Bug#703485: linux-image-3.8-trunk-amd64: Battery not detected on Dell Latitude E5530
Package: src:linux
Version: 3.8.3-1~experimental.1
Severity: normal
Dear Maintainer,
While trying to resolve stability issues with the testing linux image,
I tried kernel 3.8 in experimental. I fully understand that this kernel
may not be used in production. However, when booting with this kernel,
the battery is not detected (and thus, laptop-detect thinks that it is
a desktop computer, which it is not). Of course, no /proc/acpi/BAT0 is
created, which makes system tools not work. I think the problem lies
in the kernel because of this.
The first significant difference that I see in the logs is:
-ACPI Error: [DCK9] Namespace lookup failure, AE_ALREADY_EXISTS (20121018/dswload2-330)
-ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20121018/psloop-259)
-ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.LPTE.CLPS] (Node ffff880215491c18), AE_ALREADY_EXISTS (20121018/psparse-537)
-ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.LPTE._STA] (Node ffff880215491bf0), AE_ALREADY_EXISTS (20121018/psparse-537)
-ACPI Error: Method execution failed [\_SB_.PCI0.LPCB.LPTE._STA] (Node ffff880215491bf0), AE_ALREADY_EXISTS (20121018/uteval-103)
-ACPI: Marking method CLPS as Serialized because of AE_ALREADY_EXISTS error
-parport_pc 00:0b: reported by Plug and Play ACPI
-ACPI: AC Adapter [AC] (off-line)
-ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20121018/evregion-501)
-ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff88021548f650), AE_TIME (20121018/psparse-537)
-ACPI Error: Method parse/execution failed [\ECRB] (Node ffff88021548f4e8), AE_TIME (20121018/psparse-537)
-ACPI Error: Method parse/execution failed [\ECG5] (Node ffff88021548f380), AE_TIME (20121018/psparse-537)
-ACPI Error: Method parse/execution failed [\_SB_.AC__._PSR] (Node ffff88021548fb00), AE_TIME (20121018/psparse-537)
-ACPI Exception: AE_TIME, Error reading AC Adapter state (20121018/ac-122)
while in 3.2 I get:
+ACPI: Battery Slot [BAT0] (battery present)
+ACPI: Battery Slot [BAT1] (battery absent)
+ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20110623/evregion-478)
+ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff880215488650), AE_TIME (20110623/psparse-536)
+ACPI Error: Method parse/execution failed [\ECRB] (Node ffff8802154884e8), AE_TIME (20110623/psparse-536)
+ACPI Error: Method parse/execution failed [\ECG5] (Node ffff880215488380), AE_TIME (20110623/psparse-536)
+ACPI Error: Method parse/execution failed [\_SB_.AC__._PSR] (Node ffff880215488b00), AE_TIME (20110623/psparse-536)
+ACPI Exception: AE_TIME, Error reading AC Adapter state (20110623/ac-118)
As this laptop is not used intensively right now, I am willing to do any tests one knowledgeable may advice me to do.
Sincerly,
-- Package-specific info:
** Version:
Linux version 3.8-trunk-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.8.3-1~experimental.1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.8-trunk-amd64 root=UUID=fe7f02bc-039b-4879-9aeb-10264d8241ef ro quiet
** Not tainted
** Kernel log:
[ 2.383747] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 2.394430] cfg80211: World regulatory domain updated:
[ 2.394433] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2.394435] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.394437] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.394438] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.394440] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.394441] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.401158] parport_pc 00:0b: activated
[ 2.401164] parport_pc 00:0b: reported by Plug and Play ACPI
[ 2.401294] parport_pc 00:0b: disabled
[ 3.053757] fbcon: inteldrmfb (fb0) is primary device
[ 3.125972] ACPI: AC Adapter [AC] (off-line)
[ 3.821214] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 3.957614] Console: switching to colour frame buffer device 240x67
[ 3.970247] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.970251] i915 0000:00:02.0: registered panic notifier
[ 4.108773] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20121018/evregion-501)
[ 4.108788] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff88021548f650), AE_TIME (20121018/psparse-537)
[ 4.108801] ACPI Error: Method parse/execution failed [\ECRB] (Node ffff88021548f4e8), AE_TIME (20121018/psparse-537)
[ 4.108809] ACPI Error: Method parse/execution failed [\ECG5] (Node ffff88021548f380), AE_TIME (20121018/psparse-537)
[ 4.108816] ACPI Error: Method parse/execution failed [\_SB_.AC__._PSR] (Node ffff88021548fb00), AE_TIME (20121018/psparse-537)
[ 4.108835] ACPI Exception: AE_TIME, Error reading AC Adapter state (20121018/ac-122)
[ 4.325167] psmouse serio1: Failed to enable mouse on isa0060/serio1
[ 4.608718] ACPI: EC: input buffer is not empty, aborting transaction
[ 4.608819] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20121018/evregion-501)
[ 4.608830] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff88021548f650), AE_TIME (20121018/psparse-537)
[ 4.608842] ACPI Error: Method parse/execution failed [\ECRB] (Node ffff88021548f4e8), AE_TIME (20121018/psparse-537)
[ 4.608850] ACPI Error: Method parse/execution failed [\ECG5] (Node ffff88021548f380), AE_TIME (20121018/psparse-537)
[ 4.608857] ACPI Error: Method parse/execution failed [\_SB_.AC__._PSR] (Node ffff88021548fb00), AE_TIME (20121018/psparse-537)
[ 4.608873] ACPI Exception: AE_TIME, Error reading AC Adapter state (20121018/ac-122)
[ 5.596643] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20121018/evregion-501)
[ 5.596666] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECW1] (Node ffff88021548f600), AE_TIME (20121018/psparse-537)
[ 5.596683] ACPI Error: Method parse/execution failed [\ECWB] (Node ffff88021548f498), AE_TIME (20121018/psparse-537)
[ 5.596692] ACPI Error: Method parse/execution failed [\ECG9] (Node ffff88021548f218), AE_TIME (20121018/psparse-537)
[ 5.596701] ACPI Error: Method parse/execution failed [\_SB_.BAT0._BIF] (Node ffff8802154919c0), AE_TIME (20121018/psparse-537)
[ 5.596720] ACPI Exception: AE_TIME, Evaluating _BIF (20121018/battery-441)
[ 6.096536] ACPI: EC: input buffer is not empty, aborting transaction
[ 6.096627] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20121018/evregion-501)
[ 6.096649] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff88021548f650), AE_TIME (20121018/psparse-537)
[ 6.096667] ACPI Error: Method parse/execution failed [\ECRB] (Node ffff88021548f4e8), AE_TIME (20121018/psparse-537)
[ 6.096677] ACPI Error: Method parse/execution failed [\ECGB] (Node ffff88021548f1c8), AE_TIME (20121018/psparse-537)
[ 6.096686] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VID_.LCD_._ADR] (Node ffff88021548a1f0), AE_TIME (20121018/psparse-537)
[ 6.614634] ACPI: Battery Slot [BAT1] (battery absent)
[ 6.615011] wmi: Mapper loaded
[ 6.628541] input: Dell WMI hotkeys as /devices/virtual/input/input7
[ 6.640518] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input8
[ 6.705860] acpi device:4c: registered as cooling_device4
[ 6.708939] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 6.709042] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 6.709167] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.709300] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
[ 6.709315] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.709326] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[ 6.709335] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.709339] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[ 6.709347] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.709351] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.710160] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20121018/utaddress-251)
[ 6.710169] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.710348] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 6.716297] iTCO_vendor_support: vendor-support=0
[ 6.717020] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 6.717076] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 6.717189] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.725311] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 6.738959] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 6.739096] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 6.739210] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 6.739322] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 6.739429] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 6.739539] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 6.739647] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 7.065643] Adding 9798652k swap on /dev/sda5. Priority:-1 extents:1 across:9798652k SS
[ 7.086079] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 7.132551] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 7.161658] loop: module loaded
[ 8.409597] Bluetooth: RFCOMM TTY layer initialized
[ 8.409614] Bluetooth: RFCOMM socket layer initialized
[ 8.409618] Bluetooth: RFCOMM ver 1.11
[ 8.410182] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.410186] Bluetooth: BNEP filters: protocol multicast
[ 8.410195] Bluetooth: BNEP socket layer initialized
[ 8.665765] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 8.665778] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[ 8.666364] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8.669376] tg3 0000:0c:00.0: irq 45 for MSI/MSI-X
[ 8.764319] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.437616] wlan0: authenticate with 00:24:d4:cf:f1:68
[ 10.437632] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded
[ 10.441111] wlan0: send auth to 00:24:d4:cf:f1:68 (try 1/3)
[ 10.442660] wlan0: authenticated
[ 10.444005] wlan0: associate with 00:24:d4:cf:f1:68 (try 1/3)
[ 10.447030] wlan0: RX AssocResp from 00:24:d4:cf:f1:68 (capab=0x411 status=0 aid=3)
[ 10.447562] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 10.447574] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 10.447581] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 10.447596] wlan0: associated
[ 10.447639] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 10.497699] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
** Model information
sys_vendor: Dell Inc.
product_name: Latitude E5530 non-vPro
product_version: 01
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A07
board_vendor: Dell Inc.
board_name: 05GRXT
board_version: A00
** Loaded modules:
bnep
rfcomm
binfmt_misc
loop
snd_hda_codec_hdmi
snd_hda_codec_idt
iTCO_wdt
iTCO_vendor_support
dell_wmi
sparse_keymap
acpi_cpufreq
mperf
arc4
brcmsmac
cordic
brcmutil
mac80211
cfg80211
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
btusb
videodev
bluetooth
media
rfkill
coretemp
kvm_intel
dell_laptop
dcdbas
kvm
crc32c_intel
psmouse
i2c_i801
snd_hda_intel
serio_raw
snd_hda_codec
ghash_clmulni_intel
evdev
snd_hwdep
cryptd
snd_pcm
snd_page_alloc
lpc_ich
mfd_core
pcspkr
snd_timer
snd
soundcore
bcma
parport_pc
parport
wmi
i915
video
drm_kms_helper
drm
i2c_algo_bit
i2c_core
battery
mei
ac
button
processor
ext4
crc16
jbd2
mbcache
sg
sr_mod
sd_mod
cdrom
crc_t10dif
microcode
thermal
thermal_sys
tg3
ptp
pps_core
libphy
sdhci_pci
sdhci
mmc_core
ahci
libahci
libata
scsi_mod
ehci_pci
xhci_hcd
ehci_hcd
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09)
Subsystem: Dell Device [1028:053d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:053d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f6400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Dell Device [1028:053d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f7f00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Dell Device [1028:053d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f7f1b000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:053d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7f18000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Dell Device [1028:053d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f7f10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: f7e00000-f7efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 [8086:1e14] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=06, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7200000-f7bfffff
Prefetchable memory behind bridge: 00000000f0a00000-00000000f13fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 [8086:1e16] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=0a, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f6800000-f71fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f09fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 [8086:1e1a] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
Memory behind bridge: f7d00000-f7dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.6 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 7 [8086:1e1c] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
Memory behind bridge: f7c00000-f7cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:053d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f7f17000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM77 Express Chipset LPC Controller [8086:1e57] (rev 04)
Subsystem: Dell Device [1028:053d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:053d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 41
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7f16000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
Subsystem: Dell Device [1028:053d]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7f15000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)
Subsystem: Dell Device [1028:0015]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f7e00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: bcma-pci-bridge
0b:00.0 SD Host controller [0805]: O2 Micro, Inc. Device [1217:8221] (rev 05) (prog-if 01)
Subsystem: Dell Device [1028:053d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f7d00000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
0c:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5761 Gigabit Ethernet PCIe [14e4:1681] (rev 10)
Subsystem: Dell Device [1028:053d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f7c10000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at f7c00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
** USB devices:
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 413c:8197 Dell Computer Corp.
Bus 003 Device 004: ID 0c45:6449 Microdia
-- System Information:
Debian Release: 7.0
APT prefers testing
APT policy: (500, 'testing'), (100, 'unstable'), (50, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.8-trunk-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.8-trunk-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.110
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.8-trunk-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.8-trunk-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27
pn linux-doc-3.8 <none>
Versions of packages linux-image-3.8-trunk-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 0.36+wheezy.1
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.36+wheezy.1
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.8-trunk-amd64/prerm/removing-running-kernel-3.8-trunk-amd64: true
linux-image-3.8-trunk-amd64/postinst/depmod-error-initrd-3.8-trunk-amd64: false
linux-image-3.8-trunk-amd64/postinst/missing-firmware-3.8-trunk-amd64:
linux-image-3.8-trunk-amd64/postinst/ignoring-ramdisk:
Reply to: