[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#516705: marked as done (linux-image-2.6.26-1-686: tulip_stop_rxtx() failed, problem tulip <--> dmfe)

Your message dated Tue, 4 Jun 2013 00:30:38 +0200
with message-id <20130603223038.GE5604@pisco.westfalen.local>
and subject line Closing
has caused the Debian Bug report #516705,
regarding linux-image-2.6.26-1-686: tulip_stop_rxtx() failed, problem tulip <--> dmfe
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
516705: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=516705
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: linux-image-2.6.26-1-686
Version: 2.6.26-13
Severity: normal


Hi,

after I upgraded one of my DSL gateways from Debian Etch to Lenny 
one of the network cards did not work properly any longer, syslog
was reporting this constantly (roughly every 3 seconds) ...

0000:02:0b.0: tulip_stop_rxtx() failed (CSR5 0xfc740000 CSR6 0x20422c2)

....and the network on this network card was down. Both modules - dmfe and 
tulip - were loaded by the system automatically. After manually removing
both and loading just "dmfe" the network card worked again as expected.

kind regards, Joerg.


-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009

** Command line:
root=/dev/hda2 ro 

** Not tainted

** Loaded modules:
Module                  Size  Used by
dmfe                   16536  0 
act_police              4676  1 
cls_u32                 6116  1 
sch_ingress             2144  1 
cls_fw                  3840  4 
sch_htb                13248  1 
ipt_MASQUERADE          2592  2 
ipt_LOG                 5028  2 
xt_limit                2180  3 
xt_length               1760  2 
xt_MARK                 2304  12 
xt_multiport            2816  6 
xt_state                2016  3 
iptable_mangle          2688  1 
iptable_nat             4680  1 
nf_nat                 15576  2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4      12268  6 iptable_nat,nf_nat
nf_conntrack           55508  5 ipt_MASQUERADE,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4
xt_TCPMSS               3616  0 
xt_tcpmss               1984  0 
xt_tcpudp               2816  10 
iptable_filter          2624  1 
ip_tables              10160  3 iptable_mangle,iptable_nat,iptable_filter
x_tables               13284  12 ipt_MASQUERADE,ipt_LOG,xt_limit,xt_length,xt_MARK,xt_multiport,xt_state,iptable_nat,xt_TCPMSS,xt_tcpmss,xt_tcpudp,ip_tables
ppp_deflate             4224  0 
zlib_deflate           17624  1 ppp_deflate
zlib_inflate           14144  1 ppp_deflate
bsd_comp                4864  0 
nfsd                  186704  17 
auth_rpcgss            33952  1 nfsd
exportfs                3904  1 nfsd
nfs                   213896  0 
lockd                  54248  2 nfsd,nfs
nfs_acl                 2912  2 nfsd,nfs
sunrpc                162144  13 nfsd,auth_rpcgss,nfs,lockd,nfs_acl
ppp_async               7488  1 
crc_ccitt               2080  1 ppp_async
ppp_generic            20028  7 ppp_deflate,bsd_comp,ppp_async
slhc                    5408  1 ppp_generic
ipv6                  235300  28 
dm_snapshot            14340  0 
dm_mirror              15104  0 
dm_log                  8452  1 dm_mirror
dm_mod                 46184  3 dm_snapshot,dm_mirror,dm_log
asb100                 14996  0 
hwmon_vid               2720  1 asb100
ide_generic             2464  0 [permanent]
evdev                   8000  0 
snd_cmipci             28992  0 
gameport               10700  1 snd_cmipci
snd_opl3_lib            9344  1 snd_cmipci
snd_hwdep               6212  1 snd_opl3_lib
snd_mpu401_uart         6368  1 snd_cmipci
snd_rawmidi            18496  1 snd_mpu401_uart
snd_seq_device          6380  2 snd_opl3_lib,snd_rawmidi
parport_pc             22500  0 
parport                30988  1 parport_pc
snd_pcsp                8576  0 
snd_pcm                62596  2 snd_cmipci,snd_pcsp
snd_timer              17800  2 snd_opl3_lib,snd_pcm
snd                    45604  9 snd_cmipci,snd_opl3_lib,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_pcsp,snd_pcm,snd_timer
soundcore               6368  1 snd
snd_page_alloc          7816  1 snd_pcm
i2c_i801                7920  0 
i2c_core               19828  2 asb100,i2c_i801
iTCO_wdt                9508  0 
shpchp                 25528  0 
pci_hotplug            23460  1 shpchp
rng_core                3940  0 
intel_agp              22332  1 
agpgart                28776  1 intel_agp
ext3                  105512  1 
jbd                    39444  1 ext3
mbcache                 7108  1 ext3
ide_cd_mod             27652  0 
cdrom                  30176  1 ide_cd_mod
ide_disk               10496  3 
piix                    6568  0 [permanent]
floppy                 47716  0 
ide_pci_generic         3908  0 [permanent]
uhci_hcd               18672  0 
ide_core               96168  5 ide_generic,ide_cd_mod,ide_disk,piix,ide_pci_generic
ata_generic             4676  0 
8139too                20320  0 
usbcore               118160  2 uhci_hcd
8139cp                 16800  0 
mii                     4896  2 8139too,8139cp
libata                140384  1 ata_generic
scsi_mod              129356  1 libata
dock                    8304  1 libata
thermal_sys            10856  0 

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge [8086:1a30] (rev 04)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8070]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [e4] Vendor Specific Information <?>
	Capabilities: [a0] AGP version 2.0
		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
	Kernel driver in use: agpgart-intel
	Kernel modules: intel-agp

00:01.0 PCI bridge [0604]: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge [8086:1a31] (rev 04) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: f4800000-f5dfffff
	Prefetchable memory behind bridge: f5f00000-f7ffffff
	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Kernel modules: shpchp

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 05) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
	I/O behind bridge: 0000b000-0000dfff
	Memory behind bridge: f3000000-f47fffff
	Prefetchable memory behind bridge: f5e00000-f5efffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR+
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Kernel modules: shpchp

00:1f.0 ISA bridge [0601]: Intel Corporation 82801BA ISA Bridge (LPC) [8086:2440] (rev 05)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Kernel modules: iTCO_wdt, intel-rng

00:1f.1 IDE interface [0101]: Intel Corporation 82801BA IDE U100 Controller [8086:244b] (rev 05) (prog-if 80 [Master])
	Subsystem: ASUSTeK Computer Inc. Device [1043:8028]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
	Region 4: I/O ports at a800 [size=16]
	Kernel driver in use: PIIX_IDE
	Kernel modules: piix

00:1f.2 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB Controller #1 [8086:2442] (rev 05) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:8028]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 10
	Region 4: I/O ports at a400 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1f.3 SMBus [0c05]: Intel Corporation 82801BA/BAM SMBus Controller [8086:2443] (rev 05)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8028]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 11
	Region 4: I/O ports at e800 [size=16]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c-i801

00:1f.4 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB Controller #1 [8086:2444] (rev 05) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:8028]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 9
	Region 4: I/O ports at a000 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

01:00.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G400/G450 [102b:0525] (rev 82) (prog-if 00 [VGA controller])
	Subsystem: Matrox Graphics, Inc. Millennium G450 Dual Head LE [102b:07c0]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (4000ns min, 8000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at f6000000 (32-bit, prefetchable) [size=32M]
	Region 1: Memory at f5000000 (32-bit, non-prefetchable) [size=16K]
	Region 2: Memory at f4800000 (32-bit, non-prefetchable) [size=8M]
	Expansion ROM at f5fe0000 [disabled] [size=128K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [f0] AGP version 2.0
		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
		Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
	Kernel modules: matrox_w1, matroxfb_base

02:03.0 Multimedia audio controller [0401]: C-Media Electronics Inc CM8738 [13f6:0111] (rev 10)
	Subsystem: ASUSTeK Computer Inc. CMI8738 6ch-MX [1043:80e2]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (500ns min, 6000ns max)
	Interrupt: pin A routed to IRQ 5
	Region 0: I/O ports at d800 [size=256]
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: C-Media PCI
	Kernel modules: snd-cmipci

02:0b.0 Ethernet controller [0200]: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet [1282:9102] (rev 31)
	Subsystem: Device [3030:5032]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
	Latency: 32 (5000ns min, 10000ns max)
	Interrupt: pin A routed to IRQ 9
	Region 0: I/O ports at d400 [size=256]
	Region 1: Memory at f4000000 (32-bit, non-prefetchable) [size=256]
	[virtual] Expansion ROM at f5e00000 [disabled] [size=256K]
	Capabilities: [50] Power Management version 1
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: dmfe
	Kernel modules: tulip, dmfe

02:0c.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
	Subsystem: Realtek Semiconductor Co., Ltd. RT8139 [10ec:8139]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
	Latency: 32 (8000ns min, 16000ns max)
	Interrupt: pin A routed to IRQ 12
	Region 0: I/O ports at d000 [size=256]
	Region 1: Memory at f3800000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: 8139too
	Kernel modules: 8139cp, 8139too

02:0d.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
	Subsystem: Realtek Semiconductor Co., Ltd. RT8139 [10ec:8139]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
	Latency: 32 (8000ns min, 16000ns max)
	Interrupt: pin A routed to IRQ 5
	Region 0: I/O ports at b800 [size=256]
	Region 1: Memory at f3000000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: 8139too
	Kernel modules: 8139cp, 8139too



-- System Information:
Debian Release: 5.0
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-1-686 depends on:
ii  debconf [debconf-2.0]         1.5.24     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.92o      tools for generating an initramfs
ii  module-init-tools             3.4-1      tools for managing Linux kernel mo

Versions of packages linux-image-2.6.26-1-686 recommends:
pn  libc6-i686                    <none>     (no description available)

Versions of packages linux-image-2.6.26-1-686 suggests:
ii  grub                       0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn  linux-doc-2.6.26           <none>        (no description available)

-- debconf information:
  linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
  linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
  linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
  linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
  linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
  linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
  linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
  linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
  linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
  linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
  linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
  linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
  linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
  linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
  linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
  linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
  linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
  linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
  linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:

--- End Message ---
--- Begin Message --- 
Hi,
your bug has been filed against the "linux-2.6" source package and was filed for
a kernel older than the recently released Debian 7.0 / Wheezy with a severity
less than important.

We don't have the ressources to reproduce the complete backlog of all older kernel
bugs, so we're closing this bug for now. If you can reproduce the bug with Debian Wheezy
or a more recent kernel from testing or unstable, please reopen the bug by sending
a mail to control@bugs.debian.org with the following three commands included in the
mail:

reopen BUGNUMBER
reassign BUGNUMBER src:linux
thanks

Cheers,
        Moritz

--- End Message ---
Reply to: