--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: vmlinuz: cannot mount partition
- From: Michal Suchanek <michal.suchanek@ruk.cuni.cz>
- Date: Thu, 23 Apr 2009 15:16:54 +0000
- Message-id: <20090423151654.6006.46136.reportbug@debian-ghost>
Package: linux-image-2.6.26-1-486
Version: 2.6.26-13
Severity: normal
File: vmlinuz
There's certainly some reason why the partition cannot be mounted but
mount does not tell nor does dmesg.
# mount /dev/sda1 /mnt
mount: /dev/sda1 already mounted or /mnt busy
debian-ghost:~# cat /proc/mounts
rootfs / rootfs rw 0 0
none /sys sysfs rw,nosuid,nodev,noexec 0 0
none /proc proc rw,nosuid,nodev,noexec 0 0
udev /dev tmpfs rw,size=10240k,mode=755 0 0
ram /live/image ramfs rw 0 0
httpfs /live/image/live fuse.httpfs rw,nosuid,nodev,user_id=0,group_id=0
0 0
/dev/loop0 /filesystem.squashfs squashfs ro,noatime 0 0
tmpfs /live/cow tmpfs rw,noatime,mode=755 0 0
aufs / aufs
rw,si=1315af5,xino=/live/cow/.aufs.xino,br:/live/cow=rw:/filesystem.squashfs=rr
0 0
tmpfs /live tmpfs rw 0 0
tmpfs /lib/init/rw tmpfs rw,nosuid,mode=755 0 0
usbfs /proc/bus/usb usbfs rw,nosuid,nodev,noexec 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0
devpts /dev/pts devpts rw,nosuid,noexec,gid=5,mode=620 0 0
fusectl /sys/fs/fuse/connections fusectl rw 0 0
tmpfs /tmp tmpfs rw,nosuid,nodev 0 0
//handyman/netghost /home/ghost/mnt cifs
rw,mand,nosuid,nodev,unc=\\handyman\netghost,username=mghost,uid=1000,gid=1000,file_mode=02767,dir_mode=0777,rsize=16384,wsize=57344
0 0
-- Package-specific info:
** Version:
Linux version 2.6.26-1-486 (Debian 2.6.26-13) (michal.suchanek@ruk.cuni.cz) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 Thu Feb 12 00:35:28 CET 2009
** Command line:
initrd=initrd1.img boot=live xdebconf g username=ghost hostname=debian-ghost union=aufs quickreboot httpfs=http://195.113.15.10/filesystem.squashfs vga=792 splash quiet BOOT_IMAGE=vmlinuz1
** Not tainted
** Kernel log:
[ 5.600008] ata4.00: ATA-8: WDC WD10EACS-00ZJB0, 01.01B01, max UDMA/133
[ 5.600008] ata4.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 5.600008] ata4.00: configured for UDMA/133
[ 5.936021] ata5: SATA link down (SStatus 0 SControl 300)
[ 6.436014] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.439910] ata6.00: ATAPI: HL-DT-ST BD-RE GGW-H20L, YL02, max UDMA/133
[ 6.444007] ata6.00: configured for UDMA/133
[ 6.460085] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72101 GKAO PQ: 0 ANSI: 5
[ 6.460182] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 6.460244] scsi 2:0:0:0: Direct-Access ATA ST31000340SV SV16 PQ: 0 ANSI: 5
[ 6.460306] scsi 3:0:0:0: Direct-Access ATA WDC WD10EACS-00Z 01.0 PQ: 0 ANSI: 5
[ 6.463421] scsi 5:0:0:0: CD-ROM HL-DT-ST BD-RE GGW-H20L YL02 PQ: 0 ANSI: 5
[ 6.472983] Driver 'sd' needs updating - please use bus_type methods
[ 6.480020] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
[ 6.480029] sd 0:0:0:0: [sda] Write Protect is off
[ 6.480031] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.480043] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.480074] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
[ 6.480081] sd 0:0:0:0: [sda] Write Protect is off
[ 6.480083] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.480095] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.480098] sda: sda1
[ 6.497827] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.497859] sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
[ 6.497867] sd 1:0:0:0: [sdb] Write Protect is off
[ 6.497868] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.497880] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.497904] sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
[ 6.497912] sd 1:0:0:0: [sdb] Write Protect is off
[ 6.497913] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.497925] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.497927] sdb:<4>Driver 'sr' needs updating - please use bus_type methods
[ 6.505544] sdb1
[ 6.505582] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 6.505612] sd 2:0:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB)
[ 6.505620] sd 2:0:0:0: [sdc] Write Protect is off
[ 6.505622] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 6.505634] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.505658] sd 2:0:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB)
[ 6.505665] sd 2:0:0:0: [sdc] Write Protect is off
[ 6.505666] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 6.505678] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.505680] sdc: sdc1
[ 6.536845] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 6.536845] sd 3:0:0:0: [sdd] 1953523055 512-byte hardware sectors (1000204 MB)
[ 6.536845] sd 3:0:0:0: [sdd] Write Protect is off
[ 6.536845] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 6.536845] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.536845] sd 3:0:0:0: [sdd] 1953523055 512-byte hardware sectors (1000204 MB)
[ 6.536845] sd 3:0:0:0: [sdd] Write Protect is off
[ 6.536845] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 6.536845] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.536845] sdd: sdd1
[ 6.550311] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 6.779647] device-mapper: uevent: version 1.0.3
[ 6.779930] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.779933] Uniform CD-ROM driver Revision: 3.20
[ 6.779971] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 6.786200] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.786213] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 6.786225] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 6.786237] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 6.786247] sr 5:0:0:0: Attached scsi generic sg4 type 5
[ 6.787398] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 7.850687] Uniform Multi-Platform E-IDE driver
[ 7.850690] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 7.851442] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 7.851447] Probing IDE interface ide0...
[ 8.412036] Probing IDE interface ide1...
[ 8.972043] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 8.972056] ide1 at 0x170-0x177,0x376 on irq 15
[ 10.045912] sky2 eth0: enabling interface
[ 11.750878] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 14.287277] fuse init (API version 7.9)
[ 14.300691] aufs 20080714
[ 14.310530] loop: module loaded
[ 14.370291] squashfs: version 3.3-CVS (2008/04/04) Phillip Lougher
[ 22.473604] udevd version 125 started
[ 23.367026] Linux agpgart interface v0.103
[ 23.463580] input: Power Button (FF) as /class/input/input2
[ 23.492028] ACPI: Power Button (FF) [PWRF]
[ 23.492079] input: Power Button (CM) as /class/input/input3
[ 23.520035] ACPI: Power Button (CM) [PWRB]
[ 24.235784] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 24.235829] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
[ 24.235851] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 24.270067] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 24.270085] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 24.368181] phy0: Selected rate control algorithm 'pid'
[ 24.720831] phy0: hwaddr 00:15:af:22:3e:16, rtl8187 V1 + rtl8225z2
[ 24.720852] usbcore: registered new interface driver rtl8187
[ 24.728194] input: PC Speaker as /class/input/input4
[ 24.759241] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
[ 25.541070] NET: Registered protocol family 10
[ 25.541295] lo: Disabled Privacy Extensions
[ 26.433861] r8169: eth1: link up
[ 36.432013] eth0: no IPv6 routers present
[ 36.944016] eth1: no IPv6 routers present
[ 695.583416] CIFS: Unknown mount option utf8
[ 809.960008] NTFS driver 2.1.29 [Flags: R/W MODULE].
** Loaded modules:
Module Size Used by
ntfs 180416 0
nls_utf8 1792 1
cifs 206064 1
nls_base 6528 3 ntfs,nls_utf8,cifs
ipv6 225172 8
dm_crypt 11012 0
md_mod 65940 0
i2c_i801 7824 0
pcspkr 2304 0
arc4 1792 2
i2c_core 19728 1 i2c_i801
ecb 2560 2
crypto_blkcipher 14724 2 dm_crypt,ecb
snd_hda_intel 323992 0
iTCO_wdt 9248 0
snd_pcm_oss 32544 0
snd_mixer_oss 12288 1 snd_pcm_oss
snd_pcm 60680 2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy 2692 0
snd_seq_oss 24832 0
snd_seq_midi 5664 0
snd_rawmidi 18592 1 snd_seq_midi
rtl8187 26880 0
snd_seq_midi_event 6528 2 snd_seq_oss,snd_seq_midi
snd_seq 40784 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 17668 2 snd_pcm,snd_seq
snd_seq_device 6412 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 44964 9 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
mac80211 137756 1 rtl8187
eeprom_93cx6 2176 1 rtl8187
soundcore 6112 1 snd
snd_page_alloc 7816 2 snd_hda_intel,snd_pcm
cfg80211 21384 2 rtl8187,mac80211
button 6032 0
intel_agp 22204 0
agpgart 28336 1 intel_agp
evdev 7808 3
battery 10116 0
squashfs 35976 1
zlib_inflate 14080 1 squashfs
loop 12428 2
aufs 108304 1
exportfs 3712 1 aufs
fuse 41116 3
ide_generic 2432 0 [permanent]
ide_core 95144 1 ide_generic
dm_mirror 14720 1
dm_log 8192 2 dm_mirror
sg 27440 0
dm_mod 45384 10 dm_crypt,dm_mirror,dm_log
sr_mod 13092 0
cdrom 30240 1 sr_mod
sd_mod 22032 4
usbhid 35712 0
hid 32128 1 usbhid
ff_memless 4232 1 usbhid
floppy 47620 0
ahci 23564 4
libata 141088 1 ahci
scsi_mod 129804 4 sg,sr_mod,sd_mod,libata
dock 8076 1 libata
r8169 23556 0
ohci1394 25136 0
ieee1394 75832 1 ohci1394
sky2 36740 0
ehci_hcd 28300 0
uhci_hcd 18448 0
usbcore 117616 5 rtl8187,usbhid,ehci_hcd,uhci_hcd
thermal 15132 0
processor 28080 1 thermal
fan 4100 0
thermal_sys 10784 3 thermal,processor,fan
atl2 22424 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8295]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fa000000-fe9fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at b800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at b880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at bc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f9fffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f9ff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Prefetchable memory behind bridge: 00000000f8f00000-00000000f8ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at b080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at b400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f9fff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000f0100000-00000000f01fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface Controller [8086:2916] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 SATA RAID Controller [8086:2822] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 219
Region 0: I/O ports at ac00 [size=8]
Region 1: I/O ports at a880 [size=4]
Region 2: I/O ports at a800 [size=8]
Region 3: I/O ports at a480 [size=4]
Region 4: I/O ports at a400 [size=32]
Region 5: Memory at f9ffe800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f9fff400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8800 GT [10de:0611] (rev a2) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8261]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at cc00 [size=128]
Expansion ROM at fe9e0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: nvidiafb
02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller [11ab:4364] (rev 12)
Subsystem: ASUSTeK Computer Inc. Device [1043:81f8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 220
Region 0: Memory at feafc000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at d800 [size=256]
[virtual] Expansion ROM at f0000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2
Kernel modules: sky2
04:03.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW323 [11c1:5811] (rev 70) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8294]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
04:04.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet [10ec:8167] (rev 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:820d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at febfec00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at f0100000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
-- System Information:
Debian Release: 5.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-486
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-486 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.26-1-486 recommends no packages.
Versions of packages linux-image-2.6.26-1-486 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
ii lilo 1:22.8-7 LInux LOader - The Classic OS load
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-486/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-486/preinst/overwriting-modules-2.6.26-1-486: true
linux-image-2.6.26-1-486/preinst/abort-overwrite-2.6.26-1-486:
linux-image-2.6.26-1-486/postinst/old-system-map-link-2.6.26-1-486: true
linux-image-2.6.26-1-486/prerm/removing-running-kernel-2.6.26-1-486: true
linux-image-2.6.26-1-486/preinst/failed-to-move-modules-2.6.26-1-486:
linux-image-2.6.26-1-486/postinst/old-initrd-link-2.6.26-1-486: true
linux-image-2.6.26-1-486/preinst/abort-install-2.6.26-1-486:
linux-image-2.6.26-1-486/postinst/create-kimage-link-2.6.26-1-486: true
linux-image-2.6.26-1-486/postinst/bootloader-test-error-2.6.26-1-486:
linux-image-2.6.26-1-486/preinst/bootloader-initrd-2.6.26-1-486: true
linux-image-2.6.26-1-486/preinst/elilo-initrd-2.6.26-1-486: true
linux-image-2.6.26-1-486/preinst/initrd-2.6.26-1-486:
linux-image-2.6.26-1-486/postinst/bootloader-error-2.6.26-1-486:
linux-image-2.6.26-1-486/preinst/lilo-initrd-2.6.26-1-486: true
linux-image-2.6.26-1-486/postinst/depmod-error-2.6.26-1-486: false
linux-image-2.6.26-1-486/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-486/prerm/would-invalidate-boot-loader-2.6.26-1-486: true
linux-image-2.6.26-1-486/postinst/old-dir-initrd-link-2.6.26-1-486: true
linux-image-2.6.26-1-486/postinst/depmod-error-initrd-2.6.26-1-486: false
--- End Message ---