvidiafb
03:01.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039]
Subsystem: Dell Device [1028:02ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f1c00000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
Memory window 0: f0400000-f07ff000 (prefetchable)
Memory window 1: f0800000-f0bff000
I/O window 0: 00002000-000020ff
I/O window 1: 00002400-000024ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
03:01.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a] (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:02ef]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f1cf9000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f1cfc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
03:01.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]
Subsystem: Dell Device [1028:02ef]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f1cfa000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: tifm_7xx1
Kernel modules: tifm_7xx1
03:01.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c] (prog-if 01)
Subsystem: Dell Device [1028:02ef]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f1cfb000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci-pci
09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5761e Gigabit Ethernet PCIe [14e4:1680] (rev 10)
Subsystem: Dell Device [1028:02ef]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 37
Region 0: Memory at f1de0000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at f1df0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
** USB devices:
Bus 002 Device 004: ID 05dc:ea00 Lexar Media, Inc.
Bus 002 Device 003: ID 046d:c016 Logitech, Inc. M-UV69a/HP M-UV96 Optical Wheel Mouse
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0a5c:5800 Broadcom Corp. BCM5880 Secure Applications Processor
Bus 001 Device 003: ID 0c45:63fa Microdia
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 5.0.4
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-bpo.3-amd64 (SMP w/8 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-bpo.3-amd64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-bpo.3-amd64 recommends:
ii firmware-linux-free 2.6.32-9~bpo50+1 Binary firmware for various driver
Versions of packages linux-image-2.6.32-bpo.3-amd64 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-bpo.3-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
* linux-image-2.6.32-bpo.3-amd64/postinst/missing-firmware-2.6.32-bpo.3-amd64:
linux-image-2.6.32-bpo.3-amd64/postinst/bootloader-test-error-2.6.32-bpo.3-amd64:
linux-image-2.6.32-bpo.3-amd64/postinst/depmod-error-initrd-2.6.32-bpo.3-amd64: false
linux-image-2.6.32-bpo.3-amd64/prerm/removing-running-kernel-2.6.32-bpo.3-amd64: true
linux-image-2.6.32-bpo.3-amd64/prerm/would-invalidate-boot-loader-2.6.32-bpo.3-amd64: true
linux-image-2.6.32-bpo.3-amd64/postinst/bootloader-error-2.6.32-bpo.3-amd64:
--- End Message ---