--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: linux-image-2.6.26-1-amd64: Extremely bad responsiveness for certain nice/non-nice process combinations
- From: Peter Teichmann <peter@peter-teichmann.de>
- Date: Wed, 7 Jan 2009 22:49:14 +0100
- Message-id: <200901072249.15068.peter@peter-teichmann.de>
Package: linux-image-2.6.26-1-amd64
Version: 2.6.26-12
On my system (dual-core Athlon64 X2) I have usually running two low-priority
computing tasks with nice-level 19. During work, I regularly start one
additional high-priority computing task with nice-level 0. All three tasks
are running with my UID. While they are running, I am continuing work,
reading emails and documents, browsing the net, playing music, etc.
With kernel 2.6.18-6-amd64 from the stable distribution, this works
flawlessly. Sound is playing without gaps, mouse is moving smoothly, pressed
keys show up immediately.
However with kernel 2.6.26-1-amd64 it is a nighmare. Sound has gaps nearly
every second, mouse is sluggish, pressed keys sometimes show up only after
some seconds. Especially annoying is that sometimes even if a key is only
pressed for a very short time the delay between key-press and key-release
events seems to be several seconds so that the key is repeated many times.
The problem can be repeated without X11 and the particular programs used by
me. It can be reproduced by only entering the following commands into a text
console:
nice -n 19 cat /dev/urandom > /dev/null &
nice -n 19 cat /dev/urandom > /dev/null &
cat /dev/urandom > /dev/null &
With kernel 2.6.18-6-amd64 I can then continue to work without noticing any
difference. "top" shows that the last command gets 100% of one CPU and the two
niced commands get exactly 50% of one CPU each.
With kernel 2.6.26-1-amd64 the nightmare starts. If I start typing something
into the console, pressed keys are often delayed, sometimes there is no
reaction to a pressed key for tens of seconds. Sometimes a key repeats many
times despite it was only pressed short. "top" shows that the last command
gets 100% of one CPU, but the time between the two niced commands is not
distributed evenly, it is constantly changing and can be someting like 28%/72%
for instance.
The problem does also show up if only one command is niced and two are not. It
does not show up if all on none of the commands are niced. The same problem does
also exist for the -686 and -686-bigmem kernels.
I would greatly appreciate if this problem could be solved!
Best regards,
Peter Teichmann
-- Package-specific info:
** Version:
Linux version 2.6.26-1-amd64 (Debian 2.6.26-12) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Mon Dec 15 19:40:58 UTC 2008
** Command line:
root=/dev/sda5 ro vga=775
** Not tainted
** Kernel log:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-amd64 (Debian 2.6.26-12) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Mon Dec 15 19:40:58 UTC 2008
[ 0.000000] Command line: root=/dev/sda5 ro vga=775
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000affc0000 (usable)
[ 0.000000] BIOS-e820: 00000000affc0000 - 00000000affce000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000affce000 - 00000000afff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000afff0000 - 00000000b0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000150000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 720832) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1376256) 2 entries of 3200 used
[ 0.000000] max_pfn_mapped = 1376256
[ 0.000000] init_memory_mapping
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000FB870, 0024 (r2 ACPIAM)
[ 0.000000] ACPI: XSDT AFFC0100, 0044 (r1 A M I OEMXSDT 4000619 MSFT 97)
[ 0.000000] ACPI: FACP AFFC0290, 00F4 (r3 A M I OEMFACP 4000619 MSFT 97)
[ 0.000000] ACPI: DSDT AFFC0440, 5683 (r1 A0368 A0368001 1 INTL 2002026)
[ 0.000000] ACPI: FACS AFFCE000, 0040
[ 0.000000] ACPI: APIC AFFC0390, 0070 (r1 A M I OEMAPIC 4000619 MSFT 97)
[ 0.000000] ACPI: MCFG AFFC0400, 003C (r1 A M I OEMMCFG 4000619 MSFT 97)
[ 0.000000] ACPI: OEMB AFFCE040, 005B (r1 A M I AMI_OEM 4000619 MSFT 97)
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000150000000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 720832) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1376256) 2 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000150000000
[ 0.000000] NODE_DATA [000000000000f000 - 0000000000013fff]
[ 0.000000] bootmap [0000000000014000 - 000000000003dfff] pages 2a
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
[ 0.000000] early res: 2 [200000-675397] TEXT DATA BSS
[ 0.000000] early res: 3 [378fc000-37fefb21] RAMDISK
[ 0.000000] early res: 4 [9fc00-fffff] BIOS reserved
[ 0.000000] early res: 5 [8000-efff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe20003dfffff] PMD -> [ffff810001200000-ffff810003ffffff] on node 0
[ 0.000000] [ffffe20003e00000-ffffe200049fffff] PMD -> [ffff81000c000000-ffff81000cbfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1376256
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 720832
[ 0.000000] 0: 1048576 -> 1376256
[ 0.000000] On node 0 totalpages: 1048415
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1249 pages reserved
[ 0.000000] DMA zone: 2694 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 702456 pages, LIFO batch:31
[ 0.000000] Normal zone: 4480 pages used for memmap
[ 0.000000] Normal zone: 323200 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000
[ 0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000affc0000 - 00000000affce000
[ 0.000000] PM: Registered nosave memory: 00000000affce000 - 00000000afff0000
[ 0.000000] PM: Registered nosave memory: 00000000afff0000 - 00000000b0000000
[ 0.000000] PM: Registered nosave memory: 00000000b0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff780000
[ 0.000000] PM: Registered nosave memory: 00000000ff780000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at b8000000 (gap: b0000000:4ec00000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 2
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028350
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda5 ro vga=775
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.000000] time.c: Detected 2009.148 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour dummy device 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] Node 0: aperture @ 4000000 size 32 MB
[ 0.004000] Aperture pointing to e820 RAM. Ignoring.
[ 0.004000] No AGP bridge found
[ 0.004000] Your BIOS doesn't leave a aperture memory hole
[ 0.004000] Please enable the IOMMU option in the BIOS setup
[ 0.004000] This costs you 64 MB of RAM
[ 0.004000] Mapping aperture over 65536 KB of RAM @ 4000000
[ 0.004000] PM: Registered nosave memory: 0000000004000000 - 0000000008000000
[ 0.004000] Memory: 4056652k/5505024k available (2226k kernel code, 137008k reserved, 1082k data, 392k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084079] Calibrating delay using timer specific routine.. 4022.30 BogoMIPS (lpj=8044615)
[ 0.084144] Security Framework initialized
[ 0.084154] SELinux: Disabled at boot.
[ 0.084161] Capability LSM initialized
[ 0.084596] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.087789] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.089195] Mount-cache hash table entries: 256
[ 0.089383] Initializing cgroup subsys ns
[ 0.089391] Initializing cgroup subsys cpuacct
[ 0.089398] Initializing cgroup subsys devices
[ 0.089422] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.089429] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.089434] CPU 0/0 -> Node 0
[ 0.089450] CPU: Physical Processor ID: 0
[ 0.089455] CPU: Processor Core ID: 0
[ 0.090202] ACPI: Core revision 20080321
[ 0.142907] CPU0: AMD Athlon(tm)64 X2 Dual Core Processor 3800+ stepping 02
[ 0.142917] Using local APIC timer interrupts.
[ 0.148009] APIC timer calibration result 12557167
[ 0.148009] Detected 12.557 MHz APIC timer.
[ 0.148009] Booting processor 1/1 ip 6000
[ 0.156009] Initializing CPU#1
[ 0.156009] Calibrating delay using timer specific routine.. 4018.31 BogoMIPS (lpj=8036637)
[ 0.156009] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.156009] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.156009] CPU 1/1 -> Node 0
[ 0.156009] CPU: Physical Processor ID: 0
[ 0.156009] CPU: Processor Core ID: 1
[ 0.235926] CPU1: AMD Athlon(tm)64 X2 Dual Core Processor 3800+ stepping 02
[ 0.235967] Brought up 2 CPUs
[ 0.235973] Total of 2 processors activated (8040.62 BogoMIPS).
[ 0.236014] CPU0 attaching sched-domain:
[ 0.236014] domain 0: span 0-1
[ 0.236014] groups: 0 1
[ 0.236014] domain 1: span 0-1
[ 0.236014] groups: 0-1
[ 0.236014] CPU1 attaching sched-domain:
[ 0.236014] domain 0: span 0-1
[ 0.236014] groups: 1 0
[ 0.236014] domain 1: span 0-1
[ 0.236014] groups: 0-1
[ 0.236014] net_namespace: 1224 bytes
[ 0.236014] Booting paravirtualized kernel on bare hardware
[ 0.236014] NET: Registered protocol family 16
[ 0.236014] node 0 link 0: io port [1000, ffffff]
[ 0.236014] TOM: 00000000b0000000 aka 2816M
[ 0.236014] node 0 link 0: mmio [e0000000, efffffff]
[ 0.236014] node 0 link 0: mmio [a0000, bffff]
[ 0.236014] node 0 link 0: mmio [b0000000, fe0bffff]
[ 0.236014] TOM2: 0000000150000000 aka 5376M
[ 0.236014] bus: [00,ff] on node 0 link 0
[ 0.236014] bus: 00 index 0 io port: [0, ffff]
[ 0.236014] bus: 00 index 1 mmio: [b0000000, ffffffff]
[ 0.236014] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.236014] bus: 00 index 3 mmio: [150000000, fcffffffff]
[ 0.236014] ACPI: bus type pci registered
[ 0.236014] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.236014] PCI: Not using MMCONFIG.
[ 0.236014] PCI: Using configuration type 1 for base access
[ 0.236014] ACPI: EC: Look up EC in DSDT
[ 0.245087] ACPI: Interpreter enabled
[ 0.245095] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.245119] ACPI: Using IOAPIC for interrupt routing
[ 0.245185] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.251344] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.268016] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.280017] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.280017] PCI: Transparent bridge - 0000:00:10.0
[ 0.280017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.280017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE0._PRT]
[ 0.280145] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE1._PRT]
[ 0.282526] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.282671] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.298276] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.298276] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.298276] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.298276] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *5
[ 0.298276] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *11
[ 0.298276] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[ 0.298276] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 0.298276] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[ 0.298276] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[ 0.298276] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *5
[ 0.298276] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
[ 0.298276] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *5
[ 0.298276] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[ 0.299721] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[ 0.299968] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5
[ 0.300213] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10
[ 0.300458] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
[ 0.300702] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
[ 0.301271] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.301682] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - C3, should be B6 [20080321]
[ 0.301698] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.301850] pnp: PnP ACPI init
[ 0.301861] ACPI: bus type pnp registered
[ 0.301885] pnp 00:00: parse allocated resources
[ 0.302009] pnp 00:00: add io 0xcf8-0xcff flags 0x1
[ 0.302179] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.302209] pnp 00:01: parse allocated resources
[ 0.302217] pnp 00:01: add dma 4 flags 0x4
[ 0.302219] pnp 00:01: add io 0x0-0xf flags 0x1
[ 0.302221] pnp 00:01: add io 0x81-0x83 flags 0x1
[ 0.302223] pnp 00:01: add io 0x87-0x87 flags 0x1
[ 0.302226] pnp 00:01: add io 0x89-0x8b flags 0x1
[ 0.302228] pnp 00:01: add io 0x8f-0x8f flags 0x1
[ 0.302230] pnp 00:01: add io 0xc0-0xdf flags 0x1
[ 0.302387] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.302404] pnp 00:02: parse allocated resources
[ 0.302410] pnp 00:02: add io 0x70-0x71 flags 0x1
[ 0.302422] pnp 00:02: add irq 8 flags 0x1
[ 0.302578] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.302594] pnp 00:03: parse allocated resources
[ 0.302599] pnp 00:03: add io 0x61-0x61 flags 0x1
[ 0.302757] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.302772] pnp 00:04: parse allocated resources
[ 0.302777] pnp 00:04: add io 0xf0-0xff flags 0x1
[ 0.302785] pnp 00:04: add irq 13 flags 0x1
[ 0.302942] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.303234] pnp 00:05: parse allocated resources
[ 0.303470] pnp 00:05: add irq 6 flags 0x1
[ 0.303470] pnp 00:05: add dma 2 flags 0x0
[ 0.303470] pnp 00:05: add io 0x3f0-0x3f5 flags 0x1
[ 0.303470] pnp 00:05: add io 0x3f7-0x3f7 flags 0x1
[ 0.303470] pnp 00:05: parse resource options
[ 0.303470] pnp 00:05: new independent option
[ 0.303470] pnp 00:05: new dependent option (priority 0x0)
[ 0.303470] pnp 00:05: io min 0x3f0 max 0x3f0 align 1 size 6 flags 0x1
[ 0.303470] pnp 00:05: io min 0x3f7 max 0x3f7 align 1 size 1 flags 0x1
[ 0.303470] pnp 00:05: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000040 flags 0x1
[ 0.303470] pnp 00:05: dma bitmask 0x4 flags 0x0
[ 0.303470] pnp 00:05: new dependent option (priority 0x1)
[ 0.303470] pnp 00:05: io min 0x3f0 max 0x3f0 align 1 size 6 flags 0x1
[ 0.303470] pnp 00:05: io min 0x3f7 max 0x3f7 align 1 size 1 flags 0x1
[ 0.303470] pnp 00:05: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.303470] pnp 00:05: dma bitmask 0xf flags 0x0
[ 0.303470] pnp 00:05: new dependent option (priority 0x1)
[ 0.303470] pnp 00:05: io min 0x370 max 0x370 align 1 size 6 flags 0x1
[ 0.303470] pnp 00:05: io min 0x377 max 0x377 align 1 size 1 flags 0x1
[ 0.303470] pnp 00:05: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.303470] pnp 00:05: dma bitmask 0xf flags 0x0
[ 0.303470] pnp 00:05: end dependent options
[ 0.303470] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.303470] pnp 00:06: parse allocated resources
[ 0.304111] pnp 00:06: add irq 7 flags 0x1
[ 0.304114] pnp 00:06: add dma 3 flags 0x0
[ 0.304116] pnp 00:06: add io 0x378-0x37f flags 0x1
[ 0.304118] pnp 00:06: add io 0x778-0x77f flags 0x1
[ 0.304120] pnp 00:06: parse resource options
[ 0.304122] pnp 00:06: new independent option
[ 0.304368] pnp 00:06: new dependent option (priority 0x0)
[ 0.304371] pnp 00:06: io min 0x378 max 0x378 align 1 size 8 flags 0x1
[ 0.304374] pnp 00:06: io min 0x778 max 0x778 align 1 size 8 flags 0x1
[ 0.304378] pnp 00:06: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000080 flags 0x1
[ 0.304381] pnp 00:06: dma bitmask 0x8 flags 0x0
[ 0.304384] pnp 00:06: new dependent option (priority 0x1)
[ 0.304386] pnp 00:06: io min 0x378 max 0x378 align 1 size 8 flags 0x1
[ 0.304389] pnp 00:06: io min 0x778 max 0x778 align 1 size 8 flags 0x1
[ 0.304393] pnp 00:06: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.304396] pnp 00:06: dma bitmask 0xf flags 0x0
[ 0.304398] pnp 00:06: new dependent option (priority 0x1)
[ 0.304401] pnp 00:06: io min 0x278 max 0x278 align 1 size 8 flags 0x1
[ 0.304404] pnp 00:06: io min 0x678 max 0x678 align 1 size 8 flags 0x1
[ 0.304408] pnp 00:06: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.304411] pnp 00:06: dma bitmask 0xf flags 0x0
[ 0.304413] pnp 00:06: new dependent option (priority 0x1)
[ 0.304415] pnp 00:06: io min 0x3bc max 0x3bc align 1 size 4 flags 0x1
[ 0.304418] pnp 00:06: io min 0x7bc max 0x7bc align 1 size 4 flags 0x1
[ 0.304422] pnp 00:06: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.304425] pnp 00:06: dma bitmask 0xf flags 0x0
[ 0.304427] pnp 00:06: end dependent options
[ 0.304587] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.304602] pnp 00:07: parse allocated resources
[ 0.305267] pnp 00:07: add io 0x10-0x1f flags 0x1
[ 0.305270] pnp 00:07: add io 0x22-0x3f flags 0x1
[ 0.305272] pnp 00:07: add io 0x44-0x5f flags 0x1
[ 0.305274] pnp 00:07: add io 0x62-0x63 flags 0x1
[ 0.305276] pnp 00:07: add io 0x65-0x6f flags 0x1
[ 0.305279] pnp 00:07: add io 0x72-0x7f flags 0x1
[ 0.305281] pnp 00:07: add io 0x80-0x80 flags 0x1
[ 0.305283] pnp 00:07: add io 0x84-0x86 flags 0x1
[ 0.305285] pnp 00:07: add io 0x88-0x88 flags 0x1
[ 0.305287] pnp 00:07: add io 0x8c-0x8e flags 0x1
[ 0.305289] pnp 00:07: add io 0x90-0x9f flags 0x1
[ 0.305292] pnp 00:07: add io 0xa2-0xbf flags 0x1
[ 0.305294] pnp 00:07: add io 0xe0-0xef flags 0x1
[ 0.305297] pnp 00:07: add io 0x4d0-0x4d1 flags 0x1
[ 0.305299] pnp 00:07: add io 0x800-0x80f flags 0x1
[ 0.305301] pnp 00:07: add io 0x500-0x57f flags 0x1
[ 0.305303] pnp 00:07: add io 0x580-0x5ff flags 0x1
[ 0.305306] pnp 00:07: add io 0x800-0x87f flags 0x1
[ 0.305308] pnp 00:07: add io 0x880-0x8ff flags 0x1
[ 0.305311] pnp 00:07: add io 0x900-0x97f flags 0x1
[ 0.305313] pnp 00:07: add io 0x980-0x9ff flags 0x1
[ 0.305316] pnp 00:07: add io 0x2000-0x207f flags 0x1
[ 0.305319] pnp 00:07: add io 0x2080-0x20ff flags 0x1
[ 0.305321] pnp 00:07: add mem 0xfefe0000-0xfefe01ff flags 0x0
[ 0.305324] pnp 00:07: add mem 0xfebc0000-0xfebfffff flags 0x0
[ 0.305326] pnp 00:07: add mem 0xfee01000-0xfeefffff flags 0x0
[ 0.305330] pnp 00:07: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.305528] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.305576] pnp 00:08: parse allocated resources
[ 0.305669] pnp 00:08: add mem 0xfec00000-0xfec00fff flags 0x0
[ 0.305672] pnp 00:08: add mem 0xfee00000-0xfee00fff flags 0x0
[ 0.305675] pnp 00:08: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.305864] pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.306819] pnp 00:09: parse allocated resources
[ 0.307156] pnp 00:09: add irq 4 flags 0x1
[ 0.307159] pnp 00:09: add io 0x3f8-0x3ff flags 0x1
[ 0.307161] pnp 00:09: parse resource options
[ 0.307163] pnp 00:09: new independent option
[ 0.307203] pnp 00:09: new dependent option (priority 0x0)
[ 0.307205] pnp 00:09: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
[ 0.307210] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
[ 0.307213] pnp 00:09: new dependent option (priority 0x1)
[ 0.307216] pnp 00:09: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
[ 0.307220] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.307223] pnp 00:09: new dependent option (priority 0x1)
[ 0.307226] pnp 00:09: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
[ 0.307230] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.307233] pnp 00:09: new dependent option (priority 0x1)
[ 0.307236] pnp 00:09: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
[ 0.307240] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.307243] pnp 00:09: new dependent option (priority 0x1)
[ 0.307245] pnp 00:09: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
[ 0.307250] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.307252] pnp 00:09: end dependent options
[ 0.307415] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.307431] pnp 00:0a: parse allocated resources
[ 0.307470] pnp 00:0a: add io 0x0-0xffffffffffffffff flags 0x10000001
[ 0.307470] pnp 00:0a: add io 0x0-0xffffffffffffffff flags 0x10000001
[ 0.307470] pnp 00:0a: add io 0x290-0x297 flags 0x1
[ 0.307470] pnp 00:0a: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.307470] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.307470] pnp 00:0b: parse allocated resources
[ 0.307470] pnp 00:0b: add mem 0xe0000000-0xefffffff flags 0x0
[ 0.307470] pnp 00:0b: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.307470] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.307470] pnp 00:0c: parse allocated resources
[ 0.307470] pnp 00:0c: add mem 0x0-0x9ffff flags 0x1
[ 0.307470] pnp 00:0c: add mem 0xc0000-0xcffff flags 0x0
[ 0.307470] pnp 00:0c: add mem 0xe0000-0xfffff flags 0x0
[ 0.307470] pnp 00:0c: add mem 0x100000-0xafffffff flags 0x1
[ 0.307470] pnp 00:0c: add mem 0xff780000-0xffffffff flags 0x0
[ 0.307470] pnp 00:0c: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
[ 0.307470] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.308769] pnp: PnP ACPI: found 13 devices
[ 0.308777] ACPI: ACPI bus type pnp unregistered
[ 0.309836] usbcore: registered new interface driver usbfs
[ 0.310143] usbcore: registered new interface driver hub
[ 0.310438] usbcore: registered new device driver usb
[ 0.311441] PCI: Using ACPI for IRQ routing
[ 0.327472] PCI-DMA: Disabling AGP.
[ 0.327472] PCI-DMA: aperture base @ 4000000 size 65536 KB
[ 0.327472] PCI-DMA: using GART IOMMU.
[ 0.327472] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.327472] ACPI: RTC can wake from S4
[ 0.341947] pnp: the driver 'system' has been registered
[ 0.341970] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.341978] system 00:07: ioport range 0x800-0x80f has been reserved
[ 0.341985] system 00:07: ioport range 0x500-0x57f has been reserved
[ 0.341991] system 00:07: ioport range 0x580-0x5ff has been reserved
[ 0.341998] system 00:07: ioport range 0x800-0x87f could not be reserved
[ 0.342004] system 00:07: ioport range 0x880-0x8ff has been reserved
[ 0.342010] system 00:07: ioport range 0x900-0x97f has been reserved
[ 0.342017] system 00:07: ioport range 0x980-0x9ff has been reserved
[ 0.342023] system 00:07: ioport range 0x2000-0x207f has been reserved
[ 0.342029] system 00:07: ioport range 0x2080-0x20ff has been reserved
[ 0.342037] system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 0.342044] system 00:07: iomem range 0xfebc0000-0xfebfffff has been reserved
[ 0.342050] system 00:07: iomem range 0xfee01000-0xfeefffff could not be reserved
[ 0.342059] system 00:07: driver attached
[ 0.342067] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.342076] system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.342085] system 00:08: driver attached
[ 0.342092] system 00:0a: ioport range 0x290-0x297 has been reserved
[ 0.342099] system 00:0a: driver attached
[ 0.342106] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.342113] system 00:0b: driver attached
[ 0.342120] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.342127] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[ 0.343955] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.343962] system 00:0c: iomem range 0x100000-0xafffffff could not be reserved
[ 0.343971] system 00:0c: iomem range 0xff780000-0xffffffff could not be reserved
[ 0.343979] system 00:0c: driver attached
[ 0.345295] PCI: Bridge: 0000:00:02.0
[ 0.345295] IO window: disabled.
[ 0.345295] MEM window: disabled.
[ 0.345295] PREFETCH window: disabled.
[ 0.345295] PCI: Bridge: 0000:00:03.0
[ 0.345295] IO window: disabled.
[ 0.345295] MEM window: disabled.
[ 0.345295] PREFETCH window: disabled.
[ 0.345295] PCI: Bridge: 0000:00:04.0
[ 0.345295] IO window: b000-bfff
[ 0.345295] MEM window: 0xfa900000-0xfe9fffff
[ 0.345295] PREFETCH window: 0x00000000bff00000-0x00000000dfefffff
[ 0.345295] PCI: Bridge: 0000:00:10.0
[ 0.345295] IO window: c000-cfff
[ 0.345295] MEM window: 0xfea00000-0xfeafffff
[ 0.345295] PREFETCH window: disabled.
[ 0.345295] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.345295] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 0.345295] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 0.345295] PCI: Setting latency timer of device 0000:00:10.0 to 64
[ 0.345295] NET: Registered protocol family 2
[ 0.348323] Switched to high resolution mode on CPU 0
[ 0.350840] Switched to high resolution mode on CPU 1
[ 0.380443] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.383556] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.387564] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.387564] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.387564] TCP reno registered
[ 0.395814] NET: Registered protocol family 1
[ 0.395934] checking if image is initramfs... it is
[ 0.927537] Freeing initrd memory: 7118k freed
[ 0.936461] audit: initializing netlink socket (disabled)
[ 0.936461] type=2000 audit(1231277578.924:1): initialized
[ 0.936461] Total HugeTLB memory allocated, 0
[ 0.936461] VFS: Disk quotas dquot_6.5.1
[ 0.936461] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.936461] msgmni has been set to 7937
[ 0.936461] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.936461] io scheduler noop registered
[ 0.936461] io scheduler anticipatory registered
[ 0.936461] io scheduler deadline registered
[ 0.936461] io scheduler cfq registered (default)
[ 0.936461] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 0.936461] pci 0000:00:02.0: Enabling HT MSI Mapping
[ 0.936461] pci 0000:00:03.0: Enabling HT MSI Mapping
[ 0.936461] pci 0000:00:04.0: Enabling HT MSI Mapping
[ 0.936461] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 1.362420] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 1.362435] pci 0000:00:0f.0: Enabling HT MSI Mapping
[ 1.362449] pci 0000:00:10.0: Enabling HT MSI Mapping
[ 1.362464] pci 0000:00:10.1: Enabling HT MSI Mapping
[ 1.362490] pci 0000:03:00.0: Boot video device
[ 1.364558] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 1.364558] assign_interrupt_mode Found MSI capability
[ 1.364558] Allocate Port Service[0000:00:02.0:pcie00]
[ 1.364558] Allocate Port Service[0000:00:02.0:pcie03]
[ 1.364558] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 1.364558] assign_interrupt_mode Found MSI capability
[ 1.364558] Allocate Port Service[0000:00:03.0:pcie00]
[ 1.364558] Allocate Port Service[0000:00:03.0:pcie03]
[ 1.364558] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 1.364558] assign_interrupt_mode Found MSI capability
[ 1.364558] Allocate Port Service[0000:00:04.0:pcie00]
[ 1.364558] Allocate Port Service[0000:00:04.0:pcie03]
[ 1.364558] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20011100000, using 2560k, total 262144k
[ 1.364558] vesafb: mode is 1280x1024x8, linelength=1280, pages=1
[ 1.364558] vesafb: scrolling: redraw
[ 1.364558] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
[ 1.372386] Console: switching to colour frame buffer device 160x64
[ 1.380191] fb0: VESA VGA frame buffer device
[ 1.384557] Linux agpgart interface v0.103
[ 1.384557] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.384557] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.384557] pnp: the driver 'serial' has been registered
[ 1.384557] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.384557] serial 00:09: driver attached
[ 1.384558] brd: module loaded
[ 1.384558] input: Macintosh mouse button emulation as /class/input/input0
[ 1.384621] pnp: the driver 'i8042 kbd' has been registered
[ 1.386188] pnp: the driver 'i8042 aux' has been registered
[ 1.386274] pnp: the driver 'i8042 kbd' has been unregistered
[ 1.386311] pnp: the driver 'i8042 aux' has been unregistered
[ 1.386313] PNP: No PS/2 controller found. Probing ports directly.
[ 1.388804] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.388856] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.410183] mice: PS/2 mouse device common for all mice
[ 1.410183] pnp: the driver 'rtc_cmos' has been registered
[ 1.410183] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.410183] rtc0: alarms up to one year, y3k
[ 1.410183] rtc_cmos 00:02: driver attached
[ 1.410183] cpuidle: using governor ladder
[ 1.410183] cpuidle: using governor menu
[ 1.410183] No iBFT detected.
[ 1.410183] TCP cubic registered
[ 1.410183] NET: Registered protocol family 17
[ 1.410183] registered taskstats version 1
[ 1.410183] rtc_cmos 00:02: setting system clock to 2009-01-06 21:32:59 UTC (1231277579)
[ 1.410183] Freeing unused kernel memory: 392k freed
[ 1.542840] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.542840] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.985590] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
[ 1.985590] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 23 (level, low) -> IRQ 23
[ 1.985590] PCI: Setting latency timer of device 0000:00:0b.1 to 64
[ 1.985590] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 1.985590] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
[ 1.985590] ehci_hcd 0000:00:0b.1: debug port 1
[ 1.985590] PCI: cache line size of 64 is not supported by device 0000:00:0b.1
[ 1.985590] ehci_hcd 0000:00:0b.1: irq 23, io mem 0xfebbfc00
[ 1.986109] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.995944] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.996109] usb usb1: configuration #1 chosen from 1 choice
[ 1.996190] hub 1-0:1.0: USB hub found
[ 1.996233] hub 1-0:1.0: 8 ports detected
[ 2.007622] Uniform Multi-Platform E-IDE driver
[ 2.007622] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 2.102344] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.102416] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.104019] usb usb1: Product: EHCI Host Controller
[ 2.105635] usb usb1: Manufacturer: Linux 2.6.26-1-amd64 ehci_hcd
[ 2.107634] usb usb1: SerialNumber: 0000:00:0b.1
[ 2.111628] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
[ 2.112763] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 22 (level, low) -> IRQ 22
[ 2.114568] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 2.114572] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 2.116816] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 2.118705] ohci_hcd 0000:00:0b.0: irq 22, io mem 0xfebbe000
[ 2.170419] FDC 0 is a post-1991 82077
[ 2.179901] usb usb2: configuration #1 chosen from 1 choice
[ 2.181904] hub 2-0:1.0: USB hub found
[ 2.183865] hub 2-0:1.0: 8 ports detected
[ 2.288035] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.290099] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.292195] usb usb2: Product: OHCI Host Controller
[ 2.294292] usb usb2: Manufacturer: Linux 2.6.26-1-amd64 ohci_hcd
[ 2.298106] usb usb2: SerialNumber: 0000:00:0b.0
[ 2.300379] NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller
[ 2.302614] NFORCE-MCP51: IDE controller (0x10de:0x0265 rev 0xa1) at PCI slot 0000:00:0d.0
[ 2.306094] NFORCE-MCP51: not 100% native mode: will probe irqs later
[ 2.308427] ide0: BM-DMA at 0xffa0-0xffa7
[ 2.312425] ide1: BM-DMA at 0xffa8-0xffaf
[ 2.314759] Probing IDE interface ide0...
[ 2.373765] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 2.507600] usb 1-2: configuration #1 chosen from 1 choice
[ 2.510254] hub 1-2:1.0: USB hub found
[ 2.524619] hub 1-2:1.0: 3 ports detected
[ 2.634338] usb 1-2: New USB device found, idVendor=0409, idProduct=005a
[ 2.636732] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.876576] usb 1-7: new high speed USB device using ehci_hcd and address 3
[ 2.898004] Probing IDE interface ide1...
[ 3.014015] usb 1-7: configuration #1 chosen from 1 choice
[ 3.017528] usb 1-7: New USB device found, idVendor=05e3, idProduct=070e
[ 3.019824] usb 1-7: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 3.023824] usb 1-7: Product: USB Storage
[ 3.031817] usb 1-7: SerialNumber: 000000009602
[ 3.056125] SCSI subsystem initialized
[ 3.063848] Initializing USB Mass Storage driver...
[ 3.250557] usb 1-2.3: new full speed USB device using ehci_hcd and address 4
[ 3.406240] usb 1-2.3: configuration #1 chosen from 1 choice
[ 3.410440] usb 1-2.3: New USB device found, idVendor=056d, idProduct=0002
[ 3.412914] usb 1-2.3: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[ 3.434584] usb 1-2.3: Product: EIZO USB HID Monitor
[ 3.437073] usb 1-2.3: Manufacturer: EIZO
[ 3.442584] scsi0 : SCSI emulation for USB Mass Storage devices
[ 3.446707] usb-storage: device found at 3
[ 3.446707] usb-storage: waiting for device to settle before scanning
[ 3.446930] usbcore: registered new interface driver usb-storage
[ 3.448550] USB Mass Storage support registered.
[ 3.466477] usbcore: registered new interface driver hiddev
[ 3.504108] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.509601] ide1 at 0x170-0x177,0x376 on irq 15
[ 3.512084] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 3.512084] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[ 3.514519] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 21 (level, low) -> IRQ 21
[ 3.517608] PCI: Setting latency timer of device 0000:00:14.0 to 64
[ 4.035604] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:17:31:47:e0:25
[ 4.038077] forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3
[ 4.045533] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19
[ 4.048037] ACPI: PCI Interrupt 0000:04:05.0[A] -> Link [LNKD] -> GSI 19 (level, low) -> IRQ 19
[ 4.101262] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 4.105602] No dock devices found.
[ 4.117599] libata version 3.00 loaded.
[ 4.122107] sata_nv 0000:00:0e.0: version 3.5
[ 4.122472] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[ 4.125604] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LSA0] -> GSI 20 (level, low) -> IRQ 20
[ 4.128235] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 4.131005] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 4.134301] scsi1 : sata_nv
[ 4.134400] scsi2 : sata_nv
[ 4.138236] ata1: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe000 irq 20
[ 4.140827] ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xe008 irq 20
[ 4.724561] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.734486] ata1.00: ATA-8: WDC WD3200AAKS-00VYA0, 12.01B02, max UDMA/133
[ 4.734486] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 4.756422] ata1.00: configured for UDMA/133
[ 5.388625] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.396762] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-H62N, CL01, max UDMA/100
[ 5.412760] ata2.00: configured for UDMA/100
[ 5.415388] scsi 1:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5
[ 5.441909] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H62N CL01 PQ: 0 ANSI: 5
[ 5.448165] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
[ 5.451693] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LSA1] -> GSI 23 (level, low) -> IRQ 23
[ 5.454750] sata_nv 0000:00:0f.0: Using SWNCQ mode
[ 5.456042] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[ 5.459985] scsi3 : sata_nv
[ 5.462801] scsi4 : sata_nv
[ 5.462846] ata3: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 23
[ 5.465435] ata4: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 23
[ 5.664319] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000912933]
[ 5.923745] ata3: SATA link down (SStatus 0 SControl 300)
[ 6.313982] ata4: SATA link down (SStatus 0 SControl 300)
[ 6.351382] Driver 'sd' needs updating - please use bus_type methods
[ 6.352058] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 6.355444] sd 1:0:0:0: [sda] Write Protect is off
[ 6.358040] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.358085] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.360745] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 6.366040] sd 1:0:0:0: [sda] Write Protect is off
[ 6.368602] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.368682] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.371288] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 6.374039] sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[ 6.420940] sd 1:0:0:0: [sda] Attached SCSI disk
[ 6.666194] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.668851] Uniform CD-ROM driver Revision: 3.20
[ 6.671915] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 6.691771] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 6.694428] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 10.091836] usb-storage: device scan complete
[ 10.091836] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0
[ 10.095819] scsi 0:0:0:1: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0
[ 10.581230] scsi 0:0:0:2: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0
[ 10.585252] scsi 0:0:0:3: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0
[ 10.595353] sd 0:0:0:0: [sdb] Attached SCSI removable disk
[ 10.597912] sd 0:0:0:0: Attached scsi generic sg2 type 0
[ 10.604999] sd 0:0:0:1: [sdc] Attached SCSI removable disk
[ 10.607563] sd 0:0:0:1: Attached scsi generic sg3 type 0
[ 10.613042] sd 0:0:0:2: [sdd] Attached SCSI removable disk
[ 10.615587] sd 0:0:0:2: Attached scsi generic sg4 type 0
[ 10.622172] sd 0:0:0:3: [sde] Attached SCSI removable disk
[ 10.623602] sd 0:0:0:3: Attached scsi generic sg5 type 0
[ 18.598831] drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed
[ 18.601320] usbhid: timeout initializing reports
[ 18.603863] hiddev96hidraw0: USB HID v1.10 Device [EIZO EIZO USB HID Monitor] on usb-0000:00:0b.1-2.3
[ 18.606427] usbcore: registered new interface driver usbhid
[ 18.608975] usbhid: v2.6:USB HID core driver
[ 19.636779] kjournald starting. Commit interval 5 seconds
[ 19.639337] EXT3-fs: mounted filesystem with ordered data mode.
[ 20.886261] udevd version 125 started
[ 22.018820] input: Power Button (FF) as /class/input/input1
[ 22.072897] ACPI: Power Button (FF) [PWRF]
[ 22.074821] input: Power Button (CM) as /class/input/input2
[ 22.119246] ACPI: Power Button (CM) [PWRB]
[ 22.374827] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
[ 22.377398] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
[ 22.573938] input: PC Speaker as /class/input/input3
[ 22.781167] pnp: the driver 'parport_pc' has been registered
[ 22.781187] parport_pc 00:06: reported by Plug and Play ACPI
[ 22.783819] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 22.889184] parport_pc 00:06: driver attached
[ 22.952310] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 22.954645] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 22 (level, low) -> IRQ 22
[ 22.957168] PCI: Setting latency timer of device 0000:00:10.1 to 64
[ 24.422563] Adding 4192924k swap on /dev/sda7. Priority:-1 extents:1 across:4192924k
[ 24.746715] EXT3 FS on sda5, internal journal
[ 24.999674] powernow-k8: Found 1 AMD Athlon(tm)64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00)
[ 24.999673] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8
[ 25.002229] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa
[ 25.004718] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12
[ 25.066177] usbcore: registered new interface driver usbmouse
[ 25.066177] usbmouse: v1.6:USB HID Boot Protocol mouse driver
[ 25.138177] i2c /dev entries driver
[ 25.222177] w83627ehf: Found W83627EHG chip at 0x290
[ 25.943533] fuse init (API version 7.9)
[ 26.038025] kjournald starting. Commit interval 5 seconds
[ 26.038025] EXT3 FS on sda8, internal journal
[ 26.038025] EXT3-fs: mounted filesystem with ordered data mode.
[ 26.064370] kjournald starting. Commit interval 5 seconds
[ 26.064370] EXT3 FS on sda9, internal journal
[ 26.064370] EXT3-fs: mounted filesystem with ordered data mode.
[ 26.112369] NTFS driver 2.1.29 [Flags: R/W MODULE].
[ 26.172370] NTFS volume version 3.1.
[ 26.174805] NTFS-fs warning (device sda1): load_system_files(): Unsupported volume flags 0x4000 encountered.
[ 26.178800] NTFS-fs warning (device sda1): load_system_files(): Volume has unsupported flags set. Will not be able to remount read-write. Run chkdsk and mount in Windows.
[ 27.280386] Bridge firewalling registered
[ 27.285829] br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 27.290248] device eth0 entered promiscuous mode
[ 27.303812] br0: port 1(eth0) entering learning state
[ 27.968782] NET: Registered protocol family 10
[ 27.968782] lo: Disabled Privacy Extensions
[ 28.333394] br0: topology change detected, propagating
[ 28.335867] br0: port 1(eth0) entering forwarding state
[ 29.417680] RPC: Registered udp transport module.
[ 29.420148] RPC: Registered tcp transport module.
[ 29.542483] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 32.667871] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 32.691928] NFSD: starting 90-second grace period
[ 38.725681] eth0: no IPv6 routers present
[ 39.145675] br0: no IPv6 routers present
[ 42.248850] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 48.811049] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[ 50.849395] Clocksource tsc unstable (delta = -111500600 ns)
[ 77.649467] usb 2-6: new low speed USB device using ohci_hcd and address 2
[ 77.862546] usb 2-6: configuration #1 chosen from 1 choice
[ 77.878843] input: Logitech USB Receiver as /class/input/input4
[ 78.017529] input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:0b.0-6
[ 78.029466] input: Logitech USB Receiver as /class/input/input5
[ 78.085509] input,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:0b.0-6
[ 78.085614] usb 2-6: New USB device found, idVendor=046d, idProduct=c512
[ 78.085617] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 78.085620] usb 2-6: Product: USB Receiver
[ 78.085621] usb 2-6: Manufacturer: Logitech
** Loaded modules:
Module Size Used by
binfmt_misc 13580 1
nfsd 248360 17
auth_rpcgss 47520 1 nfsd
exportfs 8704 1 nfsd
nfs 251696 0
lockd 68560 2 nfsd,nfs
nfs_acl 7552 2 nfsd,nfs
sunrpc 197480 13 nfsd,auth_rpcgss,nfs,lockd,nfs_acl
ipv6 288328 24
bridge 53544 0
nls_utf8 6272 1
ntfs 188416 1
nls_base 12932 2 nls_utf8,ntfs
fuse 53184 1
w83627ehf 26512 0
hwmon_vid 7296 1 w83627ehf
i2c_dev 10640 0
usbmouse 8704 0
cpufreq_ondemand 11792 1
powernow_k8 17156 1
freq_table 9344 2 cpufreq_ondemand,powernow_k8
snd_hda_intel 434776 1
snd_pcm_oss 41760 0
snd_mixer_oss 18816 1 snd_pcm_oss
snd_pcm 81672 2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy 7428 0
parport_pc 31016 0
parport 41776 1 parport_pc
snd_seq_oss 33152 0
snd_seq_midi 11072 0
snd_rawmidi 26784 1 snd_seq_midi
serio_raw 9860 0
psmouse 42268 0
snd_seq_midi_event 11904 2 snd_seq_oss,snd_seq_midi
pcspkr 7040 0
snd_seq 54304 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
k8temp 9216 0
snd_timer 25744 2 snd_pcm,snd_seq
snd_seq_device 11668 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 63688 11 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 12064 1 snd
snd_page_alloc 13072 2 snd_hda_intel,snd_pcm
i2c_nforce2 10752 0
i2c_core 27936 2 i2c_dev,i2c_nforce2
button 11680 0
evdev 14208 5
ext3 125072 3
jbd 51240 1 ext3
mbcache 12804 1 ext3
sg 36448 0
sr_mod 19652 0
sd_mod 29376 6
cdrom 37928 1 sr_mod
sata_nv 27528 5
ata_generic 10116 0
libata 165472 2 sata_nv,ata_generic
dock 14112 1 libata
usbhid 45792 0
hid 41792 1 usbhid
ff_memless 9224 1 usbhid
usb_storage 94400 0
scsi_mod 160760 5 sg,sr_mod,sd_mod,libata,usb_storage
floppy 61672 0
forcedeth 54032 0
ohci1394 32564 0
ieee1394 93816 1 ohci1394
ide_pci_generic 9220 0 [permanent]
amd74xx 13448 0 [permanent]
ide_core 128284 2 ide_pci_generic,amd74xx
ohci_hcd 25092 0
ehci_hcd 36108 0
thermal 22688 0
processor 42304 2 powernow_k8,thermal
fan 9352 0
thermal_sys 17728 3 thermal,processor,fan
** PCI devices:
00:00.0 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02f4] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81cd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:00.1 RAM memory [0500]: nVidia Corporation C51 Memory Controller 0 [10de:02fa] (rev a2)
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81cd]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.2 RAM memory [0500]: nVidia Corporation C51 Memory Controller 1 [10de:02fe] (rev a2)
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81cd]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.3 RAM memory [0500]: nVidia Corporation C51 Memory Controller 5 [10de:02f8] (rev a2)
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81cd]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.4 RAM memory [0500]: nVidia Corporation C51 Memory Controller 4 [10de:02f9] (rev a2)
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81cd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.5 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02ff] (rev a2)
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81cd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:00.6 RAM memory [0500]: nVidia Corporation C51 Memory Controller 3 [10de:027f] (rev a2)
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81cd]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.7 RAM memory [0500]: nVidia Corporation C51 Memory Controller 2 [10de:027e] (rev a2)
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81cd]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:02.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fc] (rev a1) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:03.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fd] (rev a1) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:04.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fb] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fa900000-fe9fffff
Prefetchable memory behind bridge: 00000000bff00000-00000000dfefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:09.0 RAM memory [0500]: nVidia Corporation MCP51 Host Bridge [10de:0270] (rev a2)
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0260] (rev a2)
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:0a.1 SMBus [0c05]: nVidia Corporation MCP51 SMBus [10de:0264] (rev a2)
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 5
Region 4: I/O ports at 0600 [size=64]
Region 5: I/O ports at 0700 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2
00:0b.0 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026d] (rev a2) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at febbe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:0b.1 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026e] (rev a2) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 23
Region 0: Memory at febbfc00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:0d.0 IDE interface [0101]: nVidia Corporation MCP51 IDE [10de:0265] (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: AMD_IDE
Kernel modules: amd74xx
00:0e.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0266] (rev a1) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at e800 [size=8]
Region 1: I/O ports at e480 [size=4]
Region 2: I/O ports at e400 [size=8]
Region 3: I/O ports at e080 [size=4]
Region 4: I/O ports at e000 [size=16]
Region 5: Memory at febbd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: sata_nv
00:0f.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0267] (rev a1) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=4]
Region 4: I/O ports at d400 [size=16]
Region 5: Memory at febbc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: sata_nv
00:10.0 PCI bridge [0604]: nVidia Corporation MCP51 PCI Bridge [10de:026f] (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition Audio [10de:026c] (rev a2)
Subsystem: nVidia Corporation A8N-VM CSM Mainboard [10de:cb84]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at febb8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:14.0 Bridge [0680]: nVidia Corporation MCP51 Ethernet Controller [10de:0269] (rev a1)
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:8141]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at febb7000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at d080 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
Kernel modules: k8temp
03:00.0 VGA compatible controller [0300]: nVidia Corporation G70 [GeForce 7600 GT] [10de:0391] (rev a1) (prog-if 00 [VGA controller])
Subsystem: CardExpert Technology Device [10b0:0401]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
Region 5: I/O ports at bc00 [size=128]
Expansion ROM at fe9e0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: nvidia, nvidiafb
04:05.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller [1106:3044] (rev 80) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A8V/A8N/P4P800 series motherboard [1043:808a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at cc00 [size=128]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
-- System Information:
Debian Release: 5.0
APT prefers testing
APT policy: (900, 'testing')
Architecture: i386 (x86_64)
Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92n tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.26-1-amd64 recommends no packages.
Versions of packages linux-image-2.6.26-1-amd64 suggests:
ii grub 0.97-47lenny1 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64:
--- End Message ---