[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#525361: marked as done ("bulk_write" too big log writing "bulk_write error" usbcore linux? cups? or hplip?...)

Your message dated Mon, 3 Jun 2013 19:03:10 +0200
with message-id <20130603170310.GC5319@pisco.westfalen.local>
and subject line Closing
has caused the Debian Bug report #525361,
regarding "bulk_write" too big log writing "bulk_write error" usbcore linux?  cups? or hplip?...
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
525361: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=525361
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- Package: linux-image-2.6.29-1-686
Version: 2.6.29-1-686

Package: cups
Version: 1.3.10-1

Package: hplip
Version: 3.9.2-3


I still have the same error, the last kernel was 2.6.26 and now the .29
But i have still this error, i saw something about "bulk_write"
https://bugs.launchpad.net/hplip/+bug/341827
https://bugs.launchpad.net/bugs/344592

This bug start to write that i put on "cat /var/log/syslog" over and over and over... doesn't stop, but when i restart CUPS this error stops, the jobs in the queuque delete for get again working it, i don't know which package have this bad working, linux kernel (usbcore), cups or hplip?....


 
cat /var/log/syslog
Apr 23 16:00:52 Maximiliano HP_LaserJet_P1005?serial=
L403C4P: io/hpmud/musb.c 1022: bulk_write failed buf=0xbfb814cc size=8192 len=-19: No data available
Apr 23 16:00:52 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1384: unable to write data hp:/usb/HP_LaserJet_P1005?serial=L403C4P: No data available

uname -a
Linux Maximiliano 2.6.29-1-686 #1 SMP Fri Apr 17 14:35:16 UTC 2009 i686 GNU/Linux

dmesg
[35421.149186] usb 1-2: USB disconnect, address 18                             
[35422.916048] usb 1-2: new high speed USB device using ehci_hcd and address 19
[35423.069035] usb 1-2: New USB device found, idVendor=03f0, idProduct=3d17
[35423.069049] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[35423.069055] usb 1-2: Product: HP LaserJet P1005
[35423.069059] usb 1-2: Manufacturer: Hewlett-Packard
[35423.069063] usb 1-2: SerialNumber: L403C4P
[35423.069215] usb 1-2: configuration #1 chosen from 1 choice
[35423.075220] usblp0: USB Bidirectional printer dev 19 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3D17
[35427.638307] usblp0: removed
[35432.728059] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd python rqt 128 rq 6 len 255 ret -110
[35453.292176] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd hp rqt 128 rq 6 len 255 ret -110
[35454.248121] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd hpijs rqt 128 rq 6 len 255 ret -110
[35487.637631] usb 1-2: USB disconnect, address 19
[35488.216137] usb 2-2: new full speed USB device using ohci_hcd and address 12
[35488.400556] usb 2-2: device descriptor read/64, error -62
[35488.688069] usb 2-2: device descriptor read/64, error -62
[35488.968092] usb 2-2: new full speed USB device using ohci_hcd and address 13
[35489.152086] usb 2-2: device descriptor read/64, error -62
[35489.436035] usb 2-2: device descriptor read/64, error -62
[35489.660137] hub 2-0:1.0: unable to enumerate USB device on port 2
[35644.748052] usb 1-2: new high speed USB device using ehci_hcd and address 21
[35644.900777] usb 1-2: New USB device found, idVendor=03f0, idProduct=3d17
[35644.900787] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[35644.900790] usb 1-2: Product: HP LaserJet P1005
[35644.900793] usb 1-2: Manufacturer: Hewlett-Packard
[35644.900795] usb 1-2: SerialNumber: L403C4P
[35644.900896] usb 1-2: configuration #1 chosen from 1 choice
[35644.909104] usblp0: USB Bidirectional printer dev 21 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3D17
[35649.226787] usblp0: removed
[36518.443392] usb 1-2: USB disconnect, address 21


lsusb -v
Bus 001 Device 022: ID 03f0:3d17 Hewlett-Packard
Device Descriptor:                              
  bLength                18                     
  bDescriptorType         1                     
  bcdUSB               2.00                     
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0                            
  bDeviceProtocol         0                            
  bMaxPacketSize0        64                            
  idVendor           0x03f0 Hewlett-Packard            
  idProduct          0x3d17                            
  bcdDevice            1.00                            
  iManufacturer           1                            
  iProduct                2 HP LaserJet P1005          
  iSerial                 3 L403C4P                    
  bNumConfigurations      1                            
  Configuration Descriptor:                            
    bLength                 9                          
    bDescriptorType         2                          
    wTotalLength           32                          
    bNumInterfaces          1                          
    bConfigurationValue     1                          
    iConfiguration          0                          
    bmAttributes         0xc0                          
      Self Powered                                     
    MaxPower               98mA                        
    Interface Descriptor:                              
      bLength                 9                        
      bDescriptorType         4                        
      bInterfaceNumber        0                        
      bAlternateSetting       0                        
      bNumEndpoints           2                        
      bInterfaceClass         7 Printer                
      bInterfaceSubClass      1 Printer                
      bInterfaceProtocol      2 Bidirectional          
      iInterface              0                        
      Endpoint Descriptor:                             
        bLength                 7                      
        bDescriptorType         5                      
        bEndpointAddress     0x01  EP 1 OUT            
        bmAttributes            2                      
          Transfer Type            Bulk                
          Synch Type               None                
          Usage Type               Data                
        wMaxPacketSize     0x0200  1x 512 bytes        
        bInterval               0                      
      Endpoint Descriptor:                             
        bLength                 7                      
        bDescriptorType         5                      
        bEndpointAddress     0x81  EP 1 IN             
        bmAttributes            2                      
          Transfer Type            Bulk                
          Synch Type               None                
          Usage Type               Data                
        wMaxPacketSize     0x0200  1x 512 bytes        
        bInterval               0                      
Device Qualifier (for other device speed):             
  bLength                10                            
  bDescriptorType         6                            
  bcdUSB               2.00                            
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0                            
  bDeviceProtocol         0                            
  bMaxPacketSize0        64                            
  bNumConfigurations      1                            
Device Status:     0x0001                              
  Self Powered       

cat /var/log/debug

1005_2                                                                         
Apr 23 16:03:33 Maximiliano hal_lpadmin: Found configured printer: HP_LaserJet_P1005                                                                           
Apr 23 17:20:15 Maximiliano hal_lpadmin: add                                   
Apr 23 17:20:16 Maximiliano hal_lpadmin: URIs: ['hp:/usb/HP_LaserJet_P1005?serial=L403C4P', 'usb://HP/LaserJet%20P1005', 'hal:///org/freedesktop/Hal/devices/usb_device_3f0_3d17_L403C4P_if0_printer_noserial']                                
Apr 23 17:20:16 Maximiliano hal_lpadmin: HPLIP Fax URIs: None                  
Apr 23 17:20:16 Maximiliano hal_lpadmin: Not adding printer: HP_LaserJet_P1005_2 already exists                                                                
Apr 23 17:20:16 Maximiliano hal_lpadmin: Not adding printer: HP_LaserJet_P1005 already exists                                                                  
Apr 23 17:20:18 Maximiliano hal_lpadmin: remove                                
Apr 23 17:20:18 Maximiliano hal_lpadmin: Found configured printer: HP_LaserJet_P1005_2                                                                         
Apr 23 17:20:18 Maximiliano hal_lpadmin: Found configured printer: HP_LaserJet_P1005                                                                           
Apr 23 17:20:29 Maximiliano kernel: [40266.924146] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd lsusb rqt 128 rq 6 len 255 ret -110   

---------- Forwarded message ----------
From: Maximi89 <maximi89@gmail.com>
Date: 2009/4/23
Subject: Re: [Bug 344592] Re: Unkown Error 1018. I Can't Print, the printers looks fine, HP-toolbox show the info... but doesn't print nothing, and CUPS say the print file was completed...
To: Bug 344592 <344592@bugs.launchpad.net>




2009/4/7 Maximi89 <maximi89@gmail.com>


2009/4/7 Maximi89 <maximi89@gmail.com>



2009/3/30 Aaron Albright <ke7ezt@gmail.com>

Not a debian defect.

Aaron

** Changed in: debian
      Status: New => Invalid

** Changed in: hplip
      Status: New => Invalid

** bug changed to question:
  https://answers.launchpad.net/hplip/+question/65890

--
Unkown Error 1018. I Can't Print, the printers looks fine, HP-toolbox show the info... but doesn't print nothing, and CUPS say the print file was completed...
https://bugs.launchpad.net/bugs/344592
You received this bug notification because you are a direct subscriber
of the bug.

Ok, i get the info again... here we go...


maximi89@Maximiliano:~$ /usr/lib/cups/backend/hp
direct hp:/usb/HP_LaserJet_P1005?serial=L403C4P "HP LaserJet P1005" "HP LaserJet P1005 USB L403C4P HPLIP" "MFG:HP;MDL:HP LaserJet P1005;CLS:PRINTER;DES:HP LaserJet P1005;SN:L403C4P;"

CAT /var/log/syslog
Apr  7 22:24:49 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1022: bulk_write failed buf=0xbf9a236c size=4096 len=-19: Invalid argument
Apr  7 22:24:49 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1384: unable to write data hp:/usb/HP_LaserJet_P1005?serial=L403C4P: Invalid argument
Apr  7 22:24:49 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1022: bulk_write failed buf=0xbf9a236c size=4096 len=-19: Invalid argument
Apr  7 22:24:49 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1384: unable to write data hp:/usb/HP_LaserJet_P1005?serial=L403C4P: Invalid argument
Apr  7 22:24:49 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1022: bulk_write failed buf=0xbf9a236c size=4096 len=-19: Invalid argument
Apr  7 22:24:49 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1384: unable to write data hp:/usb/HP_LaserJet_P1005?serial=L403C4P: Invalid argument
Apr  7 22:24:49 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1022: bulk_write failed buf=0xbf9a236c size=4096 len=-19: Invalid argument
Apr  7 22:24:49 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1384: unable to write data hp:/usb/HP_LaserJet_P1005?serial=L403C4P: Invalid argument
 

CAT /var/log/syslog

04: unable to open hp:/usb/HP_LaserJet_P1005?serial=L403C4P
Apr  6 23:23:18 Maximiliano HP_LaserJet_P1005?serial=L403C4P: prnt/backend/hp.c 676: INFO: open device failed stat=12; will retry in 30 seconds...
Apr  6 23:23:48 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1104: unable to open hp:/usb/HP_LaserJet_P1005?serial=L403C4P
Apr  6 23:23:48 Maximiliano HP_LaserJet_P1005?serial=L403C4P: prnt/backend/hp.c 676: INFO: open device failed stat=12; will retry in 30 seconds...
Apr  6 23:24:18 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1104: unable to open hp:/usb/HP_LaserJet_P1005?serial=L403C4P
Apr  6 23:24:18 Maximiliano HP_LaserJet_P1005?serial=L403C4P: prnt/backend/hp.c 676: INFO: open device failed stat=12; will retry in 30 seconds...
Apr  6 23:24:48 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1104: unable to open hp:/usb/HP_LaserJet_P1005?serial=L403C4P
Apr  6 23:24:48 Maximiliano HP_LaserJet_P1005?serial=L403C4P: prnt/backend/hp.c 676: INFO: open device failed stat=12; will retry in 30 seconds...
Apr  6 23:25:18 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1104: unable to open hp:/usb/HP_LaserJet_P1005?serial=L403C4P
Apr  6 23:25:18 Maximiliano HP_LaserJet_P1005?serial=L403C4P: prnt/backend/hp.c 676: INFO: open device failed stat=12; will retry in 30 seconds...
Apr  6 23:25:48 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1104: unable to open hp:/usb/HP_LaserJet_P1005?serial=L403C4P
Apr  6 23:25:48 Maximiliano HP_LaserJet_P1005?serial=L403C4P: prnt/backend/hp.c 676: INFO: open device failed stat=12; will retry in 30 seconds...
 



Dmesg

[20950.551087] sd 1:0:0:0: [sdb] Starting disk
[20950.568010] sd 2:0:0:0: [sdc] Starting disk
[20951.108029] usb 2-7: reset low speed USB device using ohci_hcd and address 3
[20951.808022] usb 2-9: reset low speed USB device using ohci_hcd and address 4
[20952.216303] Restarting tasks ... done.
[20952.460047] usb 1-8: new high speed USB device using ehci_hcd and address 5
[20952.541461] dmfe: Change Speed to 100Mhz full duplex
[20952.613234] usb 1-8: configuration #1 chosen from 1 choice
[20952.613420] usb 1-8: New USB device found, idVendor=03f0, idProduct=3d17
[20952.613424] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20952.613426] usb 1-8: Product: HP LaserJet P1005
[20952.613429] usb 1-8: Manufacturer: Hewlett-Packard
[20952.613431] usb 1-8: SerialNumber: L403C4P
[20959.338527] usb 1-8: USB disconnect, address 5
[27803.632117] usb 1-8: new high speed USB device using ehci_hcd and address 6
[27803.784817] usb 1-8: configuration #1 chosen from 1 choice
[27803.785132] usb 1-8: New USB device found, idVendor=03f0, idProduct=3d17
[27803.785135] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[27803.785138] usb 1-8: Product: HP LaserJet P1005
[27803.785140] usb 1-8: Manufacturer: Hewlett-Packard
[27803.785143] usb 1-8: SerialNumber: L403C4P

cat /var/log/cups/error_log

D [06/Apr/2009:23:30:33 -0400] cupsdCloseClient: 22
D [06/Apr/2009:23:30:33 -0400] cupsdReadClient: 19 POST / HTTP/1.1
D [06/Apr/2009:23:30:33 -0400] cupsdAuthorize: No authentication data provided.
D [06/Apr/2009:23:30:33 -0400] Get-Printer-Attributes ipp://localhost/printers/HP_LaserJet_P1005
D [06/Apr/2009:23:30:33 -0400] cupsdProcessIPPRequest: 19 status_code=0 (successful-ok)
D [06/Apr/2009:23:30:33 -0400] cupsdCloseClient: 19
D [06/Apr/2009:23:30:43 -0400] cupsdAcceptClient: 19 from localhost (Domain)
D [06/Apr/2009:23:30:43 -0400] cupsdAcceptClient: 22 from localhost (Domain)
D [06/Apr/2009:23:30:43 -0400] cupsdCloseClient: 19
D [06/Apr/2009:23:30:43 -0400] cupsdAcceptClient: 19 from localhost (Domain)
D [06/Apr/2009:23:30:43 -0400] cupsdCloseClient: 22
D [06/Apr/2009:23:30:43 -0400] cupsdAcceptClient: 22 from localhost (Domain)
D [06/Apr/2009:23:30:43 -0400] cupsdCloseClient: 19
D [06/Apr/2009:23:30:43 -0400] cupsdCloseClient: 22
D [06/Apr/2009:23:30:48 -0400] [Job 167] prnt/backend/hp.c 676: INFO: open device failed stat=12; will retry in 30 seconds...
D [06/Apr/2009:23:30:53 -0400] cupsdAcceptClient: 19 from localhost (Domain)
D [06/Apr/2009:23:30:53 -0400] cupsdAcceptClient: 22 from localhost (Domain)
D [06/Apr/2009:23:30:53 -0400] cupsdCloseClient: 19
D [06/Apr/2009:23:30:53 -0400] cupsdAcceptClient: 19 from localhost (Domain)
D [06/Apr/2009:23:30:53 -0400] cupsdCloseClient: 22
D [06/Apr/2009:23:30:53 -0400] cupsdAcceptClient: 22 from localhost (Domain)
D [06/Apr/2009:23:30:53 -0400] cupsdCloseClient: 19
D [06/Apr/2009:23:30:53 -0400] cupsdAcceptClient: 19 from localhost (Domain)
D [06/Apr/2009:23:30:53 -0400] cupsdCloseClient: 22
D [06/Apr/2009:23:30:53 -0400] cupsdReadClient: 19 POST / HTTP/1.1
D [06/Apr/2009:23:30:53 -0400] cupsdAuthorize: No authentication data provided.
D [06/Apr/2009:23:30:53 -0400] Get-Jobs ipp://localhost/printers/HP_LaserJet_P1005_2
D [06/Apr/2009:23:30:53 -0400] cupsdProcessIPPRequest: 19 status_code=0 (successful-ok)
D [06/Apr/2009:23:30:53 -0400] cupsdReadClient: 19 POST / HTTP/1.1
D [06/Apr/2009:23:30:53 -0400] cupsdAuthorize: No authentication data provided.
D [06/Apr/2009:23:30:53 -0400] Get-Printer-Attributes ipp://localhost/printers/HP_LaserJet_P1005_2
D [06/Apr/2009:23:30:53 -0400] cupsdProcessIPPRequest: 19 status_code=0 (successful-ok)
D [06/Apr/2009:23:30:53 -0400] cupsdCloseClient: 19


cat /var/log/debug

 00 3a 00 00
Apr  5 22:41:43 Maximiliano kernel: [15388.484648] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Apr  5 22:41:43 Maximiliano kernel: [15388.516885] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Apr  6 21:14:33 Maximiliano kernel: [20949.940204] ACPI handle has no context!
Apr  6 21:14:33 Maximiliano kernel: [20949.960008] PCI: Setting latency timer of device 0000:00:02.0 to 64
Apr  6 21:14:33 Maximiliano kernel: [20950.015658] PCI: Setting latency timer of device 0000:00:02.1 to 64
Apr  6 21:14:33 Maximiliano kernel: [20950.015683] PCI: cache line size of 64 is not supported by device 0000:00:02.1
Apr  6 21:14:33 Maximiliano kernel: [20950.015697] PM: Writing back config space on device 0000:00:04.0 at offset 1 (was b00007, writing b00003)
Apr  6 21:14:33 Maximiliano kernel: [20950.015707] PCI: Setting latency timer of device 0000:00:04.0 to 64
Apr  6 21:14:33 Maximiliano kernel: [20950.023714] PM: Writing back config space on device 0000:00:07.0 at offset 1 (was b00003, writing b00007)
Apr  6 21:14:33 Maximiliano kernel: [20950.023723] PCI: Setting latency timer of device 0000:00:07.0 to 64
Apr  6 21:14:33 Maximiliano kernel: [20950.023745] PM: Writing back config space on device 0000:00:08.0 at offset 1 (was b00003, writing b00007)
Apr  6 21:14:33 Maximiliano kernel: [20950.023754] PCI: Setting latency timer of device 0000:00:08.0 to 64
Apr  6 21:14:33 Maximiliano kernel: [20950.023770] PCI: Setting latency timer of device 0000:00:09.0 to 64
Apr  6 21:14:33 Maximiliano kernel: [20950.023794] PCI: Setting latency timer of device 0000:00:0d.0 to 64
Apr  6 21:14:33 Maximiliano kernel: [20950.023817] PCI: Setting latency timer of device 0000:00:0e.0 to 64
Apr  6 21:14:33 Maximiliano kernel: [20950.037645] PM: Writing back config space on device 0000:01:08.0 at offset 1 (was 2100003, writing 2100007)
Apr  6 21:14:33 Maximiliano kernel: [20950.439739] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Apr  6 21:14:33 Maximiliano kernel: [20950.512312] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Apr  6 21:14:33 Maximiliano kernel: [20950.520414] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Apr  6 21:14:33 Maximiliano kernel: [20950.551087] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00


uname -a
Linux Maximiliano 2.6.26-1-686 #1 SMP Sat Jan 10 18:29:31 UTC 2009 i686 GNU/Linux

cat /var/log/user.log

04: unable to open hp:/usb/HP_LaserJet_P1005?serial=L403C4P
Apr  6 23:32:48 Maximiliano HP_LaserJet_P1005?serial=L403C4P: prnt/backend/hp.c 676: INFO: open device failed stat=12; will retry in 30 seconds...
Apr  6 23:33:18 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1104: unable to open hp:/usb/HP_LaserJet_P1005?serial=L403C4P
Apr  6 23:33:18 Maximiliano HP_LaserJet_P1005?serial=L403C4P: prnt/backend/hp.c 676: INFO: open device failed stat=12; will retry in 30 seconds...
Apr  6 23:33:48 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1104: unable to open hp:/usb/HP_LaserJet_P1005?serial=L403C4P
Apr  6 23:33:48 Maximiliano HP_LaserJet_P1005?serial=L403C4P: prnt/backend/hp.c 676: INFO: open device failed stat=12; will retry in 30 seconds...
Apr  6 23:34:18 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1104: unable to open hp:/usb/HP_LaserJet_P1005?serial=L403C4P
Apr  6 23:34:18 Maximiliano HP_LaserJet_P1005?serial=L403C4P: prnt/backend/hp.c 676: INFO: open device failed stat=12; will retry in 30 seconds...

hp-firmware

Using device: hp:/usb/HP_LaserJet_P1005?serial=L403C4P

error: Unable to communicate with device (code=12): hp:/usb/HP_LaserJet_P1005?serial=L403C4P

error:  Unable to communicate with device or device is in an error state.  Please check device setup and try again.


lsusb

maximi89@Maximiliano:~$ lsusb
Bus 002 Device 003: ID 15d9:0a33
Bus 002 Device 004: ID 0d62:001c Darfon Electronics Corp.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 011: ID 03f0:3d17 Hewlett-Packard
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub



Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.26-1-686 ohci_hcd
  iProduct                2 OHCI Host Controller
  iSerial                 1 0000:00:02.0

  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25

    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA

    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub

      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt

          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength              11
  bDescriptorType      41
  nNbrPorts            10
  wHubCharacteristic 0x0002
    No power switching (usb 1.0)
    Ganged overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00 0x00
  PortPwrCtrlMask    0xff 0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
   Port 5: 0000.0100 power
   Port 6: 0000.0100 power
   Port 7: 0000.0303 lowspeed power enable connect
   Port 8: 0000.0100 power
   Port 9: 0000.0303 lowspeed power enable connect
   Port 10: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 001 Device 011: ID 03f0:3d17 Hewlett-Packard

Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x03f0 Hewlett-Packard
  idProduct          0x3d17
  bcdDevice            1.00
  iManufacturer           1 Hewlett-Packard
  iProduct                2 HP LaserJet P1005
  iSerial                 3 L403C4P
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xc0
      Self Powered
    MaxPower               98mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         7 Printer
      bInterfaceSubClass      1 Printer
      bInterfaceProtocol      2 Bidirectional
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0001
  Self Powered

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.26-1-686 ehci_hcd
  iProduct                2 EHCI Host Controller
  iSerial                 1 0000:00:02.1

  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25

    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA

    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub

      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt

          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength              11
  bDescriptorType      41
  nNbrPorts            10
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00 0x00
  PortPwrCtrlMask    0xff 0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
   Port 5: 0000.0100 power
   Port 6: 0000.0100 power
   Port 7: 0000.0100 power
   Port 8: 0000.0503 highspeed power enable connect
   Port 9: 0000.0100 power
   Port 10: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled



NOW
i make a change in /etc/udev/udev.conf from "err" to "debug"... and restart the service...

Apr  6 23:08:35 Maximiliano kernel: [27803.632117] usb 1-8: new high speed USB device using ehci_hcd and address 6
Apr  6 23:08:35 Maximiliano kernel: [27803.784817] usb 1-8: configuration #1 chosen from 1 choice
Apr  6 23:08:35 Maximiliano kernel: [27803.785132] usb 1-8: New USB device found, idVendor=03f0, idProduct=3d17
Apr  6 23:08:35 Maximiliano kernel: [27803.785135] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr  6 23:08:35 Maximiliano kernel: [27803.785138] usb 1-8: Product: HP LaserJet P1005
Apr  6 23:08:35 Maximiliano kernel: [27803.785140] usb 1-8: Manufacturer: Hewlett-Packard
Apr  6 23:08:35 Maximiliano kernel: [27803.785143] usb 1-8: SerialNumber: L403C4P
Apr  6 23:13:15 Maximiliano cupsd[12340]: *** WARNING *** The program 'cupsd' uses the Apple Bonjour compatibility layer of Avahi.
Apr  6 23:13:15 Maximiliano cupsd[12340]: *** WARNING *** Please fix your application to use the native API of Avahi!
Apr  6 23:13:15 Maximiliano cupsd[12340]: *** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libdns_sd&e=cupsd>
Apr  6 23:17:11 Maximiliano cupsd[1446]: *** WARNING *** The program 'cupsd' uses the Apple Bonjour compatibility layer of Avahi.
Apr  6 23:17:11 Maximiliano cupsd[1446]: *** WARNING *** Please fix your application to use the native API of Avahi!
Apr  6 23:17:11 Maximiliano cupsd[1446]: *** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libdns_sd&e=cupsd>
Apr  6 23:26:16 Maximiliano python: hp-toolbox(UI)[1771]: warning: Supplies information not available for this device.
Apr  6 23:37:18 Maximiliano kernel: [29526.649492] udevd version 125 started



the error now is 5012...
--
Maximiliano Augusto Castañón Araneda
Santiago, Chile
Linux user # 394821



--
Maximiliano Augusto Castañón Araneda
Santiago, Chile
Linux user # 394821



--
Maximiliano Augusto Castañón Araneda
Santiago, Chile
Linux user # 394821



--
Maximiliano Augusto Castañón Araneda
Santiago, Chile
Linux user # 394821

--- End Message ---
--- Begin Message --- 
Hi,
your bug has been filed against the "linux-2.6" source package and was filed for
a kernel older than the recently released Debian 7.0 / Wheezy with a severity
less than important.

We don't have the ressources to reproduce the complete backlog of all older kernel
bugs, so we're closing this bug for now. If you can reproduce the bug with Debian Wheezy
or a more recent kernel from testing or unstable, please reopen the bug by sending
a mail to control@bugs.debian.org with the following three commands included in the
mail:

reopen BUGNUMBER
reassign BUGNUMBER src:linux
thanks

Cheers,
        Moritz

--- End Message ---
Reply to: