--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: acpi-support: brightness control on laptops doesn't work
- From: Рушан <rush1503@gmail.com>
- Date: Wed, 21 Jan 2009 09:09:44 +0300
- Message-id: <4976BC28.8060602@gmail.com>
Package: acpi-support
Version: 0.109-10
Severity: important
Brightness control on my Debian Lenny laptop doesn't work. When i press
button for descresing brightness it works, but when i try to increase
brightness it become brightly and in next second return to previous
bright level. My lap is fujitsu siemens esprimo mobile u9200.
In the end are dmesg, lspci and packages related to acpi-suppoprt. Also
i want to say, that on my friends laptop (he's got another model, sorry
i don't remember exactly the model) also brightness control trouble. He
can control it, but in linux only 10 steps of control, instead 10 in
windows. His lspci and dmesg also attached.
My (F-S) dmesg (in the end you can see, i try to change brightness) and
lspci
DMESG
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13)
(waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian
4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f680000 (usable)
[ 0.000000] BIOS-e820: 000000007f680000 - 000000007f690000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f690000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 1142MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at [c00f77c0] 000f77c0
[ 0.000000] Entering add_active_range(0, 0, 521856) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 521856
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 521856
[ 0.000000] On node 0 totalpages: 521856
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2285 pages used for memmap
[ 0.000000] HighMem zone: 290195 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F7730, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT 7F687300, 0094 (r1 FSC PC 6040000
LTP 0)
[ 0.000000] ACPI: FACP 7F68EB96, 00F4 (r3 INTEL CRESTLNE 6040000
ALAN 1)
[ 0.000000] ACPI: DSDT 7F688650, 64D2 (r2 IEC___ S11_____ 6040000
INTL 20050624)
[ 0.000000] ACPI: FACS 7F68FFC0, 0040
[ 0.000000] ACPI: APIC 7F68EC8A, 0068 (r1 INTEL CRESTLNE 6040000
LOHR 5A)
[ 0.000000] ACPI: HPET 7F68ECF2, 0038 (r1 INTEL CRESTLNE 6040000
LOHR 5A)
[ 0.000000] ACPI: MCFG 7F68ED2A, 003C (r1 INTEL CRESTLNE 6040000
LOHR 5A)
[ 0.000000] ACPI: SLIT 7F68ED66, 003C (r1 INTEL CRESTLNE 6040000
LOHR 5A)
[ 0.000000] ACPI: TCPA 7F68EDA2, 0032 (r1 Intel CRESTLN
6040000 5A52)
[ 0.000000] ACPI: TMOR 7F68EDD4, 0026 (r1 PTLTD 6040000
PTL 3)
[ 0.000000] ACPI: SLIC 7F68EDFA, 0176 (r1 FSC PC 6040000
PTL_ 0)
[ 0.000000] ACPI: APIC 7F68EF70, 0068 (r1 PTLTD APIC
6040000 LTP 0)
[ 0.000000] ACPI: BOOT 7F68EFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000
LTP 1)
[ 0.000000] ACPI: SSDT 7F688373, 02DD (r1 SataRe SataAhci 1000
INTL 20050624)
[ 0.000000] ACPI: SSDT 7F687920, 025F (r1 PmRef Cpu0Tst 3000
INTL 20050624)
[ 0.000000] ACPI: SSDT 7F68787A, 00A6 (r1 PmRef Cpu1Tst 3000
INTL 20050624)
[ 0.000000] ACPI: SSDT 7F687394, 04E6 (r1 PmRef CpuPm 3000
INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify
linux-acpi@vger.kernel.org
[ 0.000000] ACPI: DMI detected: Fujitsu Siemens
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap:
80000000:60000000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 -
0000000000100000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 2
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 517779
[ 0.000000] Kernel command line: root=/dev/sda4 ro
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Detected 1662.619 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.004000] Memory: 2058736k/2087424k available (1769k kernel code,
27440k reserved, 752k data, 244k init, 1169920k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02ba4ab - 0xc0376620 ( 752 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02ba4ab (1769 kB)
[ 0.004000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084051] Calibrating delay using timer specific routine.. 3328.92
BogoMIPS (lpj=6657858)
[ 0.084201] Security Framework initialized
[ 0.084263] SELinux: Disabled at boot.
[ 0.084320] Capability LSM initialized
[ 0.084388] Mount-cache hash table entries: 512
[ 0.084599] Initializing cgroup subsys ns
[ 0.084658] Initializing cgroup subsys cpuacct
[ 0.084716] Initializing cgroup subsys devices
[ 0.084793] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.084888] CPU: L2 cache: 2048K
[ 0.084945] CPU: Physical Processor ID: 0
[ 0.085001] CPU: Processor Core ID: 0
[ 0.085058] Intel machine check architecture supported.
[ 0.085118] Intel machine check reporting enabled on CPU#0.
[ 0.085177] using mwait in idle threads.
[ 0.085242] Checking 'hlt' instruction... OK.
[ 0.101387] ACPI: Core revision 20080321
[ 0.116007] ENABLING IO-APIC IRQs
[ 0.116007] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.155735] CPU0: Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz
stepping 0d
[ 0.156009] Booting processor 1/1 ip 6000
[ 0.164010] Initializing CPU#1
[ 0.164010] Calibrating delay using timer specific routine.. 3325.17
BogoMIPS (lpj=6650351)
[ 0.164010] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.164010] CPU: L2 cache: 2048K
[ 0.164010] CPU: Physical Processor ID: 0
[ 0.164010] CPU: Processor Core ID: 1
[ 0.164010] Intel machine check architecture supported.
[ 0.164010] Intel machine check reporting enabled on CPU#1.
[ 0.244015] CPU1: Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz
stepping 0d
[ 0.244015] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.248015] Brought up 2 CPUs
[ 0.248015] Total of 2 processors activated (6654.10 BogoMIPS).
[ 0.248015] CPU0 attaching sched-domain:
[ 0.248015] domain 0: span 0-1
[ 0.248015] groups: 0 1
[ 0.248015] CPU1 attaching sched-domain:
[ 0.248015] domain 0: span 0-1
[ 0.248015] groups: 1 0
[ 0.248015] net_namespace: 660 bytes
[ 0.248015] Booting paravirtualized kernel on bare hardware
[ 0.248015] NET: Registered protocol family 16
[ 0.248015] ACPI: bus type pci registered
[ 0.248015] PCI: MCFG configuration 0: base e0000000 segment 0 buses
0 - 255
[ 0.248015] PCI: MCFG area at e0000000 reserved in E820
[ 0.248015] PCI: Using MMCONFIG for extended config space
[ 0.248015] PCI: Using configuration type 1 for base access
[ 0.248015] Setting up standard PCI resources
[ 0.252015] ACPI: EC: Look up EC in DSDT
[ 0.255466] ACPI: BIOS _OSI(Linux) query ignored via DMI
[ 0.256016] ACPI: Interpreter enabled
[ 0.256016] ACPI: (supports S0 S3 S4 S5)
[ 0.256016] ACPI: Using IOAPIC for interrupt routing
[ 0.259467] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 0.406385] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.406385] ACPI: EC: driver started in poll mode
[ 0.406385] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.406385] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6
ACPI/GPIO/TCO
[ 0.406385] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6
GPIO
[ 0.407338] PCI: Transparent bridge - 0000:00:1e.0
[ 0.407438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.412710] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.412860] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.413009] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.413178] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.427265] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12
14 15)
[ 0.427265] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12
14 15) *10
[ 0.427265] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12
14 15)
[ 0.427913] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12
14 15)
[ 0.428557] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12
14 15) *0, disabled.
[ 0.430794] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12
14 15)
[ 0.431438] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12
14 15) *0, disabled.
[ 0.432176] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12
14 15) *10
[ 0.432767] ACPI: Power Resource [FN00] (on)
[ 0.432998] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.436768] pnp: PnP ACPI init
[ 0.436768] ACPI: bus type pnp registered
[ 0.548773] pnp: PnP ACPI: found 12 devices
[ 0.548773] ACPI: ACPI bus type pnp unregistered
[ 0.548773] PnPBIOS: Disabled by ACPI PNP
[ 0.552773] PCI: Using ACPI for IRQ routing
[ 0.556316] ACPI: RTC can wake from S4
[ 0.560274] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not
be reserved
[ 0.560774] system 00:01: iomem range 0xfed14000-0xfed17fff could not
be reserved
[ 0.560774] system 00:01: iomem range 0xfed18000-0xfed18fff could not
be reserved
[ 0.560774] system 00:01: iomem range 0xfed19000-0xfed19fff could not
be reserved
[ 0.560774] system 00:01: iomem range 0xe0000000-0xefffffff could not
be reserved
[ 0.560774] system 00:01: iomem range 0xfed20000-0xfed3ffff could not
be reserved
[ 0.560774] system 00:01: iomem range 0xfed40000-0xfed44fff could not
be reserved
[ 0.560774] system 00:01: iomem range 0xfed45000-0xfed8ffff could not
be reserved
[ 0.560774] system 00:05: ioport range 0x200-0x20f has been reserved
[ 0.560774] system 00:05: ioport range 0x400-0x40f has been reserved
[ 0.560774] system 00:05: ioport range 0x680-0x69f has been reserved
[ 0.560774] system 00:05: ioport range 0x800-0x80f has been reserved
[ 0.560774] system 00:05: ioport range 0x1000-0x107f has been reserved
[ 0.560774] system 00:05: ioport range 0x1180-0x11bf has been reserved
[ 0.560774] system 00:05: ioport range 0x1640-0x164f has been reserved
[ 0.560774] system 00:05: ioport range 0xfe00-0xfe00 has been reserved
[ 0.560774] system 00:06: ioport range 0x6a0-0x6af has been reserved
[ 0.560774] system 00:06: ioport range 0x6b0-0x6ff has been reserved
[ 0.593332] PCI: Bridge: 0000:00:1c.0
[ 0.593391] IO window: 2000-2fff
[ 0.593451] MEM window: 0xf6000000-0xf7ffffff
[ 0.593511] PREFETCH window: 0x00000000f0000000-0x00000000f1ffffff
[ 0.593577] PCI: Bridge: 0000:00:1c.1
[ 0.593634] IO window: 3000-3fff
[ 0.593694] MEM window: 0xf8000000-0xf9ffffff
[ 0.593754] PREFETCH window: 0x00000000f2000000-0x00000000f3ffffff
[ 0.593819] PCI: Bridge: 0000:00:1c.2
[ 0.593876] IO window: 4000-4fff
[ 0.593936] MEM window: 0xfa000000-0xfbffffff
[ 0.593996] PREFETCH window: 0x00000000f4000000-0x00000000f5ffffff
[ 0.594061] PCI: Bridge: 0000:00:1e.0
[ 0.594117] IO window: disabled.
[ 0.596899] MEM window: disabled.
[ 0.596957] PREFETCH window: disabled.
[ 0.597040] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.597103] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level,
low) -> IRQ 17
[ 0.597220] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.597245] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level,
low) -> IRQ 16
[ 0.597359] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.597383] pci 0000:00:1c.2: enabling device (0000 -> 0003)
[ 0.597444] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level,
low) -> IRQ 18
[ 0.597560] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.597574] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.597602] NET: Registered protocol family 2
[ 0.611657] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[ 0.611959] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.612442] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.612727] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.612788] TCP reno registered
[ 0.615670] NET: Registered protocol family 1
[ 0.615841] checking if image is initramfs... it is
[ 1.094862] Switched to high resolution mode on CPU 1
[ 1.098822] Switched to high resolution mode on CPU 0
[ 1.258025] Freeing initrd memory: 6953k freed
[ 1.258025] Simple Boot Flag at 0x36 set to 0x1
[ 1.258025] audit: initializing netlink socket (disabled)
[ 1.258025] type=2000 audit(1232491338.240:1): initialized
[ 1.258025] highmem bounce pool size: 64 pages
[ 1.258025] Total HugeTLB memory allocated, 0
[ 1.258025] VFS: Disk quotas dquot_6.5.1
[ 1.258025] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.258025] msgmni has been set to 1751
[ 1.258025] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 1.258025] io scheduler noop registered
[ 1.258025] io scheduler anticipatory registered
[ 1.258025] io scheduler deadline registered
[ 1.258025] io scheduler cfq registered (default)
[ 1.258025] pci 0000:00:02.0: Boot video device
[ 1.258025] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.258025] assign_interrupt_mode Found MSI capability
[ 1.258025] Allocate Port Service[0000:00:1c.0:pcie00]
[ 1.258025] Allocate Port Service[0000:00:1c.0:pcie02]
[ 1.258025] Allocate Port Service[0000:00:1c.0:pcie03]
[ 1.258025] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 1.258025] assign_interrupt_mode Found MSI capability
[ 1.258025] Allocate Port Service[0000:00:1c.1:pcie00]
[ 1.258025] Allocate Port Service[0000:00:1c.1:pcie02]
[ 1.258025] Allocate Port Service[0000:00:1c.1:pcie03]
[ 1.258025] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 1.258025] assign_interrupt_mode Found MSI capability
[ 1.258025] Allocate Port Service[0000:00:1c.2:pcie00]
[ 1.258025] Allocate Port Service[0000:00:1c.2:pcie02]
[ 1.258025] Allocate Port Service[0000:00:1c.2:pcie03]
[ 1.262027] isapnp: Scanning for PnP cards...
[ 1.613070] isapnp: No Plug & Play device found
[ 1.618025] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 1.618026] brd: module loaded
[ 1.618026] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 1.621747] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.624174] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.624238] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.624300] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.624361] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.624423] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.626062] mice: PS/2 mouse device common for all mice
[ 1.626062] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.626062] rtc0: alarms up to one month, y3k
[ 1.626062] cpuidle: using governor ladder
[ 1.626062] cpuidle: using governor menu
[ 1.626062] No iBFT detected.
[ 1.626062] TCP cubic registered
[ 1.626062] NET: Registered protocol family 17
[ 1.626062] Using IPI No-Shortcut mode
[ 1.626062] registered taskstats version 1
[ 1.626276] rtc_cmos 00:07: setting system clock to 2009-01-20
22:42:19 UTC (1232491339)
[ 1.626486] Freeing unused kernel memory: 244k freed
[ 1.662012] input: AT Translated Set 2 keyboard as /class/input/input0
[ 1.717844] ACPI: PNP0C0B:00 is registered as cooling_device0
[ 1.717844] ACPI: Fan [FAN0] (on)
[ 1.724028] ACPI: SSDT 7F6880B5, 01F6 (r1 PmRef Cpu0Ist 3000
INTL 20050624)
[ 1.724028] ACPI: SSDT 7F687B7F, 04B1 (r1 PmRef Cpu0Cst 3001
INTL 20050624)
[ 1.724028] Monitor-Mwait will be used to enter C-1 state
[ 1.724028] Monitor-Mwait will be used to enter C-2 state
[ 1.724028] Monitor-Mwait will be used to enter C-3 state
[ 1.728028] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.728028] ACPI: ACPI0007:00 is registered as cooling_device1
[ 1.728028] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.728028] ACPI: SSDT 7F6882AB, 00C8 (r1 PmRef Cpu1Ist 3000
INTL 20050624)
[ 1.728028] ACPI: SSDT 7F688030, 0085 (r1 PmRef Cpu1Cst 3000
INTL 20050624)
[ 1.728028] Marking TSC unstable due to: TSC halts in idle.
[ 1.732028] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 1.732028] ACPI: ACPI0007:01 is registered as cooling_device2
[ 1.732028] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.733084] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 1.733084] ACPI: Thermal Zone [TZ00] (27 C)
[ 1.735752] ACPI: LNXTHERM:02 is registered as thermal_zone1
[ 1.735890] ACPI: Thermal Zone [TZ01] (25 C)
[ 1.899877] ACPI: ACPI Dock Station Driver
[ 2.034333] usbcore: registered new interface driver usbfs
[ 2.034422] usbcore: registered new interface driver hub
[ 2.034534] usbcore: registered new device driver usb
[ 2.035939] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level,
low) -> IRQ 18
[ 2.036063] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 2.036067] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.036115] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
bus number 1
[ 2.040115] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.040115] PCI: cache line size of 32 is not supported by device
0000:00:1a.7
[ 2.040115] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc406000
[ 2.043174] USB Universal Host Controller Interface driver v3.0
[ 2.052831] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 2.052991] usb usb1: configuration #1 chosen from 1 choice
[ 2.053081] hub 1-0:1.0: USB hub found
[ 2.053143] hub 1-0:1.0: 4 ports detected
[ 2.112115] SCSI subsystem initialized
[ 2.136116] libata version 3.00 loaded.
[ 2.157011] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.157077] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.157150] usb usb1: Product: EHCI Host Controller
[ 2.157209] usb usb1: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
[ 2.157269] usb usb1: SerialNumber: 0000:00:1a.7
[ 2.157407] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 2.157407] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 2.157407] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.157407] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 2
[ 2.157407] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001840
[ 2.157442] usb usb2: configuration #1 chosen from 1 choice
[ 2.157533] hub 2-0:1.0: USB hub found
[ 2.157594] hub 2-0:1.0: 2 ports detected
[ 2.262881] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.262948] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.263021] usb usb2: Product: UHCI Host Controller
[ 2.263080] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 2.263140] usb usb2: SerialNumber: 0000:00:1a.0
[ 2.266746] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level,
low) -> IRQ 21
[ 2.266746] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 2.266746] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.266746] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
bus number 3
[ 2.267639] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001860
[ 2.267639] usb usb3: configuration #1 chosen from 1 choice
[ 2.267639] hub 3-0:1.0: USB hub found
[ 2.267639] hub 3-0:1.0: 2 ports detected
[ 2.370442] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.370512] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.370593] usb usb3: Product: UHCI Host Controller
[ 2.370652] usb usb3: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 2.370712] usb usb3: SerialNumber: 0000:00:1a.1
[ 2.372336] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level,
low) -> IRQ 23
[ 2.372336] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 2.372336] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.372336] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 4
[ 2.375401] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.375401] PCI: cache line size of 32 is not supported by device
0000:00:1d.7
[ 2.375401] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc406400
[ 2.400759] usb 1-2: new high speed USB device using ehci_hcd and
address 2
[ 2.414169] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 2.414345] usb usb4: configuration #1 chosen from 1 choice
[ 2.414446] hub 4-0:1.0: USB hub found
[ 2.414508] hub 4-0:1.0: 6 ports detected
[ 2.517907] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.517976] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.518054] usb usb4: Product: EHCI Host Controller
[ 2.518119] usb usb4: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
[ 2.518187] usb usb4: SerialNumber: 0000:00:1d.7
[ 2.518187] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level,
low) -> IRQ 23
[ 2.518187] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 2.518187] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.518187] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 5
[ 2.518223] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 2.518363] usb usb5: configuration #1 chosen from 1 choice
[ 2.518450] hub 5-0:1.0: USB hub found
[ 2.518511] hub 5-0:1.0: 2 ports detected
[ 2.551329] usb 1-2: configuration #1 chosen from 1 choice
[ 2.552781] usb 1-2: New USB device found, idVendor=05e3, idProduct=0715
[ 2.552781] usb 1-2: New USB device strings: Mfr=3, Product=4,
SerialNumber=2
[ 2.552781] usb 1-2: Product: USB Reader
[ 2.552781] usb 1-2: Manufacturer: Genesys
[ 2.552782] usb 1-2: SerialNumber: 000000009407
[ 2.605344] Clocksource tsc unstable (delta = -236723915 ns)
[ 2.621484] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.621555] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.621628] usb usb5: Product: UHCI Host Controller
[ 2.621686] usb usb5: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 2.621745] usb usb5: SerialNumber: 0000:00:1d.0
[ 2.625319] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level,
low) -> IRQ 19
[ 2.625319] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 2.625319] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.625319] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 6
[ 2.625332] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[ 2.625468] usb usb6: configuration #1 chosen from 1 choice
[ 2.625556] hub 6-0:1.0: USB hub found
[ 2.625617] hub 6-0:1.0: 2 ports detected
[ 2.729320] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.729320] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.729320] usb usb6: Product: UHCI Host Controller
[ 2.729320] usb usb6: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 2.729320] usb usb6: SerialNumber: 0000:00:1d.1
[ 2.729320] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level,
low) -> IRQ 18
[ 2.729320] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 2.729320] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.729320] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 7
[ 2.729320] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 2.729403] usb usb7: configuration #1 chosen from 1 choice
[ 2.729490] hub 7-0:1.0: USB hub found
[ 2.729551] hub 7-0:1.0: 2 ports detected
[ 2.833306] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.833306] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.833306] usb usb7: Product: UHCI Host Controller
[ 2.833306] usb usb7: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 2.833306] usb usb7: SerialNumber: 0000:00:1d.2
[ 2.834186] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level,
low) -> IRQ 17
[ 2.834186] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 2.834186] sky2 0000:04:00.0: v1.21 addr 0xf8000000 irq 17 Yukon-EC
Ultra (0xb4) rev 3
[ 2.834187] sky2 eth0: addr 00:a0:d1:cc:35:a4
[ 2.834186] ahci 0000:00:1f.2: version 3.0
[ 2.834186] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level,
low) -> IRQ 19
[ 2.901598] Initializing USB Mass Storage driver...
[ 2.910836] scsi0 : SCSI emulation for USB Mass Storage devices
[ 2.911011] usbcore: registered new interface driver usb-storage
[ 2.911074] USB Mass Storage support registered.
[ 2.911352] usb-storage: device found at 2
[ 2.911355] usb-storage: waiting for device to settle before scanning
[ 3.835623] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps
0x7 impl SATA mode
[ 3.835709] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum
part
[ 3.835782] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 3.838511] scsi1 : ahci
[ 3.838511] scsi2 : ahci
[ 3.838511] scsi3 : ahci
[ 3.838511] ata1: SATA max UDMA/133 abar m2048@0xfc405000 port
0xfc405100 irq 219
[ 3.838511] ata2: SATA max UDMA/133 abar m2048@0xfc405000 port
0xfc405180 irq 219
[ 3.838511] ata3: SATA max UDMA/133 abar m2048@0xfc405000 port
0xfc405200 irq 219
[ 4.158848] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.158798] ata1.00: _GTF unexpected object type 0x1
[ 4.208883] ata1.00: ATA-8: WDC WD1200BEVS-22UST0, 01.01A01, max UDMA/133
[ 4.208883] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 4.209512] ata1.00: _GTF unexpected object type 0x1
[ 4.209512] ata1.00: configured for UDMA/133
[ 4.527272] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.848489] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.848434] scsi 1:0:0:0: Direct-Access ATA WDC WD1200BEVS-2
01.0 PQ: 0 ANSI: 5
[ 4.855362] Uniform Multi-Platform E-IDE driver
[ 4.855362] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[ 4.855362] ICH8M: IDE controller (0x8086:0x2850 rev 0x03) at PCI
slot 0000:00:1f.1
[ 4.855362] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level,
low) -> IRQ 19
[ 4.856223] ICH8M: not 100% native mode: will probe irqs later
[ 4.856223] ide0: BM-DMA at 0x1830-0x1837
[ 4.856223] ide1: BM-DMA at 0x1838-0x183f
[ 4.856223] Probing IDE interface ide0...
[ 4.868207] Driver 'sd' needs updating - please use bus_type methods
[ 4.868207] sd 1:0:0:0: [sda] 234441648 512-byte hardware sectors
(120034 MB)
[ 4.868207] sd 1:0:0:0: [sda] Write Protect is off
[ 4.868207] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.868207] sd 1:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.868207] sd 1:0:0:0: [sda] 234441648 512-byte hardware sectors
(120034 MB)
[ 4.868207] sd 1:0:0:0: [sda] Write Protect is off
[ 4.868207] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.868207] sd 1:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.868207] sda: sda1 sda2 sda3 sda4
[ 4.945051] sd 1:0:0:0: [sda] Attached SCSI disk
[ 5.594593] hda: TSSTcorp CDDVDW TS-L632H, ATAPI CD/DVD-ROM drive
[ 6.266385] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 6.267709] hda: UDMA/33 mode selected
[ 6.269570] Probing IDE interface ide1...
[ 6.834569] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 6.849914] ide1 at 0x170-0x177,0x376 on irq 15
[ 6.878273] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 6.878273] Uniform CD-ROM driver Revision: 3.20
[ 7.009450] PM: Starting manual resume from disk
[ 7.071273] kjournald starting. Commit interval 5 seconds
[ 7.071273] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.925320] usb-storage: device scan complete
[ 7.927304] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE
9407 PQ: 0 ANSI: 0
[ 7.929261] sd 0:0:0:0: [sdb] Attached SCSI removable disk
[ 9.033442] udevd version 125 started
[ 9.458792] Linux agpgart interface v0.103
[ 9.462178] agpgart: Detected an Intel 965GM Chipset.
[ 9.462178] agpgart: Detected 7676K stolen memory.
[ 9.472913] agpgart: AGP aperture is 256M @ 0xd0000000
[ 9.540387] input: Power Button (FF) as /class/input/input1
[ 9.588962] ACPI: Power Button (FF) [PWRF]
[ 9.589092] input: Lid Switch as /class/input/input2
[ 9.680851] ACPI: Lid Switch [LID0]
[ 9.683001] input: Sleep Button (CM) as /class/input/input3
[ 9.737952] ACPI: Sleep Button (CM) [SLPB]
[ 9.740341] input: Power Button (CM) as /class/input/input4
[ 9.801434] ACPI: Power Button (CM) [PWRB]
[ 10.334598] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 10.335748] iTCO_wdt: Found a ICH8M TCO device (Version=2,
TCOBASE=0x1060)
[ 10.335748] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.466066] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level,
low) -> IRQ 19
[ 10.612514] input: PC Speaker as /class/input/input5
[ 10.967964] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network
Connection driver for Linux, 1.2.26ks
[ 10.967964] iwl3945: Copyright(c) 2003-2008 Intel Corporation
[ 10.967964] iwl3945 0000:06:00.0: enabling device (0104 -> 0106)
[ 10.967964] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level,
low) -> IRQ 18
[ 10.967964] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 10.967964] iwl3945: Detected Intel Wireless WiFi Link 3945ABG
[ 11.029022] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 11.030823] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 11.087348] ACPI: Battery Slot [BAT0] (battery present)
[ 11.142095] ACPI: AC Adapter [ADP1] (off-line)
[ 11.187691] ACPI: PCI interrupt for device 0000:06:00.0 disabled
[ 11.241978] HDA Intel 0000:00:1b.0: enabling device (0104 -> 0106)
[ 11.241978] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 11.241978] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 11.256332] ACPI: Battery Slot [BAT1] (battery absent)
[ 11.256332] ACPI: device:07 is registered as cooling_device3
[ 11.256332] input: Video Bus as /class/input/input6
[ 11.283724] hda_codec: Unknown model for ALC262, trying auto-probe
from BIOS...
[ 11.308319] ACPI: Video Device [GFX0] (multi-head: yes rom: no
post: no)
[ 11.995956] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1,
caps: 0xa04753/0x200000
[ 12.138790] input: SynPS/2 Synaptics TouchPad as /class/input/input7
[ 12.177972] parport_pc 00:09: reported by Plug and Play ACPI
[ 12.177972] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[ 12.670750] Adding 1574360k swap on /dev/sda3. Priority:-1 extents:1
across:1574360k
[ 12.824391] EXT3 FS on sda4, internal journal
[ 13.444214] loop: module loaded
[ 13.748301] fuse init (API version 7.9)
[ 14.166376] FAT: utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
[ 15.447054] sky2 eth0: enabling interface
[ 15.510266] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level,
low) -> IRQ 18
[ 15.510266] PM: Writing back config space on device 0000:06:00.0 at
offset 1 (was 100102, writing 100106)
[ 15.510266] firmware: requesting iwlwifi-3945-1.ucode
[ 15.571615] iwl3945: Radio disabled by HW RF Kill switch
[ 15.571615] ACPI: PCI interrupt for device 0000:06:00.0 disabled
[ 15.571615] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level,
low) -> IRQ 18
[ 15.571615] PM: Writing back config space on device 0000:06:00.0 at
offset 1 (was 100102, writing 100106)
[ 15.571615] iwl3945: Radio disabled by HW RF Kill switch
[ 15.571615] ACPI: PCI interrupt for device 0000:06:00.0 disabled
[ 17.905623] lp0: using parport0 (interrupt-driven).
[ 17.932931] ppdev: user-space parallel port driver
[ 18.927259] NET: Registered protocol family 10
[ 18.927259] lo: Disabled Privacy Extensions
[ 18.927259] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.235855] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level,
low) -> IRQ 18
[ 22.235855] PM: Writing back config space on device 0000:06:00.0 at
offset 1 (was 100102, writing 100106)
[ 22.236069] iwl3945: Radio disabled by HW RF Kill switch
[ 22.238872] ACPI: PCI interrupt for device 0000:06:00.0 disabled
[ 22.600927] warning: `avahi-daemon' uses 32-bit capabilities (legacy
support in use)
[ 25.035805] Bluetooth: Core ver 2.11
[ 25.035867] NET: Registered protocol family 31
[ 25.035928] Bluetooth: HCI device and connection manager initialized
[ 25.036005] Bluetooth: HCI socket layer initialized
[ 25.078543] Bluetooth: L2CAP ver 2.9
[ 25.078543] Bluetooth: L2CAP socket layer initialized
[ 25.332229] Bluetooth: RFCOMM socket layer initialized
[ 25.332229] Bluetooth: RFCOMM TTY layer initialized
[ 25.332229] Bluetooth: RFCOMM ver 1.8
[ 29.339945] [drm] Initialized drm 1.1.0 20060810
[ 29.343933] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 29.343933] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 29.343933] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 30.633309] atkbd.c: Unknown key pressed (translated set 2, code 0x83
on isa0060/serio0).
[ 30.633309] atkbd.c: Use 'setkeycodes e003 <keycode>' to make it known.
[ 30.902621] usb 1-3: new high speed USB device using ehci_hcd and
address 3
[ 31.143451] usb 1-3: configuration #1 chosen from 1 choice
[ 31.145248] usb 1-3: New USB device found, idVendor=05c8, idProduct=0103
[ 31.145248] usb 1-3: New USB device strings: Mfr=2, Product=1,
SerialNumber=3
[ 31.145248] usb 1-3: Product: FO13FF-65-1 PC-CAM
[ 31.145248] usb 1-3: Manufacturer: Foxlink
[ 31.145248] usb 1-3: SerialNumber: 1.09
[ 31.359134] Linux video capture interface: v2.00
[ 31.419184] uvcvideo: Found UVC 1.00 device FO13FF-65-1 PC-CAM
(05c8:0103)
[ 31.423211] input: FO13FF-65-1 PC-CAM as /class/input/input8
[ 31.431208] usbcore: registered new interface driver uvcvideo
[ 31.431208] USB Video Class driver (v0.1.0)
[ 39.662026] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level,
low) -> IRQ 18
[ 39.662324] PM: Writing back config space on device 0000:06:00.0 at
offset 1 (was 100102, writing 100106)
[ 39.664411] iwl3945: Radio disabled by HW RF Kill switch
[ 39.664411] ACPI: PCI interrupt for device 0000:06:00.0 disabled
[ 46.891748] usb 3-2: new full speed USB device using uhci_hcd and
address 2
[ 47.086216] usb 3-2: configuration #1 chosen from 1 choice
[ 47.089796] usb 3-2: New USB device found, idVendor=0a12, idProduct=0001
[ 47.089874] usb 3-2: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 47.375765] Bluetooth: HCI USB driver ver 2.9
[ 47.378170] usbcore: registered new interface driver hci_usb
[ 55.848764] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level,
low) -> IRQ 18
[ 55.848764] PM: Writing back config space on device 0000:06:00.0 at
offset 1 (was 100102, writing 100106)
[ 55.898911] Registered led device: iwl-phy0:radio
[ 55.898911] Registered led device: iwl-phy0:assoc
[ 55.898932] Registered led device: iwl-phy0:RX
[ 55.899027] Registered led device: iwl-phy0:TX
[ 55.924715] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 76.512936] wlan0: Initial auth_alg=0
[ 76.512936] wlan0: authenticate with AP 00:13:10:f1:ef:0a
[ 76.513978] wlan0: RX authentication from 00:13:10:f1:ef:0a (alg=0
transaction=2 status=0)
[ 76.513978] wlan0: authenticated
[ 76.513978] wlan0: associate with AP 00:13:10:f1:ef:0a
[ 76.516362] wlan0: RX AssocResp from 00:13:10:f1:ef:0a (capab=0x461
status=0 aid=1)
[ 76.516362] wlan0: associated
[ 76.516362] wlan0: CTS protection enabled (BSSID=00:13:10:f1:ef:0a)
[ 76.516362] wlan0: switched to short barker preamble
(BSSID=00:13:10:f1:ef:0a)
[ 76.516362] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 87.243451] wlan0: no IPv6 routers present
[ 94.409790] RPC: Registered udp transport module.
[ 94.409790] RPC: Registered tcp transport module.
[ 108.727313] sky2 eth0: disabling interface
[ 112.801555] wlan0: Initial auth_alg=0
[ 112.801555] wlan0: authenticate with AP 00:13:10:f1:ef:0a
[ 112.801555] wlan0: RX authentication from 00:13:10:f1:ef:0a (alg=0
transaction=2 status=0)
[ 112.801555] wlan0: authenticated
[ 112.801555] wlan0: associate with AP 00:13:10:f1:ef:0a
[ 112.802776] wlan0: RX ReassocResp from 00:13:10:f1:ef:0a (capab=0x461
status=0 aid=1)
[ 112.802785] wlan0: associated
[ 206.995245] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 302.929680] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 304.640776] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 305.680817] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 306.721625] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 308.143430] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 308.991873] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 309.940043] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 310.499174] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 310.680760] ACPI: EC: non-query interrupt received, switching to
interrupt mode#(here i pressed increasing brightness button)
[ 310.946694] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 311.320053] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 319.164362] __ratelimit: 1 messages suppressed #(here i pressed
decreasing brightness button)
[ 319.164362] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 321.928470] ACPI: EC: non-query interrupt received, switching to
interrupt mode
LSPCI
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory
Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 3 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface
Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E)
IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E)
SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller
(rev 03)
04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E
Gigabit Ethernet Controller (rev 14)
06:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG
[Golan] Network Connection (rev 02)
Also my laptop configuration:
-- System Information:
Debian Release: 5.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages acpi-support depends on:
ii acpi-support-base 0.109-10 scripts for handling base
ACPI eve
ii acpid 1.0.8-1 Utilities for using ACPI
power man
ii dmidecode 2.9-1 Dump Desktop Management
Interface
ii finger 0.17-12 user information lookup program
ii hdparm 8.9-3 tune hard disk parameters
for high
ii laptop-detect 0.13.6 attempt to detect a laptop
ii libc6 2.7-18 GNU C Library: Shared libraries
ii lsb-base 3.2-20 Linux Standard Base 3.2
init scrip
ii powermgmt-base 1.30 Common utils and configs
for power
ii vbetool 1.0-3 run real-mode video BIOS
code to a
ii x11-xserver-utils 7.3+5 X server utilities
Versions of packages acpi-support recommends:
ii dbus 1.2.1-5 simple interprocess
messaging syst
ii hal 0.5.11-8 Hardware Abstraction Layer
ii nvclock 0.8b3-1 Allows you to overclock
your nVidi
ii pm-utils 1.1.2.4-1 utilities and scripts for
power ma
ii radeontool 1.5-5 utility to control ATI
Radeon back
ii toshset 1.73-3 Access much of the Toshiba
laptop
Versions of packages acpi-support suggests:
pn laptop-mode-tools <none> (no description available)
Friend's laptop dmesg and lspci:
DMESG
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 522192
[ 0.000000] On node 0 totalpages: 522192
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2288 pages used for memmap
[ 0.000000] HighMem zone: 290528 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000F7C00, 0024 (r2 HP )
[ 0.000000] ACPI: XSDT 7F7E57C4, 0074 (r1 HPQOEM SLIC-MPC 1
HP 1)
[ 0.000000] ACPI: FACP 7F7E5684, 00F4 (r4 HP 30A2 3
HP 1)
[ 0.000000] ACPI: DSDT 7F7E5AC0, F9C8 (r1 HP nx7400 10000
MSFT 100000E)
[ 0.000000] ACPI: FACS 7F7F7E80, 0040
[ 0.000000] ACPI: SLIC 7F7E5838, 0176 (r1 HPQOEM SLIC-MPC 1
HP 1)
[ 0.000000] ACPI: HPET 7F7E59B0, 0038 (r1 HP 30A2 1
HP 1)
[ 0.000000] ACPI: APIC 7F7E59E8, 0068 (r1 HP 30A2 1
HP 1)
[ 0.000000] ACPI: MCFG 7F7E5A50, 003C (r1 HP 30A2 1
HP 1)
[ 0.000000] ACPI: TCPA 7F7E5A8C, 0032 (r2 HP 30A2 1
HP 1)
[ 0.000000] ACPI: SSDT 7F7F5488, 0326 (r1 HP HPQSAT 1
MSFT 100000E)
[ 0.000000] ACPI: SSDT 7F7F57AE, 04CB (r1 HP Cpu0Cst 3001
INTL 20060317)
[ 0.000000] ACPI: SSDT 7F7F5C79, 025F (r1 HP Cpu0Tst 3000
INTL 20060317)
[ 0.000000] ACPI: SSDT 7F7F5ED8, 04D7 (r1 HP CpuPm 3000
INTL 20060317)
[ 0.000000] ACPI: DMI detected: Hewlett-Packard
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 80000000 (gap:
7f800000:7f400000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 2
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 518112
[ 0.000000] Kernel command line: root=/dev/sda1 ro quiet
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Detected 1729.026 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.004000] Memory: 2059972k/2088768k available (1769k kernel code,
27496k reserved, 752k data, 244k init, 1171264k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02ba4ab - 0xc0376620 ( 752 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02ba4ab (1769 kB)
[ 0.004000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.083957] Calibrating delay using timer specific routine.. 3462.35
BogoMIPS (lpj=6924704)
[ 0.083998] Security Framework initialized
[ 0.084005] SELinux: Disabled at boot.
[ 0.084005] Capability LSM initialized
[ 0.084005] Mount-cache hash table entries: 512
[ 0.084005] Initializing cgroup subsys ns
[ 0.084005] Initializing cgroup subsys cpuacct
[ 0.084005] Initializing cgroup subsys devices
[ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.084005] CPU: L2 cache: 1024K
[ 0.084005] Intel machine check architecture supported.
[ 0.084005] Intel machine check reporting enabled on CPU#0.
[ 0.084005] using mwait in idle threads.
[ 0.084005] Checking 'hlt' instruction... OK.
[ 0.100006] SMP alternatives: switching to UP code
[ 0.104006] ACPI: Core revision 20080321
[ 0.128008] ENABLING IO-APIC IRQs
[ 0.128008] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.167727] CPU0: Intel® Celeron® M CPU 430 @ 1.73GHz stepping 08
[ 0.168010] Brought up 1 CPUs
[ 0.168010] Total of 1 processors activated (3462.35 BogoMIPS).
[ 0.168010] CPU0 attaching sched-domain:
[ 0.168010] domain 0: span 0
[ 0.168010] groups: 0
[ 0.168010] net_namespace: 660 bytes
[ 0.168010] HP Compaq Laptop series board detected. Selecting
BIOS-method for reboots.
[ 0.168010] Booting paravirtualized kernel on bare hardware
[ 0.168010] NET: Registered protocol family 16
[ 0.168010] ACPI: bus type pci registered
[ 0.168010] PCI: MCFG configuration 0: base f8000000 segment 0 buses
0 - 63
[ 0.168010] PCI: Not using MMCONFIG.
[ 0.168010] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32
[ 0.168010] PCI: Using configuration type 1 for base access
[ 0.168010] Setting up standard PCI resources
[ 0.168892] ACPI: EC: Look up EC in DSDT
[ 0.171566] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 0.217550] ACPI: Interpreter enabled
[ 0.217555] ACPI: (supports S0 S3 S4 S5)
[ 0.217568] ACPI: Using IOAPIC for interrupt routing
[ 0.217640] PCI: MCFG configuration 0: base f8000000 segment 0 buses
0 - 63
[ 0.225478] PCI: MCFG area at f8000000 reserved in ACPI motherboard
resources
[ 0.225481] PCI: Using MMCONFIG for extended config space
[ 0.236829] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.236833] ACPI: EC: driver started in interrupt mode
[ 0.236903] ACPI: PCI Root Bridge [C002] (0000:00)
[ 0.237822] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6
ACPI/GPIO/TCO
[ 0.237827] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6
GPIO
[ 0.238585] PCI: Transparent bridge - 0000:00:1e.0
[ 0.238649] ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
[ 0.239098] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C098._PRT]
[ 0.239287] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C104._PRT]
[ 0.239457] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C114._PRT]
[ 0.239627] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C11A._PRT]
[ 0.281448] ACPI: PCI Interrupt Link [C110] (IRQs *10 11)
[ 0.281707] ACPI: PCI Interrupt Link [C111] (IRQs *10 11)
[ 0.281961] ACPI: PCI Interrupt Link [C112] (IRQs 10 *11)
[ 0.282213] ACPI: PCI Interrupt Link [C113] (IRQs *10 11)
[ 0.282468] ACPI: PCI Interrupt Link [C12C] (IRQs *10 11)
[ 0.282715] ACPI: PCI Interrupt Link [C12D] (IRQs 10 11) *0, disabled.
[ 0.282961] ACPI: PCI Interrupt Link [C12E] (IRQs 10 11) *0, disabled.
[ 0.283080] ACPI Exception (pci_link-0184): AE_NOT_FOUND, Evaluating
_PRS [20080321]
[ 0.283453] ACPI: Power Resource [C200] (on)
[ 0.283508] ACPI: Power Resource [C21D] (on)
[ 0.283572] ACPI: Power Resource [C226] (off)
[ 0.283694] ACPI: Power Resource [C320] (off)
[ 0.283809] ACPI: Power Resource [C321] (off)
[ 0.283923] ACPI: Power Resource [C322] (off)
[ 0.284044] ACPI: Power Resource [C323] (off)
[ 0.284334] Linux Plug and Play Support v0.97 © Adam Belay
[ 0.284367] pnp: PnP ACPI init
[ 0.284376] ACPI: bus type pnp registered
[ 0.295040] pnp: PnP ACPI: found 13 devices
[ 0.295043] ACPI: ACPI bus type pnp unregistered
[ 0.295047] PnPBIOS: Disabled by ACPI PNP
[ 0.295304] PCI: Using ACPI for IRQ routing
[ 0.295486] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.295491] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.296552] ACPI: RTC can wake from S4
[ 0.296576] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.296580] system 00:00: iomem range 0xe0000-0xfffff could not be
reserved
[ 0.296583] system 00:00: iomem range 0x100000-0x7f7fffff could not
be reserved
[ 0.296594] system 00:0a: ioport range 0x500-0x57f has been reserved
[ 0.296597] system 00:0a: ioport range 0x800-0x80f has been reserved
[ 0.296601] system 00:0a: iomem range 0xffb00000-0xffbfffff could not
be reserved
[ 0.296605] system 00:0a: iomem range 0xfff00000-0xffffffff could not
be reserved
[ 0.296610] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 0.296614] system 00:0b: ioport range 0x1000-0x107f has been reserved
[ 0.296617] system 00:0b: ioport range 0x1100-0x113f has been reserved
[ 0.296620] system 00:0b: ioport range 0x1200-0x121f has been reserved
[ 0.296623] system 00:0b: iomem range 0xf8000000-0xfbffffff has been
reserved
[ 0.296627] system 00:0b: iomem range 0xfec00000-0xfec000ff could not
be reserved
[ 0.296631] system 00:0b: iomem range 0xfed20000-0xfed3ffff could not
be reserved
[ 0.296634] system 00:0b: iomem range 0xfed45000-0xfed8ffff could not
be reserved
[ 0.296638] system 00:0b: iomem range 0xfed90000-0xfed9afff could not
be reserved
[ 0.296644] system 00:0c: iomem range 0xfeda0000-0xfedbffff could not
be reserved
[ 0.296648] system 00:0c: iomem range 0xfee00000-0xfee00fff could not
be reserved
[ 0.327065] PCI: region 0000:02:06.0/9 too large:
0x0000000000000000-0x0000000003ffffff
[ 0.327074] PCI: Bridge: 0000:00:1c.0
[ 0.327075] IO window: disabled.
[ 0.327081] MEM window: disabled.
[ 0.327086] PREFETCH window: disabled.
[ 0.327093] PCI: Bridge: 0000:00:1c.1
[ 0.327095] IO window: disabled.
[ 0.327101] MEM window: 0xf4000000-0xf40fffff
[ 0.327106] PREFETCH window: disabled.
[ 0.327113] PCI: Bridge: 0000:00:1c.3
[ 0.327116] IO window: 2000-3fff
[ 0.327122] MEM window: 0xf0000000-0xf3ffffff
[ 0.327127] PREFETCH window: disabled.
[ 0.327136] PCI: Bus 3, cardbus bridge: 0000:02:06.0
[ 0.327138] IO window: 0x00005000-0x000050ff
[ 0.327144] IO window: 0x00005400-0x000054ff
[ 0.327149] MEM window: 0x80000000-0x83ffffff
[ 0.327154] PCI: Bridge: 0000:00:1e.0
[ 0.327158] IO window: 5000-5fff
[ 0.327164] MEM window: 0xf4100000-0xf43fffff
[ 0.327168] PREFETCH window: disabled.
[ 0.327203] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 0.327210] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.327235] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level,
low) -> IRQ 17
[ 0.327241] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.327265] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level,
low) -> IRQ 19
[ 0.327271] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.327285] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.327303] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level,
low) -> IRQ 18
[ 0.327334] NET: Registered protocol family 2
[ 0.327429] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[ 0.327674] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.328457] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.328854] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.328858] TCP reno registered
[ 0.329008] NET: Registered protocol family 1
[ 0.329135] checking if image is initramfs...<7>Switched to high
resolution mode on CPU 0
[ 0.636326] it is
[ 0.969171] Freeing initrd memory: 7011k freed
[ 0.969927] audit: initializing netlink socket (disabled)
[ 0.969945] type=2000 audit(1232483928.968:1): initialized
[ 0.970141] highmem bounce pool size: 64 pages
[ 0.970146] Total HugeTLB memory allocated, 0
[ 0.970216] VFS: Disk quotas dquot_6.5.1
[ 0.970244] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.970282] msgmni has been set to 1751
[ 0.970390] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.970395] io scheduler noop registered
[ 0.970397] io scheduler anticipatory registered
[ 0.970399] io scheduler deadline registered
[ 0.970408] io scheduler cfq registered (default)
[ 0.970422] pci 0000:00:02.0: Boot video device
[ 0.970620] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.970667] assign_interrupt_mode Found MSI capability
[ 0.970717] Allocate Port Service[0000:00:1c.0:pcie00]
[ 0.970758] Allocate Port Service[0000:00:1c.0:pcie02]
[ 0.970794] Allocate Port Service[0000:00:1c.0:pcie03]
[ 0.970900] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.970946] assign_interrupt_mode Found MSI capability
[ 0.970991] Allocate Port Service[0000:00:1c.1:pcie00]
[ 0.971028] Allocate Port Service[0000:00:1c.1:pcie02]
[ 0.971064] Allocate Port Service[0000:00:1c.1:pcie03]
[ 0.971169] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.971215] assign_interrupt_mode Found MSI capability
[ 0.971260] Allocate Port Service[0000:00:1c.3:pcie00]
[ 0.971297] Allocate Port Service[0000:00:1c.3:pcie02]
[ 0.971334] Allocate Port Service[0000:00:1c.3:pcie03]
[ 0.971664] isapnp: Scanning for PnP cards...
[ 1.326031] isapnp: No Plug & Play device found
[ 1.328704] hpet_resources: 0xfed00000 is busy
[ 1.328797] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 1.330602] brd: module loaded
[ 1.330698] PNP: PS/2 Controller [PNP0303:C21A,PNP0f13:C21B] at
0x60,0x64 irq 1,12
[ 1.332611] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.333364] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.333369] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.333372] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.333375] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.333378] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.333524] mice: PS/2 mouse device common for all mice
[ 1.333730] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.333754] rtc0: alarms up to one month, y3k
[ 1.333786] cpuidle: using governor ladder
[ 1.333788] cpuidle: using governor menu
[ 1.333793] No iBFT detected.
[ 1.334203] TCP cubic registered
[ 1.334206] NET: Registered protocol family 17
[ 1.334215] Using IPI No-Shortcut mode
[ 1.334394] registered taskstats version 1
[ 1.334543] rtc_cmos 00:06: setting system clock to 2009-01-20
20:38:50 UTC (1232483930)
[ 1.334668] Freeing unused kernel memory: 244k freed
[ 1.365169] input: AT Translated Set 2 keyboard as /class/input/input0
[ 1.425204] ACPI: Transitioning device [C324] to D3
[ 1.425279] ACPI: PNP0C0B:00 is registered as cooling_device0
[ 1.425286] ACPI: Fan [C324] (off)
[ 1.425512] ACPI: Transitioning device [C325] to D3
[ 1.425554] ACPI: PNP0C0B:01 is registered as cooling_device1
[ 1.425559] ACPI: Fan [C325] (off)
[ 1.425783] ACPI: Transitioning device [C326] to D3
[ 1.425821] ACPI: PNP0C0B:02 is registered as cooling_device2
[ 1.425826] ACPI: Fan [C326] (off)
[ 1.426050] ACPI: Transitioning device [C327] to D3
[ 1.426088] ACPI: PNP0C0B:03 is registered as cooling_device3
[ 1.426094] ACPI: Fan [C327] (off)
[ 1.436147] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.436147] ACPI: ACPI0007:00 is registered as cooling_device4
[ 1.436147] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.453198] Marking TSC unstable due to: TSC halts in idle.
[ 1.457995] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 1.460991] ACPI: Thermal Zone [TZ0] (58 C)
[ 1.472005] ACPI: LNXTHERM:02 is registered as thermal_zone1
[ 1.476006] ACPI: Thermal Zone [TZ1] (54 C)
[ 1.486547] ACPI: LNXTHERM:03 is registered as thermal_zone2
[ 1.490562] ACPI: Thermal Zone [TZ2] (47 C)
[ 1.496810] ACPI: LNXTHERM:04 is registered as thermal_zone3
[ 1.502710] ACPI: Thermal Zone [TZ3] (29 C)
[ 1.505275] ACPI: LNXTHERM:05 is registered as thermal_zone4
[ 1.507877] ACPI: Thermal Zone [TZ4] (51 C)
[ 2.073819] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level,
low) -> IRQ 17
[ 2.073831] PCI: Setting latency timer of device 0000:10:00.0 to 64
[ 2.123805] usbcore: registered new interface driver usbfs
[ 2.123835] usbcore: registered new interface driver hub
[ 2.123881] usbcore: registered new device driver usb
[ 2.125075] USB Universal Host Controller Interface driver v3.0
[ 2.132123] ssb: Sonics Silicon Backplane found on PCI device
0000:10:00.0
[ 2.132392] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level,
low) -> IRQ 20
[ 2.132404] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 2.132409] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.132553] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 1
[ 2.132590] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004020
[ 2.132677] usb usb1: configuration #1 chosen from 1 choice
[ 2.132709] hub 1-0:1.0: USB hub found
[ 2.132716] hub 1-0:1.0: 2 ports detected
[ 2.232670] Uniform Multi-Platform E-IDE driver
[ 2.232677] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[ 2.234274] No dock devices found.
[ 2.242287] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.242292] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.242295] usb usb1: Product: UHCI Host Controller
[ 2.242297] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 2.242300] usb usb1: SerialNumber: 0000:00:1d.0
[ 2.242376] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level,
low) -> IRQ 17
[ 2.242387] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 2.242392] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.242417] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 2
[ 2.242456] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00004040
[ 2.242536] usb usb2: configuration #1 chosen from 1 choice
[ 2.242563] hub 2-0:1.0: USB hub found
[ 2.242570] hub 2-0:1.0: 2 ports detected
[ 2.256873] SCSI subsystem initialized
[ 2.292823] libata version 3.00 loaded.
[ 2.344149] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.344154] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.344157] usb usb2: Product: UHCI Host Controller
[ 2.344159] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 2.344162] usb usb2: SerialNumber: 0000:00:1d.1
[ 2.344254] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level,
low) -> IRQ 18
[ 2.344265] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 2.344270] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.344294] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 3
[ 2.344332] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060
[ 2.344412] usb usb3: configuration #1 chosen from 1 choice
[ 2.344441] hub 3-0:1.0: USB hub found
[ 2.344448] hub 3-0:1.0: 2 ports detected
[ 2.448136] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.448140] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.448143] usb usb3: Product: UHCI Host Controller
[ 2.448146] usb usb3: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 2.448148] usb usb3: SerialNumber: 0000:00:1d.2
[ 2.448226] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level,
low) -> IRQ 19
[ 2.448239] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 2.448244] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.448269] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 4
[ 2.448309] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00004080
[ 2.448393] usb usb4: configuration #1 chosen from 1 choice
[ 2.448421] hub 4-0:1.0: USB hub found
[ 2.448427] hub 4-0:1.0: 2 ports detected
[ 2.552156] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.552160] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.552163] usb usb4: Product: UHCI Host Controller
[ 2.552166] usb usb4: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 2.552168] usb usb4: SerialNumber: 0000:00:1d.3
[ 2.553234] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level,
low) -> IRQ 20
[ 2.553252] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 2.553256] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.553292] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 5
[ 2.557234] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.557241] PCI: cache line size of 32 is not supported by device
0000:00:1d.7
[ 2.557248] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf4584000
[ 2.584068] usb 2-2: new full speed USB device using uhci_hcd and
address 2
[ 2.596039] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 2.596144] usb usb5: configuration #1 chosen from 1 choice
[ 2.596175] hub 5-0:1.0: USB hub found
[ 2.596183] hub 5-0:1.0: 8 ports detected
[ 2.652067] hub 2-0:1.0: unable to enumerate USB device on port 2
[ 2.700168] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.700172] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.700175] usb usb5: Product: EHCI Host Controller
[ 2.700178] usb usb5: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
[ 2.700180] usb usb5: SerialNumber: 0000:00:1d.7
[ 2.700285] ICH7: IDE controller (0x8086:0x27df rev 0x01) at PCI
slot 0000:00:1f.1
[ 2.700296] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level,
low) -> IRQ 16
[ 2.700307] ICH7: not 100% native mode: will probe irqs later
[ 2.700317] ICH7: IDE port disabled
[ 2.700325] ide0: BM-DMA at 0x40a0-0x40a7
[ 2.700332] Probing IDE interface ide0...
[ 3.000047] Clocksource tsc unstable (delta = -240862694 ns)
[ 3.368050] usb 2-2: new full speed USB device using uhci_hcd and
address 3
[ 3.436396] hda: HL-DT-ST DVDRAM GMA-4082N, ATAPI CD/DVD-ROM drive
[ 3.560461] usb 2-2: configuration #1 chosen from 1 choice
[ 3.560461] usb 2-2: New USB device found, idVendor=0a12, idProduct=0001
[ 3.560461] usb 2-2: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 3.772093] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 3.772960] hda: MWDMA2 mode selected
[ 3.773435] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.776836] ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 19 (level,
low) -> IRQ 19
[ 3.827895] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]
MMIO=[f4101000-f41017ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 3.828034] ahci 0000:00:1f.2: version 3.0
[ 3.828058] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level,
low) -> IRQ 17
[ 3.829130] ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 3.888112] ssb: Sonics Silicon Backplane found on PCI device
0000:02:0e.0
[ 3.888137] b44.c:v2.0
[ 3.908416] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet
00:17:08:38:62:01
[ 4.832072] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5
Gbps 0x1 impl SATA mode
[ 4.832077] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo
pmp pio slum part
[ 4.832084] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.832191] scsi0 : ahci
[ 4.832426] scsi1 : ahci
[ 4.832585] scsi2 : ahci
[ 4.832739] scsi3 : ahci
[ 4.832813] ata1: SATA max UDMA/133 abar m1024@0xf4585000 port
0xf4585100 irq 220
[ 4.832816] ata2: DUMMY
[ 4.832818] ata3: DUMMY
[ 4.832819] ata4: DUMMY
[ 5.316060] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.318247] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 5.318250] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out
[ 5.318368] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
[ 5.318372] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 5.318721] ata1.00: ATA-7: FUJITSU MHV2060BH PL, 892C, max UDMA/100
[ 5.318724] ata1.00: 117231408 sectors, multi 16: LBA48
[ 5.320977] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 5.320977] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out
[ 5.321068] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
[ 5.321068] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 5.321383] ata1.00: configured for UDMA/100
[ 5.338706] ata1.00: configured for UDMA/100
[ 5.338710] ata1: EH complete
[ 5.338840] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2060B
892C PQ: 0 ANSI: 5
[ 5.362695] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 5.362703] Uniform CD-ROM driver Revision: 3.20
[ 5.378511] Driver 'sd' needs updating - please use bus_type methods
[ 5.378622] sd 0:0:0:0: [sda] 117231408 512-byte hardware sectors
(60022 MB)
[ 5.378645] sd 0:0:0:0: [sda] Write Protect is off
[ 5.378648] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.378686] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.378752] sd 0:0:0:0: [sda] 117231408 512-byte hardware sectors
(60022 MB)
[ 5.378773] sd 0:0:0:0: [sda] Write Protect is off
[ 5.378776] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.378813] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.378819] sda: sda1 sda2 < sda5 >
[ 5.485899] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.590156] PM: Starting manual resume from disk
[ 5.671570] kjournald starting. Commit interval 5 seconds
[ 5.671570] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.282408] udevd version 125 started
[ 8.284115] Linux agpgart interface v0.103
[ 8.289442] agpgart: Detected an Intel 945GM Chipset.
[ 8.289640] agpgart: Detected 7932K stolen memory.
[ 8.307068] agpgart: AGP aperture is 256M @ 0xe0000000
[ 8.672435] input: Power Button (FF) as /class/input/input1
[ 8.707374] ACPI: Power Button (FF) [PWRF]
[ 8.707483] input: Sleep Button (CM) as /class/input/input2
[ 8.732062] ACPI: Sleep Button (CM) [C243]
[ 8.732143] input: Lid Switch as /class/input/input3
[ 8.748172] ACPI: Lid Switch [C23C]
[ 8.748617] ACPI: AC Adapter [C1BC] (on-line)
[ 8.999676] ACPI: Battery Slot [C1BE] (battery present)
[ 8.999917] ACPI: Battery Slot [C1BD] (battery absent)
[ 9.010943] ACPI: WMI: Mapper loaded
[ 9.551149] ACPI: device:03 is registered as cooling_device5
[ 9.551455] input: Video Bus as /class/input/input4
[ 9.551754] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 9.551786] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 9.576077] ACPI: Video Device [C085] (multi-head: yes rom: no
post: no)
[ 10.180322] Bluetooth: Core ver 2.11
[ 10.201156] b43-phy0: Broadcom 4311 WLAN found
[ 10.201243] NET: Registered protocol family 31
[ 10.201246] Bluetooth: HCI device and connection manager initialized
[ 10.201249] Bluetooth: HCI socket layer initialized
[ 10.219265] Bluetooth: HCI USB driver ver 2.9
[ 10.220650] usbcore: registered new interface driver hci_usb
[ 10.250614] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 10.250690] iTCO_wdt: Found a ICH7-M TCO device (Version=2,
TCOBASE=0x1060)
[ 10.250721] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.268406] phy0: Selected rate control algorithm 'pid'
[ 10.354592] intel_rng: FWH not detected
[ 10.804499] Yenta: CardBus bridge found at 0000:02:06.0 [103c:30a2]
[ 10.804525] PCI: Bus 3, cardbus bridge: 0000:02:06.0
[ 10.804528] IO window: 0x00005000-0x000050ff
[ 10.804533] IO window: 0x00005400-0x000054ff
[ 10.804539] PREFETCH window: 0x84000000-0x843fffff
[ 10.804545] MEM window: 0x80000000-0x83ffffff
[ 10.804552] Yenta: Enabling burst memory read transactions
[ 10.804558] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 10.804561] Yenta: Routing CardBus interrupts to PCI
[ 10.804567] Yenta TI: socket 0000:02:06.0, mfunc 0x01011b22, devctl 0x64
[ 10.804609] Broadcom 43xx driver loaded [ Features: PMLR,
Firmware-ID: FW13 ]
[ 10.809261] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1,
caps: 0xa04793/0x300000
[ 10.809267] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 10.829322] input: PC Speaker as /class/input/input5
[ 10.848287] input: SynPS/2 Synaptics TouchPad as /class/input/input6
[ 11.036843] Yenta: ISA IRQ mask 0x0cf8, PCI irq 18
[ 11.036849] Socket status: 30000006
[ 11.036852] Yenta: Raising subordinate bus# of parent bus (#02) from
#03 to #06
[ 11.036857] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
[ 11.036860] cs: IO port probe 0x5000-0x5fff: clean.
[ 11.037093] pcmcia: parent PCI bridge Memory window: 0xf4100000 -
0xf43fffff
[ 11.058650] parport_pc 00:02: reported by Plug and Play ACPI
[ 11.058724] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 11.823644] cs: IO port probe 0x100-0x3af: clean.
[ 11.825672] cs: IO port probe 0x3e0-0x4ff: clean.
[ 11.826505] cs: IO port probe 0x820-0x8ff: clean.
[ 11.827197] cs: IO port probe 0xc00-0xcf7: clean.
[ 11.828024] cs: IO port probe 0xa00-0xaff: clean.
[ 12.510693] Adding 2433808k swap on /dev/sda5. Priority:-1 extents:1
across:2433808k
[ 12.960823] EXT3 FS on sda1, internal journal
[ 13.205901] loop: module loaded
[ 20.856647] input: b43-phy0 as /class/input/input7
[ 20.944048] firmware: requesting b43/ucode5.fw
[ 21.039259] firmware: requesting b43/pcm5.fw
[ 21.069106] warning: `avahi-daemon' uses 32-bit capabilities (legacy
support in use)
[ 21.072484] firmware: requesting b43/b0g0initvals5.fw
[ 21.140656] firmware: requesting b43/b0g0bsinitvals5.fw
[ 21.264050] b43-phy0: Loading firmware version 410.2160 (2007-05-26
15:32:10)
[ 21.291511] NET: Registered protocol family 10
[ 22.436514] Registered led device: b43-phy0::tx
[ 22.436537] Registered led device: b43-phy0::rx
[ 22.436558] Registered led device: b43-phy0::radio
[ 22.489156] lo: Disabled Privacy Extensions
[ 22.490546] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.491045] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 23.693740] Bluetooth: L2CAP ver 2.9
[ 23.693740] Bluetooth: L2CAP socket layer initialized
[ 23.831415] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 24.109540] Bluetooth: RFCOMM socket layer initialized
[ 24.109555] Bluetooth: RFCOMM TTY layer initialized
[ 24.109557] Bluetooth: RFCOMM ver 1.8
[ 27.980267] [drm] Initialized drm 1.1.0 20060810
[ 27.984542] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 27.984552] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 27.984636] [drm] Initialized i915 1.6.0 20060119 on minor 0
LSPCI
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS,
943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME,
943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 2 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
Controller (rev 01)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family)
SATA AHCI Controller (rev 01)
02:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
02:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant
IEEE 1394 Host Controller
02:0e.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX
(rev 02)
10:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN
(rev 01)
--- Begin Message ---
Package: wordnet
Severity: minor
In description info doubled in first and third paragraph. Please fix it.
-- System Information:
Debian Release: 5.0
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
--- End Message ---
--- End Message ---